Linksys Wireless Router :: Can't Connect To Cisco EA4500 In Bridged Mode

Feb 20, 2013

I put the ea4500 on Bridged mode, and now I cant connect!I know I have to put the new ip address, and when I do I choose direct conect, it ask me for a password, I put the password, I click to connect, and then it just sits there in waiting....

View 9 Replies


ADVERTISEMENT

Linksys Wireless Router :: Using WAG120N In Bridged Mode With EA4500

Sep 30, 2012

I'm trying to use my WAG120N router as a modem only/Bridged Mode and I've managed to enter all my settings needed on the WAG120N which is the Encapsulation to Bridged Mode Only, QoS to UBR, Type Of Connection to LLC, VPI and VCI to 0 and 35, DSL Modulation to Multi mode.On the EA4500's end I've entered my Usrname and password in the Internet settings and configured for PPPoE.

View 8 Replies View Related

Linksys Wireless Router :: EA4500 In Bridged Mode - Nothing Appears On Screen

Nov 2, 2012

EA4500 in bridged mode and I can log in the the CCC account but nothing appears on the screen. I was able to see the settings, etc with the previious firmware. I reset the router and tried different browsers, PC, etc. Now running Ver.2.1.39.144146.

View 9 Replies View Related

Linksys Wireless Router :: How To Connect To EA4500 In Bridge Mode

Jan 16, 2013

I configured the EA4500 to work in bridge mode, to use it as an accespoint for an existing network (Linksys WRT610N). It gets an IP address (192.168.1.141), but does not offer a wireless network (the ethernet ports do offer network acces). When I try to access the configuration on IP address 192.168.1.141 I get the Linksys Smart Wifi page asking for the password. When I enter the password, a message "Waiting" appears and that's all. It keeps me waiting forever and I cannot access the configuration settings.I have tried to reset the router (30sec. reset button, power off 30sec, power on) but the result is the same.

View 6 Replies View Related

Linksys Wireless Router :: Vigor 120 Bridged With EA4500 Extremely Slow Connection

Feb 1, 2013

I've set up PPPoE on my EA4500 router with a Vigor 120 modem in bridged mode and it says an internet connection is established, but the connection is extremely slow on all my devices. When I run the speed test within the EA4500 firmware it appears fine, but I cannot load any web pages on my laptop or other decives because the connection is so slow. The connection is slow with both wired and wireless connections. I've tried changing the MTU settings with no success. I've also tried using a different router and connecting the modem directly to my laptop and using PPPoE within the laptop and these both work fine, so I think it's clear there is a problem with the EA4500 router itself.
 
I'm just using the Vigor 120 to authenticate and connect to the internet itself, with the router in DHCP automatic configuration mode. I think this is causing a double NAT.

View 9 Replies View Related

Linksys Wireless Router :: Ea3500 Bridged Mode And Windows Network Drive?

Apr 5, 2013

I'm runing an ea3500 in bridged mode, classic configuration, firmware 1.0.30 build 126544. I got ftp working for my usb attached wv delements drive , but it is totally invisible in windows (except for ftp of course).I read in an older post that the usb drive in certain situations does not work (independent of disk manufacturer/type and such) and for certain configurations the ftp option might work but the windows mapped network drive doesn't , does that still apply? does it apply to bridged mode ?

View 1 Replies View Related

Linksys Wireless Router :: Guest Wireless Access In Bridged Mode E4200v1?

Nov 25, 2012

I have an e4200v1 in bridge mode (LAN IP 192.168.1.2) connected via its WAN port to a LAN port on the primary router at 192.168.1.1.
 
Guest Wireless works perfectly in Ver. 1.0.04 build 11 but not in Ver. 1.0..05 Build 7.

View 9 Replies View Related

Linksys Wired Router :: Use BEFSR41 In Bridged Mode?

Jul 22, 2009

I cannot find any explicit instructions on this.  Maybe they're calling it other things or implying it in other settings. 
 
How do I configured a BEFSR41 to operate in bridged mode?

View 4 Replies View Related

Linksys Wireless Router :: EA4500 Bridge Mode Might Have A Bug

Jun 20, 2012

Started setting up a Linksys EA4500 Yesterday.
 
- Bridge Mode
- Router Address Manually specified
- Manual wifi setup
 
Regular access works. My smartphone obtains IP address, connects, accesses pages.Guest access loops through the "obtain IP address" step. Bridge mode might have a bug?

View 9 Replies View Related

Linksys Wireless Router :: How To Connect To A E4200 That Is Bridged

Dec 10, 2011

I have 2 E4200's . One is connected to my ADSL Modem as DHCP and the other one is Bridged to the DHCP. I'm trying to connect to my E4200 that is set as Bridged. I am able to connect to my E4200 that is set as DHCP, but I cannot connect to the E4200 that is connected to that DHCP as Bridged.
 
How can I connect to that bridged E4200 because I want to upgrade the Firmware of the Bridged E4200?.

View 1 Replies View Related

Linksys Cable / DSL :: X2000 Bridged Mode Only?

Dec 23, 2011

I have been trying this for ours and need to get it to work for a small branch office so I can get their cisco device connected and phones working.
 
The device works fine if I assigned it an IP address but the minute I set bridge mode only and assign the static IP to my system then nothing works. I have the latest firmware.

View 1 Replies View Related

Linksys Cable / DSL :: WAG54G2 Switch To Bridged Mode Only?

Oct 20, 2010

My Encapsulation router WAG54G2  switch RFC 2516 PPPoE to Bridged mode only everyday and all configuration that i made will reset and also Application & Gaming button error when i click.I'v reset to factory default and upgrade the firmwire to the latest one but it not work also  I replace the device but nothing changed.The problem will solve if I cut the powir off and restarted agein. 

View 3 Replies View Related

Linksys Cable / DSL :: RVS 4000 Connected To WAG160N Bridged Mode Only

Feb 26, 2012

I'm trying to connect my WAG160N as a ADSL modem (disable the router function) and connect a real router (RVS4000) So, i put my WAG160N on birdged mode only, disable the DHCP on my RVS4000, i did configure my PPPOE access (user and password), change the IP adress 192.168.0.2 configure the DHCP ... and connect ... no way !
 
i tryed to connect either with cross cable or a direct cable ... same result. I can get access to the RVS4000 192.168.0.2 bit cannot get acess to my WAG160N 192.168.0.1 (strange ... don't have explanation for that) even a simple ping !
 
when i try to test the connection on my RVS4000 ... it seems that my connection is up .

View 7 Replies View Related

Linksys Cable / DSL :: WAG54G2 Switches To Bridged Mode Every Few Hours?

Jun 28, 2012

I have a WAG54G2 working fine for more than 2 years now. It has the initial firmware version 1.00.10
 
Recently I mode it from my home to my store, where I have a already working CCTV setup. Initially the router did not work, but once the service provider removed the mac-id binding (with my previous ADSL2+ router) the WAG54G2 was connecting on DSL. However it never got a DNS value. Currently I am using it with a fixed DNS.
 
After a few days of working I noticed that my remote viewing for the CCTV was not working. On checking the router settings I saw that the router had defaulted to no settings at all. Changing it back to PPPoE did not work since the page would not render completely. Resetting to Factory settings also did not work. However simply switching off the router and restarting it worked. I let it go then. The same thing happened again within a day or two. Each time restarted the router seemed to solve the problem, however temporarily. 
 
I have the SPI firewall enabled also I have application port forwarding set for HTML port 80 forwarding to say port 1234.

View 2 Replies View Related

Cisco WAN :: EPC3825 In Bridged Mode Only (not Router)

Jul 10, 2011

I would like to convert my cable modem Cisco epc3825 (bridge only), and thus can not function as a router. Before if I could, but my Internet Service provider has updated the firmware epc3825 and I can not pass it on to cable modem (bridge only).

View 2 Replies View Related

Linksys Wireless Router :: Unable To Connect To EA4500

Oct 2, 2012

Just purchased a ea4500 router. Have setup multiple computers/devices already and works great. This computer (HP dv6000 running Win Vista home prem) however will not connect to the internet. It states that it is connected to the router (computer sees router), using the cloud connect app on my iphone i can see this computer, but will not allow access to the internet (local connection only). It works fine with the wired connection. When attempting to use the cloud connect software, it says it was unable to complete the install. Have attempted trying while connected by wire as well, same result. Have deleted the wireless connection and allowed software to find connection, still same result, cannot install. Wireless worked perfectly with previous router (WRT54G) three days ago.

View 6 Replies View Related

Linksys Wireless Router :: EA4500 Cannot Connect To Ciscoconnectcloud

Nov 18, 2012

I upgraded my router's firmware automatically.  Then I wasn't able to connect to ciscoconnectcloud.  I then thought It might be better to do the upgrade manually, so I downloaded the classic firmware, and rolled it back.  I then downloaded the Smart Wifi firmware and the Smart Wifi setup software and did the manual upgrade.  Now, I'm able to connect when I use the old 192.168.1.1 address, but not to ciscoconnectcloud.com, and even then I had to refresh a couple of times to get it to work.

View 1 Replies View Related

Linksys Wireless Router :: EA4500 Won't Connect To Modem

Apr 13, 2013

I can think of from different cables, factory settings, etc. Can't connect to modem straight from computer for some reason, but my old linksys wrt54g still works. I can connect to the router wirelessly and access settings fine. When i try to use cisco connect, the install stops at 25%

View 7 Replies View Related

Linksys Wireless Router :: EA4500 Won't Connect Through PPPoE

Nov 17, 2012

I've been using my EA4500 since it's original launch date as a PPPoE router through another router/modem which is the Netgear DG834G V4 set to Modem Only mode which was working fine for a long time!A month ago, a friend wanted to borrow the Netgear Router and after he gave it back I reset it like I always do and entered my settings in router mode(i.e. username and password) to check if I havewe working Internet connection and that the router is working properly and it was working properly like it was before I lent it. Now comes the problem, if I keep using the Netgear router as the PPPoE handler and make the EA4500 work as "Automatic Configuration DHCP" it works flawlessly but if I set the Netgear router to modem mode and make the EA4500 handle the PPPoE connection, the report in the troubleshooting tab keeps on saying "Connecting" endlessly!
 
Note: I've replicatedthe settings that I used on both router before and after lending it to my friend so there's no difference in settings!

View 6 Replies View Related

Linksys Wireless Router :: EA4500 Cannot Connect To Belkin

Aug 24, 2012

I have the linksys EA4500 now for a few hours and its pissing me off.with my old linksys i got a wireless connection to my Belkin Home Base.this is a usb wifi station.in this usb station there is a seneye. this is a machine to protect my reef tank.i  cant make a wireless connection to my Belkin home base..

View 1 Replies View Related

Linksys Wireless Router :: Cannot Connect Oppo BDP-95 To Cisco EA4500

Dec 23, 2012

I have problem connecting my Oppo blu-ray player (BDP-95) to the CISCO EA4500 router.I had a buffalo router before and everything was fine.I bought the EA4500 a few months ago.  All was fine when I set up the Wi-Fi connection to all my existing devices, including, notebook, iPad, iPhone, TV, etc.  But the only exception is my Oppo blu-ray player.  The oppo player can detect the SSID of EA4500, after entering the security password, it just shows "Connection Failed!"
 
However, my Oppo player can connect to other wireless access point (e.g. the wi-fi sharing from my Android Phone.)I have tested almost everything in the past few months....including, upgrade firmware, factory reset the router, turn off all the security setting in my router.  But none of them works.Frankly speaking, I am quite familar with the setup of such wireless stuffs.  ( I had almost 10 wireless at home and every device was setup without any problem)

View 9 Replies View Related

Linksys Wireless Router :: EA4500 Cisco Connect Cloud

Jul 22, 2012

Keep having trouble with login onto my router (EA4500)Every now and then it will work but more often than not when I try to access it using either myrouter.local or 192.168.1.1, I keep getting an unexpected error message in the middle of the screen and it will go no further.  Or I get no error and just a blue background with no icons or anything.
 
I tried going back in the firmware to what it was when I bought the device which is non-cloud (Ver.2.0.37.131047), but when I did that, I was logging into the router perfectly but had no internet access at all even tho all the gateway and dns details were present on the status page for the internet.  
 
I've put it back to the cloud firmware (Ver.2.1.38.138880) and i'm back to these login problems again so I tried as per request with a cisco advisor in live chat to totally reset the router using the reset button at the back.  Oh that caused problems getting things back online as every time I tried to access the interface I got a 502 error.  I managed to get back online using the cisco disc that came with the router but now I'm back to square 1 with these access problems to the router.
 
I just can't see what is wrong here, it was fine prior to it updating itself to the cloud software, but it has been problem galore ever since.I am running Ubuntu Linux and have tried both firefox and chrome browsers which doesn't seem to matter.I have tried my sons laptop running vista which gets the same problem.I have tried disconnecting everything else on my network apart from my PC (the linux one) which is ethernet cabled direct to the router.The cloud app for my HTC does work but has very limited settings and runs extremely slow.
 
Might be worth mentioning that this morning when I tried accessing from google chrome, in the error box also popped up the following message, 'error_get_networks', this is the first time I saw this message so don't know if its of any relevance.  I do have set in the settings that my DHCP server starts at 192.168.1.201 and most of the computers in my house have a static IP address so I don't believe anything is clashing to cause any errors.

View 8 Replies View Related

Linksys Wireless Router :: EA4500 Guest Access Does Not Connect?

Apr 18, 2013

My EA4500 has the newest firmware and is properly configured to support 20+ wireless and wired devices. It does this job well.Guest Access, however, is a problem. It works for about a day, then stops.Guests can access the login screen and enter the password. Then nothing happens. The screen appears to "load", but it does not connect.I have tried returning to default settings and reconfiguring and reupdating firmware. I have tried turning Guest Access on and off, as well as resetting the password.The only that works is rebooting the router. This is obviously not practical, especially for a contract client.

View 4 Replies View Related

Linksys Wireless Router :: EA4500 Xbox Won't Connect Live

Sep 9, 2012

More often than not, when my son wants to play on Xbox Live, the Xbox won't connect to Xbox Live.  It will connect to the network and the internet but not Xbox Live.  After running the connection test, the suggestion is to reboot the modem and router.  It works after rebooting those two devices.  Why does this happen so often? 

View 8 Replies View Related

Linksys Wireless Router :: Cannot Get Camera To Connect To Ea4500 Wirelessly

Aug 11, 2012

Does the EA4500 offer b/g wireless or not. My wireless camera is b. Cannot get it to connect to the ea4500 wirelessly.

View 1 Replies View Related

Linksys Wireless Router :: EA4500 - Unable To Connect Any New Devices?

Sep 28, 2011

I have several devices connected to my EA4500 (two wired computers, two wireless laptops, iPhone, iPad, and a network drive). i have not been able to connect any new devices wirelessly.  New laptops, PS3, friends laptops.  Error message would suggest that password is being entered incorrectly, but I change the password to very basic word (idiot proof) but no luck.

View 9 Replies View Related

Linksys Wireless Router :: EA4500 Disable Cisco Connect Cloud

Jun 26, 2012

My EA4500 router now automatically goes to Cisco Connect Cloud, and I can no longer access my router directly through my browser. I do not want to use Cisco Connect Cloud, for security reasons, so how can I disable the automatic access to the cloud? Use of the Cisco Connect Cloud should be optional, and not mandatory. If the cloud is the only way I will be allowed to make changes in my router, I may just have to return it to the store. Can this "feature" be turned off? 

View 9 Replies View Related

Linksys Wireless Router :: EA4500 USB Printer Without Cisco Cloud Connect

Oct 20, 2012

I recently purchased a EA4500 for my home network. After hours of searching, I couldn't find any evidence to how I can install a USB printer without the obvious Cisco Cloud Connect. I don't need any software or account to access my router over the net nor any of the features CCC provides (at least as of yet). I'm quite comfortable with using the web interface and easily managed to adjust the router for everything I need except the printer part. I certainly have things to print so I have to connect my printer to the router as it is clearly mentioned on its box that I can access my printer through it. As a last resort I tried to install the software on the CD that came with it to get a link for some "Cisco VUSB" software which I think is the solution but it keeps saying my modem is not connected to the net. It clearly isn't because I don't have an internet connection at home. What I have is a 3G connection which I use for communicating and downloads I need. So why do I need an internet connection on the router for anything and how do I install my printer?

View 3 Replies View Related

Cisco WAN :: 867 Half-bridged Mode?

Apr 18, 2011

I'm a Cisco newbie and I'm in the following situation:
 
1>The router (867) must connect to my ISP in 1483 bridged (2684 bridged) mode, LLC, VPI/VCI 0/35
2>WAN IP will be assigned by ISP (DHCP)
3>No username and password required to establish the connection
4>MAC-Cloning is advised, not required
5>Firewall behind 867, WAN IP should be assigned to WAN interface firewall, connection established by 867
6>867 router will be used as a switch, so no NAT required. NAT will be setup on the firewall
7>Connection type: Analog (annex A)
 
The required setup can be fixed by configuring the 867 in half-bridged mode, but I don't no how and I don't know exactly how to config the 867 in bridged mode.
 
First, it's even hard to setup a good bridged config.

version 15.1no service padservice tcp-keepalives-inservice tcp-keepalives-outservice timestamps debug datetime msecservice timestamps log datetime msecservice password-encryptionservice sequence-numbers!hostname router1!boot-start-markerboot-end-marker!logging buffered 51200logging console criticalenable secret 5 ****!no aaa new-modelmemory-size iomem 10clock timezone GMT 1clock summer-time GMT date Mar 30 2010 1:00 Oct 26 2035 1:59!!no ip source-route!ip cefno ip bootp serverno ip domain lookupip domain name domain.local!!!!username admin privilege 15 secret 5 ***!!ip tcp synwait-time 10ip ssh time-out 60ip ssh authentication-retries 2!!!!!!!interface ATM0 no ip address no atm ilmi-keepalive!interface ATM0.1 point-to-point pvc

[code].....

View 10 Replies View Related

Linksys Wireless Router :: Unable To Connect To USB Storage On EA4500 / N900?

Mar 6, 2013

There are plenty of instructions to configure USB storage but there are no instructions on how to use it, specifically.  Ok, so I have my ftp address, user name and password and tried to connect with Filezilla on my local network. Unable to connect.  Also, the USB device does not even show up in Network settings.  However, I am able to see the device as a media server from Sony Playstation.

View 3 Replies View Related

Linksys Wireless Router :: Use USB Hub To Connect More Than 1 Hard Drive Device To EA4500?

Jun 4, 2012

Can I use a USB hub to connect more than 1 hard drive/flash drive device to the EA4500?

View 3 Replies View Related

Linksys Wireless Router :: EA4500 - Reinstall Cisco Connect After Firmware Upgrade

Jun 29, 2012

I upgraded my firmware back to 2.0.37 (after Cisco tried to push that cloud nonsense down my throat) and would like to re-install Cisco Connect. Has anyone successfully reinstalled the Cisco Connect software after those fine folks at Cisco took control of your router and your computer and removed it for you?This is my last Cisco/Linksys product ever. I purchased my EA4500 a week ago and then they pull this crap

View 9 Replies View Related

Linksys Wireless Router :: EA4500 - Visibility Of Devices In Cisco Connect Cloud

Mar 26, 2013

I have EA4500 router with latest firmware update. Cisco Connect Cloud behave strange. Some devices connected to the wireless router appear in CCC and some not. For instance, Iphone is visible, Ipad is not but both have normal accesss to internet.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved