Linksys Wireless Router :: E2500 Frequently Disconnects From Internet?
Mar 20, 2012
My Linksys E2500 wireless router frequently interrupts the connection to my ISP. This happens about 2 times an hour. The connections is - due to the automatic reconnect feature - only interrupted for about 20-30 seconds, but is quite unnerving, as it causes downloads to stop, streams to freeze and website loading failures. The reason I know that the connection is interrupted completely is that my IP address changes every time it happens. I know the failure is not on my ISPs side, since the connection does not interrupt when I connect my PC directly to my DSL-Modem (Siemens C2-010-I). The router runs the newest available firmware (1.0.04 build 1 Dec 26, 2011)
View 9 Replies
ADVERTISEMENT
Dec 12, 2011
I've recently installed the E2500, and it's been mostly great....when it's connected. Set up was easy, all the devices in the house were recognized, the coverage is excellent, and it's nice and fast. But several times throughout the day, the wireless signal will simply drop off. Disconnecting and re-connecting gets it back on, but an hour or two later, it's off again. It;s fairly frustrating because you'll be in the middle of something, and you'll have to manually disconnet, and then reconnect. The status will show as "Local". Running Windows XP with Verizin FIOS. Old Linksys wireless router never had a connection problem.
View 5 Replies
View Related
Jul 31, 2012
I have a LinkSys WRT54G Wireless-G Broadband Router located in my basement office. My IBM T42 ThinkPad running Windows XP Pro has an Intel(R) PRO Wireless 2200BG Network Connection adaptor. The signal strength on the main floor of our townhouse is ~ 80%. My problem is the signal frequently disconnects then recovers automatically causing frustration when browsing the internet. My question: Should I upgrade to a new Wireless N router OR purchase a WiFi Range Extender? since my laptop has a Wireless-G adaptor would a Wireless-N router provide a stronger signal?
View 4 Replies
View Related
Aug 8, 2011
I am using a E2500 which is connected to my modem arris model tm602g/115 isp provider is cox. for some reason every1 time my lil bro turn on his ps3 and while im connected to the network it will disconnect me and also he gets disconnected and for some reason we both wont be able to connect to internet. we both are using wireless connection.
Here are my settting on the router. I also 3 have iphones that i want to connect the network with any 1 other device that i would like to connect the network with.
View 4 Replies
View Related
Dec 13, 2012
I have a Cisco/Linksys E2500 router that I have had for over a year and it has worked without issues for over a year. However my wireless ISP just switched my CPE from A Mikrotik wireless radio to a Ubiquiti wireless radio. As soon as they did this my PPPOE sessions from the E2500 (acting as my PPPOE client) start disconnecting and reconnecting every few minutes causing major problems with my internet and voip connectivity when it looses connectivity every few minutes.
The strange things is if I connect my much older WRT54G router as a PPPOE client (with the same exact PPPOE configuration), it works just fine and I don't have any PPPOE disconnects.
I upgraded to the latest firmware on my E2500 and nothing changed, it still disconnects my PPPOE sessions probably close to 50 or 100 times an hour.
I'm thinking it's some sort of compatibility issue between the Ubiquiti Nanobridge Radio CPE and the E2500 router acting as my PPPOE client. Also another thought was that perhaps my ethernet port wasn't negotiating speed/duplex correctly on the E2500.
Is there any way to hard code the speed/duplex on an E2500? I can't seem to find any spot with that setting.
View 8 Replies
View Related
Oct 13, 2012
My internet disconnects frequently when I'm either gaming or just browsing
View 3 Replies
View Related
May 21, 2011
Recently came back from college to a terrible internet connection that frequently disconnects or drops in speed randomly (for all computers on network). This requires me to perform a hard reset to restore connection. This usually happens at least once a day and sometimes several. Current set up is a Motorola Surfboard SB5100 Cable Modem and a Linksys WRT54GS router.
View 2 Replies
View Related
Jun 27, 2011
My wireless internet constantly disconnects and then reconnects right away for seemingly no reason. I can't find a pattern, sometimes I have no dropouts for 6 hours, sometimes it happens every 20-30 seconds for a few minutes. I've checked online and i tried to do some research on it but i couldnt find an answer, i remember typing something into the cmd and it said that something was disables, just cant remember what i typed into the cmd. Also, when my ISP raises the network speed, my router or whatever it is can't handle it so i disconnect and have to call them to set it down.
View 12 Replies
View Related
Apr 17, 2013
Region : India
Model : TL-MR3040
Hardware Version : V1
Firmware Version : TL-MR3040_V1_120822
ISP : Idea 3G
I am using TP Link 3040 V1 and whenever I am using it with my IDEA 3G dongle model no E1732 it keep on getting disconnected after 15-20 mins.
When i restart the router again it works fine for another 15-20 mins and then again disconnects.
When I use the dongle directly in my laptop it works fine without disconnecting. So the issue is not in the Idea dongle but in the router.
View 8 Replies
View Related
Mar 4, 2011
I'm running Win7 on a Lenovo x200. Has run fine for a year. Lately the wireless card disconnects and the system shows no available card. Have to reboot to reconnectThe card is an Intel 5100 AGN. Have tried uninstalling all software and reinstalling latest drivers from Intel and Lenovo. Have tweaked power saving controls, and tried about every suggestion out there. But the problem persists.
View 1 Replies
View Related
Feb 8, 2013
About a week and a half ago my n5050 began disconnecting from the internet and reconnecting about 20 seconds later. This happens pretty frequently, about once a minute or so. It makes doing anything over wifi almost impossible. Plugging in an ethernet cable (directly from modem or from wireless router) keeps the internet connected. My wife's laptop, coincidentally also a Dell, doesn't have this problem. Neither do mine or my wife's iPhones or my kids' Nintendo DSs. I'm totally lost. I've tried uninstalling the adapter, updating it, updating the firmware on the router, changing the power options on the wireless adapter, changing wireless channels, uninstalled and completely removed AVG 2013, tried a clean boot, and more. I'm getting real close to scrapping this computer and going with another brand...
Here is my system info:
Host Name: OS Name: Microsoft Windows 7 Home Premium OS Version: 6.1.7601 Service Pack 1 Build 7601OS Manufacturer: Microsoft CorporationOS Configuration: Standalone WorkstationOS Build Type: Multiprocessor FreeRegistered Owner:
[Code]......
View 1 Replies
View Related
Sep 27, 2011
My Cisco Access Point AIR-AP521 disconnets every few days and I have to restart the access point to make it work. The System Software Version is 12.4(21a)JA1 and it is acting as a access point. The lastest event logs does not show any critical logs. I am sure that there is no electricity or switch related problem.
View 2 Replies
View Related
Aug 25, 2011
My E2500 was working great for the past 3 months, and now it seems to be broken since I cannot access the internet anymore. I can connect to the router via wireless or wired at 192.168.1.1 and play with all the settings. On the status page, I have entries for Internet IP Address, Default Gateway, DNS1, and DNS2 as though I was connected fine to my DSL modem.If I connect my computer to my DSL modem then I can access the internet perfectly fine, so I know the modem is working. However, if I connect the E2500 to the modem, and then my macbook to the E2500 then I cannot access anything other than the router config pages. I have also tried, from the router admin page, to ping "www.yahoo.com" and "8.8.8.8" to no avail.
I have tried without success:
1. Renewing IP address from the router status page.
2. Cycling the power on the modem.
3. Rebooting the router.
4. Unplugging the power from both the modem and the router for 10 minutes and reconnecting it.
5. Resetting the router by holding down the reset button for 30s.
6. Using a different computer.
7. Turning off the firewall.
8. Reinstalling the firmware (1.0.01 build 3 May 6, 2011)
View 1 Replies
View Related
Aug 1, 2012
I installed an e2500 to my cable modem and everything went perfect. Then 2 weeks later the electricity went off for some power company upgrades. when the power came back on the modem wouldnt connect. I have been through every solution in the cisco articles. The computer connects when directly wired to the modem, so I know there is signal. When I place the router into service and use the ethernet connection the modem no longer displays the active internet led. The e2500 ethernet led to the computer lights and the power led. The Ethernet led from the modem to the router doesn't light. I did a complete reset on the router. The setup software only runs to 75% complete then stops and tells me to check the plugs. Ive checked, replaced and swapped the cables. I've set the MAC to clone, and verified the MAC address via ipconfig. Ive done the complete powercycle at least 20 times.
View 3 Replies
View Related
Jan 31, 2012
I seem to have an issue when with my new E2500 router Version 1 (upgraded to the new fireware - today to elimate issues with that).I had RCN installed a 50MB connection today.When I connect directly to the Modem, I get almost the 50MB of the server, see link from the speedtest. [URL]. However, when i plug the ethernet cable from my Cable Modem to my Wireless Router I get around 15-20MB. Here is an example:[URL]. I know speeds can vary, but if i unplugged and rest within seconds i get my expected 50MB.The cable modem is in the living room, right next to the Wireless Router. I am situated less than 2 metres from the devices when I get results and have full bars.I've tried varying the MTU on manual and also enabled it to adjust as required.
View 8 Replies
View Related
Oct 7, 2012
Currently running Windows 7, with internet explorer. I have most recent firmware installed on my e2500. The unit drops wireless connectivity on an intermittent basis. Sometimes after 5 minutes and sometimes after 20 or 30 minutes.
View 9 Replies
View Related
Jan 22, 2012
Here is my setup.Using all MAC OSX I have AT&T DSL ISP connected to a (ISP provided) Speedstream 5100 Modem.I just purchased a Cisco Linksys 5200 N Router and I cannot access the internet. I followed the set-up instructions to the T but to no avail. I cannot find anything online about these two devices being incompatable. Do I purchase a new modem? If so how can I be sure it's compatible with the router?
View 1 Replies
View Related
Mar 1, 2013
I bought the router E2500 and I followed the steps for its configuration. It so happens that most of the time I turn on my router, it does not connect to microcomputer, because it loses the internet settings, requiring that I turn the CISCONNECT and after that, I have to turn off the microcomputer, wait for 2/3 minutes and then reconnect, for only then will be able to surf the internet. I notice that many times even I doing all this procedure the router does not give access to the internet. What should I do?
View 1 Replies
View Related
Dec 23, 2011
Ok group here's the issue. I have a E2500 router with a wired connection for my sons xbox and 2 laptops connected to it. The laptop I used to set-up the system will usually connect to the router but not allow me through to the internet then after a shutdown and repowering it connects. what to check? The othhitch. Both arer laptop connects without a e running vista home.
View 2 Replies
View Related
Aug 12, 2012
I already have a desktop and modem at home, but I recently bought a new Sony Vaio laptop for college. I also bought a Linksys E2500 wireless router so my laptop could have internet access at home.I inserted the Starter Guide CD into my desktop, created my ID/password, and connected all the cables like it instructed me to but I still couldn't connect to the internet. Instead, several windows popped up with messages like, "Found new hardware. Locate and install driver software, "Insert disc that came with Internet Access Server", and "Windows could not find driver software for your device."When I tried to troubleshoot, I get something like this, "There may be a problem with your DNS - Windows attempted to find www. microsoft.com using DNS, but server responded back with unknown."I also tried inserting the disc into the laptop, but I still didn't recieve any internet connection, but it says that my router was connected.I tried following its advice to restart, unplug cables, and wait 2 minutes but none of it seem to work.
View 3 Replies
View Related
Oct 29, 2011
Due to the way I have my DSL and VOIP TA configured I need to be able to set the subnet mask in the Internet connection. I am currently using the Static IP, putting in an IP of 192.168.1.x with the subnet of 255.255.0.0 when I try to do this it gives me an error saying that 192.168.33.1/255 is reserved for the guest network. I am not using the 33 at all ANYWHERE. If I change the subnet to 255.255.255.0 it will save but I can't connect to the internet with it. My router I just bought today is the E2500 I have an old Linksys WRT model that worked fine with this exact setup for several years before it crashed on me.
View 3 Replies
View Related
Oct 14, 2011
I check all of the settings and changed the channel to see if it works. For some reason it disconnects my wireless internet at random times and i know before it never use to do that before with a older router. There is nothing blocking it, it worked before, and my computers can connect except two. The only thing i can guess is my wireless card.
View 6 Replies
View Related
Feb 15, 2012
I am trying to forward a port to see a camera over the internet. On the single port forwarding screen under Gaming, I have put in port 8090 (Ext and Int),Protocal both, an IP address and Enabled. I have also tried putting in a range, but neither seems to work. After forwarding the port, I check with What's My IP Addrewss to get the external IP, then put the IP in a blank browser page with and without the port number. I have tried this several times without any result.
View 9 Replies
View Related
Dec 27, 2011
I have an E2500 with the latest firmware upgrade (1.0.03). My configuration is simple, I have a fixed IP from my ISP with fixed DNS servers. I have one computer connected via cable and one connected via wireless and a laptop that gets connected on occasion wirelessly as well. I also have an android phone that I sometimes have the networking turned on and sometimes not. That doesn't seem to be affecting the router either as I've lost connections under both circumstances. The only thing I have different is I clone the MAC address as the ISP has my IP linked to my old Linksys MAC.
The problem is I randomly lose connection to the internet, the home network is still up it's just the internet goes down. I could be on the computer or not, sometimes while browsing sometimes after I browse for a while sometimes before I get started. Fortunately its not happened during one of my online games but it has happened just after I log off the game. It usually happens a couple of times a day.
View 6 Replies
View Related
Apr 16, 2013
I will be working from home half the time and am trying to get set up. So here it goes:
Took PC #1 home and hooked everything up. Could access Internet.Had to bring PC #2 home because #1 didn’t have the programs I needed.Hooked #2 up, no internet access.Tried different network cable – no access.Tried different router port – no access. (router port light doesn’t illuminate, neither does port on PC)My personal PC that uses the same router has internet access.Hooked #1 back up as a test – could access internet.Hooked up #2 again, did a Run, cmd, ipconfig and got “media disconnected”I brought #2 back in for a PC tech to look at. He hooked it up in his office, had internet access.Took it back home and hooked everything up.The port lights illuminated on startup; but after it got to the desktop, lights are off.Tried ipconfig again, "media disconnected”. IP address doesn’t display.
All the while I have internet access on my own PC, plus when I hook up #1 to the same port using the same cable, I have internet access, which led me to believe it's something wrong with PC #2.Tech is saying it’s a problem with my router (Cisco E2500), which I restarted too.
View 4 Replies
View Related
Nov 14, 2012
Is there any way to use the e2500 without having hard wired internet access. I would like to use with my wii fii hot spot so that I could use my old printers that are not wireless enbled
View 1 Replies
View Related
Jan 6, 2012
my E2500 drops the internet connection randomly. I have no issues with wired or wireless access to the home network (sharing files, sharing printers etc...). To fix the problem I log into the router and do a soft reboot from the status page.
I posted this earlier and the only response I received was a cut and paste answer to make some changes to my wireless settings. Seriously doubting the relevance of the post I made the changes anyway and as expected nothing changed, the router still loses access to the internet without any warning. When I replied that I hadn't thought that that was the problem but that I HAD made the changes mentioned and as I expected it DIDN'T work I get no response.
View 9 Replies
View Related
Dec 1, 2011
I have in my possession three E2000 and I wanted to buy 3 more, but the model seems to not be on sale anymore so I bought his successor the E2500.In the E2000 I used the Internet Policy menu to block internet access of certain computer by entering their mac address.In the E2500, they seem to have removed this menu to replace it with a Parental Control menu, which offers far fewer options, basically you can only block a computer that is connected to the router, you can not block a pc by the ip or by his mac address.Is there a way to have a menu similar to Internet policy in the E2500? A hidden menu, or a different firmware?
View 1 Replies
View Related
Jan 22, 2012
Purchased E2500 1 week ago. I do not have a problem communicating with the router itself (either hard wired or wireless) but I have been unable to establish a usable internet connection from the router.I live in building that is wired by Restech Services - Ethernet jack in wall - no modem. Connection works just fine if I bypass router and connect directly to PC (windows XP SP3 desktop or windows 7 laptop.),Very difficult to establish any internet connection at all. I have to renew IP address many times or go through re-boot sequence multiple times. Once I get a connection it is unusable. If I attempt to ping a URL (either from PC or from router admin page) it is unable to resolve host. If I ping an IP directly (either from PC or router administrator page) I typically get 60 to 80% packet loss. As noted, if I bypass router and make internet connection directly to PC - no problems - no packet loss.Used Cisco Connect software to set up. On advice of ISP changed MTU from 1500 to 1300. Also registered MAC id with ISP and changed from cloning PC MAC to using the router MAC. Downloaded and installed latest firmware version. Did factory reset and re-configured the whole thing. Double checked and swapped wiring.
View 5 Replies
View Related
Nov 30, 2011
Purchased the E1500, updated the firmware and have excellent wireless connectivity. The problem occurs when I connect for a video chat the internet disconnects and then reconnects.
View 2 Replies
View Related
Feb 24, 2012
In one setup, we have fibre optic connection given by the ISP upto Distribution box inside the house where the fibre optic cable is connected to HUAWEI-ECHOLFIE HG865 terminal .From the RJ 45 port in that device , the ethernet cable goes to the DLINK 8 port switch. All the 8 ports are connected with ethernet cables to 8 rooms going concealed through the wall.
Our ISP person tested the connection by connecting one patch cable (from the DLINK SWITCH via the wall socket)to the WAN port of LINKSYS WRT300N wireless router and connecting other ethernet cable from the lan port of the router to the laptop ,setup the username ,password, encapsulation pppoe and configured the internet .found working. I tried to configure the wireless in the house by fixing LINKSYS access point in some rooms.
Here the problem started. I cannot fix the LINKSYS router inside the DB in front portion of the house since there is no space in that and cannot keep the linksys router outside also, So I kept the linksys router inside one room and tried by connecting cable from the wall socket to a 5 ports mini switch and from the mini switch I connected one cable to WAN PORT of the linksys router and one cable to linksys's lan port because I want to share the internet in all the rooms.
View 1 Replies
View Related
Mar 14, 2013
I purchased and installed the above router to replace a working router that had a problem with our new condo location. The old router couldn't access one of our computers. The EA 3500 worked seamlessly for 6 months. Now the connection fails intermittently (more times off than on) from that one computer. It is two rooms over from the router & modem. These are now in a fixed location that cannot be moved.
View 7 Replies
View Related
Jul 7, 2011
I bought I router today, Linksys E2500 and set it up, for some reason its connected with full strength but the internet does not work on my computer, or any other device connected to the network I established on the router. I've looked through so many articles and posts on here, I've fixed the winsock, I tried the netsh winsock and the netsh int ip reset reset.log, but when I put in netsh int ip reset reset.log in the command prompt, nothing happens after I press enter. I've updated through microsoft updates, and updated some drivers from the hp website. Ive repaired, and tried restarting the router, and even the modem and nothing changed. It's still connected, but the interenet still is not working. The modem is fine, as when I disable the wireless connection, the internet works. Yes, I have Sp3 installed.I am using windows xp and the computer is called HP Pavilion a1013w Desktop PC. [code]
View 5 Replies
View Related
