Linksys Wireless Router :: Using WAG120N In Bridged Mode With EA4500

Sep 30, 2012

I'm trying to use my WAG120N router as a modem only/Bridged Mode and I've managed to enter all my settings needed on the WAG120N which is the Encapsulation to Bridged Mode Only, QoS to UBR, Type Of Connection to LLC, VPI and VCI to 0 and 35, DSL Modulation to Multi mode.On the EA4500's end I've entered my Usrname and password in the Internet settings and configured for PPPoE.

View 8 Replies


ADVERTISEMENT

Linksys Wireless Router :: Can't Connect To Cisco EA4500 In Bridged Mode

Feb 20, 2013

I put the ea4500 on Bridged mode, and now I cant connect!I know I have to put the new ip address, and when I do I choose direct conect, it ask me for a password, I put the password, I click to connect, and then it just sits there in waiting....

View 9 Replies View Related

Linksys Wireless Router :: EA4500 In Bridged Mode - Nothing Appears On Screen

Nov 2, 2012

EA4500 in bridged mode and I can log in the the CCC account but nothing appears on the screen. I was able to see the settings, etc with the previious firmware. I reset the router and tried different browsers, PC, etc. Now running Ver.2.1.39.144146.

View 9 Replies View Related

Linksys Wireless Router :: Vigor 120 Bridged With EA4500 Extremely Slow Connection

Feb 1, 2013

I've set up PPPoE on my EA4500 router with a Vigor 120 modem in bridged mode and it says an internet connection is established, but the connection is extremely slow on all my devices. When I run the speed test within the EA4500 firmware it appears fine, but I cannot load any web pages on my laptop or other decives because the connection is so slow. The connection is slow with both wired and wireless connections. I've tried changing the MTU settings with no success. I've also tried using a different router and connecting the modem directly to my laptop and using PPPoE within the laptop and these both work fine, so I think it's clear there is a problem with the EA4500 router itself.
 
I'm just using the Vigor 120 to authenticate and connect to the internet itself, with the router in DHCP automatic configuration mode. I think this is causing a double NAT.

View 9 Replies View Related

Linksys Wireless Router :: Ea3500 Bridged Mode And Windows Network Drive?

Apr 5, 2013

I'm runing an ea3500 in bridged mode, classic configuration, firmware 1.0.30 build 126544. I got ftp working for my usb attached wv delements drive , but it is totally invisible in windows (except for ftp of course).I read in an older post that the usb drive in certain situations does not work (independent of disk manufacturer/type and such) and for certain configurations the ftp option might work but the windows mapped network drive doesn't , does that still apply? does it apply to bridged mode ?

View 1 Replies View Related

Linksys Wireless Router :: Guest Wireless Access In Bridged Mode E4200v1?

Nov 25, 2012

I have an e4200v1 in bridge mode (LAN IP 192.168.1.2) connected via its WAN port to a LAN port on the primary router at 192.168.1.1.
 
Guest Wireless works perfectly in Ver. 1.0.04 build 11 but not in Ver. 1.0..05 Build 7.

View 9 Replies View Related

Linksys Wired Router :: Use BEFSR41 In Bridged Mode?

Jul 22, 2009

I cannot find any explicit instructions on this.  Maybe they're calling it other things or implying it in other settings. 
 
How do I configured a BEFSR41 to operate in bridged mode?

View 4 Replies View Related

Linksys Wireless Router :: EA4500 Bridge Mode Might Have A Bug

Jun 20, 2012

Started setting up a Linksys EA4500 Yesterday.
 
- Bridge Mode
- Router Address Manually specified
- Manual wifi setup
 
Regular access works. My smartphone obtains IP address, connects, accesses pages.Guest access loops through the "obtain IP address" step. Bridge mode might have a bug?

View 9 Replies View Related

Linksys Wireless Router :: How To Connect To EA4500 In Bridge Mode

Jan 16, 2013

I configured the EA4500 to work in bridge mode, to use it as an accespoint for an existing network (Linksys WRT610N). It gets an IP address (192.168.1.141), but does not offer a wireless network (the ethernet ports do offer network acces). When I try to access the configuration on IP address 192.168.1.141 I get the Linksys Smart Wifi page asking for the password. When I enter the password, a message "Waiting" appears and that's all. It keeps me waiting forever and I cannot access the configuration settings.I have tried to reset the router (30sec. reset button, power off 30sec, power on) but the result is the same.

View 6 Replies View Related

Linksys Cable / DSL :: X2000 Bridged Mode Only?

Dec 23, 2011

I have been trying this for ours and need to get it to work for a small branch office so I can get their cisco device connected and phones working.
 
The device works fine if I assigned it an IP address but the minute I set bridge mode only and assign the static IP to my system then nothing works. I have the latest firmware.

View 1 Replies View Related

Linksys Cable / DSL :: Using Wag120N In Wireless Client Mode?

Jul 1, 2012

My house has 2 floors.In the first floor i have a wag160n connected to adsl internet.On the second floor i want to use my old wag120n to connect wirelessly to the router in the first floor and redistribute the internet through his ethernet ports(through wag120n ethernet ports).I want to do this because on the second floor where the tv is i want to connect a dreambox that has only ethernet connection so i can give internet to it via the wag's 120n ethernet ports.

View 2 Replies View Related

Linksys Cable / DSL :: WAG54G2 Switch To Bridged Mode Only?

Oct 20, 2010

My Encapsulation router WAG54G2  switch RFC 2516 PPPoE to Bridged mode only everyday and all configuration that i made will reset and also Application & Gaming button error when i click.I'v reset to factory default and upgrade the firmwire to the latest one but it not work also  I replace the device but nothing changed.The problem will solve if I cut the powir off and restarted agein. 

View 3 Replies View Related

Linksys Cable / DSL :: RVS 4000 Connected To WAG160N Bridged Mode Only

Feb 26, 2012

I'm trying to connect my WAG160N as a ADSL modem (disable the router function) and connect a real router (RVS4000) So, i put my WAG160N on birdged mode only, disable the DHCP on my RVS4000, i did configure my PPPOE access (user and password), change the IP adress 192.168.0.2 configure the DHCP ... and connect ... no way !
 
i tryed to connect either with cross cable or a direct cable ... same result. I can get access to the RVS4000 192.168.0.2 bit cannot get acess to my WAG160N 192.168.0.1 (strange ... don't have explanation for that) even a simple ping !
 
when i try to test the connection on my RVS4000 ... it seems that my connection is up .

View 7 Replies View Related

Linksys Cable / DSL :: WAG54G2 Switches To Bridged Mode Every Few Hours?

Jun 28, 2012

I have a WAG54G2 working fine for more than 2 years now. It has the initial firmware version 1.00.10
 
Recently I mode it from my home to my store, where I have a already working CCTV setup. Initially the router did not work, but once the service provider removed the mac-id binding (with my previous ADSL2+ router) the WAG54G2 was connecting on DSL. However it never got a DNS value. Currently I am using it with a fixed DNS.
 
After a few days of working I noticed that my remote viewing for the CCTV was not working. On checking the router settings I saw that the router had defaulted to no settings at all. Changing it back to PPPoE did not work since the page would not render completely. Resetting to Factory settings also did not work. However simply switching off the router and restarting it worked. I let it go then. The same thing happened again within a day or two. Each time restarted the router seemed to solve the problem, however temporarily. 
 
I have the SPI firewall enabled also I have application port forwarding set for HTML port 80 forwarding to say port 1234.

View 2 Replies View Related

Cisco WAN :: EPC3825 In Bridged Mode Only (not Router)

Jul 10, 2011

I would like to convert my cable modem Cisco epc3825 (bridge only), and thus can not function as a router. Before if I could, but my Internet Service provider has updated the firmware epc3825 and I can not pass it on to cable modem (bridge only).

View 2 Replies View Related

Linksys Cable / DSL :: Bridge Mode On WAG120N

Apr 24, 2013

I have a WAG120N. I wish to use it as a modem only and not as a wireless router.I have another wireless router I want to use to handle network connectivity.I want the wag to be set to 10.10.1.1 and I want my router on 10.10.1.2What bridge mode do I set on my wag? Do I need a crossover cable?

View 1 Replies View Related

Cisco WAN :: 867 Half-bridged Mode?

Apr 18, 2011

I'm a Cisco newbie and I'm in the following situation:
 
1>The router (867) must connect to my ISP in 1483 bridged (2684 bridged) mode, LLC, VPI/VCI 0/35
2>WAN IP will be assigned by ISP (DHCP)
3>No username and password required to establish the connection
4>MAC-Cloning is advised, not required
5>Firewall behind 867, WAN IP should be assigned to WAN interface firewall, connection established by 867
6>867 router will be used as a switch, so no NAT required. NAT will be setup on the firewall
7>Connection type: Analog (annex A)
 
The required setup can be fixed by configuring the 867 in half-bridged mode, but I don't no how and I don't know exactly how to config the 867 in bridged mode.
 
First, it's even hard to setup a good bridged config.

version 15.1no service padservice tcp-keepalives-inservice tcp-keepalives-outservice timestamps debug datetime msecservice timestamps log datetime msecservice password-encryptionservice sequence-numbers!hostname router1!boot-start-markerboot-end-marker!logging buffered 51200logging console criticalenable secret 5 ****!no aaa new-modelmemory-size iomem 10clock timezone GMT 1clock summer-time GMT date Mar 30 2010 1:00 Oct 26 2035 1:59!!no ip source-route!ip cefno ip bootp serverno ip domain lookupip domain name domain.local!!!!username admin privilege 15 secret 5 ***!!ip tcp synwait-time 10ip ssh time-out 60ip ssh authentication-retries 2!!!!!!!interface ATM0 no ip address no atm ilmi-keepalive!interface ATM0.1 point-to-point pvc

[code].....

View 10 Replies View Related

Linksys Wireless Router :: How To Connect To A E4200 That Is Bridged

Dec 10, 2011

I have 2 E4200's . One is connected to my ADSL Modem as DHCP and the other one is Bridged to the DHCP. I'm trying to connect to my E4200 that is set as Bridged. I am able to connect to my E4200 that is set as DHCP, but I cannot connect to the E4200 that is connected to that DHCP as Bridged.
 
How can I connect to that bridged E4200 because I want to upgrade the Firmware of the Bridged E4200?.

View 1 Replies View Related

Linksys Wireless Router :: EA6500 Bridged To EA4200 V1?

Nov 10, 2012

had a EA4200 about a year now, no probs, very stable, i'm thinking about getting a EA6500, for better coverage, iPhone apps, etc, would like to use my EA4200 in bridge mode from a EA6500,  I'm a fairly new to networking etc, i'm assuming when the EA4200 is bridged, it will act like a repeater connected by cable, with same SSID ?

View 7 Replies View Related

Linksys Wireless Router :: EA3500 Bridged To Airport Express?

Dec 28, 2012

I have just recently replaced my Netgear router with an EA3500 and have it bridged t an Airport Express. From there I have an ethernet cable attached to an AV receiver (Pioneer 1021k), but all to often now with this new router to use any of the features of the receiver ie Airplay, iOS app remote, I must restart the router EVERY time. This is frustrating because the these issues were never present with the netgear router.

View 9 Replies View Related

Cisco Application :: ACE-20 Module In Bridged Mode With Client NAT

Apr 15, 2012

Whatever a NAT is supported for ACE-20 module? I do need to convert working CSM(SLB) config to ACE configuration and I am not quite sure if the configuration below is correct. ACE module should be configured in bridge mode with two vlans - vlan 36 (client) and vlan 436 (server) - bridged with interface bvi 36. NAT on ACE configurad as "nat dynamic 1025 vlan 436" into corresponding "policy-map type loadbalance". Check two parts of configs and if the ACE config is properly converted from CSM and will be working in the same way (especialy for NAT). [code]

View 2 Replies View Related

Cisco Routers :: RVS4000 - Connecting WAG160N Bridged Mode Only

Feb 26, 2012

I'm trying to connect my WAG160N as a ADSL modem (disable the router function) and connect a real router (RVS4000)So, i put my WAG160N on birdged mode only, disable the DHCP on my RVS4000, i did configure my PPPOE access (user and password), change the IP adress 192.168.0.2.configure the DHCP and try to connect. i tryed to connect the RVS4000 and the WAG160N either with cross cable or a direct cable. I can get access to the RVS4000 192.168.0.2 and get access to the configuration menu but cannot get access to my WAG160N 192.168.0.1 even a simple ping.when i try to test the connection on my RVS4000 (status) it seems that my connection is up but i cannot get access to internet.

View 6 Replies View Related

Cisco Routers :: RFC 1483 Bridged EoA SRP527W In Bridge Mode?

Jun 5, 2012

I've a Cisco SRP527W, it have a LAN in 192.168.1.0 range, now I need to put in bridge mode, to be transparent with my firewall, how can I do this?

View 3 Replies View Related

Cisco Application :: 6509 - ACE Module Context On Bridged Mode

May 8, 2013

I am desiging a topology with two Cat 6509 and Two ACE Module, one ACE per Catalyst. I am thinking to  use bridge mode for the customer contexts, I would like to know if the Bridged mode is an Assymetric topology.
 
The server gateway is the ip address of the ACE or the Router?

View 6 Replies View Related

Cisco WAN :: 1811W Accessing Web Interface On ADSL Modem In Bridged Mode

Nov 8, 2012

Using Cisco 1811W with IOS 15.1(4)M5.  FE0 and FE1 are connected to the internet via Billion ADSL2+ modems operating in bridged mode.  Both lines are similar so I'll only discuss FE0 from this point on.Local subnet is 192.168.128.0/24 with router on 192.168.128.1 as default gateway.  Modem on FE0 has static LAN IP of 192.168.128.2 and when plugged into the switch on the LAN side, the web interface can be accessed at that IP address.  Unplug the modem from the switch and plug it into FE0 and it now works as desired providing access from the router to the internet but the web interface is no longer accessable at 192.168.128.2
 
I tried adding a static route "ip route 192.168.128.2 255.255.255.255 FastEthernet 0" and also "ip route 192.168.128.2 255.255.255.255 Dialer 1"  Neither worked and presumably it isn't that straight forward.  Possibly NAT or other routing configuration required.Although there isn't much to configure when in bridged mode, I mostly want this setup so I can look at the ADSL connection status and for the modem to write messages to syslog (works when plugged into switch on LAN side), or SNMP access.

View 3 Replies View Related

Cisco Application :: ACE 4710 / Module Routed Versus Bridged Mode

Nov 10, 2010

I understand routed vs bridged mode configuration fairly well, however, I do not understand the pros/cons between using them.

View 6 Replies View Related

Linksys Wireless Router :: Guest Access Breaks If E1200 Set Up As Bridged Wireless

Sep 23, 2012

I want to set up an E1200 as a wireless access point for guests, and ordinarily I'd be happy to connect it LAN-to-WAN and have it create its own subnet, but I need to connect one office PC to it also because connecting the E1200 to the main gateway displaces that office PC from the last Ethernet port on the main router.
 
So I disabled DHCP on the E1200 and connected it LAN-to-LAN.  The modem is at a fixed, non-configurable address of 192.168.0.1/255.255.0.0 and the main router is at 10.0.0.1/255.255.255.0.   I set the E1200 to a static IP of 10.0.0.12/255.255.255.0.The E1200's primary wireless connection works fine.  The guest access connects, but it does not prompt for a password and web pages generate a "failed to load" sort of message.I temporarily connected the E1200 as the main router and re-enabled DHCP, though I kept the static IP of 10.0.0.12/255.255.255.0, and in this configuration the guest access worked.  I observed that it connected via 192.168.33.1/guestaccess.cgi (or something very similar to that).

View 2 Replies View Related

Ea4500 As A Wireless Access Point Only Mode

Aug 18, 2012

Ea4500 as a wireless access point only mode

View 1 Replies View Related

Linksys WAG120N - Wireless Contacts To Router But Not Internet

Aug 16, 2011

I have an wireless issue with my laptop (asus). It connects to my router (linksys WAG120N) but then won't connect to the internet. I have tried everything I can think of, including disabling all antivirus software, removing wireless network and allowing auto reinstall, obtaining DNS servers automatically, etc. I have checked the IP addresses with Linksys support and all indicators suggest that it should connect. My laptop does connect perfectly well when directly connected to the router via ethernet cable. Plus my iMac connects wirelessly to the router. I run XP sp 3 on the laptop.The wireless adapter is an Atheros AR5007EG, driver version 7.6.0.239.

View 4 Replies View Related

Linksys Wireless Router :: WAG120N - Cannot Access Web Interface

Feb 24, 2013

I have linksys WAG120N model with 20.0.0.2024 LAN IP and i  connected  it with SpeedTouch 510 dsl router(IP 10.0.0.138) that act as gateway to internet , i have configure 1st ethernet port on my linksys asWan with static ip 10.0.0.10024 ,10.0.0.138 G.W & configure DHCP in it, the problem that i can't access to my linksys web interface (ip 20.0.0.20 or 10.0.0.100)via 10.0.0.0 network.

View 3 Replies View Related

Linksys Cable / DSL :: WAG120N Wireless Router Disconnects?

May 4, 2012

My WAG120N wireless router disconnects every hour, precisely at the same time. This problem has started a few days ago, until then everything was fine.When the connection is gone, the "Internet" light goes off, the other lights remain on. For example, it disconnects at 07:30. It takes a minute or two to reconnect. Then it disconnects at 08:31. It reconnects, and then disconnects at 09:32.. and so on.Here are the things that I have tried (with my limited knowledge.. I'm not good with technology):- Turned the power on/off. No matter what time I do this at, the router disconnects at the same time again. For example, if it last disconnected at 07:30, and I turn it off and on at 7:50, it still disconnects at 08:31.- I tried resetting it, by pushing and holding the reset button on the back for 30-60 seconds (did it several times). Reconfigured the router (manually, not from a backup config file). Same situation as above, disconnects at the same time as always.
 
- I upgraded the IOS to v1.00.16, which I found here: [URL] reset and then reconfigured again. Still it didn't work.- Looked in the configuration pages for any values that resemble a 60 minute time span, and changed them. Only thing I found was the security key renewal period. Or was I sold a faulty product?

View 6 Replies View Related

Linksys Wireless Router :: Bridging Between WAG120N And E1500?

May 12, 2012

I have my internet coming into my WAG120N and going out wirelessly. I want to setup a wireless bridge between this and an E1500, so I can connect my TV to the E1500 (via an ethernet cable) and have it access the internet. Unfortunatly I can run a cable from the WAG120N to where the TV is. So it I can get the E1500 wirelessly bridged to the WAG120N? I have updated the firmware ont he E1500 to get Bridging support, but from what I can tell it only provides bridging via an ethernet cable. Is there away to bridge wirelessly?

View 1 Replies View Related

Linksys WRT54G2 Router Won't Recognize Bridged Modem?

Aug 19, 2011

I have a Speedstream 4300 modem in bridge mode and a linksys WRT54G2 router set to PPPoE like I was instructed. On the status page of my router underneath the PPPoE setting it has IP, Subnet Mask, and Gateway all set to 0. The only advice I was able to obrain from my ISP was to powercycle the router and modem, which I did and no change.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved