Linksys Wireless Router :: Cannot Connect To Cisco WRT54GH
Oct 8, 2011
I don't know how to access the router now to reset my system. My wired computer works fine. I have used this router without issue for several years. I used windows Xp and now I installed windows 7. After that i cannot connect to the router. I tried with 192.168.1.1 in my browser and with the setup CD. I just cant enter to setup the router. On the other computer the internet is functioning perfectly. I use the same cable, so the problem is not in the cables.
View 4 Replies
ADVERTISEMENT
Jul 23, 2012
I have a linksys WRT54GH wireless router running firmware v1.0.01 build 001.It's setup with DHCP.My desktop computer is connected to the router via cable.I also access the connection using my laptop, via wireless.The problem is that after I start using the desktop (wired connection), I can't connect from the laptop using wireless. It happens every time. I then turn the router off and back on again. After this procedure I can successfully connect from both the desktop (wired) and laptop (wireless).
View 6 Replies
View Related
Nov 4, 2011
Firmware version is V1.0.01 b001 my WRT54GH has recently started to shuts off periodicaly without any reason. Will stay off for couple of minutes, then will turn ON again. In this period, On/OFF button has no effect.
View 4 Replies
View Related
Aug 12, 2011
I need to set the local IP for my new wrt54gh wireless router to 172.28.2.x & netmask to 255.255.0.0 but there is no option to set the netmask to 255.255.0.0 in the drop down menu / list .
View 5 Replies
View Related
Oct 27, 2011
1st time use cisco router.Where to check the list of user connecting to the router?
View 6 Replies
View Related
Sep 16, 2011
have problem with WRT54GH, almost every second page after reload gets an error message: Error 101 (net::ERR_CONNECTION_RESET): The connection was reset. Tried both on IE, Firefox, Chrome Tried to disable antivirus, no effect, the pages still load not all the time, firmware upgraded to the latest version. Before didi not have such problem with Zyxel W330EE.
View 4 Replies
View Related
Nov 16, 2010
I'm not able to logon to WRT54GH-SG over 192.168.1.1. I'm using correct password & have NOT forgotten. I'm hitting 401 page. The support rep told me reset the router which I do not want to before I explore any possibilities.
View 8 Replies
View Related
Feb 18, 2012
I have linksys WRT54GH wireless router with me.I want to know how can i connect it with any other wireless router. What settings do i need to change.
View 1 Replies
View Related
Mar 29, 2012
I've updated latest firmware & installed 5 pieces of WRT54GH at our building. Then I noticed each of them disappear from wireless connections list and IP scan list (no ping response). If they might not response to pings but they serve as switch without any problem, I mean there are no wired connection problems, they work as switch all the time. The problems are -again-
1-) Wireless lost and / or 2-) Ping response lost
Turning them off and on again will fix them. But I'm tired of bosses who complain about their faulty pc connectivity.
Don't they run 7/24? I tried to restart them on every 12 hours programmatically/remotely but it couldn't work.
View 1 Replies
View Related
Aug 31, 2010
Ive been using this router for about 4 months now. suddenly it wont let me connect wirelessly through itouch nor through imac. it says Unable to join the network "linksys" eventhough "linksys" is indicated to be an available WIFI network and that signal is full. Problem is still the same even after i reset the router a couple of times pass 30seconds, set the security to No Password.if i connect the router with a cable it connects seamlessly and allows me to go online.
View 8 Replies
View Related
Jul 9, 2011
I purchased WRT54GH wireless router back in 2009 and it was working fine except for past 1 month, wherein the Internet Connection was being disrupted 15 - 20 times in an hour. I thought it could be fault from ISP end; however after investigation by ISP we found the fault was not from ISP as, when Wireless was unable to establish connection with the DSL Modem it was failing but when tried to connect laptop with the DSL Modem it worked fine (Wired connection). I did try the Settings mentioned in an earlier post to change the UPnP and the Beacon Interval etc. This however doesnot seem to work as the internet has been disconnected almost thrice since then. (Approx. 15 - 20 mins). When the router is unable to connect to internet I restart the Wireless Router and the DSL Modem. After restarting, the Internet connectivity works fine.
Below are the Advanced Wireless Settings from Wireless Tab:
Authentication Type: Auto Shared (Default: Auto)
Basic Rate: Default (Default: Default)
Transmission Rate Auto (Default: Auto)
CTS Protection Mode: Disabled Auto (Default: Auto)
--------------------------------------------------------------------------------
Beacon Interval: (Default: 100 Msec, Range: 20 ~ 1000)
DTIM Interval: (Default: 1, Range: 1 ~ 255)
Fragmentation Threshold: (Default: 2346, Range: 256 ~ 2346)
RTS Threshold: (Default: 2347, Range: 0 ~ 2347)
View 2 Replies
View Related
Nov 20, 2010
I just bought WRT54GH router. I have one PC (running Ubuntu) connected via Wireless.Every 5-10 minutes I get disconnected for a short period of time (about 10-30 seconds). During that period I am able to access router configuration page, but can't connect to the "outer" world... Surely it's not about my Internet provider, since connecting the PC directly to the Internet cable works fine with no "disconnections".
View 9 Replies
View Related
Aug 6, 2012
My router (WRT54GH) doesnt seem to be enabling the wi-fi network. Non of my devices are able to detect the wireless network.
View 1 Replies
View Related
Sep 19, 2012
I was using a wrt54gh which is no longer in working condition.. so i bought an E1200.the problem i face is when i try to restore my new router which is the E1200 frm the backup file frm my previous router the wrt54gh which is saved in my computer i get the error message " THE IMAGE FILE IS INCORRECT ".
View 4 Replies
View Related
Aug 6, 2012
My router (WRT54GH) doesn't seem to be enabling the wi-fi network. Non of my devices are able to detect the wireless network.
View 3 Replies
View Related
Jul 14, 2011
I'm interested how to enable or use the "SpeedBurst" option on Linksys WRT54GH router?
View 1 Replies
View Related
Nov 22, 2012
Anyone has a register of problems between a router WRT54GH and A495 telefone of Siemens?I mean they can be working in the same frequency, that´s why in some rooms I can connect my wireless network very well.
View 1 Replies
View Related
Sep 13, 2012
i am a using a WRT54GH linksys router.. which was working fine for a year.. there was thunderstorm and lightning a few days back.. since then my routers internet port (the first port which says internet in yellow) has stopped working..
View 5 Replies
View Related
Jul 10, 2011
I just installed WRT54GH and wireless was working fine, after almost 3 hours passed I lost connection with it.I tried to connect using wireless with 3 different notebooks without success. Just using cable it works.I upgraded firmware from v1.0.010 to v1.0.01 but still not working.
View 7 Replies
View Related
Oct 7, 2011
I have a WRT54gh, and the signal strength is extremely poor. Full strength at about 15 centimeters, Then drops to 50% at 50 centimeters. By 1.5 meters, the signal is extremely weak or not visible. Have updated to the latest firmware, factory reset and power cycled. There are no other wireless networks or devices that would provide interference Have experimented with channels, thresholds, transmit type, encrypted/open, intervals etc..No luck. Due to signal dropping off so quickly it seems like a transmit strength issue rather than an issue that can be solved in the menu. I'm wondering if there's a way I can console log-in to the Linux kernel and check the transmit strength and perhaps bump it up by a few DB? It's out of warranty so a solution involving opening the case is also acceptable.
View 9 Replies
View Related
Jul 29, 2012
Can not connect computer to Cisco Connect -.Receive error msg 82BD0305. Reset to EA3500 to default and reinstalled software.
View 8 Replies
View Related
Feb 24, 2013
I have a wireless Linksys E1500 router, and for quite a few months now, my router just stopped working properly. It quit, I unplugged everything and plugged it back in, and it worked, but from that point on, it's been displaying this:
I've tried changing the Ethernet cables
View 1 Replies
View Related
Feb 25, 2011
I just bought the e1000 router today and I'm already having trouble. I got it setup the first time and all my computers set up with it and it works fine for internet. Everything is snappy and responsive and I don't have any of the problems I did with my old belkin. However, I am unable to connect to the router using cisco connect or the web interface. I need to forward ports, configure wireless security, etc etc. All I did was disable the guest account through cisco connect, and then when the software just sat there doing nothing with the spinning circle in the middle, I opened task manager and killed the process to get it to go away. Now I can't connect using either cisco connect or the web interface.
View 7 Replies
View Related
Mar 9, 2012
I want to use cisco connect with the Router E1200. There is a wireless connection between laptop and E1200 Router. When I run the "Cisco Connect" after couple minutes searching It can not find the Router and I have to put an (Router name SSID) and password.
View 9 Replies
View Related
Jan 17, 2012
I have a WRT54GS which works fine with Linux both from both wired and wireless computers using Linux. But I reinstalled Win XP and now I can't reestablish a connection following the EasyLink advisor. I did have a connection under Win XP before.
The last instruction on the Easylink advisor tells me to look for something marked "local" I don't find that word on the screen.
View 2 Replies
View Related
Dec 25, 2012
When I try to go to192.168.1.1 it says connection interrupted. If i use the Cisco Connect it tells me i am not connected to the internet. My pc is connected via ethernet cable. My son can pull it up on is laptop and is connect the our Linksys E3000 wirelessly. I can go online, I just cant get to the router.
View 9 Replies
View Related
Nov 19, 2012
If I update my firmware on my EA2700 router to be able to use the Cloud, will I loose the ability to connect to my router on 192.168.1.1 ? If this is so, why couldn't linksys let you use both Cloud and 192.168.1.1 in their latest firmware?
View 3 Replies
View Related
Mar 20, 2013
I bought a Cisco-Linksys E3200 8 months ago and it worked well until last month. I usually power down the router after midnight & power up in the morning and evevry time it can connect to internet through DSL modem without problem until this Feb. Most of the time after powering up the router it just can't connect to internet anymore. I am sure the AT&T DSL modem is working. I have to reboot/reset the router & DSL modem several time to get router to connect to internet again. The order of resetting/rebooting DSL modem & E3200 router seems to make no difference. It just appears suddenly the router can connect to internet by chance. I changed router IP and it didn't work either. It's really annoying becuase I have to spend 10~40 minutes to resetting/rebooting DSL modem & router to get internet connection every day.
View 9 Replies
View Related
Feb 6, 2011
I am trying to set up a wireless repeater at home and it requires that I get configuration settings from my wireless router.However I can't access the router configuration screen.The router is a Linksys WRT54G.I am trying to access it using the IP address 192.168.1.1.I keep getting an error that says the page cannot be accessed.
-I have tried using both my a wireless and wired connection to the router. I confirmed the internet connection before attempting this.
-I have tried using internet explorer and Firefox
-Some posts on this site suggested trying 192.168.2.1, and 172.16.106.1, neither worked (they timed out)
-I typed ipconfig and into the cmd prompt and found that 192.168.1.1 IS my default gateway
-I tried adding the "s" (https://192.168.1.1) and got a username and password prompt.I do not believe I ever set up a username and password for my router.
View 4 Replies
View Related
May 20, 2012
Have two laptops in home, one can connect thru Linksys router while the other cannot, why??
View 3 Replies
View Related
Dec 26, 2011
I have wireless but need a directive connection kit to watch movies.can I use a linsksy router? If so what else do I need since the word "kit"
View 3 Replies
View Related
Mar 3, 2011
I have a Cisco Linksys router that I have been using for about 6 weeks just fine with Windows Vista on an Acer Laptop. We had some power outages (about 3, less than 30mins each) and the internet was down for nearly 48 hours early this week. Now that it is up, I was able to connect to my router for a few hours. When I shut my laptop off and about 2 hours later tried to access the web again, I found that I couldn't unless I hardwired from the modem.I've done the windows repair network connection and the Cisco Network Magic fix- (It says things like flushing DNS cache while doing its thing). Both say my network key is wrong. No one else in the house could have changed it, I was the only one home.I've power cycled both the router and modem. I've turned my laptop off and rebooted. I used the manufacturers settings to try to go in and see what happened. I can't type the router's direct IP and get into like it says I should in Firefox.
The one thing I've noticed is that prior to the outage- my router had a "name" that I named it, while now it's back to linksys_numbers_letters. However, I was still able to connect after the outage at the beginning.
View 2 Replies
View Related
Jul 26, 2011
1. I will be getting a e4200 on Thursday and was wondering if there is any advantage/disadvantage to using the Cisco Connect or just following instructions for manual setup using the web (I did it that way on my last router 6 years ago but was just following a script).?
2. Can I change things using the web after setting up using Cisco Connect or do I have to always use it:?
3. Finally after I set the router up can I just set up other computers in the house as I do now (just plug them in using wire or search for wireless and put in password)?
View 7 Replies
View Related
