Linksys Wireless Router :: WRT54GH - Unable To Join The Network?
Aug 31, 2010
Ive been using this router for about 4 months now. suddenly it wont let me connect wirelessly through itouch nor through imac. it says Unable to join the network "linksys" eventhough "linksys" is indicated to be an available WIFI network and that signal is full. Problem is still the same even after i reset the router a couple of times pass 30seconds, set the security to No Password.if i connect the router with a cable it connects seamlessly and allows me to go online.
View 8 Replies
ADVERTISEMENT
Aug 7, 2011
I had PCs, Macs and other devices (iphone, itouch) able to connect fine to the WRT610n. I moved to an apartment and when I turned the network on all the devices could connect expect for the iphone and itouch. I have tried turning the wireless security off and MAC filtering off . I get the same "Unable to join the network" message.
View 7 Replies
View Related
Sep 19, 2012
My EA4500 router seems to drop mine and my wife's iPhone wifi connection at what appears to be the edge of my router's range. When we come back in range, our iPhone's intermittently give the error "Unable to join network.". And we're stuck in that mode. When I check the Devices menu in the CCC interface, I notice the iPhone device is configured and still online. However the "x" box to delete the device is greyed out because it's online. So how do I get out of this state and have my iPhone connect
View 2 Replies
View Related
Jul 26, 2011
ISP: CharterType: CableRouters: Belkin N150 & Linksys E1200Devices: Laptop, ipad, desktop w/wireless card, hardwired desktopI had random issues with the Belkin router. I was able to hard-wire connect via the router but very randomly my wifi signal would go out and I would be completely unable to connect to the router on any device. Now I am having the exact same issues with my new Linksys router.Sometimes the wifi works and others I get "Unable to connect to network" or "Unable to join network". I have not yet noticed a pattern.Here are the things I have tried:
* Replace router with new router
* Remove encryption
* Change encryption types
* Restart both cable modem & router
* Factory reset of router
* Changed Channels
* Reboot of router from http://192.168.1.1 interface than mine) are all called 2WIRE490 and 2WIRE593.
View 11 Replies
View Related
Aug 6, 2012
My router (WRT54GH) doesnt seem to be enabling the wi-fi network. Non of my devices are able to detect the wireless network.
View 1 Replies
View Related
Aug 6, 2012
My router (WRT54GH) doesn't seem to be enabling the wi-fi network. Non of my devices are able to detect the wireless network.
View 3 Replies
View Related
Dec 8, 2012
My laptop's wifi is just working fine with TP Link but I'm unable to connect internet via wifi on my iPhone 3G. My iPhone's wifi just works fine in my office. Is there any solution available?
iPhone 3G 8MB
iOS 4.2.1
Modem Firmware: 06.15.00
Router: TP LINK TL-MR3220
Firmware Version: 3.13.12 Build 120524 Rel.60134n
Is there additional setting for iPhone?
View 1 Replies
View Related
Apr 14, 2012
I reset my Dlink 615 wireless router. I held down the power and reset for 30 seconds and rebooting the system with the disc. I did change the router name, but believe everything else stayed the same. My desk top is working fine being "hardwired" but nothing wireless will connect.
I did see this time it installed Network Magic which I have since uninstalled and again rebooted the computer system and still cannot get the wireless to work. It shows the network available, but my password for some reason does not take.
View 1 Replies
View Related
Oct 8, 2011
I don't know how to access the router now to reset my system. My wired computer works fine. I have used this router without issue for several years. I used windows Xp and now I installed windows 7. After that i cannot connect to the router. I tried with 192.168.1.1 in my browser and with the setup CD. I just cant enter to setup the router. On the other computer the internet is functioning perfectly. I use the same cable, so the problem is not in the cables.
View 4 Replies
View Related
Nov 4, 2011
Firmware version is V1.0.01 b001 my WRT54GH has recently started to shuts off periodicaly without any reason. Will stay off for couple of minutes, then will turn ON again. In this period, On/OFF button has no effect.
View 4 Replies
View Related
Aug 12, 2011
I need to set the local IP for my new wrt54gh wireless router to 172.28.2.x & netmask to 255.255.0.0 but there is no option to set the netmask to 255.255.0.0 in the drop down menu / list .
View 5 Replies
View Related
Oct 27, 2011
1st time use cisco router.Where to check the list of user connecting to the router?
View 6 Replies
View Related
Sep 16, 2011
have problem with WRT54GH, almost every second page after reload gets an error message: Error 101 (net::ERR_CONNECTION_RESET): The connection was reset. Tried both on IE, Firefox, Chrome Tried to disable antivirus, no effect, the pages still load not all the time, firmware upgraded to the latest version. Before didi not have such problem with Zyxel W330EE.
View 4 Replies
View Related
Nov 16, 2010
I'm not able to logon to WRT54GH-SG over 192.168.1.1. I'm using correct password & have NOT forgotten. I'm hitting 401 page. The support rep told me reset the router which I do not want to before I explore any possibilities.
View 8 Replies
View Related
Feb 18, 2012
I have linksys WRT54GH wireless router with me.I want to know how can i connect it with any other wireless router. What settings do i need to change.
View 1 Replies
View Related
Mar 29, 2012
I've updated latest firmware & installed 5 pieces of WRT54GH at our building. Then I noticed each of them disappear from wireless connections list and IP scan list (no ping response). If they might not response to pings but they serve as switch without any problem, I mean there are no wired connection problems, they work as switch all the time. The problems are -again-
1-) Wireless lost and / or 2-) Ping response lost
Turning them off and on again will fix them. But I'm tired of bosses who complain about their faulty pc connectivity.
Don't they run 7/24? I tried to restart them on every 12 hours programmatically/remotely but it couldn't work.
View 1 Replies
View Related
Jul 23, 2012
I have a linksys WRT54GH wireless router running firmware v1.0.01 build 001.It's setup with DHCP.My desktop computer is connected to the router via cable.I also access the connection using my laptop, via wireless.The problem is that after I start using the desktop (wired connection), I can't connect from the laptop using wireless. It happens every time. I then turn the router off and back on again. After this procedure I can successfully connect from both the desktop (wired) and laptop (wireless).
View 6 Replies
View Related
Jul 9, 2011
I purchased WRT54GH wireless router back in 2009 and it was working fine except for past 1 month, wherein the Internet Connection was being disrupted 15 - 20 times in an hour. I thought it could be fault from ISP end; however after investigation by ISP we found the fault was not from ISP as, when Wireless was unable to establish connection with the DSL Modem it was failing but when tried to connect laptop with the DSL Modem it worked fine (Wired connection). I did try the Settings mentioned in an earlier post to change the UPnP and the Beacon Interval etc. This however doesnot seem to work as the internet has been disconnected almost thrice since then. (Approx. 15 - 20 mins). When the router is unable to connect to internet I restart the Wireless Router and the DSL Modem. After restarting, the Internet connectivity works fine.
Below are the Advanced Wireless Settings from Wireless Tab:
Authentication Type: Auto Shared (Default: Auto)
Basic Rate: Default (Default: Default)
Transmission Rate Auto (Default: Auto)
CTS Protection Mode: Disabled Auto (Default: Auto)
--------------------------------------------------------------------------------
Beacon Interval: (Default: 100 Msec, Range: 20 ~ 1000)
DTIM Interval: (Default: 1, Range: 1 ~ 255)
Fragmentation Threshold: (Default: 2346, Range: 256 ~ 2346)
RTS Threshold: (Default: 2347, Range: 0 ~ 2347)
View 2 Replies
View Related
Nov 20, 2010
I just bought WRT54GH router. I have one PC (running Ubuntu) connected via Wireless.Every 5-10 minutes I get disconnected for a short period of time (about 10-30 seconds). During that period I am able to access router configuration page, but can't connect to the "outer" world... Surely it's not about my Internet provider, since connecting the PC directly to the Internet cable works fine with no "disconnections".
View 9 Replies
View Related
Sep 19, 2012
I was using a wrt54gh which is no longer in working condition.. so i bought an E1200.the problem i face is when i try to restore my new router which is the E1200 frm the backup file frm my previous router the wrt54gh which is saved in my computer i get the error message " THE IMAGE FILE IS INCORRECT ".
View 4 Replies
View Related
Jul 14, 2011
I'm interested how to enable or use the "SpeedBurst" option on Linksys WRT54GH router?
View 1 Replies
View Related
Nov 22, 2012
Anyone has a register of problems between a router WRT54GH and A495 telefone of Siemens?I mean they can be working in the same frequency, that´s why in some rooms I can connect my wireless network very well.
View 1 Replies
View Related
Sep 13, 2012
i am a using a WRT54GH linksys router.. which was working fine for a year.. there was thunderstorm and lightning a few days back.. since then my routers internet port (the first port which says internet in yellow) has stopped working..
View 5 Replies
View Related
Jul 10, 2011
I just installed WRT54GH and wireless was working fine, after almost 3 hours passed I lost connection with it.I tried to connect using wireless with 3 different notebooks without success. Just using cable it works.I upgraded firmware from v1.0.010 to v1.0.01 but still not working.
View 7 Replies
View Related
Oct 7, 2011
I have a WRT54gh, and the signal strength is extremely poor. Full strength at about 15 centimeters, Then drops to 50% at 50 centimeters. By 1.5 meters, the signal is extremely weak or not visible. Have updated to the latest firmware, factory reset and power cycled. There are no other wireless networks or devices that would provide interference Have experimented with channels, thresholds, transmit type, encrypted/open, intervals etc..No luck. Due to signal dropping off so quickly it seems like a transmit strength issue rather than an issue that can be solved in the menu. I'm wondering if there's a way I can console log-in to the Linux kernel and check the transmit strength and perhaps bump it up by a few DB? It's out of warranty so a solution involving opening the case is also acceptable.
View 9 Replies
View Related
Nov 7, 2012
I’m having a problem of joining new Aps( Ari-ap1242G-E-k9 ) to the following wireless LAN controller. WLC details as follows,
Model No - AIR-CT5508-K9
Software Version - 7.0.116.0
AP Model - ARI-AP1242G-E-K9
AP console logs attached in Error.jpg file
View 5 Replies
View Related
Jan 10, 2013
I have an (AIR-LAP1310G-E-K9R) and I tried to join it to WLC 5508 but I'm facing an error, I get this error from the LAP 1310 console as below:
Compiled Mon 17-Jul-06 11:45 by alnguyen
*Mar 1 00:00:05.289: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar 1 00:00:06.289: %LINEPROTO-5-UPDOWN: Line protocol on Interface
[Code].....
View 11 Replies
View Related
Mar 7, 2013
Below are the errors that i am getting while trying to register AP (2606e) with vWLC (7.3.112) .
That is the error on vwlc
[code]....
But in wlc statistis we are able to see the ap join mac, screen shot is attached
View 6 Replies
View Related
Mar 10, 2012
we have WLC 4400, we have 40 APs with model no. AIR-LAP1131AG-N-K9 but we recenlty got an AP with model no. AIR-LAP1131AG-E-K9 which is unable to join WLC.
View 3 Replies
View Related
Nov 29, 2012
I am not able to join 1042 wireless AP with 2106 controller, even i mention that controller ip is 192.168.200.5 it try to join with controller on 192.168.200.6 ip address always. following are the error logs i can see on console.
*Nov 30 19:50:20.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.200.6 peer_port: 5246
*Nov 30 19:50:20.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Nov 30 19:50:21.435: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 192.168.200.6 peer_port: 5246
*Nov 30 19:50:21.436: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.200.6
*Nov 30 19:50:21.436: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
[code]....
View 4 Replies
View Related
Nov 26, 2012
I have problems with an AP AIR-CAP1552C-E-K9 (MAC: 2c:36:f8:73:e8:a0 )this AP cannot join to WLC 5508 software version 7.2.110.0.The AP ever gets associated to WLC.
I saw timeout messages and this error message:
%CAPWAP-3-ECHO_ERR: capwap_ac_sm.c:5656 Did not receive heartbeat reply; AP: 2c:36:f8:73:e8:a0
I don´t see any connectivity issues between the AP and WLC thorugh HFC network.One time the AP join to WLC and I saw this messages in debug CAPWAP:
*spamApTask1: Nov 27 09:01:06.316: 2c:36:f8:73:e8:a0 Change State Event Response sent to 10.64.128.165:16012
*spamApTask1: Nov 27 09:01:06.316: 2c:36:f8:73:e8:a0 CAPWAP State: Run
*spamApTask1: Nov 27 09:01:06.316: 2c:36:f8:73:e8:a0 Sending the remaining config to AP 10.64.128.165:16012
[code].....
View 2 Replies
View Related
Sep 10, 2012
I have a few AIR-AP1242-E-K9 AP that I have upgraded to LWAPP, after the upgrade the AP's don't join the controller. But some AIR-AP1232AG-E-K9 on the same site joins without any issues.The controller is: AIR-CT2504-K9, SW: 7.0.220.0. [code]
View 8 Replies
View Related
Nov 6, 2012
output are here
*Mar 1 01:28:21.018: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Mar 1 01:28:21.022: %LWAPP-3-CLIENTERRORLOG: bsnSetCurrentBHRate : fail to set
radio control and data rate
*Mar 1 01:28:21.179: %CDP_PD-2-POWER_LOW: All radios disabled - AC_ADAPTOR (00
00.0000.0000)
*Mar 1 01:28:21.984: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth
ernet0, changed state to up
*Mar 1 01:28:34.341: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigne
d DHCP address 192.168.10.244, mask 255.255.255.0, hostname AP2c54.2d0d.c3c4
View 1 Replies
View Related
