Linksys Wireless Router :: E4200 Front Cisco Status LED
Jul 24, 2011give us the option to disable the front status led too.
View 9 Replies
ADVERTISEMENT
Linksys Wireless Router :: E4200 - No Led To Show Connected Devices Status
Oct 31, 2011I'm thinking of upgrading from my Linksys WRT54G router to the E4200 and though I've goggled. Also, are there no LEDs on this unit to tell you the status of what's connected?
E3000WRT-54GWVC-80N
Linksys Wireless Router :: E4200 Internet Access Status Ok In Router
Nov 4, 2011I am trying to setup my E4200 to my new Cable Modem. I followed all of the procedures. I get Internet access when plugged directly to modem. I cloned the MAC Address and the Stus of the Router displays my current IP's (so I should have Internet). However, when I plug my computer into the Router I get no internet access.
View 3 Replies View RelatedLinksys Wireless Router :: WRT150N All Lights On Front Are Blinking
Feb 9, 2008I had successfully set up my new WRT150N router and it was working. But then it just stopped after about 12 hours. All the lights on the front of the router are blinking. When I directly connect to the router, my computer can't detect it. I've browsed through these forums a bit and tried a few things - the reset button (60 seconds), unplugging the router, downloading the EasyLink Connect tool, but I'm still stuck.
View 5 Replies View RelatedLinksys Cable / DSL :: WAG200G Don't Get Light On Front Panel On Any Of Ports
May 19, 2010I'm having trouble connecting via ethernet to my WAG200G. Everything was working fine a week ago but now, nothing.The problem is only occurring with one computer and I've tried the troubleshooting guide on the website to no avail.When I connect the ethernet cable from my computer to the modem/router, I don't get a light on the front panel on any of the ports. I've changed cables, ports, disabled ZoneAlarm and firewalls and nothing comes up. I've checked the ethernet connection from the computer to another computer and it's working fine.
On a different computer, I have no trouble connecting to the ports and can confirm that 1-4 are working and the lights come up.
Linksys Wireless Router :: Status Light On EA6500 Won't Stop Blinking
May 9, 2013I cannot get access into my router because it doesn't seem to have a gateway IP address, although it is assigning my computer an IP address.
View 1 Replies View RelatedLinksys Wireless Router :: EA6500 Device List Connection Status
Dec 18, 2012I have the Linksys EA6500 with the latest firmware and have a question regarding the device list connection status.Currently, I am seeing devices in the list that have a connection status of live, but they are not even within my home network. What is the update/cycle time for the device list actually checking connection status of a device?In my situation, it has been 3 days (72 hours) since the two device showing as connected have not been connected to my home network/router. Noticed that this inaccurate connection status for these devices is also contributing to the Device Monitr app not showing correct device connection status info.
Would like to have real-time device connection status if possible. This device list is great way to know when device get connected or disconnected which let me know when my kids get home from school or using game console when should be doing homework.
Linksys Wireless Router :: Can't Access Cable Modem Status Page With EA6500
Apr 5, 2013I cannot access my Motorola SB6141 cable modem status page at 192.168.100.1 thru the EA6500 router. I can bypass the router and can connect to the status page with no problem. Is there a setting to change or can I possibly do port forwarding to access it?
View 9 Replies View RelatedHome Network :: Public IP On A LAN Device (in Front Of Router)
Mar 19, 2011I have a video conferencing device that uses a lot of ports and is very bandwidth intensive. I have been messing around with two routers (cheap ISP Thomson and my Netgear DGND3300v2) settings for a couple of months now and I couldn't get it to work properly (ports were getting blocked randomly). I have recently discovered that Netgear has a "secret" page where you can switch the router to a modem mode. I gave the device a public IP and now it works fine (at least so it seems for now). The thing is, I need to connect another device (my PC) to the device via web interface for monitoring purposes. I am wondering what network arrangement would be best for me. I want the video device to have nothing to do with natting or firewalls at all, I want it to have a public IP. However, I also want to be able to connect to it somehow and also share the connection with my PC.
View 14 Replies View RelatedA 100-596 - No Wireless Switch On Front Of Toshiba Satellite Laptop
Oct 3, 2011There is no wireless switch on the front of my Toshiba Satalite A 100-596 Model. How do I turn on Wireless?
View 1 Replies View RelatedThere Is No Wireless Switch On The Front Of Toshiba Satellite Laptop
Sep 26, 2011the F8 ket isn't working, but I am sure there is no wireless switch on the front of my tosbhiba satellite laptop.
View 1 Replies View RelatedLinksys Wireless Router :: Use Cisco VPN Through E4200?
Jul 16, 2012I have an E4200 and the Cisco VPN client on my home computer that I use to access a work network. The VPN client cannot connect unless I either (a) bypass the E4200 and connect directly to my cable modem or (b) disable the SPI Firewalls on the router. I have all the VPN passthroughs set to "enable" on the router, but still cannot connect. The VPN client is using IPSEC over TCP on port 10000.
View 5 Replies View RelatedLinksys Wireless Router :: Can't Log Into E4200
Apr 4, 2012I have a recurring issue with my e4200v1. My wired and wireless connections work fine, but I can't get to the administration website. I have https only set up, and after I get thru the 'certificate error' screen, I get an error that says web page is unavailable. Firfefox tells me that the connection was lost - error 101.I have tried wired and wireless, multiple computers, multiple browsers. I even turned the firewall off on one computer (or I think I did anyway).The only way I know how to fix it is by completely resetting then setting up the router all over again.
View 2 Replies View RelatedLinksys Wireless Router :: E4200 Wan Not Available
Jul 27, 2011Upgraded from WRT610N to E4200. Since upgrading to latest firmware the wan just disappears both 5 and 2.5 Ghz bands. Happened with older firmware but not as often. Using it in briged mode. When this happens I can't even get to the management page with a lan connected pc. Have to do a hard reboot to get it to respond again. This is unacceptable for a router at this price point.
View 2 Replies View RelatedLinksys Wireless Router :: Use Cisco Connect Or Web For New Set Up Of E4200?
Jul 26, 20111. I will be getting a e4200 on Thursday and was wondering if there is any advantage/disadvantage to using the Cisco Connect or just following instructions for manual setup using the web (I did it that way on my last router 6 years ago but was just following a script).?
2. Can I change things using the web after setting up using Cisco Connect or do I have to always use it:?
3. Finally after I set the router up can I just set up other computers in the house as I do now (just plug them in using wire or search for wireless and put in password)?
Linksys Wireless Router :: WAN / LAN Connectivity From Cisco E4200
Sep 25, 2012I am having trouble connecting Cisco E4200 to Mac desktops on WAN/LAN. I can connect to the LAN at all locations with my own laptop through the LAN port, but not the WAN anywhere at the location on laptop or Mac. The WAN is letting me connect and enter the password but does not allow me to surf the internet.
View 5 Replies View RelatedLinksys Wireless Router :: How To Setup E4200 As WAP Only
Jan 5, 2013I am connecting the E4200 to a Sonicwall TZ100. I want the TZ100 to assign IP addresses to devices that connect to the LAN via the E4200.
How do I have the E4200 act as a WAP only or not assign IP addresses and push that responsibility to the TZ100?
I'd still want the E4200 to have a SID key for LAN access security.
Linksys Wireless Router :: E4200 Not Getting IP Address?
Dec 21, 2011I have a 6 month old Cisco e-4200 router that is updated to the latest firmware, connected to a Motorola surfboard modem on Sudden-link in Midland, TX.
I previously used this exact same setup on Cox Cable in Wichita, KS with no problems. Upon setting it up down here I cannot get the router to pickup an IP address. I have Power-cycled everything multiple times, did a complete reset and re-installation of the router software and still no luck. The Sudden-link techs have no idea what is wrong. They said that the modems signal is strong and everything should be working.
Actually I did get it to work once for a couple of days, however when redoing the surround sound system I had to unhook the cable line and it quit working and I haven't gotten it to work again since. I have tried unhooking everything. Turning it all off. Waiting for 5+minutes, and then reconnecting in order: First the modem, then an ethernet cable to the computer which will usually work. But as soon as I unplug the cable from the computer and plug it into the router it stops working.
Linksys Wireless Router :: E4200 Does Not Have Any Provision To Use MAC ID?
May 13, 2013I bought Linksys E4200, at a time that is the TOP of the line Cisco routers for Home use.I noticed a serious usage issue with it, I could not identify which are the wifi devices connected to choose for access restriction or parental controls, as the dialog box state only as "Network device", and software control by Linksys does not have any provision to use MAC ID or any other option "except " looking at the dialog box as "Network device".
View 4 Replies View RelatedLinksys Wireless Router :: Connect E4200 To A Mac Via Afp?
Mar 14, 2011How to connect the e4200 to a mac via afp? Trying to mount the network drive so the mac see it and can use for time machine backup.
View 3 Replies View RelatedLinksys Wireless Router :: Can't Update E4200 V2
Jan 3, 2013Trying to update it to the new smart Wifi but getting this error "Incorrect Image File".Yes Ive tried redownloading yes ive tried different browers and yes to unziping the file! and Yes Im downloading the correct version I even tried version 1 for the heck of it and still nothing.
View 3 Replies View RelatedLinksys Wireless Router :: E4200 V1 Tops Off At 144+450 Not 300+450
Dec 21, 2011I just received by replacement e4200 v1. I updated the firmware to 1.0.03 build 14 and am up and running just fine. The specs say e4200 should be 300+450Mbps. I am using a software "inSSider 2.0" to view my wireless setup. I get 144(N) at 2.4GHz and 450(N) at 5.2GHz. Please note these are max bit rates and not connect speed or throughput rate. The "inSSider" software gives me the following:
2.4GHz - 1/2/5.5/6/7/9/11/12/14/18/22/124/28/29/36/43/44/48/54/58/65/72/86/116/130/144
5.2GHz - 6/9/12/15/18/24/30/36/45/48/54/60/90/120/135/150/180/240/270/300/360/405/450
I get this information by hovering on the max bit rate field on the row displaying my SSID. So is it correct to say that my e4200 is not designed to reach 300Mbps at 2.4GHz. There is an earlier discussion thread about connection maxing out 144. Please note I am not talking about connect speed or thru-put speed. Max design bit rates of dual band router labeled e4200.
Linksys Wireless Router :: E4200 And Powerline Not Getting Along?
Jul 10, 2011Just got a e4200. However I also have a cisco av power line adapter which worked fine. However when connecting to the 4200 it doesn't recognize the Internet. Have rebooted, reset switched ports etc. But it still doesn't work. It sees the network but not the Internet. Have tried everything ikon but no luck. Cannot connect my directive to the Internet. If I can't get it to work will have to run a 50 foot cable.
View 5 Replies View RelatedLinksys Wireless Router :: Turn Off ULA On E4200 1.0.03?
Oct 8, 2011Firmware 1.0.00 on my E4200 Hardware v1.0 provided a functioning 6to4 tunnel through Comcast's 6to4 facility. Windows and Linux clients on my local network discovered IPv6 addresses and were able to use them successfully.Unfortunately, after the upgrade to 1.0.03 this functionality was gone. I missed reading the ChangeLog, which said that the automatic tunneling feature was removed in 1.0.01. The now provided IPv6 functionality works much less well. First, automatic configuration (discovery of the 6to4 via IPv4 anycast) no longer works with Comcast's gateway. If I configure the tunnel manually, by specifying a 2002/16 prefix, I regain IPv6 connectivity, but only for Linux clients on my local network.
Windows 7 clients suffer from the problem that because the E4200 hands out ULA addresses, they end up preferring those ULA addresses when making global IPv6 connections in the IP 'source' field, which of course does not work. It's like putting your company mailbox code as the return address on a letter you send via US Mail. Other home routers, such as the AVM Fritz! (url,...) suffer from the same problem. However, they provide an option to turn off ULA at the router.Is it possible to turn off ULA for the E4200?
Linksys Wireless Router :: E4200 Can't Log-Out Settings 192.168.1.1
Mar 26, 2012I have a E4200 router v.01 and when i updated the latest firmware (due to security exploit) it seems that whenever i acess the router settings (192.168.1.1) it doesn't ask me nor to input the admin and the password anymore, using wifi or wired.. I want the usual proccess whenever i go to 192.168.1.1 it will ask me to input my admin and password to change my router settings..
View 4 Replies View RelatedLinksys Wireless Router :: E4200 Cannot Access FTP
Nov 15, 2012I've been trying to get FTP Running up on my router for some time now.
I know my current WAN address and have setup a specified folder on my E4200 for the FTP partition. A username for myself has been created with login info and I have forwarded the port I have specified on my router's FTP configuration page.
I try to log into the server, but whenever I try to log into it, I keep getting a "incorrect login information" message back at me.
If I cancel out of that then I get an error message saying it can't find the specified folder and to check the address of the server.
I know the login information information is correct and I've tried changing the password to others of varying lengths.
I've also tried changing the port I'm running the FTP off of incase my ISP has blocked that port, nothing works.
Linksys Wireless Router :: E3200 Or E4200 - Which One Is Better
Jul 6, 2011I have a 6 year old wrt54g that is working fine but old. I want to upgrade and will go with the 3200 or 4200. I really don't need the extra features on the 4200 since everything I have is hardwired (directly to two laptops and to two switches in other parts of the house for tv and printer). I want wireless for times when we move a laptop but it wouldn't be all the time, and we won't (for now) use the media options. The difference in price between the 3200 and 4200 is less than $25 so costs is NOT a factor in deciding.So should I just purchase the 4200 since price is not a factor or go with 3200; I want the most stable of the two and will never need the extra wireless features in the 4200.
View 8 Replies View RelatedLinksys Wireless Router :: Only Getting 130 Mbps With E4200?
Dec 28, 2011I bought a Linksy E4200 yesterday and set it up fine, but I only seem to be able to get 130 Mbps on my Wi-Fi. I looked through these threads and tried disabling the 2.4Ghz band and it still remains at 130Mbps. There was no change, also read I can try set up a secondary SSID. I really don't know much about routers or configuring them
View 4 Replies View RelatedLinksys Wireless Router :: USB Support For E4200?
Nov 29, 2011I have a Drobo and am connecting it via the USB port. The Admin Gui is detecting it but only showing 2048.GB capacity its bigger than this is this a limitation? I cannot connect to it via wireless connection/ ie via network. I have also updated firmware to 1.0.03
View 1 Replies View RelatedLinksys Wireless Router :: E4200 Get No Connection At All
Nov 22, 2011My dad recently got a E4200 router, My whole family are mac users, the connection are all okay with their computers, I'm the only one using Microsoft, ASUS running on Vista. The connection is fine when I'm near the router, but when I go to my room I get no connection at all, it connects for a second but then it goes on connection with limited access.
View 5 Replies View RelatedLinksys Wireless Router :: E4200 / Can't Ping WAN IP
Feb 2, 2012I'm using Linksys E4200 router. I can't seem to ping the static WAN IP (from internally or externally). All other connectivity seems to be fine. I can ping the routers internal IP, as well as the cable modem and other external IPs. But all port forwarding through the E4200 is failing.Should the default security/firewall setting allow port forwarding? Or do some settings need to change?
View 2 Replies View RelatedLinksys Wireless Router :: How To Reconfigure E4200
Oct 28, 2012I have been set out to pasture by the Linksys support staff as I have passed my 90 free tech asstistance period. I had a power outage and now I have a solid Cisco light on the top of the router but I can not get any port light activity on the router. I don't see how I can reconfigure it if the system can not even access it?
View 9 Replies View RelatedLinksys Wireless Router :: E4200 V2 Set Up At New Location?
Apr 12, 2012I will be staying at a rental property that has ethernet cable & modem. If I bring my E4200 v2 router from home & connect it to their modem, will my Toshiba 16GB Thrive be able to access the internet via WiFi? When I initially set up the router, I ran the router CD on my laptop, and the Thrive automatically accessed the internet. Will the Thrive automatically do the same when I connect the router at the new location. There is no computer there to run the router software. Will the the network be secured as it is at home? Same network name & password?
View 1 Replies View Related