Linksys Wireless Router :: E2500 Disconnects When Connected With PS3
Aug 8, 2011
I am using a E2500 which is connected to my modem arris model tm602g/115 isp provider is cox. for some reason every1 time my lil bro turn on his ps3 and while im connected to the network it will disconnect me and also he gets disconnected and for some reason we both wont be able to connect to internet. we both are using wireless connection.
Here are my settting on the router. I also 3 have iphones that i want to connect the network with any 1 other device that i would like to connect the network with.
View 4 Replies
ADVERTISEMENT
Dec 12, 2011
I've recently installed the E2500, and it's been mostly great....when it's connected. Set up was easy, all the devices in the house were recognized, the coverage is excellent, and it's nice and fast. But several times throughout the day, the wireless signal will simply drop off. Disconnecting and re-connecting gets it back on, but an hour or two later, it's off again. It;s fairly frustrating because you'll be in the middle of something, and you'll have to manually disconnet, and then reconnect. The status will show as "Local". Running Windows XP with Verizin FIOS. Old Linksys wireless router never had a connection problem.
View 5 Replies
View Related
Mar 20, 2012
My Linksys E2500 wireless router frequently interrupts the connection to my ISP. This happens about 2 times an hour. The connections is - due to the automatic reconnect feature - only interrupted for about 20-30 seconds, but is quite unnerving, as it causes downloads to stop, streams to freeze and website loading failures. The reason I know that the connection is interrupted completely is that my IP address changes every time it happens. I know the failure is not on my ISPs side, since the connection does not interrupt when I connect my PC directly to my DSL-Modem (Siemens C2-010-I). The router runs the newest available firmware (1.0.04 build 1 Dec 26, 2011)
View 9 Replies
View Related
Dec 13, 2012
I have a Cisco/Linksys E2500 router that I have had for over a year and it has worked without issues for over a year. However my wireless ISP just switched my CPE from A Mikrotik wireless radio to a Ubiquiti wireless radio. As soon as they did this my PPPOE sessions from the E2500 (acting as my PPPOE client) start disconnecting and reconnecting every few minutes causing major problems with my internet and voip connectivity when it looses connectivity every few minutes.
The strange things is if I connect my much older WRT54G router as a PPPOE client (with the same exact PPPOE configuration), it works just fine and I don't have any PPPOE disconnects.
I upgraded to the latest firmware on my E2500 and nothing changed, it still disconnects my PPPOE sessions probably close to 50 or 100 times an hour.
I'm thinking it's some sort of compatibility issue between the Ubiquiti Nanobridge Radio CPE and the E2500 router acting as my PPPOE client. Also another thought was that perhaps my ethernet port wasn't negotiating speed/duplex correctly on the E2500.
Is there any way to hard code the speed/duplex on an E2500? I can't seem to find any spot with that setting.
View 8 Replies
View Related
Feb 13, 2012
So i just set up the Linksys E2500 and it shoes 8 devices connected to my router. How I can see what devices are connected?
View 1 Replies
View Related
Jan 31, 2013
Everything in our small network worked until today when I had to manually reset the router. We run a application through a provider which requires that we view it from the same IP address for access. We have a statis IP assigned by our ISP solely for this purpose. For simplicity, lets us 23.11.23.176 as the statis assigned by our ISP and 23.11.23.175 as the gateway also assigned by our ISP. The application we need to browse requires that we use the 23.11.23.175 address else it is blocked from viewing. When we hard line into the modem, we are able to browse it fine. When I connect the CISCO router and do it wirelessly, it shows our address as 23.11.23.176 what are the required steps in order to set the CISCO router to use the Gateway address as the browsing IP for computers connected to it. We had set it up about a year ago, and i completely forgot how.
View 2 Replies
View Related
Jul 7, 2011
I bought I router today, Linksys E2500 and set it up, for some reason its connected with full strength but the internet does not work on my computer, or any other device connected to the network I established on the router. I've looked through so many articles and posts on here, I've fixed the winsock, I tried the netsh winsock and the netsh int ip reset reset.log, but when I put in netsh int ip reset reset.log in the command prompt, nothing happens after I press enter. I've updated through microsoft updates, and updated some drivers from the hp website. Ive repaired, and tried restarting the router, and even the modem and nothing changed. It's still connected, but the interenet still is not working. The modem is fine, as when I disable the wireless connection, the internet works. Yes, I have Sp3 installed.I am using windows xp and the computer is called HP Pavilion a1013w Desktop PC. [code]
View 5 Replies
View Related
Dec 28, 2011
Well i recently purchased a Linksys e2500 router,so i connect it to my modem and then to my PC, all by Ethernet cable(no wireless) as i want my pc connected by cable, i go through the set up CD and it finishes and says you are now connected to your router but..... not to the internet and it tells me to restart the modem with i have done, i have also tried power cycling modem, router and PC, but i still get the same old problem and when i go in network connections my local area connection says i am connected but it wont let me use the internet. also above when i have been trying to set up the router this "Internet Gateway" pops up in my network connections and it is disabled and whenever i try to enabled it it just says failed.
I'm on Cable broadband my modem is a Motorola SB5101 SURFboard cable modem and the router is an Linksys Cisco e2500 and i am using windows xp sp 3
View 4 Replies
View Related
Apr 4, 2013
desktop with Windows 7. It is connected to the internet in my office thru Uverse (AT&T). We previously had a standard router, but upgraded since it seemed to be moving too slow. This problem with the adapter existed then also and we thought maybe it was too many computers slowing down the router.The adapter works great until I try to open certain websites. Then it loses its mind. I get a popup that says "Dial Up Connection" and wants me to choose to connect or work offline. When I click connect, I get a second window that says "Connecting through WAN Miniport", but it never actually connects to the page. Then lastly, a third popup says it has an error connecting and wants to redial and starts a countdown. But again, it never connects to the page.
View 3 Replies
View Related
Jul 7, 2011
I bought I router today, Linksys E2500 and set it up, for some reason its connected with full strength but the internet does not work on my computer, or any other device connected to the network I established on the router. I've looked through so many articles and posts on here, I've fixed the winsock, I tried the netsh winsock and the netsh int ip reset reset.log, but when I put in netsh int ip reset reset.log in the command prompt, nothing happens after I press enter. I've updated through microsoft updates, and updated some drivers from the hp website. Ive repaired, and tried restarting the router, and even the modem and nothing changed. It's still connected, but the interenet still is not working. The modem is fine, as when I disable the wireless connection, the internet works. Yes, I have Sp3 installed. I am using windows xp and the computer is called HP Pavilion a1013w Desktop PC.
Heres my Ipconfig /all while my wireless connection is disabled:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsOwner>IPCONFIG /ALL
[Code].....
View 3 Replies
View Related
Jan 18, 2012
Issue: Working on the internet, my computer (LAN) disconnects, Laptop (WAN) disconnects, but the router does not disconnect. The light that shows connection to net flashes like crazy (showing ADHD *** activity), the network lights just stay stable (showing no activity).After 5-10 minutes the problem sometimes fixes itself, or, more likely, I unplug the router, wait 2 minutes, plug it back in. Sometimes it works right away, sometimes it takes a second unplug.My computer is wired to the router which connects to a modem. The modem is not mine, its installed by my ISP.
Failed attempts to fix:Replace router. Bought brand new Netgear (will put numbers in here later) to replace the Dir-825.Same issues.In fear of malware, spyware, etc (I run a tight ship on my computer, I love it dearly and I'm mildly paranoid), I formatted the SSD, reinstalled Windows 7 64bit. Same issues.My ISP has to authorize every connection, so I've used the router to use my Mac Address and I can connect with the cable directly in the back of the computer, or to the router
View 12 Replies
View Related
Sep 5, 2011
I'm currently setting the MAC address filtering for my Linksys E2500 router. I have about 20 devices which i'm allowing to access my router, so i keyed in the MAC addresses into the config page and save setting. But only 16 addresses are registered, the rest refused to register no matter how many times i key in, it just reset back to 00:00:00:00:00:00 after i click on save setting.
View 4 Replies
View Related
Oct 4, 2012
I previously entered in settings for the "Static DNS" 1 through 3 (using ip addresses from OpenDNS and one from Google DNS).
I want to remove these so the router reverts to using the DNS allocated to it by the ADSL modem (which will likely be the IP of the modem, which then forwards the requests to the DNS from the ISP).But I can't clear the Static DNS settings. I have to put in 0.0.0.0 but the last zero is not accessed. I get the error: The value is out of range [1 - 254].So I end up with 0.0.0.1 and then all Internet access is lost on the computers because they are being given a bad DNS IP.
How can I reset the static DNS ip address back to 0.0.0.0 ?
View 4 Replies
View Related
Oct 23, 2012
I bought 2 weeks ago a Linksys EA4500 after searching the best Wi-Fi Router all over the net... I choose this cos all over people writed that it was amazing, fast a nd very good coverage all over the house.
Before I had a Buffalo AirStation Dual Band, wich worked perfectly. But since I have several tv and a central NAS whit all films in MKV, I wanted the BEST product for my system, so I choosed Linksys EA4500!
Well, the result is that (when it works it is greate) but sometimes it disconnects and I have to restart it... And second thing that makes me MAD is that the coverage in my house is WORST!! Before my Wi-Fi was present in all the house, now in some parts doesn't work! The position is the exact same of the Buffalo, so it's not a problem of position... I tryed also a router of 40€ and it has a better coverage! How come? how is it possible that a person pays more than 200$ (in Italy it costs 185€) and the result is so BAD??? I'm totaly freak about Linksys now.
View 2 Replies
View Related
Feb 28, 2013
I am trying to connect to a new VPN using my E2500 router. As soon as I connect, the connection breaks.
View 1 Replies
View Related
Sep 3, 2012
i buy a new e2500 from staples. but when i try to register the product. it shows me "Serial Number you entered is invalid.". i am sure i choose the right product and number to register.. so is that mean some one used it..
View 3 Replies
View Related
Dec 18, 2012
I want to add my E2500 as a second wireless router to cover my entire house.I have a Motorola Surfboard SBG6580 cable modem (Time-Warner) at one end of the house.I added via powerline Ethernet connection a new E2500 wireless router at the other end of the house.The E2500 set-up with all defaults and has the same SSID and Password as the Surfboard cable modem.It seems to work OK, but I wonder about network confusion/interference.Do I have to configure the E2500 in some manner to allow seamless roaming of my wireless devices (iPad, Cell Phones, Netbook)?I had an RE1000 with just the Surfboard, but it did not quite do the trick, and does not like both routers connected at either end.
View 9 Replies
View Related
Nov 23, 2011
How To Reset E2500 Router
View 1 Replies
View Related
Jan 23, 2012
I am trying to setup a WAP with my linksys 2500. I am currently using a Gateway connected to my DSL and am looking to set up the access point through the E2500.
View 1 Replies
View Related
Nov 18, 2011
So, i have a e2500 router and find that every so often, I have to unplug it and reset it because I am losing my internet connection.
View 7 Replies
View Related
Dec 22, 2012
How to set router to use as Slind Box Pro?
View 3 Replies
View Related
Jan 4, 2012
I currently have my E2500 connected via wired LAN (not WAN) port on another router. The E2500 has an LAN IP of 10.0.0.2 and the router has 10.0.0.1 and a dhcp range outside of these. DHCP is disabled on the E2500. I can use my E2500 as a wired access point with no difficulty I plug something in and it calls the router and gets an address, but I can not get DHCP through the wireless of the E2500.
View 2 Replies
View Related
Aug 7, 2011
I have Time Warner as my internet company. I recently purchased a new Linksys Router Mode E2500 because I have been having issues with my old router. My internet was disconnecting sporadically. After connecting the new router, a started getting the same issue. I replaced my internet cable modem to a Cisco 2100 modem (provided by Time Warner). I noticed that the issue keeps happening sporadically which makes me believe it is my Linksys router. Every time a new wireless connection is connected, my modem circuit dies. This happens sporadically.
View 4 Replies
View Related
Dec 27, 2011
I have bought and installed an E2500 router 4 days ago. Installation of router and network using Cisco Connect was easy and without problems. However, after 4 days of usage, not changing anything in the network nor running Cisco Connect or accessing the web interface, I tried to start Cisco Connect and got the message "Cannot access your router".Internet is running, router is accessible via 192.168.1.1 in a browser window, Cisco Connect also works fine on my laptop.The only solution I found on this forum is: reset your router and reinstall Cisco Connect.and then every 4 days resetting my router and reinstalling the software?
View 4 Replies
View Related
Apr 20, 2013
My network consists of a Westel C90-610030-06 DSL modem, Cisco E2500 router and Hawking HWREN100 range extender.My wife has trouble with her IPad connecting to the Hawking.Apple says I need to Disable WMM on the E2500.
View 2 Replies
View Related
Jun 26, 2012
I am working with vpn setups for the first time. I would like to be able to connect to a computer on a home network through a linksys E2500 router. I have found alot of documentation on connecting to an external vpn from a computer on the lan side of the router, but nothing on connecting from the outside in. The router does have a static ip address with my internet provider, so I can contact the router from the outside. But makeing the connection to the computer on the other side of the router is where I am missing something or I dont realize that it is not possible. On the LAN side I am using DHCP to assign the address to the computer I want to connect to. Perhaps I need to make it have a static address also? I realize that when I configure the connection from the outside that I need to direct the connection to the remote computer in some way, unless vpn connections are fully passed through the router and the connection issue I am having is with the "inside" computer.
View 2 Replies
View Related
Jan 9, 2012
Got a problem with my new Linksys E2500 router. I have a Huawei Smart Ax MT882 cable modem, that connects to my desktop through an Ethernet cable, it works fine.
Recently i bought a notebook and i thought i could have a wireless connection, using the modem as well... So I bought a E2500 router, that is connected with Ethernet cables to the desktop and the Smart Ax MT882 modem.
It happens that i am not able to setup the configurations to make this work (This router does not supported by my ISP provider).
View 9 Replies
View Related
May 10, 2012
I have an E2500 configured inside my network. It is configured to give wireless PCs (This subnet is connected to a Lan port with 10.30.0.0 address) another subnet than wired PCs (this subnet is connected to Wan port 192.168.0.0). Since i configured i can access from wireless PCs to servers and PCs in the wired subnet but cannot access from wired computers from to wireless PCs. I suppouse it is because traffic is restricted from Wan to Lan.
View 5 Replies
View Related
Feb 1, 2012
I have a E2500 connected via LAN to my network via a switch or hub through a sonic wall and into the modem out to the internet. The problem is that I am only getting +/- 5Mpbs Down and +/-7 Mbps up through the router.
If I connect my computer to the network with out going through the router my speeds are more in the range of +/-28 Mbps down and 16Mbps up. I have been working with Linksys support but they have not been able to assist me with this yet! Is there any configuring I should be doing at the firewall or to the router to tell it to open up the port for faster speeds?
View 1 Replies
View Related
Sep 10, 2012
I'm having getting my E1200 to work is this; I'm connected wirelessly with an N-adapter to the router, my roomate is connected directly with an Ethernet cable and to the modem. Whenever he logs ons or logs off from internet I GET DISCONNECTED! Its very frustrating. At first I kept wondering why I would get frequent Disconnects, until I matched exactly the times he would log on or log off. I've never seen this type of problem before in my previous router?
View 9 Replies
View Related
May 4, 2012
My WAG120N wireless router disconnects every hour, precisely at the same time. This problem has started a few days ago, until then everything was fine.When the connection is gone, the "Internet" light goes off, the other lights remain on. For example, it disconnects at 07:30. It takes a minute or two to reconnect. Then it disconnects at 08:31. It reconnects, and then disconnects at 09:32.. and so on.Here are the things that I have tried (with my limited knowledge.. I'm not good with technology):- Turned the power on/off. No matter what time I do this at, the router disconnects at the same time again. For example, if it last disconnected at 07:30, and I turn it off and on at 7:50, it still disconnects at 08:31.- I tried resetting it, by pushing and holding the reset button on the back for 30-60 seconds (did it several times). Reconfigured the router (manually, not from a backup config file). Same situation as above, disconnects at the same time as always.
- I upgraded the IOS to v1.00.16, which I found here: [URL] reset and then reconfigured again. Still it didn't work.- Looked in the configuration pages for any values that resemble a 60 minute time span, and changed them. Only thing I found was the security key renewal period. Or was I sold a faulty product?
View 6 Replies
View Related
Mar 20, 2012
i recently bought an E1200 to replace my old Linksys router that died. I set it up smoothly and i can connect any device to it easily. But i have one major problem with it, it always disconnects every time at 1am or something. I usually leave my PC to sleep mode and when i wake up i just take it off sleep mode, now i had this router for about 4 days and every morning when i turn the PC on the internet connection is gone/disconneted. I cant repair it from the Network Sharing Center, i need to restart it THEN repair it and it always says that the Local Area Connection is disabled even though i didnt even touch any of it. I tried putting it in sleep mode in the morning and then turning it on again but the internet is still connected, it just happens when i go to sleep at night, really weird.
View 3 Replies
View Related
Apr 2, 2013
I'm being kicked off my VPN connection back to the home office on occasion, using a Nortel VPN client. The logs show:
4/2/2013 9:58:26.883 [ENGS] -I-VerifyServerIsAlive: ISAKMP had traffic (after keepalive).
4/2/2013 9:58:27.383 [ENGS] -I-VerifyServerIsAlive: Set receivedData FALSE.
4/2/2013 9:58:28.555 [ENGS] -I-Protocol not recognized - message dropped.
4/2/2013 9:58:44.586 [ENGS] -I-Protocol not recognized - message dropped.
[code]....
the common fault seems to be DynamicDnsCleanup causing the trouble.(causes routing table to change, knocking down the VPN....) Is this a function occurring in the router? I can't find search results showing so.
View 7 Replies
View Related
