I have a nas device called mybooklive connected to my linksys e2500 router.Every device that is connected to the router does not append nyc.rr.com except the mybooklive one.I change and mad dhcp reservation for this device with the client name but it still appends. [code]
View 1 RepliesI,ve used a network for a number of years with no problems. I have databases on computer 1 and access them with computer 2. After installing a Cisco e2500 I can connect to the databases but after a short period of time I am disconnected. If I search my network computer 1 is not found. Waiting a few minutes the network will find computer 1 again. At about the same time my firewall software has started to show an attack from an 2 different IP's I don't recognize but its always one of those 2 IP's. I'm assuming the two problems are related. I,ve considered going into my firewall and allowing the unknown IP access, BUT who knows where that IP is coming from. I've checked the Cisco setup but couldn't find an IP address that matched the attacking IP address.
View 1 Replies View RelatedThe WRT110 is hooked up to Cable through Comcast and works fine with LAN connections. The problem comes in with more than one wireless laptop tries to connect. First, it was loaded with 1.0.4 firmware and my girlfriend's XP laptop would connect but drop the connection a lot. My Windows 7 laptop wouldn't connect at all. After trying everything someone recommended upgrading the firmware to 1.0.7. Well, now my Windows 7 laptop connects but the XP laptop will not. The DHCP won't assign it an IP, although it says it's connected.
View 2 Replies View RelatedThe problem is WAP 610n not assigning IP address through DHCP; i have to add IP address mannualy.
just go through the details below:
In my network environment we are using :
CISCO Router 800 series; IP: 192.168.1.1
Domain server with DHCP server : 192.168.1.2
DHCP pool: 192.168.1.234 - 192.168.1.250
WAP IP : 192.168.1.236
WAP configuration :
configuration view : mannual
Wireless band : 2.4 Ghz
Network mode : mixed
channel width: 20 Mhz only
standard channel : auto
SSID broadcast : Disabled [ for security reason]
Security mode : WPA2 Personal
Encryption : TKIP/AES
Firmware : 1.0.01 build 94, Oct 26, 2009
Note: In status menu it is not showing any default gateway.
Encapsulation method in CISCO router : PPPoA [ as instructed by ISP]
I am currently configuring (10) Cisco 891 routers for our remote users. For some reason, I have always had issues getting the wireless running correctly. I currently CAN connect to the Guest SSID but I do not recieve an IP address
[code]...
I have an E1000 wireless router and after rebooting it from the web admin page it won't stop blinking. I tried following the reset instructions on this page but it is still blinking.
[URL]
I can't access 192.168.1.1 via my browser either. Is there anything else that I can try before considering it defective?
my router stop getting internet connection its plugged in but keeps telling me no reset modem or unplug router
View 4 Replies View Relatedmy router stop every exact 3 days, why? when it stop , i don't have net connections and i can't send ping in it?
i try to update de firmware and it do same if i remove de power cable and put it back it start ok?
how i can resolve that?
I cannot get access into my router because it doesn't seem to have a gateway IP address, although it is assigning my computer an IP address.
View 1 Replies View RelatedI've lost connectivity with all but one of the ethernet ports on my E4200 router. My desktop PC was connected to Port 1 but stopped working. Network troubleshooting via my Windows 7 Dell 8300 said I was not connected and to check the cable. I did that with several different cables and tried the usual router and modem reset. Only through trial and error did I find that I could connect to port 4 which is why I am able to write this post. What could have changed to disable ports 1-3 and can I get them working again? No issues with wireless connectivity.
View 3 Replies View RelatedI received a Linksys E1200 from a friend who careless tried to upload an incorrect configuration. After that the device became use full. It don't work at all.
View 1 Replies View RelatedWatch youtube? Router resets! Hookup a wired connection? REBOOT! Hookup a tivo wirelessly, use wifi calling, or listen to spotify.. REBOOT!Is there ANY way for this router to NOT reboot randomly?
View 4 Replies View RelatedI am getting frequent stop pages in streamed video, a message appears on my laptop saying "loading" and a red line beginning traversing the screen. Eventually the line gets across and the video begins again to stream. When I do a speed test I get around 10 Mbps both through the router wireless and hardwired connections. This happens almost every 10 minutes. I have tried rebooting the router and the problem persists
View 9 Replies View RelatedSo I just got this new WRT160Nv2 router. I have (1) wired computer and then my laptop running wireless to it. For the first couple days I had some issues getting consistant internet but after reading some stuff on here I downgraded to the version 8 hardware and it worked GREAT for about 3 days. Now my power light won't stop flashing and I have NO internet connection at all through the router. I have tried to reset the router by holding down the button and also unpluging it but still nothing.
View 9 Replies View RelatedI'm currently setting the MAC address filtering for my Linksys E2500 router. I have about 20 devices which i'm allowing to access my router, so i keyed in the MAC addresses into the config page and save setting. But only 16 addresses are registered, the rest refused to register no matter how many times i key in, it just reset back to 00:00:00:00:00:00 after i click on save setting.
View 4 Replies View Relatedwrt54g v1.1 After setting up the wireless router, I can use the internet on the pc as well as a wireless device. However after putting my pc in standby mode then back on, I can no longer connect to either. I have to restore factory defaults each time and re-enter all passwords and settings.
View 9 Replies View RelatedI previously entered in settings for the "Static DNS" 1 through 3 (using ip addresses from OpenDNS and one from Google DNS).
I want to remove these so the router reverts to using the DNS allocated to it by the ADSL modem (which will likely be the IP of the modem, which then forwards the requests to the DNS from the ISP).But I can't clear the Static DNS settings. I have to put in 0.0.0.0 but the last zero is not accessed. I get the error: The value is out of range [1 - 254].So I end up with 0.0.0.1 and then all Internet access is lost on the computers because they are being given a bad DNS IP.
How can I reset the static DNS ip address back to 0.0.0.0 ?
I have WRT54GL v1.1 with last firmware. How to specify L2TP server by domain name? I see only fields for IP.
View 4 Replies View RelatedI am trying to connect to a new VPN using my E2500 router. As soon as I connect, the connection breaks.
View 1 Replies View Relatedi buy a new e2500 from staples. but when i try to register the product. it shows me "Serial Number you entered is invalid.". i am sure i choose the right product and number to register.. so is that mean some one used it..
View 3 Replies View RelatedI want to add my E2500 as a second wireless router to cover my entire house.I have a Motorola Surfboard SBG6580 cable modem (Time-Warner) at one end of the house.I added via powerline Ethernet connection a new E2500 wireless router at the other end of the house.The E2500 set-up with all defaults and has the same SSID and Password as the Surfboard cable modem.It seems to work OK, but I wonder about network confusion/interference.Do I have to configure the E2500 in some manner to allow seamless roaming of my wireless devices (iPad, Cell Phones, Netbook)?I had an RE1000 with just the Surfboard, but it did not quite do the trick, and does not like both routers connected at either end.
View 9 Replies View RelatedHow To Reset E2500 Router
View 1 Replies View RelatedI am trying to setup a WAP with my linksys 2500. I am currently using a Gateway connected to my DSL and am looking to set up the access point through the E2500.
View 1 Replies View RelatedSo, i have a e2500 router and find that every so often, I have to unplug it and reset it because I am losing my internet connection.
View 7 Replies View RelatedHow to set router to use as Slind Box Pro?
View 3 Replies View RelatedI currently have my E2500 connected via wired LAN (not WAN) port on another router. The E2500 has an LAN IP of 10.0.0.2 and the router has 10.0.0.1 and a dhcp range outside of these. DHCP is disabled on the E2500. I can use my E2500 as a wired access point with no difficulty I plug something in and it calls the router and gets an address, but I can not get DHCP through the wireless of the E2500.
View 2 Replies View RelatedI have Time Warner as my internet company. I recently purchased a new Linksys Router Mode E2500 because I have been having issues with my old router. My internet was disconnecting sporadically. After connecting the new router, a started getting the same issue. I replaced my internet cable modem to a Cisco 2100 modem (provided by Time Warner). I noticed that the issue keeps happening sporadically which makes me believe it is my Linksys router. Every time a new wireless connection is connected, my modem circuit dies. This happens sporadically.
View 4 Replies View RelatedI have bought and installed an E2500 router 4 days ago. Installation of router and network using Cisco Connect was easy and without problems. However, after 4 days of usage, not changing anything in the network nor running Cisco Connect or accessing the web interface, I tried to start Cisco Connect and got the message "Cannot access your router".Internet is running, router is accessible via 192.168.1.1 in a browser window, Cisco Connect also works fine on my laptop.The only solution I found on this forum is: reset your router and reinstall Cisco Connect.and then every 4 days resetting my router and reinstalling the software?
View 4 Replies View RelatedMy network consists of a Westel C90-610030-06 DSL modem, Cisco E2500 router and Hawking HWREN100 range extender.My wife has trouble with her IPad connecting to the Hawking.Apple says I need to Disable WMM on the E2500.
View 2 Replies View RelatedI am working with vpn setups for the first time. I would like to be able to connect to a computer on a home network through a linksys E2500 router. I have found alot of documentation on connecting to an external vpn from a computer on the lan side of the router, but nothing on connecting from the outside in. The router does have a static ip address with my internet provider, so I can contact the router from the outside. But makeing the connection to the computer on the other side of the router is where I am missing something or I dont realize that it is not possible. On the LAN side I am using DHCP to assign the address to the computer I want to connect to. Perhaps I need to make it have a static address also? I realize that when I configure the connection from the outside that I need to direct the connection to the remote computer in some way, unless vpn connections are fully passed through the router and the connection issue I am having is with the "inside" computer.
View 2 Replies View RelatedGot a problem with my new Linksys E2500 router. I have a Huawei Smart Ax MT882 cable modem, that connects to my desktop through an Ethernet cable, it works fine.
Recently i bought a notebook and i thought i could have a wireless connection, using the modem as well... So I bought a E2500 router, that is connected with Ethernet cables to the desktop and the Smart Ax MT882 modem.
It happens that i am not able to setup the configurations to make this work (This router does not supported by my ISP provider).
I have an E2500 configured inside my network. It is configured to give wireless PCs (This subnet is connected to a Lan port with 10.30.0.0 address) another subnet than wired PCs (this subnet is connected to Wan port 192.168.0.0). Since i configured i can access from wireless PCs to servers and PCs in the wired subnet but cannot access from wired computers from to wireless PCs. I suppouse it is because traffic is restricted from Wan to Lan.
View 5 Replies View RelatedI have a E2500 connected via LAN to my network via a switch or hub through a sonic wall and into the modem out to the internet. The problem is that I am only getting +/- 5Mpbs Down and +/-7 Mbps up through the router.
If I connect my computer to the network with out going through the router my speeds are more in the range of +/-28 Mbps down and 16Mbps up. I have been working with Linksys support but they have not been able to assist me with this yet! Is there any configuring I should be doing at the firewall or to the router to tell it to open up the port for faster speeds?