Is there a way to put the .EXE program in the start connection in Wireless Router WRT54G ?
or a .ASPX page when start the connection ? I want to do it:
I want to control the time that the users used the internet in the hotel. The users had the login and the password which one. And I want stop the connection when the user get the time.
I have a WRT54G router that I have not used for many years, but now I need to use it again. I have connected it between my modem and PC, and I am able to get an internet connection on the PC, but I am unable to connect to the router's configuration page. I have tried resetting the router numerous times (holding the reset button 5 seconds, 10 seconds, even longer) to reset the IP address to the default 192.168.1.1 address, but still cannot access the page. The power LED is on and the WLAN and Internet LEDs are on, and the LED for the port my PC is connected to is on. The hardware version of the router is v3. I tried downloading the latest firmware, but without being anble to communicate with the router at the IP address I cannot update the firmware. How can I go about connectiong to the router's setup page? When using ipconfig, the Default Gateway appears to still point to my ISP's IP address instead of the router's.
View 9 Replies View RelatedI recently "uninstalled" DD-WRT from my router and tried to install the actual firmware for the router, so I went to this page [URL] WRT54G and select version 5. My router is really version 5.1 but I read on this forum that this router works with version 5 so I downloaded it and installed it.
However, this is how my admin page looks like,
And I can't do anything at all. Is there a fix for this? Is there an actual version 5.1 firmware? Or must I switch to a different, proper router?
I have a Linxsys WRT54G. Once every week or two, it seems to "forget" its name, and revert to the default name. When I try to access it with my laptop or phone, "Multivac" is gone, and "Linxsys_XXXXXXX" (where XXXX are random numbers and letters) has taken its place. When I go to the setup at 192.168.1.1, the "Router Name" on the first "Basic Setup" page is still "Multivac," but the "Network Name" on the second "Wireless" page has reverted to the default. If I change it back to Multivac, everything is fine for a week or three until it "forgets" again.
View 1 Replies View RelatedWhen I had DSL, my WRT54G was my DHCP master for my home network. When I got AT&T U-Verse, their "gateway" became the DHCP master and also the wireless access point. But the signal was not strong enough where I wanted to use it, so I hooked up the WRT54G again. I discovered that if I connected the U-Verse gateway to the "Internet" port on the WRT54G Linksys, then my home network was split in two, which I did not want. The WRT54G access point is physically somewhat distant from my wired computer, so I wanted to keep the U-Verse gateway as the DHCP master. (The U-Verse gateway is a router with four "computer" ports but no "Internet" port.)
I followed instructions on the Linksys web site, and using my wi-fi connected computer I re-programmed the WRT54G to be "Disabled" as a DHCP server. Then I powered down and physically connected the U-Verse gateway to a "Computer" port on the WRT54G. This solved my problem: my distant wi-fi computer now has a good signal, and both computers "see" each other.
However, now I seem to have lost access to the WRT54G setup "web page." Is it possible to access the innards of the WRT54G when its DHCP service is disabled? Or would I have to reset the device to factory configuration and start all over if I wanted to make any tweaks?
Linksys WRT54G v5 Router
Arris TM502G/CT Modem
Whether it be downloading or just trying to watch a video on youtube. For some reason everytime I try to download something it appears to start fast but then it basically just stops. I'm running windows Vista and I've tried going into the router security settings and unchecking Block Anonymous Internet Requests.
I seem to have lost my username and password for the admin page for my WRT54G router.Is there a way to retrieve or reset the login?
View 9 Replies View RelatedI have been trying to change my password and all the settings on my WRT54G V8 router today because I forgot the password, and I can't seem to navigate the Basic Setup page. I can log in (most of the time) after resetting the router, but whenever I try to click on a different tab (like "Wireless", or "Security") it comes up with the page saying "This Page Cannot Be Displayed." I'd like to be able to put a password on it (which I have successfully done before on this router) because I live in a college dorm and would like to keep my internet from being bogged down by other people using it.
View 9 Replies View Relatedrunning linksys wrt54g wireless router to two towers and 1 laptop----had short power outage after which i lost connection to router only on one tower---other tower and laptop were unaffected----had green indicator lights for positions 1 and 2 hard wire connected towers before outage---now only position 2----looking for reasons why I lost number 1 and thus connectivity to the router----have tried powering down router etc---but have not reset it---looking for more info first
View 1 Replies View RelatedMy wifi router, Linksys WRT54G v3.1 has been working fine till now. Suddenly my laptop stopped receiving wifi signal. I am unable to access the set up page via 192.168.1.1 either from my laptop or from my desktop that is connected to the modem via the router. I reset the router as well but no luck.
View 5 Replies View RelatedSometimes, when I access my router's (Linksys WRT54G) web administration page, it comes out garbled; i.e. missing text, icons, links, form controls, etc.
Gets fixed after powering the router off then on again.
I'm trying to set up my sons I pod touch to my router i have the wrt54g v6 and it won't connect?
View 7 Replies View RelatedSituation: I have one Internet connection and I have need of two networks. One filtered with OpenDNS and the other unfiltered. I have a Speedstream DSL router provided by ISP for connecting to Internet. I have two WRT54G's and would like to utilize them to form two networks. The Speedstream is a router with a gateway address of 192.168.1.254.
From that Speedstream (only one network plug) I would like to go to a 5port switch. From that switch, I would like to configure the two WRT's to be two different networks (one using OpenDNS settings for filtering) with one having a 192.168.1.x address scheme and the other (no Internet filtering) having a 192.168.10.x scheme. Both would have DHCP enabled for their networks and the Speedstream would have DHCP disabled. There is not a need (at this point) to have the networks communicate.
Ive had a WRT54G v5 for awhile now. And just recently I went out of town and had turn off my router. When coming back and turning everything back on for some reason both wired and wireless components both have a connection then it loses the connection for awhile and comes back on. Ive power cycled both the router and modem. Called my provider and they said it was my router after doing some diagnostic tests. I tried to update the firmware and ive tried to restore to factory settings. Still it has a connection then it loses it.. Ive noticed on the modem when its not working that only the SENT light is flashing. (modem has power,received,sent, cable,pc). It is on AUTO DHCP and gets a ip and everything.
View 1 Replies View RelatedI just got a new Sharp Aquos Television and I wanted to try to find the SSID so that I could pick up a connection with my TV. When I went to command prompt and typed ipconfig to get the default gateway, the gateway ip took me to what appears to be my modem's config page and not the Linksys. how I can get to my WRT54G config page.
View 2 Replies View RelatedMy friend walked in with his laptop and connected easily.Yet is said it was not a "secure" connection.How will I know if MY computer has a secure connection?
View 1 Replies View RelatedLinksys WRT54G in reset mode, that is no security, SSID broadcast as linksys as it would be after pressing the reset button. When I go into the network and sharing center on my laptop running Vista and try to connect to the network it doesn't show up in the connect to a network dialog box. Rescanning doesn't work. My friends MAC locates the router with no problem. Disabling and enabling the wireless adapter and rebooting the laptop doesn't work. I'm working right next to the router. If I go to Manage Wireless Networks and add add a new network manually and input the network name (linksys) and Security Type disabled then I can connect to the router and all is well. I've set up a few routers and never seen this problem.
View 1 Replies View RelatedI am trying to connect a myTouchQ (t-mobile) through my WRT54G. The android shows that I'm connected and have a good signal, but I can't access the internet or any data. When I turn off the wi-fi connection, I can access through the 4G network. My provider is Cox Cable. I've unplugged the modem and the router for 30 seconds and even reset the security.
View 5 Replies View RelatedI been using my WRT54G with no problems for 2 years now. I lost wireless. I have 1 pc wired to the router and it works fine, e-mail, accessing the internet, everything. But I have 6 wireless devices ( 2 PCs, a printer, Nintindo 3Ds, a laptop and a nook) that use the wireless part of the router at different times. Anyways, last night, one of the wireless PCs lost connection, not seeing the router. Then I checked with each of the other wireless devices. None of them see the router. I tried many different things: powering down the router for two hours, hitting the reset button for 30 seconds, I even uninstalled the router and re-installed it and ran the setup-wizard. Again the pc I have wired to the router works but none of the wireless devices can see the router.
View 1 Replies View RelatedHooked up router and my laptop is connected to internet. Tablet attempting to get my wifi says " obtaining IP address from linksys" buts never makes the connection. how to get connection and keeping a secure wireless connection?
Samsung Galaxy 10.1 tablet to Linksys Wireless G 2.4 GHz router model WRT54G v. 2
I have a 3COM cable modem and a WRT54GSV4 with v1.06.1 firmware for a home network. I have 2 desktop computers hardwired to the WRT54G and use 2 different laptops with internal wireless cards. All run Win XP Pro. I have spent numerous hours on the phone with Linksys support and always get the same response (reboot, unplug, reset, etc.)
View 9 Replies View RelatedI have to reboot my router a couple of times per day because I lose WAN access. This occurs with both the wireless and ethernet connections. Basically, I see that I'm connected to the router, but have a self-assigned IP. Power cycling the router does the trick. I never had this problem before, so I'm wondering what's up. The firmware has long been up to date. Router version is 8.0.
View 2 Replies View RelatedWired connection to the router works fine. But it drops all the wireless devices (PC, phone, tablet) multiple times each day, sometimes only 30-60 minutes after reconnecting. Power cycling the router "fixes" the router and allows reconnection. There are 2 topics in the FAQ section that looked good: Getting poor or no signal from a wireless routerTop causes of dropping wireless connection on a Linksys routerbut clicking on those does not bring up anything.
View 9 Replies View RelatedI have this WRT54G wireless router and I just updated the firmware and everything. But I ran a speed test and the wireless speed is less than half the speed when I connect my pc to the router with a cable. i.e. I have a 32 Mb connection and with cable I get +31 Mb, but with wireless I barely get 13 Mb.
View 9 Replies View RelatedI have a WRT54G conected to a desktop through a wire, and conected to a laptop wirelessly. It starts working fine, and after a while i get no internet connection in my laptop nor my desktop. After this happens i disconect the power source from the router, i conect it back again and it starts working.
View 9 Replies View RelatedI have an Option wireless router that powers have of my house and i connected a WRT54G for the other end of the house, but the problem is that the Option router needs a password to access the internet for the first time, so when I try to do the quick setup on the WRT54G it can't find the internet to finish
View 3 Replies View RelatedMy router's wireless connection goes down intermittently,about once a day. I can access the network with a machine that has a hardwired connection to the router only. To get it back up I have to perform the following steps.1) Reset the router.2) Go to the router web page, http:\192.168.1.13) Set router name4) Set router password5) Set wireless network name6) set wireless network secuity mode: WEP7) set wireless network password
LinkSys WRT54G V3.1 router with firmware update V4.21.1
I would like to enable VPn in WRT54G.Cann't find where to set up user name & psw.Is client necessary to set up user name & psw if there was no need to set up user name & psw for in WRT54G ?
View 3 Replies View Related My WRT54G lost the WiFi connection. I can get the internet if I connect the cable from my modem to my computer but my wireless connection is gone. So it's an issue with the router or settings. I called Linksys and was told the settings would have to be reset/updated. I was told there would e a fee. I did not want to pay a fee. I'd like to try to resolve myself.
I have a Mac laptop. Verizon ISP.
Wired computer runs XP sp3. Wireless runs Ubuntu 10.04. Hooked to Embarq DSL modem. Setup worked flawlessly for a year or more. Now the router is sporadically dropping the internet connection for both PCs. I haven't discovered how to guarantee an immediate reconnection so the desktop is now connected directly to the modem. The modem is apparently stable as I'm not losing the internet connection. When the router is in the circuit, the internet connection may or may not appear shortly.
View 7 Replies View RelatedI have 2 laptops in my home, I had no problem getting one to connect to the internet. The second one I'm having trouble connecting, I am wireless, I didn't have a problem at my old house with another laptop connecting to the internet with this router. I'm trying to save myself some money by not going through my wireless company, and end up having to get their router, which I already have their modem.
View 1 Replies View RelatedI have a WRT54G router anf DSL modem. My router keeps losing connection, wired and wireless (My connection is not visible on any laptop). I tried briged mode on the modem and I tried the configuration CD. Everything works for some months or weeks. Sometimes the CD setup asks me for manual configuration. I am using modem to desktop connection?
View 2 Replies View RelatedI have to replace our WRT54G router--it's currently connected to a power booster and and omni-directional antenna. Is there a router with an antenna connection compatible with the WRT54G--preferably a single antenna model?
View 4 Replies View Related