Linksys Wireless Router :: E4200 Can't Get Over Ca 10MB/s Data Throughput

Dec 27, 2011

I'm using E4200 (fw 1.0.03) as AP and EDIMAX 6675nD as a client. I can't get over ca 10MB/s data througput even there aren't any other communication loads. Test conditions are: 5GHz band, no other networks in the band, distance 2m without any obstacles, no other data transfers (except the test), data source is NTB on GLAN port of Linksys, data sink is NAS at GLAN port of Edimax, test file is 0.5GB file. The NTB and NAS doesn't seems to be a bottleneck, because NTB connected directly to the Edimax does over 50MB/s. Both the E4200 and 6675nD are (should be) capable of 450Mbit/s @ MCS23. Strange thing is that none of them allows setting of MCS23 in their manual settings. It ends with MCS15. While forcing the E4200 to a specific MCS (in the hidden wireless_advanced menu)  the MCS15, 14, 13 and auto give very similar results. The throughput drops by MCS 12 and lower indexed MCSs.The 10 MB/s seems to be a low number.... and (based on internet forums) I'm not the only one fighting the magic number 10MB/s. What is the reason of the ca 10MB/s bottleneck? And the resons why both of the routers are quiet about the MCS16 to 23 schemes in their menus, while their labels aren't?

View 4 Replies


ADVERTISEMENT

Linksys Wireless Router :: E4200 Wan To LAN Low Throughput

Jun 22, 2012

I have a E4200 V1 with 1G internet connection, when i connect my PC, with a cat6 cable, directly to the modem the download speed can upto 800Mbs, but when i connect through E4200 to the modem it down to 100Mbs.

View 1 Replies View Related

Linksys Wireless Router :: E4200 With Proper Throughput?

Feb 12, 2012

I have an E4200 running firmware v1.0.03.Works fine for a period of time (might be hours, might be days) then throughput drops to something in the range of 1-3M when typically I'll see 6-8M (DSL).  I can reset the DSL modem, hubs, etc but the problem isn't fixed until I reset the E4200; so I've pretty much narrowed it down to the router.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Unusable For Data Backup?

Jan 10, 2012

 I have a 1.5 TB USB hard drive attached to me E4200.  Configuring it so that multiple computers have access and can read and write their files is quite simple.  I've followed the instructions and had no difficulty.
 
My problem is this, after about a week's time has passed any file that has been on the hard drive for more than a week become undeletable.  Any attempt to modify it or remove it pops up a message saying I need permission from a specific user (always the user that I am currently logged in as!) to perform the operation on the file.
 
When this starts to happen, the device is, otherwise, perfectly functional.  I will still be able to create new files and delete any newly created files from the drive without difficulty even when those files are in the same directory as the files that the device will no longer let me edit.  Examination of the file properties dialog shows that the files that the device refuses to allow me to delete are identical in every way to any new file that I create.  Yet newly created files are removable but these older files ... are not.
 
I'm quickly coming to the conclusion that the HDD mounting feature of the device just doesn't actually work as advertised.
 
FWIW:  all my computers are using Windows 7 with the latest build.  I do access the device from these computers wirelessly.

View 9 Replies View Related

Linksys Wireless Router :: E4200 Lost Data On Usb Drive?

Mar 26, 2012

I have E4200 v1 with 1.0.3 firmware and an old 2.5"/120GB hard drive. Today I discovered that all my data where lost. They were there not longer than a couple of days ago. I'm almost sure it's not my fault and the drive is healty. I'm  now moving back datas onto it and I will check for them daily.
 
1) I had no power loss;

2) I didn't reboot nor I didn't switch it off/on;

3) I didn't copied files since days;

4) The last time I used it I just browsed files;

5) It's not exposed to the internet but just to local network;

6) The router hasn't logged admin logon other than from my computers.

View 7 Replies View Related

Linksys Wireless Router :: E4200 Wireless Client Drop On Transferring Data

Dec 14, 2011

I have had an e4200 for about a month now and its been pretty good.  But I have noticed that it completely locks up when I go to copy mass amounts of data through it.    I have a NAS drive plugged into it and my laptop is on the 2.4 spectrum.  I went to transfer 8gigs of data from laptop to NAS drive and the entire wireless portion of the router locks up.  All my wireless clients drop and I have to unplug the router and plug it back in.    Even the 5ghz clients drop as well.  I have not tried hardwire, but the main reason I got this was for its throughput.

View 1 Replies View Related

Cisco Routers :: RVS4000 - How To Achieve Maximum Data Throughput

Oct 15, 2012

what the maximum Data Througput can be for this router. Right now, the router is limiting my internet speed compared to what the cable modem can provide..So far, I know that when I connect my computer directly to the output of the Motorola Cable Modem and run a Speed Test on my Charter cable connection, the test shows ~ 50 Mbps for downloads and ~5 Mbps for uploads. That would be great, but I have multiple computers and need to use a router/gateway to feed my LAN. When I insert the RVS4000 router between modem and computer, the Speed Test results drop to ~ 16 Mbps for downloads and remain ~ 5 Mbps for uploads. During that test, there were no other computers online via the router. While 16 Mbps is not shabby, I would like to achieve the full value... is that possible?

Is the RVS4000 unit capable of 50 Mbps for 30 Mbps? How do I setup the router to achieve the maximum available download speed?There is a setup page for the router which has settings right now set at 50000 Kbps Upload and 60000 Kbps for Download; this implies to me that the router is capable of such speeds.

View 1 Replies View Related

Linksys Wireless Router :: Very Low WAN Throughput On WRT160NL

Jun 11, 2012

I recently bought a WRT160NL router. I have a 10/10 Mbps internet connection, but when I am connected via the router it only gives me ~2.5/1 Mbps speeds. Connecting my computer directly to the "wall" results in 10/10 Mbps speeds. I have tried connecting to the router both wireless and by wire, it makes no difference. The internal wired and wireless speeds are fine, as I have copied files over the internal switch and via the wireless network at relatively high speeds. I have not fiddled with any connection settings except creating a few permanent DHCP leases.

View 6 Replies View Related

Linksys Wireless Router :: Low Throughput With E2500

Feb 1, 2012

I have a E2500 connected via LAN to my network via a switch or hub through a sonic wall and into the modem out to the internet. The problem is that I am only getting +/- 5Mpbs Down and +/-7 Mbps up through the router.
 
If I connect my computer to the network with out going through the router my speeds are more in the range of +/-28 Mbps down and 16Mbps up. I have been working with Linksys support but they have not been able to assist me with this yet! Is there any configuring I should be doing at the firewall or to the router to tell it to open up the port for faster speeds?

View 1 Replies View Related

Linksys Wireless Router :: E3000 Max Throughput For Internet And Usb Nas

Dec 25, 2010

I have been running some test to see what I can do for speed to the interenet and NAS drive.I have a NIC card (1394) and the max connection I get is 400 Mbps. The card is suppose to be 10/100/1000 card and E3000 is the same... so why can't I connect at 1000?Max transfer I get to my NAS is 64-80 Mbps. Is there any way I can get this to be faster? I have a 1TB western digital drive attached.If I went with a NAS system like a Synology BYOD system could I get faster speeds for transfers if the NIC on the system was a 10/100/1000?`

View 5 Replies View Related

Linksys Wireless Router :: EA3500 Gigabit LAN Throughput Degraded

Aug 13, 2012

I have a 500Mbps Internet Connecton with fibre and I bought an EA3500 recently.  I found the LAN through put degraded by compare connected and not connected with EA3500.all connections are using CAT5e cable with all Gigabit port enabled in PC/ISP Router.

View 9 Replies View Related

Linksys Wireless Router :: E2500 Getting Slow Throughput With FIOS Quantum

Aug 14, 2012

I've just upgraded to FIOS quantum service.  (50 MB down, 25 up).  I have a Linksys 2500 connected to the FIOS router.  The FIOS (ActionTec) router provides the full advertised speeds with any speed test service I try.  But with the 2500 connected to the FIOS router I get download speeds about 3MB. The MTU on the linksys is 1500.  It's connected correctly and is running it's own DHCP server.  (Why am I doing this?  I try to avoid the ActionTec routers, they have broken many services in the past.)The 2500 firmware is up to date.  I've tested on the wireless and wired (ethernet) interfaces.

View 2 Replies View Related

E4200 - Does Dual Band Adapter Increase Throughput

Apr 14, 2013

When you have both a dual band router, and a dual band adapter, does that give you a theoretical peak of 600mbps on the Adapter? or does it only connect on one frequency at a time from the adapter?

EG Dlink DWA-160 with an E4200.

View 1 Replies View Related

Netgear N600 Wireless ADSL2+ Router / Wireless N Compared To Wireless G 10mb/s?

Jan 6, 2013

i have a Netgear N600 Wireless ADSL2+ router on wireless a/b/g/n dual band and all that but what i want to know is will i get better performance if i use a WirelessN card over G on a 10 - 15mb/s connection gaming wise and will it b a great increase over the G causeif its not a HUGE increase then i wont waste my money on a newer card?

View 3 Replies View Related

Linksys Wireless Router :: WRT54GL Which Route Does Data Take

Nov 5, 2012

I've a WRT54GL still working well after 5 years of use. I've got one Ethernet cable attached PC (computer "A"), and two WI-FI attached, (computers "B" and "C"). They're all running Windows XP. I've heard much about how intelligent devices and intelligent systems can route the traffic in the most efficient manner, but not sure how or when it works. For example, if I sit at computer "B": and copy (or move) a file from computer C to computer A, what route does the data take? Does it pass through computer B?

View 1 Replies View Related

Linksys Wired Router :: Cisco BEFSR 41 - WAN To LAN Throughput

May 9, 2011

I have been trying to find out what the maximum Wan to Lan thruput is for the Linksys Cisco BEFSR 41 Etherfast router..
Have both the version 3 and 4 models and want to deploy them into both 6mb and 12mb DSL networks.. From what I have found the version 1 and 2 have 10mb wan ports and the version 3 and 4 have 10/100mb ports.. There seems to be hardware upgrades as well with the CPU and memory speeds but what they are I do not know for sure.. Found someone stating that they went from a 50mhz CPU to a 166mhz CPU to a possible 220mhz CPU...

View 3 Replies View Related

Linksys Wired Router :: BEFSX41 Firewall Throughput?

Jul 12, 2007

What the Firewall throughput is for the BEFSX41.

View 9 Replies View Related

Linksys Wired Router :: Getting RV042 And RV082 Throughput?

Feb 17, 2008

I am currently using Netgear FVS338 Routers / VPN Devices in 3 different locations and honestly I am not happy / impressed with them whatsoever.I have been doing some research and came across the Linksys RV042 and RV082 devices that caught my eye. The question is what is the VPN throughput of these devices?I have gone over the website, spec sheets and they only really say the throughput of the LAN Links and not the WAN Links. I currently have very reliable 20Mb+ Synchronous connections between all 3 sites and have not been able to get any good performance out of the Netgear devices and contacting their support is a joke. They can't tell you anything other than it should work or we will swap out the unit. Well if I have 3 of them that have been purchased at all different times I don't believe that they are all having the same issues. What these units 3DES VPN Throughput and will more than likely be purchasing 3 of which ever once suits our needs immediately.

View 9 Replies View Related

Cisco WAN :: Will 2600 Series Router Support 10Mb 10 / 1000 Traffic From New Modem

Jun 26, 2012

We are upgrading our incoming Internet service from 30 Mb 10/100 to 100Mb 10/1,000.Will my 2600 series router support the 10Mb 10/1,000 traffic from my new modem?Do I need to change my interface speed from 100 to 1,000? I to be sure my router will support the upgrade. [code]

View 8 Replies View Related

Linksys Wireless Router :: E3000 - Shared Drive Data Missing

Sep 26, 2012

I currently have a E3000 router. I have set up a shared USB drive successfully through this router. After a couple of months, I needed to re-locate my router into a different room. After doing so, I plug back in the USB drive and cannot access it. If I go through the GUI, it tells me that the drive type is not supported, and if I just plug it into a computer to obtain the infromation off of it, I get a "drive is corrupted" error

View 5 Replies View Related

Linksys Wireless Router :: E3000 Lost Data On External 2TB WD Essentials

Dec 16, 2012

I had my external drive plugged into the e3000 with the network drive mapped on 2 laptops. One day my connection was slow so I backdoored the router ip (I didn't use cisco connect) to reset the router from my iPhone. I'm not sure exactly what was changed, but the partition disappeared from the drive. I've used a couple file recovery programs to try and retrieve the 250+ Gb data that was on the drive with no luck. They only find "deleted" files. Not the 13k files that were there and not deleted. The drive was never bootable. What to be used to recover the files.

View 1 Replies View Related

Linksys Wireless Router :: EA3500 - Any Utilities To Get To Data In Unallocated Partition

Sep 30, 2012

I've lost about a TB worth of data. I'm rebuilding a computer and had my hard drive, a Western Digital Caviar Black WD1001FALS 1TB, in an external enclosure so that I could access files from it until I could move them to a new drive. I just happened to hook the drive up to the USB port on my new Linksys EA3500 router and now I can't see anything. I believe the process of plugging the drive in, allowed the router to mess with the partition table of my drive. Before, when things worked I saw three logical drives. one of about 50-75 MB of reserved space. One of about 80 GB that was my original system drive and one of about 920 GB that was my main data drive. All of these were NTFS. Now when I look at the drive, all I see is one drive FAT32 drive of about 71 MB.If I look at the drive under Computer Management, Storage, Disk Management, I see the drive is made up of a 71 MB FAT 32 Primary Partition and a 932 GB Unallocated partition.Am I totally screwed? Is my data still there and is there any way for me to access it or any utilities I can use to get to my data in this unallocated partition? What the heck did this thing do to my drive without permission?

View 5 Replies View Related

Linksys Wireless Router :: E2500 Stops Receiving Data For Any Large Download

May 3, 2011

My setup is as follows:
 
Linksys E2500 as DHCP client, all default network settings (MTU auto configured to 1500), connected to:
ZTE 831 II ADSL2+ modem in bridged mode
 
The issue is that whenever any large file is downloaded over HTTP, the download stops after about 4 minutes and never resumes. This results in:
 
1) HTTP downloads of anything > ~80 MB failing; tried using several browsers and CURL, all with the same results

2) iOS downloads in iTunes timing out

3) YouTube videos stalling every few minutes
 
Interestingly, Netflix streaming works OK. Perhaps that's because the protocol for Netflix is not a single large download but a bunch of smaller ones, but that's conjecture.
 
This all occurs over both wireless and wired connections to the E2500.
 
If I connect my Mac directly to the ZTE modem, I don't have the problem.

View 8 Replies View Related

Linksys Wireless Router :: WRT160NL Changing File Sizes On Data Storage

Feb 27, 2012

I have WRT160NL with Firmware Version: 1.0.02. After 3 days of trying to connect my WD Elements 3TB I succeeded with 2 partitions of 1TB and one of 700 Gb not visible from router. I'm ok with that. The problem now is when I copy my files. I'm trying to create TV Series library for my Apple TV. Everything is working fine except the size of the files. When I'm copying files from PC USB they are corrupted on the network storage and not accessible. When I'm copying one file of size 350 Mb on the Network Storage via WIFI working fine but is saved with size of 2,7 Gb.

View 6 Replies View Related

Linksys Wireless Router :: E3000 Data Rate Slows Down After A Period Of Time

Aug 11, 2010

I have just bought an E3000 router when my old router died last week.  I am having two problems:
 
1.  The data rate slows down after a period of time (long message trail elsewhere)

2.  I cannot see everything on the network.
 
I have several Win 7 computers, two win xp computers,  three NAS devices (linux based), and a printer sitting on the network, along with two switches to cope with all the traffic (not to mention iPods, iphones etc.)With my old router, I couold see everything plugged into the network from my main Win 7 computer. (note:  the win 7 network map does not always work, but the windows explorer window of the network always showed everything).With the E3000 router, I can only see 1 or 2 of the devices on the network.  If I reboot the router, then sometimes all of the devices appear on the windows explorer window (sometimes not)I am running a workgroup (not a domain) and i am not using win 7's homegroup because that will not work with the non-win 7 devices.Is there a setting that will see all of the devices in Win 7 (either on the router or on the computers). I suspect it is a router issue as it worked with my old Zyxel router.

View 9 Replies View Related

Linksys Wireless Router :: EA3500 Phones Connect To Wi-Fi But Cannot Sens / Receive Data

Feb 3, 2013

My phone and my friends phones can connect to the wifi but I cannot receive nor send data from it.  The phones work completely fine elsewhere.  Here is the kicker, my computer works completely OK on the router and my phone used to work for 3-4 hours before this issue started going again.  Now it is constantly.  I restarted the modem, default reset it and still nothing.  I get an IP address too and it stays connected.  Cisco thinks its the phone, but its multiple phones that are having the problem and my phone and other works completely fine at other places.

View 7 Replies View Related

Linksys Wireless Router :: Can't Log Into E4200

Apr 4, 2012

I have a recurring issue with my e4200v1. My wired and wireless connections work fine, but I can't get to the administration website. I have https only set up, and after I get thru the 'certificate error' screen, I get an error that says web page is unavailable. Firfefox tells me that the connection was lost - error 101.I have tried wired and wireless, multiple computers, multiple browsers.   I even turned the firewall off on one computer (or I think I did anyway).The only way I know how to fix it is by completely resetting then setting up the router all over again.

View 2 Replies View Related

Linksys Wireless Router :: E4200 Wan Not Available

Jul 27, 2011

Upgraded from WRT610N to E4200. Since upgrading to latest firmware the wan just disappears both 5 and 2.5 Ghz bands. Happened with older firmware but not as often. Using it in briged mode. When this happens I can't even get to the management page with a lan connected pc. Have to do a hard reboot to get it to respond again. This is unacceptable for a router at this price point.

View 2 Replies View Related

Linksys Wireless Router :: How To Setup E4200 As WAP Only

Jan 5, 2013

I am connecting the E4200 to a Sonicwall TZ100. I want the TZ100 to assign IP addresses to devices that connect to the LAN via the E4200.
 
How do I have the E4200 act as a WAP only or not assign IP addresses and push that responsibility to the TZ100?
 
I'd still want the E4200 to have a SID key for LAN access security.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Not Getting IP Address?

Dec 21, 2011

I have a 6 month old Cisco e-4200 router that is updated to the latest firmware, connected to a Motorola surfboard modem on Sudden-link in Midland, TX.
 
I previously used this exact same setup on Cox Cable in Wichita, KS with no problems. Upon setting it up down here I cannot get the router to pickup an IP address. I have Power-cycled everything multiple times, did a complete reset and re-installation of the router software and still no luck. The Sudden-link techs have no idea what is wrong. They said that the modems signal is strong and everything should be working.
 
Actually I did get it to work once for a couple of days, however when redoing the surround sound system I had to unhook the cable line and it quit working and I haven't gotten it to work again since. I have tried unhooking everything. Turning it all off. Waiting for 5+minutes, and then reconnecting in order: First the modem, then an ethernet cable to the computer which will usually work. But as soon as I unplug the cable from the computer and plug it into the router it stops working.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Does Not Have Any Provision To Use MAC ID?

May 13, 2013

I bought Linksys E4200, at a time that is the TOP of the line Cisco routers for Home use.I noticed a serious usage issue with it, I could not identify which are the wifi devices connected to choose for access restriction or parental controls, as the dialog box state only as "Network device", and software control by Linksys does not have any provision to use MAC ID or any other option "except " looking at the dialog box as "Network device".

View 4 Replies View Related

Linksys Wireless Router :: Connect E4200 To A Mac Via Afp?

Mar 14, 2011

How to connect the e4200 to a mac via afp? Trying to mount the network drive so the mac see it and can use for time machine backup.  

View 3 Replies View Related

Linksys Wireless Router :: Can't Update E4200 V2

Jan 3, 2013

Trying to update it to the new smart Wifi  but getting this error "Incorrect Image File".Yes Ive tried redownloading yes ive tried different browers and yes to unziping the file! and Yes Im downloading the correct version I even tried version 1 for the heck of it and still nothing. 

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved