Linksys Wireless Router :: Replacing WRT150N With E2500?
Sep 1, 2012I want to replace a WRT150N with an E2500 and retain the setup/settings of the WRT150N.
View 2 Replies
ADVERTISEMENT
Linksys Wireless Router :: E2500 - Replacing Netgear With No Success
Jan 21, 2012I purchased an E2500 wireless router. I am trying to replace a Netgear wilreless router with no success. During installation my laptop reaches about 25% and I get an error message. In short my laptop asks for an IP address with a password. Once I enter that information I receive an error message to call for assistance.
View 1 Replies View RelatedLinksys Wireless Router :: WRT150N - Where To Find WPA Key
Nov 26, 2007I'm trying to setup Xbox live for my Xbox 360. I have the WRT150N wireless router and just got the wireless adapter that plugs into the 360. It said the adapter couldnt pick up the signal then i realized i needed to enter the WPA key from my wireless router. I checked the information on the router and it only gives me the serial number and MAC address. How I can find out what the WPA key is for the router??
View 5 Replies View RelatedLinksys Wireless Router :: Cannot Connect To Wrt150N
Aug 8, 2012I have a wrt150N that I am trying to determine whether it's dead or not. I cannot connect to it directly, even if I plug my laptop directly into the Router. Pressing the Reset button does nothing, the lights don't even flash?If I change my Ethernet cable it does represent which port I'm using but I can't ping 192.168.1.1 either? I want to try and flash the bios but A: there's no file to download for this model and B: I presume I need to be able to connect in order to do the flash?
View 4 Replies View RelatedConnecting Wirelessly To Linksys WRT150n Wireless Router?
May 13, 2011I am currently at a friends house attempting to fix a situation he is having with his' wireless router, it is a Linksys WRT150n.Connection to the internet is possible via ethernet connectivity, however wireless is another story, devices can see the network but cannot connect to it, i have disabled the security key from the network to see if it was a simple password incorrection but still no dice.The current basic wireless settings have network mode set to mixed, and radio band, wide and standard channels set to auto, all other settings in the advanced tab are set to their default values.
View 1 Replies View RelatedLinksys Wireless Router :: Wrt150n - How To Remove A Device
Jan 23, 2008I have the wireless-n wrt150n router. I have it wired to my computer and have it wirelessly connected to my ps3. But for some reason there is another unnamed device listed under My Network. My network was not secure before, but I changed it to secure when I noticed the unnamed device. How do I remove that unnamed device from my network?
View 3 Replies View RelatedLinksys Wireless Router :: Laptop Keeps Disconnecting From WRT150N?
Nov 24, 2007Laptop keeps disconnecting from WRT150N
View 9 Replies View RelatedLinksys Wireless Router :: WRT150N Suddenly Not Working
Sep 7, 2012Up until about midnight tonight, my router, which has been plugged in to my cable modem, has been working fine for years, both wired and wirelessly. Suddenly, however, I went to log on to my desktop PC (wired connection; Windows 7), and I had no network connection. ipconfig indicated "media disconnected." My cable-based phone service (VOIP) is still working fine at this time.
First attempt - unplug router, wait 15 seconds, plug it back in. Still no good, though my network sharing center indicated that the network connection was appearing/disappearing every few seconds, never actually getting "internet" connectivity.
Second attempt - attempted to use a WIFI-based device (iPad), which could not see my home network by name at all.
Third attempt - reset both the cable modem and the router, bringing the cable modem up FIRST. Same results as the first attempt.
Fourth attempt - plug the wired PC directly into the cable modem - this worked fine and is how I am submitting this post as I type. So the cable modem is working properly.
Fifth attempt - look up the information on how to reset the router to factory defaults. Used a paperclip to depress the reset button for 10- and on a subsequent attempt, 30-seconds (no obvious "reset" blink pattern was observed). Plug PC back in to router. PC would not obtain any DHCP-based IP address and the network sharing center was still behaving as in the first attempt.
Sixth attempt - disconnect the cable modem uplink and see if I could get the local network functioning. Now I noticed that the LED patterns on the router were behaving as:
- Power and my PC's slot number lit
- All lights lit
- All lights off
- Power and my PC's slot number lit
- etc
Linksys Wireless Router :: Wrt300n Linked To Wrt150n?
Aug 6, 2011In my home I have a cable modem wired to a links wireless router a wrt 300n in my office (only hardwired used in there) and I do not get such good distance to my back bedrooms with my laptop. I have run a Ethernet cable dead center of the house for my sat receiver that is connected and wired to the 300wrt. Here is my question can I use the 150 like a hub or switch at the office connected to the cable modem and use the wrt300n router so that I get wireless on that side of the house. Or in reading here I see I can maybe use a bridge. I do have a older Linksys wrt150n sitting in a box.I have read until my eyes are almost bleeding and am not sure. How I can get a better signal on the other side of the house.
View 4 Replies View RelatedLinksys Wireless Router :: Change NAT Type To Open For WRT150N?
Jan 6, 2012Changing the NAT Type to open because I can't play with some of my friends on Playstation.
View 1 Replies View RelatedLinksys Wireless Router :: (PS3) Changing NAT Type To Open For WRT150N
Dec 31, 2011chaning the NAT Type to open because I can't play with some of my friends on Playstation.
View 2 Replies View RelatedLinksys Wireless Router :: WRT150N - Unable To Print From Mac Devices
Nov 9, 2012I can get regarding using the Collobos Fingerprint software through my WRT150N router. I'm using Windows XP SP3 and immediatly after installing (which went extreamy well) it immediatly found and listed all of my home network printers. All of the wired and wireless windows based systems in my house can see and print to the printers without any problem. However, getting ANY of my apple devices (iPad, iPhone etc ) to print will not even show them as listed on the device when I select print on the devices. Collobos says that I have to make sure that Ports UDP 5353 doe Bonjour and TCP 6361 for FingerPrint need to be open both ways for it to work, I have no problem getting into the router settings and have set them up as stated above in Port Range Triggering and enabled. Also made sure Filter Multicast was not check marked in Security. Unfortunatly, that doesn't seem to work as I had hoped.
View 3 Replies View RelatedLinksys Wireless Router :: Can't Login To Wrt150N After Hard Reset
Aug 21, 2011I have a router that I upgraded the firmware a while ago, I stopped using it several months ago, I was going to give this router to my sister, i tried a hard reset(30 seconds press reset, unplug, hold hold the reset, wait 20 sec, plug power, hold for 30 sec and release the reset) and I tried to login with admin admin and it doesn't accept it. I tried with another router dlink 614i and the same problem, after resetting it it's not accepting admin admin log/pass.
View 1 Replies View RelatedLinksys Wireless Router :: WRT150N Access Restrictions Not Working
Apr 3, 2011I am using a WRT150N with firmware v1.00.5. I have a Linux setup with Squid connected to the network with the gateway 192.168.23.254. The WRT150N has a gateway of 192.168.23.1. The WRT150N is also connected to an Apple Base Station which serves as the Access Point for WiFi users.Squid limits access for IP addresses listed under the .254 gateway. But once I change my gateway to 23.1, everything is accessible. I want to block sites as well on the WRT150N. But every time I try to put a new Access Restriction, it doesn't work.
View 4 Replies View RelatedLinksys Wireless Router :: WRT150N Internet Port Dead?
Jul 28, 2012It has happen suddenly : Internet is not working through WRT150N, though it work when directly connected to the modem. So I think it is a router issue :On the WRT150N, Internet light is flashing fast for 2 seconds, then is off for 2 seconds, then flashes, then is off and so on, wether there is a device (computer, modem, ...) plugged or not, through the blue ethernet connector.And sometimes, Internet light stays off from power on, whatever is done with ethernet connexions (yellow or blue).
When connected to the blue ethernet Internet connector, my pc ethernet lights don't blink (nor the link light or the data light)I have try the 30-30-30 reset cycle. But it doesn't improve.I have tried the loopback test : connect an ethernet cable from the one of yellow ethernet port of WRT150N to the blue ethernet of WRT150 N.Sometimes, the light for the yellow ethernet port goes on for a few seconds, while the Internet light continues to flash. After a few seconds, both go off.Sometimes, as soon as the loopback is made, the 2 lights go off, and if a computer is plugged to the yellow port, the ethernet lights of the computer and the router stays off.But I can access to WRT150N through Wifi and I can access to the web management.
Linksys Wireless Router :: WRT150N Many Links Within A Website Will Not Open
Oct 31, 2012Several "consultants" have told me that the problem probably lies within my Linksys WRT150N.However, upon pinging the router, it responds. I did not reset the router to factory default), I just pinged it, and it's there.My firmware is v1.0.04. My provider is Cox Communication, and the connection os cable modem.Curiously, my wife's I-Pad will not open these links either.Sample link that doesn't work: url... Upon website opening click on "weekly ad".
View 2 Replies View RelatedLinksys Wireless Router :: WRT150N All Lights On Front Are Blinking
Feb 9, 2008I had successfully set up my new WRT150N router and it was working. But then it just stopped after about 12 hours. All the lights on the front of the router are blinking. When I directly connect to the router, my computer can't detect it. I've browsed through these forums a bit and tried a few things - the reset button (60 seconds), unplugging the router, downloading the EasyLink Connect tool, but I'm still stuck.
View 5 Replies View RelatedLinksys Wireless Router :: WRT150N Successfully Up / Now Stopped Being Detected
Jul 10, 2011I've been using a WRT150N wireless router successfully up until a couple days ago, when it stopped being detected. I can plug my computer directly to my modem, and it works, so my internet connection is fine. I have an older BEFW11S4 router that I am using currently, but it is very slow compared the the N router. I've tried resetting the 150N router, and also the modem, and combinations of both, but nothing seems to work. I plugged the router into my computer without connecting the modem, but I'm not able to access 192.168.1.1 either. All the lights illuminate when the router is plugged in.
View 9 Replies View RelatedLinksys Wireless Router :: WRT150N Unit Disconnecting From Wired Connections
Jan 21, 2008I purchased a WRT150N in early Dec 07. I had a number of problems with the unit disconnecting from wired and wireless connections erratically anywhere from 1/2 hr to 10 hrs. of operation. Troubleshoot thru Linksys chat. Ended up replacing router. Now I am having the same problem with replacement router. I've updated my windows XP, SP2, updated Ethernet driver and manually reconfigured router per Linksys advise. Wife and my laptops have N adapters, primary PC is wired in. It seems to disconnect all connections at same time, totally random. The only way to reconnect is to power down router for a few seconds and then power up.
View 9 Replies View RelatedLinksys Wireless Router :: WRT150N Disconnecting - Need To Remove Power To Reconnect
May 23, 2009My Linksys WRT150N recently gave up on me and started to give me weird issues and started to disconnect (all the ports including wired & wireless) anywhere from 3 to infinite number of times per day and my only solution was to remove the power chord and connect it. I tried all possible ways possible including resetting the router, stopping SSID broadcast, removing the encryption, etc, but non worked. As the router was out of warranty my only option was to take it to the dealers where they told me it would take 3 weeks to fix and God knows how much they would have charged me. But after flashing the firmware with the dd-wrt it has been almost 24 hours without a single problem and now I have the cool option of seeing who is connected to the router, etc. This is a MUST for every Linksys owner.
1. Reset the router using 30-30-30 and waited for 2 minutes for things to come back 2 normal
2. Flashed the router with "dd-wrt.v24_mini_generic.bin"
3. Reset again using 30-30-30 and wait again4. Flashed the router with " dd-wrt.v24_std_generic.bin"5.
Linksys Wireless Router :: Wrt150n - Wifi Network Lost Its Name / How To Reset
Jun 30, 2011We have the Linksys WRT150N router. A while ago it suddenly lost the name we gave it when we set it up and now it shows up as Linksys. Also, it is no longer secure, and sometimes we can't even see our network - it isn't even listed. How do I go in and change this? Will I have to reset the wireless information on my printer, etc?
View 4 Replies View RelatedLinksys Wireless Router :: WRT150N Internet Access Policy Not Working?
Jan 28, 2012I have WRT150N, with firmware version 1.01.9 and I can not get the internet access policy to work.Here are my settings: PC list is configured through IP range as follows:Even if I deny internet access completely, I can still access the internet.
View 2 Replies View RelatedLinksys Wireless Adapters :: WUSB100 Doesn't Connect In N-only Mode To WRT150N Router
Nov 12, 2011with my Linksys WRT150N router in "N-only" mode, the usb adapter WUSB100 doesn't connect. In the datasheet is written that it is B-G, but also N compatible..[URL] It connects only when the router is on "mixed mode" (B-G-N).
The device works great, the only thing is that it doesn't connect to N networks.... cause i think it is not N compatible. When i look for networks, Windows shows me that there is my N network, but when i click connect, after a few seconds, appears "impossible to connect".... but if i set the router on "mixed mode", no problems.
Linksys Wireless Router :: WRT150N V1.1 / Suddenly Wireless Connection Became Extremely Slow
Feb 25, 2013For the last 4 years I’ve been using the Linksys Router, model WRT150N V. 1.1 and never had any problems—until now.Yesterday I noticed that my wireless devices (i.e., two computers, tablet and Internet radio) either don’t work at all (the Internet radio) or the pages load extremely slowly—for example, the tablet has become, for all intents and purposes, unusable. Since my ‘main’ computer is connected directly to my cable internet, I know that there is nothing wrong with the Internet connection itself, only with wireless connection.I disconnected the Linksys Router for 2 minutes and reconnected it, but to no avail. I know that I have not made any changes to any software/hardware that might affect the speed.Since I also happen to have access to another wireless Internet connection (a different provider), I connected to that network and all my wireless devices were working perfectly. Therefore, I think the problem must be with the router. I am using Windows XP (on the main computer, where the router and Internet cable are attached).
View 5 Replies View RelatedLinksys Wireless Router :: WRT150N V3 Dropping Wireless Network Randomly
Jul 4, 2011I have two notebooks, one smartphone, and one blu-ray player that connects to my wireless network. My gaming PC is hard wired into the same router that broadcasts my wireless network. About 5-6 times, my wireless network will drop and everyone connected to it wirelessly will lose their connection for about 1-2 minutes. While my gaming PCs internet connection is undisturbed, all of my wireless devices can no longer "see" the network SSID and therefore connect to it. The problem has been happening consistently for many months.
View 1 Replies View RelatedLinksys Wireless Router :: Replacing BEFSR41 With WRT54G / Can't Connect To 192.168.1.1
Jan 2, 2012I am trying to replaced our wired router (BEFSR41) with a wireless router (WRT54G V5) that we have floating around. When connected through the wireless router, I am unable to access 192.168.1.1. I went to the command prompt and The IP Address and the Default gateway are both blank. I even tried to manually set the default gateway to 192.168.1.1 but I was still unable to connect. Currently, I am connected directly to the modem so that I may use the internet for troubleshooting. I've tried releasing and renewing the ip, but it will not renew.
View 2 Replies View RelatedLinksys Wireless Router :: E4200 Replacing Gigabit FIOS Router?
Feb 3, 2013I have that red gigabit router with the 150/65 service. It connects via ethernet for internet and has a coax to transmit the guide data etc.So my idea was to just leave the Verizon router connected and on (with wi-fi off) so it could do the TV stuff and just plug my router into the ethernet wall port the Verizon guy installed.Not so easy of course, my E4200 will not recognize the ethernet from my ONT (I think that's what the device they put in my basement is called) and the internet doesn't work. I have factory reset the router.The reason I am doing all this is because the wireless range of the e4200 at 2.4ghz is near unmatched and given my house, the actiontech cannot reach my room.
View 9 Replies View RelatedLinksys Wireless Router :: E3200 / Replacing Only Wired Device In Wifi Network
Jan 15, 2012In the next month or so I plan to replace my old desktop PC. It is currently connected to a Linsys E3200 wireless router. I have many other wireless devices also running off the E3200, but my PC is the only wired device connected to it. When I replace the wired PC do I simply switch the new one in with the existing ethernet connection (I'm sure it is not that simple) or do I have to start over again recreating my entire network..security etc.. ? If so what is the process to start over ? Do I have to reset something on the router, reload cisco connect, create a new network name?
View 4 Replies View RelatedLinksys WRT150N - Can't Always See Wireless Network?
May 10, 2011I had a power outage and reset modem and wireless router(linksys WRT150N) I can connect to internet when I use ethernet cable but when I go wireless I sometimes can't see wireless network, sometimes I can see network but it wants WEP password even though security is disables and other times it connects no problem. It happens on both a MAC and a PC.
View 1 Replies View RelatedLinksys Wireless Router :: WRT150N Is A 300 Mbps Or 150 Mbps?
Mar 15, 2013Which is the wireless speed of this router? No speed infos are present in the official web site. In the web some sites say it's a 300, others say it's a 150, others 248...
View 9 Replies View RelatedLinksys Wired Router :: Replacing A BEFSR41 V2?
Feb 20, 2011Comcast upgraded me to a 30 Mbps speed, and my trusty old BEFSR41 v2 doesn't cut it. Cisco promotes wireless routers with a 1 Gbps ethernet, I would rather have a wired router, and use a WAP that I can unplug when I am not using it, since, for now, I only connect my work notebook wirelessly. Most wireless routers also generate a lot more heat than a wired one does, and I don't need any more heat in my Houston home.A new BEFSR41 v4.3 is only 10/100 Mbps. There doesn't seem to be any 1 Gbps wired routers for home use. Will a new BEFSR41 give me 100% of the cable Dociss 3.0 speed, or would I need to get a 1 Gbps router to get the fastest throughput? Or do I only need to upgrade when the cable speed increases closer to 100 Gbps?If a 1 Gbps router is better, are there any simple business wired routers you could recommend?
View 1 Replies View RelatedConnect Wireless - Netgear WNR1000 To Linksys WRT150N And WRT54G?
Aug 17, 2011I am trying to extend the network within our church. The main router currently being used is a NetGear WNR1000. I have two spare lynksys routers (WRT150N and aWRT54G). Can I connect them wireless to extend the network throughout the Church? If so, do I have to hard wire the first two routers or can this be done through the wuireless connection?
View 1 Replies View RelatedLinksys Wireless Router :: Missing MAC Addresses Filtering In Linksys E2500?
Sep 5, 2011I'm currently setting the MAC address filtering for my Linksys E2500 router. I have about 20 devices which i'm allowing to access my router, so i keyed in the MAC addresses into the config page and save setting. But only 16 addresses are registered, the rest refused to register no matter how many times i key in, it just reset back to 00:00:00:00:00:00 after i click on save setting.
View 4 Replies View Related