Linksys Wireless Router :: Unable To Connect To WRT54G
Feb 20, 2010
Checked cable router (brighthouse), working. Router (all lights on but network traffic flashing indicates one way traffic). So I go to my wife's computer. It too has no connection. I open my laptop to connect to the wireless, IT WORKS! Pull power on Cable Modem and Router, wait 60 secs, power up Cable Modem and then power up Router (I know it wasn't nec to do modem but I wanted a clean start). Wireless is still working, no LAN. I can't even connect 192.168.1.1. Linksys software says it can't detect the modem. Reset time, hit the magic button in the back and sure enough everything stops working (which I figured). Still can't connect to it, and now I've lost wireless. I connect computer directly to Cable Modem and type this message. Seems to me that Router has failed.
View 3 Replies
ADVERTISEMENT
Sep 8, 2010
I my parents have a WRT54G linksys router, they have a DSL modem. Everything was working fine with the wireless network until one random day POOF! the wireless no longer would connect on laptops. However, the internet is working just fine with the computer that is hardwired up throught the router. Since this is working it lets me know that the router is working fine and routing the connection through hardwire. Hard wired works on laptops but all laptops are unable to join the network and most of the time it will not show up in the list of available networks.Even my iphone wont connect saying unable to join network. We bought a brand new linksys router and same problem. I then took his old router to my house and hooked it up...and WOW it works as it should all devices can connect...even my iphone.
View 2 Replies
View Related
Aug 13, 2012
Due to some reason I had to reset my linksys router WRT54G and now I am not able to connect to internet using my router. I tried coupld of settings followings some suggestion over internet sites but doesn't work for me. Still I get no network access message.
View 1 Replies
View Related
Dec 14, 2011
Im running a linksys wireless router, WRT54G V6 with firmware 1.02.8. It worked before I moved after I moved I can't connect via wireless. hard line works. i've tried resting to factor, i've tried not using ses, not using custom ssid. I've rest it like 5 times retarted the computers. I've hit the little cisco systems button on the front, this makes it work for a few minutes. When I hit the button it will go out then come back on white, and blink around 1-2 blinks per second, it will do this for maybe 1-2min. then stops and changes back to orange. and i get nothing from it. the WLAN light is on like it's working but I cannot detect it with my desktop or laptop, can i can detect 3 other routers around me. I've tried pretty much everything i know to do, tried flashing it, updating, about the only option i have left is throwing it out the window.
View 2 Replies
View Related
Sep 28, 2011
I am using the following model and version:
Â
Model No.: WRT54G, Ver. 7.0
Â
I am not able to connect to the internet through Linksys Wireless Router. Â I have tried pinging the default gateway of the ISP provided router IP from the router utility, "Diagnostic", but I am not able to ping it.
View 7 Replies
View Related
Dec 27, 2011
IPOD Touch 4G that will not connect to internet. it sees the network, requests a password but will not connect. Have been entering the same 8 character password the router uses.
View 5 Replies
View Related
Nov 11, 2007
I have used this router without issue for several years at two addresses on 3-4 computers. Two years ago, the cable tech (Time Warner) hooked it up when he installed the modem (Surfboard SBV5220) which also provides phone service.Â
View 5 Replies
View Related
Jul 7, 2012
I have Lynksys router WRT54G. I have 3 laptops in house connecting to internet with no problem. A new person has moved in with a laptop that has windows 2000. The new person is not able to get an internet connection.
View 9 Replies
View Related
May 31, 2011
OS - Vista Home Premium x32 I have a modem (Comcast) connected to my router (Linksys wireless-g /wrt54g v6) connected to my desktop which runs Vista.recently i am unable to connect to internet using my desktop, but I am still able to use my wireless devices such as wii, laptop, phone, ipad etc. with problem When I first boot up computer I receive error UPnP device host has stopped working. I close that and I have no network connections (linksys or LAN connections-icons) in my network and sharing area. Nothing is listed. When i click diagnose issue i receive the follow error A CABLE IS NOT PLUGGED INTO THE NETWORK ADAPTER "LOCAL AREA CONNECTION* 12" I have changed ethernet cords but still the same error. Nothng has been changed and as stated worked fine 2 days ago. I also did IPCONFIG and all i receive are ETHERNET ADAPTER LOCAL AREA CONNECTION* 12 MEDIA STATE.....MEDIA DISCONNECTED and so on. No IP address is listed.
View 4 Replies
View Related
Sep 18, 2012
I have a WRT54G router that's worked for a very long time. I had WEP security set up and it worked fine until recently. About a week ago my three year old son managed to reset the router (I'm still not sure how). When I go onto the web-based setup page I am unable to change the wireless security setting. I select an option from the drop down menu but then the page reloads and nothing has changed.
View 1 Replies
View Related
Jan 21, 2013
I am unable to login to my router ? I have tried to reset my router and am still unable to login to the online control panel. The steps that I went about resetting the router were pushing the reset button for 30 seconds. That did not work so I pushed the reset button for 30 seconds, unplugged the router while continuing to hold the reset button for 30 seconds, plugged the router back in while holding the reset for 30 seconds.
View 6 Replies
View Related
Mar 24, 2013
I am running a Linksys Wireless G 2.4 GHz Broadband Router Model WRT54G. Â I am unable to open any ports. Â I upgraded to the latest firmware yesterday but still am unable to open any ports. Â I even turned off my Symantec Internet Security Suite Firewall but still am unable to open any ports. Â
View 2 Replies
View Related
Jul 18, 2006
I'm unable to access my linksys wireless g broadband router (WRT54G)'s access gateway. (192.168.1.1)The gateway page doesn't load, at all. It doesn't ask for the user or password at all. On any of my internet browsers (firefox, and internet explorer)Anyway of fixing this would be appropriate.
View 2 Replies
View Related
Jan 14, 2008
I have been trying to change my password and all the settings on my WRT54G V8 router today because I forgot the password, and I can't seem to navigate the Basic Setup page. I can log in (most of the time) after resetting the router, but whenever I try to click on a different tab (like "Wireless", or "Security") it comes up with the page saying "This Page Cannot Be Displayed."Â I'd like to be able to put a password on it (which I have successfully done before on this router) because I live in a college dorm and would like to keep my internet from being bogged down by other people using it.Â
View 9 Replies
View Related
Feb 2, 2007
I'm trying to setup a Linksys wireless-g router model number WRT54G with my DSL connection. I followed the basic instructions that came with the router and towards the end of the process it says detecting network settings with a % bar. The bar fills to 100% and then asks for a password. I've tried the password my DSL company gave me along with various other things like admin etc. After I enter the password I hit enter and it just asks me for the password over and over again.
View 9 Replies
View Related
Oct 22, 2012
I have a few devices at my home that connect wirelessly to the internet via wrt54g. I want to connect to the internet via VPN. I would like to find out if it is possible to connect WRT54G router to the VPN via PPTP or L2TP? The VPN company provided me with PPTP and L2TP credentials. I can access vpn via OpenVPN on computers but I would like my TV connect to the internet also via VPN.
View 5 Replies
View Related
Jul 26, 2012
I have a WRT54G router and although the local connection works the wireless does not. I have tried unpluging the router and replugging, holding the reset button for 30 seconds powering off 30 seconds and then plugging back it for 30 seconds. The ipconfig /all is below.
Â
Windows IP Configuration
Host Name . . . . . . . . . . . . : TN-PCPrimary Dns Suffix . . . . . . . :Node Type . . . . . . . . . . . . : HybridIP Routing Enabled. . . . . . . . : NoWINS Proxy Enabled. . . . . . . . : NoDNS Suffix
[Code].....
View 5 Replies
View Related
Sep 22, 2011
Router: WRT54G
Network: 802.11g (and I'm using WEP)
Wifi Adapter: Intel R Centrino R Ultimate-n 6300 AGN
No. of devices connected to wireless network: 5
My problem is that whenever 2 devices have joined the wireless network, I will not be able to do so despite placing the laptop or iPhone right next to the router, hence getting excellent signal strength. Or, if I am already connected to the network, I get knocked out repeatedly. I don't think it is a hardware or software issue because I'm still able to connect and get a very stable connection after someone leaves the wireless network.This is getting frustrating and I have tried all ways and means to resolve this but to no avail. Is this about some setting that I can tweak, e.g. to allow more users onto the network? But this has already been configured to '50'!
View 7 Replies
View Related
Feb 1, 2009
I could not log into any of the 4 FTP sites that I normally update without immediately getting disconnected. The message I am getting from the servers is "Port command failed, error loading directory - disconnected". To save some time and posts, here are the facts....1.) It is definately not my DSL modem. When I connect directly with the modem, without a router, I can connect to FTP fine2.) I have already done a /flushdns in IPconfig.3.) I have already done the typical power off/power on/reboot procedure numerous times.4.) I have already tried PASV mode, and tried turning PASV mode off as well.5.) My login information is correct, and I have problems on multiple sites.6.) This problem has been reported before by other users of WRT54G, but the other forums I see have no solution to the problem.7.) I have already tried using other PC's and different FTP clients on my home network. No matter which PC or laptop I use behind the router firewall, I can't maintain FTP connection. 8.) I have never had to open ports to be able to connect to FTP, since I am the one doing the request. I did also try opening ports 20 and 21. 9.) XP firewall is disabled. 10.) I have tried both ethernet ports on my PC. But then again, that is irrelevant because none of my other PC's which connect wirelessly, can connect either.
View 5 Replies
View Related
Dec 13, 2011
i have a LINKSYS  WRT54G router .. i bought an apple ipod touch recently  and i am unable to connect it to my wifi network. My ipod detects the wifi network but when i select it , it asks for password. now i dont know which password is this bcoz everytime i poer on my computer or laptop i never type a password b4 accessing internet.. it is auto connected. i know the admin password for my router but that is denied by ipod to connect to internet. Is there any other password we have to give for connecting deveices through LINKSYS or some changes i need to do in my connection ?
View 2 Replies
View Related
Oct 12, 2010
I am replacing a WRH54G with a WRT54G. Â First I unplugged everything and waited 5 minutes. Then I plugged my ethernet cord from the DSL modem into the WRT54G. Then I plugged in the DSL modem. I waited for the lights to stop blinking. Then I plugged in the WRT54G and waited for LEDs to show connection. Then I plugged the ethernet cord from the WRT54G to the computer. Then I turned on the computer. I was able to access the Interface for the WRT54G but I was not able to connect to the internet. I tried power cycling multiple times both the DSL modem and the WRT54G. I was unable to access the internet. Finally I plugged the WRH54G back in and everything worked fine. why the old WRH54G can connect to the internet and the WRT54G cannot?
View 9 Replies
View Related
Nov 23, 2011
 I have a new android, MyTouch Q, through T-mobile.  The phone says it is connected and the wireless icon appears, but I can't access any data or websites.  I've done a hard reset, unplugged both the router and the modem for several minutes, called the phone manufacturer (LG), the carrier (t-mobile), and the internet provider (Cox cable).
View 3 Replies
View Related
Nov 19, 2011
My router used to work. I updated the firmware to 4.21. xx and after that I can't connect to internet.When I connect directly to modem, I can go to the internet . I power recycled etc but when I connect to the router, it says limited connectivity. It shows autoconfigurtion ip:169.254.251.135. I don't know why this is so.I don't have the setup cd disk but I read the users' guide and it seems that I really don;t need the cd. But no matter what I do , I can't get to 192.168.1.1 .
View 4 Replies
View Related
Aug 28, 2011
I have a wrt54g v5 router. I cannot connect to the internet through my router. I called the cable company and they told me that the router probably reset from a power outtage and reconnect. i power cycled, i tried to log onto the router via 192.168.1.1 but the connections were spanish to me.
View 2 Replies
View Related
May 20, 2012
I owned a WRT54G and have been using it for years with no issue.I'm considering of trying to move this to another room by adding powerline network to the home with something like Linksys PLSK400.
View 1 Replies
View Related
Jan 31, 2013
Is there a way to connect my usb only printer to my WRT54g router?
View 1 Replies
View Related
Dec 30, 2012
All networking had been working great until recent power failure. Then laptops failed to connect, found my router WRT54G had become insecure. I open the router using "admin", reset Wireless Security and reset my password. Wireless laptops, wireless camera now works fine but now iPhone will not connect? I have double checked the password, it is the same as the router. Is there something else in the router that needs changing for the iPhone connection?
Â
[code]...
View 3 Replies
View Related
Nov 27, 2012
I have a WRT54G router and a Dell computer. I have been connecting wirelessly to this router with this computer for about 3 years. Now, the computer sees the router but it won't connect to the internet. I have other computers that connect fine, so I thought it was the wireless adapter in my computer. However, I went to someone else's house and connected perfectly.
View 3 Replies
View Related
Apr 9, 2012
When i connect my computer directly to my modem i could connect to the internet but when i connect the modem to the internet port on the WRT54G and then connect my computer to one of the ports on it i can't connect to the internet at all.
View 5 Replies
View Related
Jan 2, 2012
I am trying to replaced our wired router (BEFSR41) with a wireless router (WRT54G V5) that we have floating around. Â When connected through the wireless router, I am unable to access 192.168.1.1. Â I went to the command prompt and The IP Address and the Default gateway are both blank. Â I even tried to manually set the default gateway to 192.168.1.1 but I was still unable to connect. Â Currently, I am connected directly to the modem so that I may use the internet for troubleshooting. Â I've tried releasing and renewing the ip, but it will not renew.
View 2 Replies
View Related
Jan 3, 2012
My BOSS have a iPhone 3GS. He tells me that iPhone wireless connect to his home AP. Why he has to input password everyday whenever he first time wireless connects to WRT54G at office. What should I do for my BOSS to wireless connect to WRT54G without input password everyday? By the way, I set wireless security as WAP2-personal AES.
View 1 Replies
View Related
Nov 18, 2012
I have a WRT54G version 3.. i have finished installed it using the web based set up but i can't connect my mobile through the wireless network.
View 1 Replies
View Related
Feb 9, 2012
I had a Linksys WRT54G Router with a Netgear GS116 Switch and everything worked great. Upgraded to a new Linksys E4200 Router for faster wiress, default settings, and it won't connect to my switch, here is the breakdown...- No LED's light up when I plug the Switch into the E4200 LAN ports via patch cable (Switch has auto uplink so no crossover needed)- E4200 Ports work fine when I plug devices directly into them, LED's light up and everything.- Switch works fine when connected to the WRT54G, LED's on both devices light up when connected to eachother.- Tried different ports, different patch cables, even tried setting E4200 to bridge mode to just see if I could get the LED's to light up.
View 3 Replies
View Related
