Linksys Wireless Router :: Vizio E3D320VX TV Will Not Connect To Cisco

Sep 5, 2012

just got a Vizio E3D320VX TV and it will connect to my E4200V2 2.4Ghz N-band, but not the 5Ghz N-band. Both 2.4Ghz and 5Ghz are configured virtually identical: 1) both are Wireless-N Only, 2) both auto channel width, 3) both WPA2 Personal security, 4) both SSID broadcast disable.
 
The only differences are: 1) obviously the SSIDs and 2) I manually set the 2.4Ghz channel to the least used in my area. I kept the 5Ghz channel auto.To connect to 2.4Ghz, in the Vizio TV network settings, I left their settings to Auto (DHCP), and put in the SSID name. The TV searches for it, sees that it's WPA2PSK and asks for the password. Put it in and boom it works.When I try on 5Ghz (again on "Auto"/DHCP for the TV), I put in the SSID, and the TV "thinks" about it for awhile, then says something like "Cannot connect, please try another Wireless Access Point". It never gets to the point where it asks for the WPA2 password.
 
The TV is downstairs and the E4200V2 is upstairs, but I used my iPad2 in the same room and it connects to the 5Ghz with no problem. But just in case the TV has a 5Ghz reception problem, I set the channel width to wide/40Mhz and bumped tried a couple of the higher channels (149 and 161), and it still won't connect.I also went into Administration and turned on logging to try to see what is happening when the TV tries to connect, but for some reason nothing is logging, not even my other devices' traffic -- very strange (yes I hit Save Settings after enabling logging).

View 7 Replies


ADVERTISEMENT

Linksys Wireless Router :: WRT54G - VIZIO Blu-ray Internet Player Won't Connect?

Mar 21, 2011

I have WRT54G router.  The VIZIO VBR231 unit finds the network OK and indicates it is connected, but nothing will stream, and  when I run a Network Test it gives me this 3 line error:

Connection to 0.0.0.0... successfully established
Resolving... could not be established
Please check your connection and try again.
 
The VIZIO support folks were not beneficial at all, and said something about Port 80 or Port 43 not being open or available.  When I talked to linksys support, they said I needed to add the VIZIO player's IP (which appears to be 0.0.0.0 in the system settings).  I poked around a bit, including the Port Forwarding tab on the router setup, but could not see a way to assign 0.0.0.0 to one of these ports, and I am hesitant to experiment.
 
I'll probably just return the unit to Costco, but I'm trying this forum as a last ditch effort.  BTW I have a VIZIO internet TV that I love, and that had absolutely no problem at all connecting to the wireless.

View 4 Replies View Related

Linksys Wireless Router :: EA4500 - Allowing Vizio Internet Apps To Connect From Two Different TV's

May 28, 2012

EA4500 Linksys router stopped allowing vizio Internet apps to connect from two different TV's. Problem, Just got brand new EA4500 router and Motorola SURFboard DOCSIS 3.0 High-Speed Cable Modem Model: 575319-019. I have 2 new vizio big screen tv's with internet apps. All was working fine and had no problems but occasional drops or limited access.
 
One day BOTH TV's could no longer connect. However, The tv's will connect to another access point. therefore the problem does not exist in the TV/s and has to be a problem in my access point (I.E. Router allowing access). Additionally, all other devices connect and work fine. I have already unplugged everything for an extended period of time. Checked for updates on firmware and verified no software needed to be updated. Rebooted router... Am using wpa-psk and feel i shouldn't have to go weep as it was working fine...

View 3 Replies View Related

Linksys Wireless Router :: WRT110 / Vizio Smart TV - DCHP Connection Not Available

May 15, 2013

I have a WRT110 and a Vizio smart TV - just changed internet providers to NuLink to get a Mbps line - previously had AT&T DSL 1.5 - when tech power cycled router every laptop and smartphone in the house connected with no issue - TV did not connect (it was on during time tech was doing install) - attempted to connect with password, failed to connect multiple times - sometimes message 'DCHP connection not available' message was displayed - called Vizio, 1 hour and 9 minutes of troubleshooting with no success, according to Vizio tech all settings on TV good recommended I contact Lynksys and ask them to ' check 2 ports - port 80 and port 446' - also advise 'connection is autopopulating to 101' - I believe he was referring to the IP address request - router set to WPA2 personal - note that when I first got TV 3 months ago I was able to connect to router no problem, but I do not know if TV had connection the day we switched internet providers.  I do have 2 fixed IP addresses entered an one of them ends in '101' - I do not know if that is significant or not.  The main reason for the internet switch was to get the TV online, disappointed that I could not get it done. 

View 3 Replies View Related

Linksys Wireless Router :: E1000 - Unable To Hook Up Vizio Dvd Player To Wifi?

Jan 28, 2012

I am unable to get this to hook up my vizio dvd player to wifi

View 2 Replies View Related

Vizio TV Sees Wireless But Won't Connect?

May 2, 2012

Have a Vizio tv that can see the wireless - NetGear router. The internet service is through HughesNet. Laptop, iPhone, and iPad have no issues connecting to wireless.

View 1 Replies View Related

Cisco Wireless - Vizio Player Router Setup?

Jan 2, 2013

How do I setup Vizio blue ray with Cisco wireless router

View 1 Replies View Related

Sync The Vizio Wireless TV To The Ubee Router?

Feb 16, 2013

I am trying to sync the vizio wireless tv to the router. I need the security code for the ubee router?

View 1 Replies View Related

WD HDD USB Connection To Vizio Router

Aug 29, 2012

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit
Processor: Pentium(R) Dual-Core CPU E5300 @ 2.60GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 6109 Mb
Graphics Card: Intel(R) G45/G43 Express Chipset, -1265 Mb
Hard Drives: C: Total - 938406 MB, Free - 547304 MB; E: Total - 238414 MB, Free - 189947 MB;
Motherboard: Gateway, EG43M
Antivirus: Microsoft Security Essentials, Updated and Enabled

1. using Vizioxwr100 router

2. have a WD2500JB HDD (USB)

3. when HDD connected directly to pc, it can be accessed.

4. when HDD connected to router, router identifies it as WD HDD ON status PAGE...but

5. PC CANNOT see it in Win Explorer

the WD HDD is my network storage unit.

View 7 Replies View Related

Setup To Use External USB HD Connected To Vizio Xwr100 Router?

Sep 4, 2012

How do I setup to use an external USB HD (as NSD) connected to Vizio xwr100 router. Vizio thinks it is a media device and makes no connection which can be found with Win Explorer

View 1 Replies View Related

Vizio TV No Longer Finds Wireless Access Points?

Feb 19, 2012

my Vizio TV (VF552XVT) can no longer find any wireless access points even after inputting SSID or IP information. Other wireless devices (my phone) are able to connect wirelessly. Everything was working fine until a power outage about 3 days ago.

View 2 Replies View Related

Linksys Wireless Router :: Cannot Connect Computer To Cisco Connect - EA3500

Jul 29, 2012

Can not connect computer to Cisco Connect -.Receive error msg 82BD0305. Reset to EA3500 to default and reinstalled software.

View 8 Replies View Related

Linksys Wireless Router :: E1500 - Can't Connect To Cisco Connect

Feb 24, 2013

I have a wireless Linksys E1500 router, and for quite a few months now, my router just stopped working properly. It quit, I unplugged everything and plugged it back in, and it worked, but from that point on, it's been displaying this:
 
I've tried changing the Ethernet cables

View 1 Replies View Related

Linksys Wireless Router :: Can't Connect To 192.168.1.1 Or Cisco Connect

Feb 25, 2011

I just bought the e1000 router today and I'm already having trouble. I got it setup the first time and all my computers set up with it and it works fine for internet. Everything is snappy and responsive and I don't have any of the problems I did with my old belkin. However, I am unable to connect to the router using cisco connect or the web interface. I need to forward ports, configure wireless security, etc etc. All I did was disable the guest account through cisco connect, and then when the software just sat there doing nothing with the spinning circle in the middle, I opened task manager and killed the process to get it to go away. Now I can't connect using either cisco connect or the web interface.

View 7 Replies View Related

Linksys Wireless Router :: E1200 When Run Cisco Connect After Couple Minutes Searching / Can't Find Router

Mar 9, 2012

I want to use cisco connect with the Router E1200. There is a wireless connection between laptop and E1200 Router. When I run the "Cisco Connect" after couple minutes searching It can not find the Router and I have to put an (Router name SSID) and password.

View 9 Replies View Related

Linksys Wireless Router :: WRT54GS - Connect Broadband Router To New Win Xp Install

Jan 17, 2012

I have a WRT54GS which works fine with Linux both from both wired and wireless computers using Linux. But I reinstalled Win XP and now I can't reestablish a connection following the EasyLink advisor. I did have a connection under Win XP before.
 
The last instruction on the Easylink advisor tells me to look for something marked "local"  I don't  find that word on the screen.

View 2 Replies View Related

Linksys Wireless Router :: E3000 - Can't Connect To Router Settings Page

Dec 25, 2012

When I try to go to192.168.1.1 it says connection interrupted.  If i use the Cisco Connect it tells me i am not connected to the internet.  My pc is connected via ethernet cable. My son can pull it up on is laptop and is connect the our Linksys E3000 wirelessly.  I can go online, I just cant get to the router.  

View 9 Replies View Related

Linksys Wireless Router :: EA2700 Will Loose Ability To Connect To Router

Nov 19, 2012

If I update my firmware on my EA2700 router to be able to use the Cloud, will I loose the ability to connect to my router on 192.168.1.1 ?  If this is so, why couldn't linksys let you use both Cloud and 192.168.1.1 in their latest firmware?

View 3 Replies View Related

Linksys Wireless Router :: E3200 Router Can't Connect To Internet

Mar 20, 2013

I bought a Cisco-Linksys E3200 8 months ago and it worked well until last month. I usually power down the router after midnight & power up in the morning and evevry time it can connect to internet through DSL modem without problem until this Feb. Most of the time after powering up the router it just can't connect to internet anymore. I am sure the AT&T DSL modem is working. I have to reboot/reset the router & DSL modem several time to get router to connect to internet again. The order of resetting/rebooting DSL modem & E3200 router seems to make no difference. It just appears suddenly the router can connect to internet by chance. I changed router IP and it didn't work either. It's really annoying becuase I have to spend 10~40 minutes to resetting/rebooting DSL modem & router to get internet connection every day. 

View 9 Replies View Related

Wireless :: Can't Connect To Linksys Router 192.168.1.1

Feb 6, 2011

I am trying to set up a wireless repeater at home and it requires that I get configuration settings from my wireless router.However I can't access the router configuration screen.The router is a Linksys WRT54G.I am trying to access it using the IP address 192.168.1.1.I keep getting an error that says the page cannot be accessed.

-I have tried using both my a wireless and wired connection to the router. I confirmed the internet connection before attempting this.
-I have tried using internet explorer and Firefox
-Some posts on this site suggested trying 192.168.2.1, and 172.16.106.1, neither worked (they timed out)
-I typed ipconfig and into the cmd prompt and found that 192.168.1.1 IS my default gateway
-I tried adding the "s" (https://192.168.1.1) and got a username and password prompt.I do not believe I ever set up a username and password for my router.

View 4 Replies View Related

Linksys - Cannot Connect Through Wireless Router?

May 20, 2012

Have two laptops in home, one can connect thru Linksys router while the other cannot, why??

View 3 Replies View Related

Use Linksys Router To Connect Tv For Wireless?

Dec 26, 2011

I have wireless but need a directive connection kit to watch movies.can I use a linsksy router? If so what else do I need since the word "kit"

View 3 Replies View Related

Cisco Linksys Unable To Connect To Wireless Router

Mar 3, 2011

I have a Cisco Linksys router that I have been using for about 6 weeks just fine with Windows Vista on an Acer Laptop. We had some power outages (about 3, less than 30mins each) and the internet was down for nearly 48 hours early this week. Now that it is up, I was able to connect to my router for a few hours. When I shut my laptop off and about 2 hours later tried to access the web again, I found that I couldn't unless I hardwired from the modem.I've done the windows repair network connection and the Cisco Network Magic fix- (It says things like flushing DNS cache while doing its thing). Both say my network key is wrong. No one else in the house could have changed it, I was the only one home.I've power cycled both the router and modem. I've turned my laptop off and rebooted. I used the manufacturers settings to try to go in and see what happened. I can't type the router's direct IP and get into like it says I should in Firefox.

The one thing I've noticed is that prior to the outage- my router had a "name" that I named it, while now it's back to linksys_numbers_letters. However, I was still able to connect after the outage at the beginning.

View 2 Replies View Related

Linksys Wireless Router :: Cannot Connect To Cisco WRT54GH

Oct 8, 2011

I don't know how to access the router now to reset my system.  My wired computer works fine.  I have used this router without issue for several years. I used windows Xp and now I installed windows 7. After that i cannot connect to the router. I tried with 192.168.1.1 in my browser and with the setup CD. I just cant enter to setup the router. On the other computer the internet is functioning perfectly. I use the same cable, so the problem is not in the cables.

View 4 Replies View Related

Linksys Wireless Router :: Use Cisco Connect Or Web For New Set Up Of E4200?

Jul 26, 2011

1. I will be getting a e4200 on Thursday and was wondering if there is any advantage/disadvantage to using the Cisco Connect or just following instructions for manual setup using the web (I did it that way on my last router 6 years ago but was just following a script).?

2. Can I change things using the web after setting up using Cisco Connect or do I have to always use it:?

3. Finally after I set the router up can I just set up  other computers in the house as I do  now (just plug them in using wire or search for wireless and put  in password)?

View 7 Replies View Related

Linksys Wireless Router :: How To Connect Two Cisco WRT610N

Dec 28, 2011

I want to connect one "wrt610n router" to modem directly through Ethernet cable and when i connect both of them every thing is working fine and iit gives proper internet connection through WLAN [code] But, when i tried to connect "second WRT610N router" through "first one WRT610N router" through LAN_cable(cat 5) then second router do'nt provide(give) internet connection second router ip-- 192.168.1.5

View 4 Replies View Related

Linksys Wireless Router :: Wrt120n Router Won't Connect Ps3?

Jul 5, 2011

My wrt120n router wont connect my ps3, it was working fine, now it dosnt send out a signal, but my computer is wired and works fine. I tried reseting it and leaveing it and the modem unplugged for awhile but didnt work.

View 1 Replies View Related

Linksys WRT Router - Wireless Not Able To Connect Second Computer

Feb 11, 2012

I am using LINKSYS WRT54GS2 Router. Mostly I use it for connection via Wireless. I am able to connIect to it via WIRELESS more than one Laptop running Win XP and and tablets.I wanted to connect one more laptop with WINDOWS 7 OS to this network. I was able to connect via wireless this laptop ( win 7) , but the other one with xp gets disconnected.

View 1 Replies View Related

WPA Key For Linksys Wireless Router To Connect PS3 To Internet?

Nov 4, 2011

finding my wpa key for my linksys wireless router to connect my PS3 to internet.

View 1 Replies View Related

Connect Wireless Linksys Router To Vonage?

Mar 24, 2011

Just got vonage phone service and a new laptop... what type of wireless router can I use this my existing service cable modem>vonage.

View 1 Replies View Related

Linksys Wireless Router :: Cannot Connect To E1000

Mar 26, 2012

I own a E1000 router that I use with several wireless machines. Unfortunately, I cannot connect to the configuration of the router by typing url...in a browser, be it wireless or weirdly. For example, Firefox displays "Connection has been reinitialized". Furthermore, when I launch Cisco Connect, it only shows the error "Unable to connect to router". I tried to switch my router off and on, but that doesn't work. Totally resetting the router solves the problem, but not definitely.Is there a solution that does not require resetting my router?

View 2 Replies View Related

Linksys Wireless Router :: WRT610N Isn't Able To Connect At All

Dec 25, 2009

I purchased a WRT610N router early this month, the wireless network was working completely fine when I first set it up. Today I tried to connect my laptop to my wireless network. The laptop isn't able to connect at all. I also got a Sony PSP which has WLAN on and that saying it cannot detect any access point which would be my router.

View 3 Replies View Related

Linksys Wireless Router :: E3200 - Connect USB Hub?

Oct 18, 2011

I just ordered the E3200. It's suppose to ship today. I know it comes with 1 USB port for hard drives. Is it possible to connect a USB hub to the router so that I can connect more than 1 hard drive?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved