Linksys Wireless Router :: E2500 - Configuration Set Up
Jan 9, 2012
Got a problem with my new Linksys E2500 router. I have a Huawei Smart Ax MT882 cable modem, that connects to my desktop through an Ethernet cable, it works fine.
Recently i bought a notebook and i thought i could have a wireless connection, using the modem as well... So I bought a E2500 router, that is connected with Ethernet cables to the desktop and the Smart Ax MT882 modem.
It happens that i am not able to setup the configurations to make this work (This router does not supported by my ISP provider).
View 9 Replies
ADVERTISEMENT
Sep 17, 2011
I have a Cisco e2500 and I want to extend my network by connecting my old Linkysys G router to it. There are plenty of instructions on the net, and I get all the up to providing a new IP to the second (old) router. As soon as I give it a new IP, I can't connect to it to continue the configuration!For instance, when I change the IP from 192. 168. 1.1 to 192.168.1.2 on the second router, I cant get my browser to hit it and open and admin page. I tried a bunch of values in the last part of the IP, and none work.
View 1 Replies
View Related
Mar 6, 2012
what user name do I use to access the E2500 configuration panel. I have used the computer name, adm, adim, and the router default password and I canot log on to the configuration panel.
View 1 Replies
View Related
Aug 12, 2012
I set up a basic Linksys E2500 with the following information and connected to the internet straight away without a problem: I have spent several hours simply trying to get this basic information into the Cisco 819 using CP Express without success, i.e. I get no internet. Rather than show my inputs, What is the correct setup. I am a novice so I'd rather solve this issue using CP Express just to get connected in the first instance. I have a static IP address, I connected the ethernet cable carrying the internet to the internet port of the E2500 and an ethernet cable from one of the ethernet ports of the E2500 to my PC. For the 819, I connected the internet cable to the GE WAN 0 port and the PC to one of the FE ports.
View 18 Replies
View Related
Sep 5, 2011
I'm currently setting the MAC address filtering for my Linksys E2500 router. I have about 20 devices which i'm allowing to access my router, so i keyed in the MAC addresses into the config page and save setting. But only 16 addresses are registered, the rest refused to register no matter how many times i key in, it just reset back to 00:00:00:00:00:00 after i click on save setting.
View 4 Replies
View Related
Oct 4, 2012
I previously entered in settings for the "Static DNS" 1 through 3 (using ip addresses from OpenDNS and one from Google DNS).
I want to remove these so the router reverts to using the DNS allocated to it by the ADSL modem (which will likely be the IP of the modem, which then forwards the requests to the DNS from the ISP).But I can't clear the Static DNS settings. I have to put in 0.0.0.0 but the last zero is not accessed. I get the error: The value is out of range [1 - 254].So I end up with 0.0.0.1 and then all Internet access is lost on the computers because they are being given a bad DNS IP.
How can I reset the static DNS ip address back to 0.0.0.0 ?
View 4 Replies
View Related
Feb 28, 2013
I am trying to connect to a new VPN using my E2500 router. As soon as I connect, the connection breaks.
View 1 Replies
View Related
Sep 3, 2012
i buy a new e2500 from staples. but when i try to register the product. it shows me "Serial Number you entered is invalid.". i am sure i choose the right product and number to register.. so is that mean some one used it..
View 3 Replies
View Related
Dec 18, 2012
I want to add my E2500 as a second wireless router to cover my entire house.I have a Motorola Surfboard SBG6580 cable modem (Time-Warner) at one end of the house.I added via powerline Ethernet connection a new E2500 wireless router at the other end of the house.The E2500 set-up with all defaults and has the same SSID and Password as the Surfboard cable modem.It seems to work OK, but I wonder about network confusion/interference.Do I have to configure the E2500 in some manner to allow seamless roaming of my wireless devices (iPad, Cell Phones, Netbook)?I had an RE1000 with just the Surfboard, but it did not quite do the trick, and does not like both routers connected at either end.
View 9 Replies
View Related
Nov 23, 2011
How To Reset E2500 Router
View 1 Replies
View Related
Jan 23, 2012
I am trying to setup a WAP with my linksys 2500. I am currently using a Gateway connected to my DSL and am looking to set up the access point through the E2500.
View 1 Replies
View Related
Nov 18, 2011
So, i have a e2500 router and find that every so often, I have to unplug it and reset it because I am losing my internet connection.
View 7 Replies
View Related
Dec 22, 2012
How to set router to use as Slind Box Pro?
View 3 Replies
View Related
Jan 4, 2012
I currently have my E2500 connected via wired LAN (not WAN) port on another router. The E2500 has an LAN IP of 10.0.0.2 and the router has 10.0.0.1 and a dhcp range outside of these. DHCP is disabled on the E2500. I can use my E2500 as a wired access point with no difficulty I plug something in and it calls the router and gets an address, but I can not get DHCP through the wireless of the E2500.
View 2 Replies
View Related
Aug 7, 2011
I have Time Warner as my internet company. I recently purchased a new Linksys Router Mode E2500 because I have been having issues with my old router. My internet was disconnecting sporadically. After connecting the new router, a started getting the same issue. I replaced my internet cable modem to a Cisco 2100 modem (provided by Time Warner). I noticed that the issue keeps happening sporadically which makes me believe it is my Linksys router. Every time a new wireless connection is connected, my modem circuit dies. This happens sporadically.
View 4 Replies
View Related
Dec 27, 2011
I have bought and installed an E2500 router 4 days ago. Installation of router and network using Cisco Connect was easy and without problems. However, after 4 days of usage, not changing anything in the network nor running Cisco Connect or accessing the web interface, I tried to start Cisco Connect and got the message "Cannot access your router".Internet is running, router is accessible via 192.168.1.1 in a browser window, Cisco Connect also works fine on my laptop.The only solution I found on this forum is: reset your router and reinstall Cisco Connect.and then every 4 days resetting my router and reinstalling the software?
View 4 Replies
View Related
Apr 20, 2013
My network consists of a Westel C90-610030-06 DSL modem, Cisco E2500 router and Hawking HWREN100 range extender.My wife has trouble with her IPad connecting to the Hawking.Apple says I need to Disable WMM on the E2500.
View 2 Replies
View Related
Jun 26, 2012
I am working with vpn setups for the first time. I would like to be able to connect to a computer on a home network through a linksys E2500 router. I have found alot of documentation on connecting to an external vpn from a computer on the lan side of the router, but nothing on connecting from the outside in. The router does have a static ip address with my internet provider, so I can contact the router from the outside. But makeing the connection to the computer on the other side of the router is where I am missing something or I dont realize that it is not possible. On the LAN side I am using DHCP to assign the address to the computer I want to connect to. Perhaps I need to make it have a static address also? I realize that when I configure the connection from the outside that I need to direct the connection to the remote computer in some way, unless vpn connections are fully passed through the router and the connection issue I am having is with the "inside" computer.
View 2 Replies
View Related
May 10, 2012
I have an E2500 configured inside my network. It is configured to give wireless PCs (This subnet is connected to a Lan port with 10.30.0.0 address) another subnet than wired PCs (this subnet is connected to Wan port 192.168.0.0). Since i configured i can access from wireless PCs to servers and PCs in the wired subnet but cannot access from wired computers from to wireless PCs. I suppouse it is because traffic is restricted from Wan to Lan.
View 5 Replies
View Related
Feb 1, 2012
I have a E2500 connected via LAN to my network via a switch or hub through a sonic wall and into the modem out to the internet. The problem is that I am only getting +/- 5Mpbs Down and +/-7 Mbps up through the router.
If I connect my computer to the network with out going through the router my speeds are more in the range of +/-28 Mbps down and 16Mbps up. I have been working with Linksys support but they have not been able to assist me with this yet! Is there any configuring I should be doing at the firewall or to the router to tell it to open up the port for faster speeds?
View 1 Replies
View Related
Jul 31, 2011
I just bought a linksys wireless n dual band router e2500 and i want to make my old wrt54g router as an access point. how do i do this and where to start?
View 11 Replies
View Related
Mar 13, 2013
I just installed the E2500 wireless router, and it works great for all devices we've tried so far. Here's the thing: we have a laptop that has been humming perfectly along for more that 12 years because we have never let it be touched by the internet. It has built in wi-fi, but we've never connected it. It has no viruses, no Microsoft creep, we've never had to purchase a virus software update and it has outlasted every piece of computer equipment we've ever owned. We'd like to keep it that way!
But now that the wireless printer is working beautifully, we want to know if there's a way to send the laptop through the router to the wireless printer, but not expose it to the internet. Is that possible?
View 3 Replies
View Related
Mar 5, 2012
how to update Cisco FIrmware ... it is like brick....no responce from router.. i have tried With Linksys TFTP,, just coppying successful and not working..
View 1 Replies
View Related
May 3, 2012
can't connect all my devices like an Iphone, Nook or another computed to the wireless network with the e2500, we have three devices but the others can't connect.
View 3 Replies
View Related
Aug 15, 2012
I have an E2500 wireless N router that I recently bought to replace a cheapie netgear that I lent to family. The router is in the basement near a bunch of metal ducting and I live near a radio station, both of which I believe is killing my signal. Anyways, I was able to pick up a WAP54G wireless access point. I would like to use it as a wired repeater (hopefully to get the signal up into the upper levels of my house). Can I use the WAP54G with the E2500? I looked in the setup page when I was trying to set it up as a repeater, and it says it will only connect with another WAP54G or a WRT54G (linksys wireless g router).
View 6 Replies
View Related
Jun 9, 2012
I have a CradlePoint MBR900 router where I use an air-card to get internet.Since the E2500 broadcasts better, I would like to use it as my main wireless device.I have a cable connecting a standard ethernet port from the MBR900 to one of the standard ports on the E2500.Then, I have my computer plugged into another of the ports from the E2500.This enables me to access the internet.However, when I run the setup.exe from the Linksys CD, the application cannot detect the E2500.I also tried to use http to connect via 192.168.1.1 and I cannot connect to it that way
View 9 Replies
View Related
Apr 10, 2013
I bought the new E2500 Router about 5 months ago and it was great until one day the wilreless part would not give me any speed at all. I ran a wired test of the router and I would get full 30Mbps speed that I'm supposed to get. So after firmware updates and everything else I took it back and got another one.It has worked great for a month and today it's now doing the same wilress slow down issue. I can run a lan connected test and get full speed. But wireless is bouncing around at 5Mbps~13Mbps. No where near the 30Mbps I'm supposed to be getting. What is causing the wireless to bomb like this?
View 1 Replies
View Related
Jan 4, 2012
I just purchased the E2500 and both bands are only broadcasting transfer rates at 144N instead of the advertised 300N. My old router broadcast at the 300N rate on the same ISP serving a range of devices. I contacted chat support and tried to discuss the issue for about 30-60 minutes before getting fed up with the lack of progress on the issue. The gist I got from the support agent was that I would only be able to achieve the 300N rate in N only mode instead of the mixed mode. I don't know the available modes of all the client devices that would need to connect but this would not be acceptable as my old router was capable of serving the range of devices while also giving the max rate of 300N to those devices that could utilize it. I verified the difference in transfer rates using [URL] with my old router giving the higher rates expected from 300N over 144N.
View 2 Replies
View Related
Feb 20, 2012
I am using the E2500 with the Wireless N-pci adapter with dual band, both with the latest drivers / firmware, and I am getting extremely low signal quality and connection speed when connecting to the 5 Ghz network.My computer is no more than 15 feet away from the router, and on the same level. I also verified the connection with the 2.4 Ghz band, and it reads as excellent, and with 54 mps. Using 5 Ghz I get one bar of signal quality (very poor) and no more than 13 mps connection speed.
View 9 Replies
View Related
Aug 8, 2011
I am using a E2500 which is connected to my modem arris model tm602g/115 isp provider is cox. for some reason every1 time my lil bro turn on his ps3 and while im connected to the network it will disconnect me and also he gets disconnected and for some reason we both wont be able to connect to internet. we both are using wireless connection.
Here are my settting on the router. I also 3 have iphones that i want to connect the network with any 1 other device that i would like to connect the network with.
View 4 Replies
View Related
Jul 25, 2011
Since recently replacing my home router with a Linksys E2500, I have been getting Blue Screen of Death (BSOD) with my Company's VPN (AT&T). It only happens when I am running wireless with my E2500. If I am hooked up to my E2500 through a ethernet cable it doesn't happen. I have updated the BIOS on my Lenovo Thinkpad T410 and ensured all of my drivers are up to date. I am 99.9% sure the problem is caused by my Linksys E2500 because I have used my laptop on other wireless routes at work and school and never get this problem. I am also ensured that my E2500 has the current firmware installed and upgraded my Company's VPN to the most current level to no avail.
I am getting DRIVER_IRQL_NOT_LESS_OR_EQUAL Blue Screen of Death in agnfilt.sys.
View 9 Replies
View Related
Apr 21, 2012
I bought a new e2500 and it is working fine, all but port forwarding. This is not even close to my first router and I am advanced when it comes to setting these up. I have tried for days to get port 80 to open up and it refuses. Now I do notice that when you access the router setup through a web interface, it uses port 80. I have forwarded port 80 to the ip address of the device, put in a reservation in DHCP with MAC address, etc. etc. and still nothing. Heck, I have even turned that specific device IP into a DMZ, and it STILL will not work.For the record, I had an e2000 set up the exact same way and it worked just fine and I was able to access port 80.
View 6 Replies
View Related
Oct 1, 2012
I upgraded my E2500 with the last version of firmware but now is dead. the power led is turn on, but the ping are discontinued. the other problem is that after 10/15 sec, the router will restart automatically. i try with tftp but after the reset of router does not change anything.
View 5 Replies
View Related
