Linksys Wireless Router :: Wrt54gh Doesn't Enable Wifi Network
Aug 6, 2012My router (WRT54GH) doesn't seem to be enabling the wi-fi network. Non of my devices are able to detect the wireless network.
View 3 Replies
ADVERTISEMENT
Linksys Wireless Router :: Wrt54gh Not Enabling Wifi Network?
Aug 6, 2012My router (WRT54GH) doesnt seem to be enabling the wi-fi network. Non of my devices are able to detect the wireless network.
View 1 Replies View RelatedLinksys Wireless Router :: How To Enable Or Use Speed-Burst Option On WRT54GH
Jul 14, 2011I'm interested how to enable or use the "SpeedBurst" option on Linksys WRT54GH router?
View 1 Replies View RelatedLinksys Wireless Router :: WRT54GH - Unable To Join The Network?
Aug 31, 2010Ive been using this router for about 4 months now. suddenly it wont let me connect wirelessly through itouch nor through imac. it says Unable to join the network "linksys" eventhough "linksys" is indicated to be an available WIFI network and that signal is full. Problem is still the same even after i reset the router a couple of times pass 30seconds, set the security to No Password.if i connect the router with a cable it connects seamlessly and allows me to go online.
View 8 Replies View RelatedLinksys Wireless Router :: Ea6500 Cannot Enable Smart Wifi
Jan 28, 2013I have been trying to enable the Smart WiFi account for my EA6500 router. I have gone online and established a Smart WiFi account but am unable to associate my EA6500 with the account. I downloaded the tool off the Linksys support site but received the following error message:Error code: 0x82BF010CError description: The connected gateway is not a router.Model name: EA6500Model description: unknownSerial number: unknownFirmware version: unknownOperating system: Windows 7 (64-bit) SP 1Software version: 2.0.12332.0Connection type (WAN): unknownIP address (LAN): 192.168.1.254IP address (WAN): unknownComputer IP address: 192.168.1.67? I have DHCP disabled on the EA6500.
View 9 Replies View RelatedLinksys Wireless Router :: Cannot Connect To Cisco WRT54GH
Oct 8, 2011I don't know how to access the router now to reset my system. My wired computer works fine. I have used this router without issue for several years. I used windows Xp and now I installed windows 7. After that i cannot connect to the router. I tried with 192.168.1.1 in my browser and with the setup CD. I just cant enter to setup the router. On the other computer the internet is functioning perfectly. I use the same cable, so the problem is not in the cables.
View 4 Replies View RelatedLinksys Wireless Router :: WRT54GH Shuts Off Periodically?
Nov 4, 2011Firmware version is V1.0.01 b001 my WRT54GH has recently started to shuts off periodicaly without any reason. Will stay off for couple of minutes, then will turn ON again. In this period, On/OFF button has no effect.
View 4 Replies View RelatedLinksys Wireless Router :: Setting Wrt54gh Netmask To 255.255.0.0?
Aug 12, 2011I need to set the local IP for my new wrt54gh wireless router to 172.28.2.x & netmask to 255.255.0.0 but there is no option to set the netmask to 255.255.0.0 in the drop down menu / list .
View 5 Replies View RelatedLinksys Wireless Router :: WRT54GH How To Check All User
Oct 27, 20111st time use cisco router.Where to check the list of user connecting to the router?
View 6 Replies View RelatedLinksys Wireless Router :: WRT54GH Does Not Load Pages?
Sep 16, 2011have problem with WRT54GH, almost every second page after reload gets an error message: Error 101 (net::ERR_CONNECTION_RESET): The connection was reset. Tried both on IE, Firefox, Chrome Tried to disable antivirus, no effect, the pages still load not all the time, firmware upgraded to the latest version. Before didi not have such problem with Zyxel W330EE.
View 4 Replies View RelatedLinksys Wireless Router :: WRT54GH-SG Not Allowing To Logon
Nov 16, 2010I'm not able to logon to WRT54GH-SG over 192.168.1.1. I'm using correct password & have NOT forgotten. I'm hitting 401 page. The support rep told me reset the router which I do not want to before I explore any possibilities.
View 8 Replies View RelatedLinksys Wireless Router :: Settings For Connecting WRT54GH With Another One?
Feb 18, 2012I have linksys WRT54GH wireless router with me.I want to know how can i connect it with any other wireless router. What settings do i need to change.
View 1 Replies View RelatedLinksys Wireless Router :: WRT54GH No Ping Response After A While?
Mar 29, 2012I've updated latest firmware & installed 5 pieces of WRT54GH at our building. Then I noticed each of them disappear from wireless connections list and IP scan list (no ping response). If they might not response to pings but they serve as switch without any problem, I mean there are no wired connection problems, they work as switch all the time. The problems are -again-
1-) Wireless lost and / or 2-) Ping response lost
Turning them off and on again will fix them. But I'm tired of bosses who complain about their faulty pc connectivity.
Don't they run 7/24? I tried to restart them on every 12 hours programmatically/remotely but it couldn't work.
Linksys Wireless Router :: WRT54GH - Can't Connect From Laptop Wirelessly?
Jul 23, 2012I have a linksys WRT54GH wireless router running firmware v1.0.01 build 001.It's setup with DHCP.My desktop computer is connected to the router via cable.I also access the connection using my laptop, via wireless.The problem is that after I start using the desktop (wired connection), I can't connect from the laptop using wireless. It happens every time. I then turn the router off and back on again. After this procedure I can successfully connect from both the desktop (wired) and laptop (wireless).
View 6 Replies View RelatedLinksys Wireless Router :: WRT54GH Frequent Disconnection With DSL Modem
Jul 9, 2011I purchased WRT54GH wireless router back in 2009 and it was working fine except for past 1 month, wherein the Internet Connection was being disrupted 15 - 20 times in an hour. I thought it could be fault from ISP end; however after investigation by ISP we found the fault was not from ISP as, when Wireless was unable to establish connection with the DSL Modem it was failing but when tried to connect laptop with the DSL Modem it worked fine (Wired connection). I did try the Settings mentioned in an earlier post to change the UPnP and the Beacon Interval etc. This however doesnot seem to work as the internet has been disconnected almost thrice since then. (Approx. 15 - 20 mins). When the router is unable to connect to internet I restart the Wireless Router and the DSL Modem. After restarting, the Internet connectivity works fine.
Below are the Advanced Wireless Settings from Wireless Tab:
Authentication Type: Auto Shared (Default: Auto)
Basic Rate: Default (Default: Default)
Transmission Rate Auto (Default: Auto)
CTS Protection Mode: Disabled Auto (Default: Auto)
--------------------------------------------------------------------------------
Beacon Interval: (Default: 100 Msec, Range: 20 ~ 1000)
DTIM Interval: (Default: 1, Range: 1 ~ 255)
Fragmentation Threshold: (Default: 2346, Range: 256 ~ 2346)
RTS Threshold: (Default: 2347, Range: 0 ~ 2347)
Linksys Wireless Router :: WRT54GH Disconnects About 10-12 Times Per Hour
Nov 20, 2010I just bought WRT54GH router. I have one PC (running Ubuntu) connected via Wireless.Every 5-10 minutes I get disconnected for a short period of time (about 10-30 seconds). During that period I am able to access router configuration page, but can't connect to the "outer" world... Surely it's not about my Internet provider, since connecting the PC directly to the Internet cable works fine with no "disconnections".
View 9 Replies View RelatedLinksys Wireless Router :: Wrt54gh - The Image File Is Incorrect
Sep 19, 2012I was using a wrt54gh which is no longer in working condition.. so i bought an E1200.the problem i face is when i try to restore my new router which is the E1200 frm the backup file frm my previous router the wrt54gh which is saved in my computer i get the error message " THE IMAGE FILE IS INCORRECT ".
View 4 Replies View RelatedLinksys Wireless Router :: WRT54GH / Siemens A495 - Working In Same Frequency
Nov 22, 2012Anyone has a register of problems between a router WRT54GH and A495 telefone of Siemens?I mean they can be working in the same frequency, that´s why in some rooms I can connect my wireless network very well.
View 1 Replies View RelatedLinksys Wireless Router :: WRT54GH Internet Port Has Stopped Working
Sep 13, 2012i am a using a WRT54GH linksys router.. which was working fine for a year.. there was thunderstorm and lightning a few days back.. since then my routers internet port (the first port which says internet in yellow) has stopped working..
View 5 Replies View RelatedLinksys Wireless Router :: WRT54GH Connecting Wirelessly With 3 Different Notebooks Without Success
Jul 10, 2011I just installed WRT54GH and wireless was working fine, after almost 3 hours passed I lost connection with it.I tried to connect using wireless with 3 different notebooks without success. Just using cable it works.I upgraded firmware from v1.0.010 to v1.0.01 but still not working.
View 7 Replies View RelatedLinksys Wireless Router :: WRT54GH Signal Strength Is Extremely Poor?
Oct 7, 2011I have a WRT54gh, and the signal strength is extremely poor. Full strength at about 15 centimeters, Then drops to 50% at 50 centimeters. By 1.5 meters, the signal is extremely weak or not visible. Have updated to the latest firmware, factory reset and power cycled. There are no other wireless networks or devices that would provide interference Have experimented with channels, thresholds, transmit type, encrypted/open, intervals etc..No luck. Due to signal dropping off so quickly it seems like a transmit strength issue rather than an issue that can be solved in the menu. I'm wondering if there's a way I can console log-in to the Linux kernel and check the transmit strength and perhaps bump it up by a few DB? It's out of warranty so a solution involving opening the case is also acceptable.
View 9 Replies View RelatedLinksys Wireless Router :: E3200 - Wifi Doesn't Work In Proper Way?
Aug 19, 2012Buy new one Linksys E3200. Two day using and now have such problem. Every 30 minutes WiFi connection disappears for 10-15 sec. Then appear, but you can't connect to WiFi network for next 30 seconds. Update firmware of router to last version, but it doesn't work.
View 3 Replies View RelatedLinksys Wireless Router :: E4200 Wifi Works But Ethernet Doesn't Work?
May 1, 2013I have a E4200 v1, connected with a few PCs by ethernet ports and various devices by wifi. Now the wireless devices work perfectly but sometimes the PC via ethernet ports cannot connect to LAN and internet.
View 2 Replies View RelatedWant To Setup My Linksys Wrt54gl Router To Enable Wifi
Mar 8, 2013I am using 3G to access the internet on my PC. I have a 3G modem connected, and want to setup my Linksys WRT54GL router to enable wi-fi, so other devices can access the internet as well.
View 7 Replies View RelatedInternet Doesn't Work Unless Disable And Enable Again Network
May 30, 2011I start my pc i get 2 local area connections instead of 1 and because of this my internet does not work unless i disable and enable again the network .After enabling only 1 network shows and i can connect to internet.It may be because i replaced my motherboard even tho i uninstalled the drivers?
View 1 Replies View RelatedLinksys Wireless Router :: Enable Network Lock On WRT610N
Jun 24, 2012I have had my WRT610N for several years and I noticed the other day that my network was not locked. I went to task/change wireless connection and clicked on it. The next screen gives me two options: " Wireless Security" or "Network Lock" and under network lock it states "Network Lock: Not enabled". I then click on the enable network lock button and I get the following message "network lock could not be enable." No matter howmany times I do this I get the same message. So, why is Network Majic not letting me lock my network? It has always worked before and just recently did this. I have done a factory reset on my router to see if this could be the problem, but i still get the same message.
View 1 Replies View RelatedLinksys Wireless Router :: E3200 - Network Doesn't Show Up Anymore
Oct 30, 2011I have a linksys E3200. Today I got disconnected and when it reconnected it stated that the network was changed to just network and not my usual network name. I was having connection issues with the network disconnecting me and reconnecting me. I uninstalled the cisco connect software. I contacted support who told me to restart the router and modem, which I did. After reset I tried to reinstall the software. Cisco Connect likes to insist to do the installation wirelessly but my laptop can't find the router during installation to complete it. My router is essentially a glorified wire connecting my computer to my modem now.
View 2 Replies View RelatedLinksys Wireless Router :: E3200 Guest Network Doesn't Work
Aug 19, 2012I have just upgraded my E3200 to firmware: 1.0.04 build 1 Apr 10, 2012.The guest network SSID didn't show before in my access point list, but now I can't even change the settings on the router.The options are greyed out.
View 6 Replies View RelatedLinksys Wireless Router :: E1000 - Doesn't Have Internet Access On Private Network
Jul 17, 2011Why is it that my netbook doesn't have internet access on my Private Network? But when I connect it to my Guest Network, it does have an internet access. It's the only device I have that doesn't have internet access on my Private Network. The rest are working. I tried all the possible options to connect a device but still the problem exist.
By the way, I'm using E-1000 v2.1.02
Linksys Wireless Router :: WRK54G - Network Connection Doesn't Have Valid IP Configuration
Dec 2, 2010I have a new Windows 7 laptop which cannot connect to internet through my WRK54G Linksys router. Other laptops can connect through the same router, and the same laptop has connected through other routers. The laptop has it's TCP/IPv6 and TCP/IPv4 internet protocols set to get addresses automaticaly.
ipconfig shows that the IPv6 autoconfiguration address is 169.254.28.183 instead of 192.168.1.XXX. I tried the ipconfig/release and ipconfig/renew commands, as recommended by the knowledge base, but got the following error message: No operation can be performed on wireless network connection 2 while it has its media disconnected.
Linksys Wireless Router :: WRT54G Laptop Doesn't Get Error In School Network
Jul 2, 2011I've tried looking for solutions on the windows seven forums and all over Google but none of them worked.The problem is, sometimes I get an "Unidentified Network, No Internet Access" error on my laptop (wireless). When this happens, the lan speed drops to 1.0 mbps and I get the "No Data Received" error when I try to load pages.My internet is on fine and my brother can access the internet fine on a desktop which is wired to the router and modem. My mom's notebook sometimes gets this error as well.
Is there any real solution for this problem or known compatibility problems between my WRT54G (version 1.1 I think) and Windows 7? Really need a solution to this, before I had to re-setup my whole connection, I didn't get such a problem. My laptop doesn't get the error in the school network either.
Linksys Wireless Router :: EA4500 Guest Network Re-authentication Doesn't Work
Sep 15, 2012I have successfully set up a guest network on my EA4500. Guest laptop associates with guest SSID just fine. Then via IE, it gets prompted for the guest password, which is entered and accepted just fine. At this point guest laptop is on the network.
BUT... at some point the guest laptop will need to reauthenticate (I don't know what the timeout is, but maybe one or two days?). Anyway, it's at this point that IE presents the guest network login page. But now after typing in the password, "enter" or clicking on the button does nothing. It looks like the guest web page doesn't get loaded properly or completely, so the reauthentication can't complete, therefore can't get to the internet. So, while in this state, I've also tried Firefox and Chrome, and same thing, no action when trying to submit the guest password. Tried rebooting guest laptop, and still same problem. Only thing I've found so far that works is to reboot the router. So I'm guessing there's a problem with the guest/web server on the router?? It's a real pain to have to reboot the router every day or two, when I've had other Linksys routers run for months without having to touch them.
I was running CCC 2.1.38 when I first noticed the problem. Since then I've downgraded to Classic 2.0.37, but it seems I still have the same problem. Again, I can connect & authenticate just fine initially, but when reprompted after some period of time, it doesn't work.
I've tried contacting Cisco support, but it looks like I'm at 91 days since purchase and thus outside of my 90-day complimentary support, so they happily provided me with the premium support options just to have the honor of talking with them. Guess I shouldn't have spent so much time trying to figure this out myself.
Motorola NVG510 / Enable Upnp On A Router That Doesn't Have The Option
Dec 20, 2011I recently got a Motorola NVG510 (from AT&T, they changed our internet plan and sent a new router) and since then I've had problems with Skype. I think I've narrowed the problem down to there being no upnp on this router to enable, and Skype doesn't like that.So, is there any way I can make this option available, or some other way to 'simulate' upnp so Skype will play nice? I read somewhere else that "IP Passthrough" may be an option, but I'm unsure about that.
View 1 Replies View Related