Linksys Wireless Router :: Wrt54gh Not Enabling Wifi Network?

Aug 6, 2012

My router (WRT54GH) doesnt seem to be enabling the wi-fi network. Non of my devices are able to detect the wireless network.

View 1 Replies


ADVERTISEMENT

Linksys Wireless Router :: Wrt54gh Doesn't Enable Wifi Network

Aug 6, 2012

My router (WRT54GH) doesn't seem to be enabling the wi-fi network. Non of my devices are able to detect the wireless network.

View 3 Replies View Related

Linksys Wireless Router :: WRT54GH - Unable To Join The Network?

Aug 31, 2010

Ive been using this router for about 4 months now. suddenly it wont let me connect wirelessly through itouch nor through imac. it says Unable to join the network "linksys" eventhough "linksys" is indicated to be an available WIFI network and that signal is full. Problem is still the same even after i reset the router a couple of times pass 30seconds, set the security to No Password.if i connect the router with a cable it connects seamlessly and allows me to go online.

View 8 Replies View Related

Linksys Wireless Router :: Cannot Connect To Cisco WRT54GH

Oct 8, 2011

I don't know how to access the router now to reset my system.  My wired computer works fine.  I have used this router without issue for several years. I used windows Xp and now I installed windows 7. After that i cannot connect to the router. I tried with 192.168.1.1 in my browser and with the setup CD. I just cant enter to setup the router. On the other computer the internet is functioning perfectly. I use the same cable, so the problem is not in the cables.

View 4 Replies View Related

Linksys Wireless Router :: WRT54GH Shuts Off Periodically?

Nov 4, 2011

Firmware version is V1.0.01 b001 my WRT54GH has recently started to shuts off periodicaly without any reason. Will stay off for couple of minutes, then will turn ON again. In this period, On/OFF button has no effect.

View 4 Replies View Related

Linksys Wireless Router :: Setting Wrt54gh Netmask To 255.255.0.0?

Aug 12, 2011

I need to set the local IP for my new wrt54gh wireless router to 172.28.2.x  & netmask to 255.255.0.0 but there is no option to set the netmask to 255.255.0.0 in the drop down menu / list .

View 5 Replies View Related

Linksys Wireless Router :: WRT54GH How To Check All User

Oct 27, 2011

1st time use cisco router.Where to check the list of user connecting to the router?

View 6 Replies View Related

Linksys Wireless Router :: WRT54GH Does Not Load Pages?

Sep 16, 2011

have problem with WRT54GH, almost every second page after reload gets an error message: Error 101 (net::ERR_CONNECTION_RESET): The connection was reset. Tried both on IE, Firefox, Chrome Tried to disable antivirus, no effect, the pages still load not all the time, firmware upgraded to the latest version. Before didi not have such problem with Zyxel W330EE.

View 4 Replies View Related

Linksys Wireless Router :: WRT54GH-SG Not Allowing To Logon

Nov 16, 2010

I'm not able to logon to WRT54GH-SG over 192.168.1.1. I'm using correct password & have NOT forgotten. I'm hitting 401 page. The support rep told me reset the router which I do not want to before I explore any possibilities.

View 8 Replies View Related

Linksys Wireless Router :: Settings For Connecting WRT54GH With Another One?

Feb 18, 2012

I have linksys WRT54GH wireless router with me.I want to know how can i connect it with any other wireless router. What settings do i need to change.

View 1 Replies View Related

Linksys Wireless Router :: WRT54GH No Ping Response After A While?

Mar 29, 2012

I've updated latest firmware & installed 5 pieces of WRT54GH at our building. Then I noticed each of them disappear from wireless connections list and IP scan list (no ping response). If they might not response to pings but they serve as switch without any problem, I mean there are no wired connection problems, they work as switch all the time. The problems are -again-
 
1-) Wireless lost   and / or 2-) Ping response lost
 
Turning them off and on again will fix them. But I'm tired of bosses who complain about their faulty pc connectivity.
 
Don't they run 7/24? I tried to restart them on every 12 hours programmatically/remotely but it couldn't work.

View 1 Replies View Related

Linksys Wireless Router :: WRT54GH - Can't Connect From Laptop Wirelessly?

Jul 23, 2012

I have a linksys WRT54GH wireless router running firmware v1.0.01 build 001.It's setup with DHCP.My desktop computer is connected to the router via cable.I also access the connection using my laptop, via wireless.The problem is that after I start using the desktop (wired connection), I can't connect from the laptop using wireless. It happens every time. I then turn the router off and back on again. After this procedure I can successfully connect from both the desktop (wired) and laptop (wireless).

View 6 Replies View Related

Linksys Wireless Router :: WRT54GH Frequent Disconnection With DSL Modem

Jul 9, 2011

I purchased WRT54GH wireless router back in 2009 and it was working fine except for past 1 month, wherein the Internet Connection was being disrupted 15 - 20 times in an hour. I thought it could be fault from ISP end; however after investigation by ISP we found the fault was not from ISP as, when Wireless was unable to establish connection with the DSL Modem it was failing but when tried to connect laptop with the DSL Modem it worked fine (Wired connection). I did try the Settings mentioned in an earlier post to change the UPnP and the Beacon Interval etc. This however doesnot seem to work as the internet has been disconnected almost thrice since then. (Approx. 15 - 20 mins). When the router is unable to connect to internet I restart the Wireless Router and the DSL Modem. After restarting, the Internet connectivity works fine.
 
Below are the Advanced Wireless Settings from Wireless Tab:
 
Authentication Type: Auto Shared (Default: Auto)
Basic Rate: Default (Default: Default)
Transmission Rate Auto (Default: Auto)
CTS Protection Mode: Disabled Auto (Default: Auto)
--------------------------------------------------------------------------------
Beacon Interval: (Default: 100 Msec, Range: 20 ~ 1000)
DTIM Interval: (Default: 1, Range: 1 ~ 255)
Fragmentation Threshold: (Default: 2346, Range: 256 ~ 2346)
RTS Threshold: (Default: 2347, Range: 0 ~ 2347)

View 2 Replies View Related

Linksys Wireless Router :: WRT54GH Disconnects About 10-12 Times Per Hour

Nov 20, 2010

I just bought WRT54GH router. I have one PC (running Ubuntu) connected via Wireless.Every 5-10 minutes I get disconnected for a short period of time (about 10-30 seconds). During that period I am able to access router configuration page, but can't connect to the "outer" world... Surely it's not about my Internet provider, since connecting the PC directly to the Internet cable works fine with no "disconnections".

View 9 Replies View Related

Linksys Wireless Router :: Wrt54gh - The Image File Is Incorrect

Sep 19, 2012

I was using a wrt54gh which is no longer in working condition.. so i bought an E1200.the problem i face is when i try to restore my new router which is the E1200 frm the backup file frm my previous router the wrt54gh which is saved in my computer  i get the error message " THE IMAGE FILE IS INCORRECT ".

View 4 Replies View Related

Enabling Wifi On Pk5000 While Connected To Different Network?

Jan 25, 2012

I have the pk5000 router but the wifi is off. I am connected to another network so is it possible to somehow access my router to enable the wifi?

View 3 Replies View Related

Linksys Wireless Router :: How To Enable Or Use Speed-Burst Option On WRT54GH

Jul 14, 2011

I'm interested how to enable or use the "SpeedBurst" option on Linksys WRT54GH router?

View 1 Replies View Related

Linksys Wireless Router :: WRT54GH / Siemens A495 - Working In Same Frequency

Nov 22, 2012

Anyone has a register of problems between a router WRT54GH and A495 telefone of Siemens?I mean they can be working in the same frequency, that´s why in some rooms I can connect my wireless network very well.

View 1 Replies View Related

Linksys Wireless Router :: WRT54GH Internet Port Has Stopped Working

Sep 13, 2012

i am a using a WRT54GH linksys router.. which was working fine for a year.. there was thunderstorm and lightning a few days back.. since then my routers internet port (the first port which says internet in yellow) has stopped working..

View 5 Replies View Related

Linksys Wireless Router :: WRT54GH Connecting Wirelessly With 3 Different Notebooks Without Success

Jul 10, 2011

I just installed WRT54GH and wireless was working fine, after almost 3 hours passed I lost connection with it.I tried to connect using wireless with 3 different notebooks without success. Just using cable it works.I upgraded firmware from v1.0.010 to v1.0.01 but still not working.

View 7 Replies View Related

Linksys Wireless Router :: WRT54GH Signal Strength Is Extremely Poor?

Oct 7, 2011

I have a WRT54gh, and the signal strength is extremely poor. Full strength at about 15 centimeters, Then drops to 50% at 50 centimeters. By 1.5 meters, the signal is extremely weak or not visible. Have updated to the latest firmware, factory reset and power cycled. There are no other wireless networks or devices that would provide interference Have experimented with channels, thresholds, transmit type, encrypted/open, intervals etc..No luck. Due to signal dropping off so quickly it seems like a transmit strength issue rather than an issue that can be solved in the menu. I'm wondering if there's a way I can console log-in to the Linux kernel and check the transmit strength and perhaps bump it up by a few DB? It's out of warranty so a solution involving opening the case is also acceptable.

View 9 Replies View Related

Linksys Wireless Router :: WRT54GS Won't Allow Enabling Encryption

Dec 22, 2011

Factory default settings of my WRT54GS encryption are Disabled. When I try to enable WPA Personal encryption (>Wireless, Wireless Security), it reverts back to Disabled as soon as I make the selection. >Administration, >Wireless, >Encryption Function is Disabled.When I had this router set up at another location with another ISP, this was never an issue. How do I get the encryption function to be enabled?

View 4 Replies View Related

Wireless :: Wifi Not Enabling On Hp Pavilion Laptop

Apr 20, 2013

on my laptop hp pavillion g 7 series is not enabling wifi button it stays orange and i trouble shoot

View 1 Replies View Related

Linksys Wireless Router :: E3200 Error 501 After Enabling Access Via HTTPS Option

Mar 8, 2012

When accessing the E3200 router using then ERROR 501.Not Implemented.That method is not implemented. The error occured after enabling the "Local Management Access, Access via: HTTPS" option on the Administration > Management tab.I tried different browsers FireFox (version 10), Internet Explorer (version 8,9), the same error was displayed and no acces granted to the E3200 router. I reseted the router and tried the latest firmware 1.0.03 build 9 Feb 1, 2012, but after enablib the option the issue occured again and it is not possible to connect to the router.

View 9 Replies View Related

Linksys Wireless Router :: EA4500 Losing Internet Access When Enabling Port Forwarding Method

Jul 30, 2012

This is my second post today trying to fix the NAT types for my 2 xbox 360. I tried the port forwarding method but with this router when I enable the ports I lost internet access in my wired devices but my wireless devices still have internet access. I even lost internet access on my computer. I never had manu problems with a router trying to get my NAT type open on my 2 xbox.

View 6 Replies View Related

Linksys Wireless Router :: E2500 - Set Up Wifi Network

Feb 25, 2013

I have the following equipment
E2500 wireless N router (2 of these)
WRT54g router (B/G)
WAP54g access point (B/G)

I am planning to set up a Wi-Fi network for a single story motel. It is C-shaped; about 300 feet along the longest side with "legs" of 120 and 70 feet.Until now I have only used that single WRT54g in the office for the entire property and it covers about half the property (left side.) My plan starts in the office (bottom left) with a WRT54g connected to the DSL modem as it always was. That would be connected to one of the E2500s in the middle so it can cover the most area. From there two others would shoot out to each corner (the other E2500 and the WAP54g). They will all be wired together with Cat 5e "riser cable". The routers will be placed in a wide open attic.
 
1. I have heard that N routers have a range of 150ft in every direction so that's why I'm putting one in the middle. Keep in mind that while the attic is open and wood constructed, the walls between rooms are concrete firewall and they haven't been wi-fi friendly.

2. Does starting with a B/G router at the modem mean the N routers will revert to B/G?

View 9 Replies View Related

Linksys Wireless Router :: Using Wrt300 To Access Another Wifi Network?

Mar 21, 2013

First the situation, Landlord provides a wireless network to us tennants as well as Sat. TV.  So we are not allowed to have cable internet installed and DSL in not available in my area. Due to the positioning of my apt, I can access the 2.4 signal off his router with 2 bars and cannot accessthe 5ghz at all. I even offered to pay for a more powerful router with extended range, but he refused saying he was already familiar with the one he has.   A friend came over with a router with antenna's hooke into his nic card  that was able to get 3 bars on the 5ghz and full 5 bars on the 2.4, by far blowing away the the signal I recieved using USB adaptors and pci cards I had been trying.  In my possession, I have a WRT 300N that  I had picked up as someones birthday gift, then I had to get another gift when they recieved another wireless router.  I kept it  in my possession to hook up NAS and my printer, but would I be able to adapt the wireless portion to recieve signal from the current wireless and connect my computer through it?

View 2 Replies View Related

Linksys Wireless Router :: Wrt54g - Setting Up Wifi Network?

Apr 27, 2013

I have the following equipment
E2500 wireless N router (2 of these)
WRT54g router (B/G)
WAP54g access point (B/G)
 
I am planning to set up a wi-fi network for a single story motel. It is C-shaped; about 300 feet along the longest side with "legs" of 120 and 70 feet. I have included a diagram that I drew for the person that will install it. Until now I have only used that single WRT54g in the office for the entire property and it covers about half the property (left side) but not well and with a dead spot in the top left because of too many walls to go through.
 
My plan starts in the office (bottom left) with a WRT54g connected to the DSL modem as it always was. That would be connected to one of the E2500s in the middle so it can cover the most area. From there two others would shoot out to each corner (the other E2500 and the WAP54g). They will all be wired together with Cat 5e "riser cable". The routers will be placed in a wide open attic.

1. Is this is a good plan for the size of property? I have heard that N routers have a range of 150ft in every direction so that's why I'm putting one in the middle. Keep in mind that while the attic is open and wood constructed, the walls between rooms are concrete firewall and they haven't been wi-fi friendly. Hopefully putting them in the attic takes care of this.

2. Does starting with a B/G router at the modem mean the N routers will revert to B/G?

3. What are the main settings I need to know about? What "mode" does each need to be set to?  Do they need different default gateways?

Can I use the same password/security for all of them? Should I use the same SSID for all?

View 4 Replies View Related

Linksys Wireless Router :: Create Second Wifi Network With Wrt54gl?

Apr 3, 2013

I have DSL with a Comtrend router/wifi (WIFI1).  I would like to connect the WRT54GL to the physical network and have it create a separate wifi network (WIFI2), so my laptop will connect to WIFI2, get passed to the LAN and on to the Internet.  Cant make this work - tried setting up the WRT for DHCP server, DHCP pass through (to the comtrend), and the best I can do is get connected to WIFI2 and have access to the LAN but not the Internet. Ultimately I want to put a high gain antenna on the WRT to make it reach another building about 400' away and do away with comtrends horrible WIFI, but I cant get to first base.

View 3 Replies View Related

Linksys Wireless Router :: Requirements To Use 5.0 Ghz Wifi Network On Ea4500

Aug 26, 2012

My two devices access the 2.4 ghz wireless network fine on my EA4500.Both my devices, laptop and iPhone4, have N rated network cards. What do I need to use the 5.0 ghz wireless network on the EA4500?Can the iPhone4 use a 5.0 wireless network? When I try to add the 5.0 ghz Wi-Fi to my iPhone4, it cannot find the named but hidden SSID network??

View 2 Replies View Related

Linksys Wireless Router :: E3000 - Cannot Connect To Wifi Network

Aug 20, 2011

I have the E3000 router.  I set it up about a month ago and had my laptop and iphones and ipads all hooked up and working great.  About two weeks ago, all of my devices are having problems connecting to the network and if they do connect, it is unstable (slow speeds or constantly dropping from the network).  I know it is not the internet due to the fact that my LAN connection (hardwired) runs great.  I am pulling my hair out trying to figure out why.  I have restored to factory defauls and started over setting it up with no change in performance.   I have the latest drivers on the router and the laptop.  I thought maybe it was vista and my laptop or network card, but the fact that I cannot get my phones or ipads to connect with good performance I am starting to think it is something to do with the router.  Also, just for more info, I am using Chater cable internet.  I am running vista 64x on the laptop. 

View 1 Replies View Related

Linksys Wireless Router :: E4200 How To Set Up Wifi On Business Network

Mar 17, 2013

The task is to share Internet via Wireless router for visitors without any Proxy/Windows Domain authentication.We have:1) Windows based Domain with Active Directory Users, with no DHCP setup, only Static IPs allowed. Used as a DNS server, the IP-address is 192.168.1.1, Domain name, say, Internet Connection via Proxy server which authenticates users via above-mentioned DNS server, the Proxy server IP-address is 192.168.1.3, ruled by MS TMG (ISA server)3) A Wi-Fi Router Cisco E4200.The local area network is wired and works fine. Domain users are happy.The idea is to make visitors happy with a free Internet connection without wiring them into the LAN.So:1) Respected visitors would not have to set up static IP-adresses on their devices to connect to Internet and2) Respected visitors would not have to enter domain credentials to get access to Internet, but3) Network security should not be jeopardized.

View 3 Replies View Related

Linksys Wireless Router :: E4200 Turn Off Wifi Network

Dec 20, 2011

I got a problem with my setup main computer, It work wery god wireless, with very fine speed about 82 mbit in and 24 mbit out. The problem is that it almost dont work at all with cable, even if i turn off the wireless network, the speed is about  2-3 mbit in and about 6-7 mbit outAll other computers, tv. printer wireless work very fine.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved