Linksys Wireless Router :: EA3500 - Shoutcast Will Not Play When Going Through Router
Sep 6, 2012
I have been trying to connect to an online radio station, a shoutcast. I am unable to do this when connected to my EA3500. I do not think it is a port issue since I can connect to a different station using the same port. I can listen to many other shoutcast streams with no problems.
A friend with an older Linksys router is able to connect to the station with no problems.
I have turned off the ipv4 firewall, ipv6 firewall. I've tried DMZ, port triggering, forwarding. Still the stream will not play. I use the Winamp player, Windows Media player, Real player. All the other shoutcast streams I have tried work, but not the one I need to work.
If I bypass the router it works fine on any of my 4 pc desktops, 4 laptops. My iphone using the winamp app can not get the stream if using the wirless, but can if I turn off wirless and use 3G.
I am writing a radio series for this station and it starts airing the show in a couple of weeks, I really want to be able to hear it without eating up my data on my phone.
View 9 Replies
ADVERTISEMENT
Feb 1, 2013
I just bought a Linksys ea3500 and i'm trying to configure it.This is the case.I have a first router connected to internet and several computers connected to it.Then, I have a second router (ea3500) also connected to it.If i disable the dhcp and use it as an access point i can see all computers in the network.If if enable the DHCP it creates a private network and all pcs connected to this network can't see and access computers of the first network.The problem is that using EA3500 as an access point disables the most part of the features of the router.My question is: can i use it not as an access point (in order to have all features) but at the same time having access the first network and all computers on it?
View 3 Replies
View Related
Jul 23, 2011
I'm experiencing dropping connection and can't play online games because of extreme lag. when pinging certain sites here is the results at the bottom. so very extremely high ping. then after a while like 5 mins, when i hover my mouse cursor at the network icon it says limited access and i don't have any internet connection, even powercycling doesn't work. it stays like that. when using direct connection to the modem only it works fine. but when using the wrt120n router i experience that problem either wired or wireless it stays the same. My firmware is latest, router settings default.
View 5 Replies
View Related
Mar 9, 2012
I have a Linksys E4200v2 couple days ago. After set up everything seem be working fine, accept my iPhone 4s. I can do almost things on my iPhone, but when I tried streaming video or streaming music from apps on the phone it stared buffering.... play..... and.... stop.... almost every 30s which never happen with my old Linksys E1000. And It happen with my wife's phone too. Even my internet speed is not bad at all (Ping: 24 / Download 23Mbs / Upload 4Mbs). So I can guess that problem from the router. Then I swap the E4200v2 with the E1000, everything works fine (it just a litle bit slower when loading at begin).
View 1 Replies
View Related
Dec 11, 2012
I have a E1200 Router and my ISP is Comcast. How to have the best settings to play online. I did the Static IP set up. But I am still having laggy off and on connection. I called Comcast to see what can i do. They said its problems with the router. I enter the right numbers for PS3 in the Single Port Forwarding and Port Range Forwarding. I turn on DMZ and entered the same IP Address as it is on my PS3 I dont have a problem with Resetting the whole Router and starting from scratch ?
View 9 Replies
View Related
Nov 15, 2012
wrt54g will not play videos. I have connected my modem directly to computer and it works fine if I connect thru the router it will not play.
View 2 Replies
View Related
Sep 20, 2012
The E4200v1 does not play nice with the 4s on iOS6!!It will not work at all with Wireless N mode or mixed mode settings. If I have it on these settings, the iPhone will connect (slowly) to the router, but access content on the browser takes forever (or not at all).I have to set the router to G only nmode, but obviously this is no good for the rest of my devices!
View 3 Replies
View Related
Jan 15, 2012
Why I can't play online on xbox live. I'm set on going online but when I go on to play online for MW3(Modern Warfare 3) my NAT Type says strict,I can't join any of my friends games. It says to go on infintyward.com/Nat and when I do it doesn't show my model of linksys (WRT300N) i reset my xbox,my router and still nothing
View 3 Replies
View Related
Mar 12, 2012
I have a Sony Vita , PS3, & Cisco ASA 5505 firewall. I can get remote play to work only if the PS3 is powered on. The ASA will kill any Wake-on LAN packet no matter what I do to try to allow it. Apparently it doesn't support directed broadcast.
View 1 Replies
View Related
Feb 6, 2013
I have recently discovered that I can stream audio from my WRT54G V2 via a wireless extender.I can not play internet radio, or stram Rhapsody via the extender.The extender will not stream audio.This is actually quite normal behavior of a Range Extender. Range Extenders work off of the idea of pulling a signal from the Base Station and then repeating the signal frequently, this generally causes rebuffering issues with most wireless devices within a network.I believe I need a wireless extender that does not repeat the signal, more of a wireless access point.
View 2 Replies
View Related
Feb 15, 2013
setup an external hard drive with music on on the usb port on my EA3500 and actvated ftp but I cant access it from the net.
View 1 Replies
View Related
Sep 7, 2012
For hours i tried to find info online of how to access QoS on EA3500 router. I cannot find it on the cisco connect cloud page.
View 1 Replies
View Related
Jul 18, 2012
System:
HP Pavilion dv7-6135dx Ent Pc Win7 Home Prem 64
Motorola Surfboard Modem
Linksys EA3500 Router
Netgear 10/100 24 port switch
my wife bought me this EA3500 for Father's Day this year. It's only been hooked up for a couple of weeks (we were in the middle of a move during Father's Day), but now I have no wifi on either band. My wife can no longer connect to it either. We have tried completely resetting it, we have reset the modem, the switch, laptops, everything. Still no wifi. It worked out of the box, but now we have nothing. Does HP needs a certain type of driver? Our iPhones show connected and surf the brower's and FB app with no issues while in wifi mode, but then again, I can pull the ethernet from the internet port and the phone's still show connected (good job, iOS).Cable from main splitter runs to basement where the modem is located. Modem ethernet feed up a wall to a wall plate where the router is. Router then feeds back to the switch. The switch then sends the IP throughout the house for the LAN lines, and the EA3500 feeds all of the wireless devices (used to). So, Cable box, modem, router, switch. Router is currently good for LAN only. I am connected to it via LAN right now, 2 feet from my laptop.
In connections:IPv4/IPv6 both "No Internet Access" (for IPv4, if you change a setting in the setup, it becomes "Internet Access" for about 3 seconds.)Media State: EnabledSpeed: Alternates between 72Mbps and 144Mbps
View 5 Replies
View Related
Feb 25, 2013
In my home network, I have a Synology. It has 10.0.123.123 as local IP address on my local network and it can be accessed by internet with the dynamic domain name.So when I'm home, I have to use 10.0.123.123 to access it, and when I'm away, I have to use trucmuche.diskstation.me.Would it be possible to configure the EA3500 to redirect the domain name "trucmuche.diskstation.me" to 10.0.123.123 when I use the domain name inside my home ?A friend told me that I had to configure "loopback" but I don't know how..
View 3 Replies
View Related
Sep 7, 2012
The guest network on the router keeps going down. It can be seen but it cannot be connected to. Sometimes it works for a day or 2 and then it doesn't. I have to constantly babysit the network and it is entirely frustrating because the only fix is to reboot the router.I have tried factory resetting several times.I have tried re-flashing the fw.I'm using the non-CCC fw because CCC had way, way too many issues.These routers have been out for months and many people have been having issues and somehow Cisco doesn't see fit to work on firmware that stabilizes them at all? It's like, they release a router and then forget about it - the next batch comes along, often the same guts with a different shell and it's the same thing over again. I had a WRT610N and I said I'd never buy another Cisco after that but I broke my rule because of being lured by these "App enabled" features, which mind you have nothing at all over the competition since the CCC doesn't even work for most people.
View 9 Replies
View Related
Jan 22, 2013
I have a EA3500 wireless router with the new style (smartwifi) firmware. I've scoured the web admin interface and can't find any sort of 'status' page that would tell me the external IP. I've looked through the support docs but they only show how to find internal/local IP.
View 2 Replies
View Related
May 19, 2012
I have an EA3500. PPPoE connection. Can't seem to choose my DNS server (use Unblock-US) since the router insistently forces me to use the DNS from ISP.How can i work this around? I'm kinda tired of people asking me why i am changing the DNS. I want to change the DNS and that's final. It's a resource like any other and i want to use it.P.S: i tried most of the basic troubleshooting. I tried my old router back on and the DNS's works fine. I tried even conecting the old router re-routing the new one, and the other router manages the selected DNS's servers fine.
View 9 Replies
View Related
Jun 28, 2012
If someone has the original firmware for the EA3500 to copy. I need to downgrade my router after Cisco sabotaged it with their Cloud Connect. This will be the firmware you have right out of the box. Be sure you go into the Admin. section and Save a Copy before you ever connect to the Internet. Also Uncheck the Auto Updates box or you will be fed the Cloud Connect (and its amazing Terms Of Service).
View 6 Replies
View Related
Aug 7, 2012
Windows 7 64 bit / Linksys EA3500 / (2) FosCam F18910W IP Camera’s I just installed a new EA3500. (Should I have purchased the 4500)?I need to set up port forwarding to enable wireless use of the IP cams with my iPhone. I had this all set using my former router, but it died.how to to port forward this Linksys EA3500?
View 2 Replies
View Related
Mar 5, 2013
I have recently bought a cisco EA3500 router for my home network and i am pretty surprised to see that a router from the world leader in the networking domain cannot perform as expected.
The first problem i had was that the network (wired and wireless) was dropping from time to time for a couple of minutes with the power led of the router blinking. I turned off the log feature of the router and it seems that until now the problem is resolved.
Now, the second and, at least as annoying as the first, is that i have a 640gb usb hdd connected to the router, formatted NTFS. It seems that every now and then a file gets corrupted, that is, it is transformed into a folder! And it cannot be recovered without pulling out the hdd and using a 3rd parth software for file recovery.
I have the latest firmware. Should i switch back to the classic firmware instead of the "fancy" new one? I really need my files on that drive, so i cannot risk loosing them in this random manner.
View 4 Replies
View Related
Feb 16, 2013
I bought the EA3500 nine months ago mainly for the USB port (for a NAS). I recently replaced Comcast Cable with Verizon FIOS. So I now have the FIOS router as my main router (its' IP address is 192.168.1.1). I put the EA3500 in bridge mode to extend the (wired) network. I could get: After going in to bridge mode (with DHCP), I can not log in to the EA3500 (IP address 192.168.1.5 assigned by the FIOS router). I connect my computer directly to one of the EA3500 numbered ports (after various combinations of rebooting EA3500 and rebooting PC). It just continues to say "waiting" and never logs in. Tried choosing a static route (tried both 192.168.1.43 and 192.168.1.5 with 255.255.255.0, gateway and DNS1 = 192.168.1.1) with no luck.Since I can't log in, I cannot set up my NAS on the USB port of the EA3500 (so I haven't gotten far enough to determine if the USB port will even work in bridge mode).Thought about ensuring the latest firmware but since I can't log in I can't do that. (And after a hard reset EA3500 IP address is 192.168.1.1 which creates conflict with FIOS)
View 9 Replies
View Related
Jun 24, 2012
I am unable to connect a printer using the USB port on my new Linksys EA3500 router.
I followed the directions here: Support Page , but my verison of Cisco Connect does not have the option to "connect a USB printer".
I am on a macbook pro running OSX 10.7.4 and my verison of Cisco Connect is 1.4 (12005.2). My router's firmware version is 1.0.30.126544. A screenshot of what I see after clicking "add a device" in Cisco Connect is below. The printer is an HP DeskJet F4280.
View 9 Replies
View Related
May 4, 2013
after updating to smart wi-fi I can't access the USB FTP or off network.Only way it's accessible is from the computer the router is attached to via network drive.FileZilla gives me this error....."Connection attempt failed with "ECONNREFUSED - Connection refused by server".I've reset the router same problem.
View 9 Replies
View Related
Aug 14, 2012
After using the newest firmware for CCC, I've found it is very convenient, but only in some ways. Now, I think I find it is uncomfortable, very disappointed and waste lot of times. Each time I try to access to CCC, it took me like 5 mins to access the web page. I understand ciscoconnectcloud.com is use when you are outside of your home network, but when I access it directly from my home (local IP), why should I need to connect via a CCC(?) I want a local connect to my router which is a faster access than via a server.
Sometimes, connect via an IP of the router, it say can't connect because of internet connection down, but actually I can still access internet except access my own router. I like the easy setup of CCC but maybe I need to switch back to non-CCC?
View 9 Replies
View Related
Apr 30, 2012
I bought a new router today because my WRT54GL was giving me some fits. I purchased an EA3500 and I'm using an EA2500 adapter on the desktop since the router can't reach it via ethernet. Some of my early troubles with this combo began with not being able to test upload bandwidth. It would just time out and give an error via the built in Cisco (OOKLA) utitliy and through speedtest.net after which, the network would show no internet access and I'd have to reset the adapter. After trying to troubleshoot that issue it grew into zero internet access for my desktop however my Nexus would have wifi access without issue. If I'd startup in safe mode with networking I'd have net access shortly and then it would quit about 30 seconds after startup. I've tried uninstalling all drivers for the wireless NIC and the Cisco Connect software while doing everything manually but nothing changes. This PC simply won't gain internet access with the EA3500 or even allow me to access the router through the default gateway IP. I've since put the WRT45GL back in place and I have access again with my EA2500 adapter. I should note that with the EA3500 in place, if I disconnected from my wireless I couldnt see any networks until I unplugged the adapter and reinserted it into the USB port (i've also tried many different ports). I've named the SSID's of the two routers differently, tried a manual setup of the wifi, tried the CD setup, the wifi protected setup, no security, and WPA2 to no avail. I can't seem to get the EA2500 adapter and the EA3500 router to get along. I'm running W7 x64 Pro.
View 6 Replies
View Related
Dec 7, 2012
I've recently purchases a Canon MF3010 Multifunction printer, and connected this to my EA3500 router's USB port. Used Cisco Connect to setup the printer, and the print function is working fine.
The issue is with the scan function. It appears the default functionality of the router is to only activate the connection to the printer when a print job is fired off. When this connection is active, the scan functionality works fine.
Another way to activate the connection to the printer to allow for scanning would be to go through
Cisco Connect>Computers and devices>PrinterWhile the process is running (searching for printer), the connection is active as well, and scanning works fine. When the process is closed, scanning no longer works, with an error message stating that communication to the printer cannot be established.
Is there a simpler way to keep the connection to the printer active, or some sort of configuration to automatically establish this connection for scanning?
View 1 Replies
View Related
Mar 19, 2013
I have an HP Veer Webos phone. Since I upgraded to an EA3500, I haven't been able to connect my phone to the network wirelessly. Today I temporarily installed a WAP54g on the network, and I am able to connect the Veer via the WAP. I spent 45 minutes chatting with Cisco Support today, but didn't resolve the problem. I believe I have the same situation with an HP Touchpad, but can't say the problems are identical, since its battery is down right now.
[code]....
View 7 Replies
View Related
Nov 21, 2012
Its not even listed as a download on the official page of the router. How can i see the notes?
View 9 Replies
View Related
Mar 13, 2013
I need to set parental controls on a device EA3500. Problem is that the device is listed under the same icon as a device I don't want restricted. If I click on the icon it lists one MAC as wireless 1 and the other as wireless 2 but still as one device name. One is an Xbox (the one I want restricted) and the other is a PC on Windows 7. I can only set up parental controls by icons/device names, not MACs and MAC filtering is a pain as I have to add and remove it everyday at a certain time.
View 3 Replies
View Related
Jan 25, 2013
I bought a EA 3500 router and my speed is going only half the speed it was without the router.I have charter 100 meg internet, and a alienware Pc with a gigabit card.I wa going 100 megs and now I am at 38-50.I have tried hard reset with the bottom button, I have turned off all firewalls, I have changed my MTU to 1400 and 1500, I have went to speedguide.net and ran a optimizer., I have tried just about everything I can think of. firmware is up to date.
Is there anything I am missing, or am I not going to get these speeds with this router, I was told when I bought it, it was what I needed, Was I duped?, or is there just some setting i need to fix i am not aware of?
View 1 Replies
View Related
Mar 30, 2013
Just installed a Linksys N750 (EA3500) router (WAN - LAN setup). I settled both band networks : 2.4 Ghz and 5Ghz with different SSID and different WAP2/WAP personal mixt. WHile some devices will show both networks correctly, I'm facing issues with the 5Ghz band and wonder if this is sigh of some kind of failure:
- while my iPad offered both signals and let me set the 5 Ghz band, it is showing weak signal and stall on loading webpages; as soon as I instead put it on the 2.4Ghz band, (standing at same location of course), everything runs smoothly, excellent signal.
- I have a Mac Mini and PS3 side by side same location. The Mac Mini seems to works flawlessly under both bands, 2.4 or 5 - excellent signal. However, the PS3 fails its connexion test and states that signal is not perceptible on the 5Ghz. But connect as a snap on the 2.4 Ghz band.
- Got on and off 5Ghz signal on a laptop; connected to 2.4Ghz, everything runs perfect.
- iPhones 4S : I don't even see the 5Ghz SSID, but I get both the 2.4 and Guess account..So I'm tempted to conclude that some devices just can't follow the pace (??) to connect on 5Ghz..
View 4 Replies
View Related
Feb 5, 2013
I currently have an old Linksys WRT160n.How does upgrading to the EA3500 benefit me? How does this differ than my current router which is still wireless N? I know it is Dual band but does that really matter?If my ISP provides me with 10 Mbps does it really matter what router I go with? How exactly does it speed up gaming/netflix/etc?
View 9 Replies
View Related
Sep 20, 2012
I have an EA3500 that I installed recently to replace an old NetGear Router, everything works fine like a charm and suddenly is like the router goes down, both wired and wireless connections go down, no connection at all to the router, no internet, no nothing, the power stays on, but you can see the Leeds on the back blinking like when you do a reboot, then after a couple minutes everything comes back again, till the next drop...it happens several times a day, sometimes 3 to five times in an hour, some other times just happen 2 or 3 times a day... I have tried everything possible, changing the settings, factory defaults, firmware upgrade and roll back, MTU, different channels, even different power outlets to no avail.I wonder is I have a lemon, the worse part is I can't return to the store since the UPC code is gone (rebate) and links says they can't take it back as RMA.
View 3 Replies
View Related
