I just got E4200 and it seems my homeplug is not able to connect to router. I don't see it listed in DHCP Table under status. I could only see my Desktop was connected. Are these two not compatible? Homeplug works fine my old router which is Trendnet TEW-452BRP.
View 3 RepliesI just installed a E4200, and found that once I connected my Homeplug Powerline to E4200, the connected (wired / wireless) computer (with E4200) connection will be dropped. The connection become normal again once I disconnected the Homeplug with E4200.
View 5 Replies View RelatedIf the two are compatable, how exactly do I go about setting them up, without compromising my security settings? Whenever I search for a wireless signal on my DS, I come across the router but it's locked and when I attempt to sign on to wifi in my games, I recieve error code 20100.
View 6 Replies View RelatedI have been successfully printing to my HP 8250 printer USB connected to my e4200 router for nearly a year from my xp ethernet pc and 2 windows 7 wireless laptops. Today nothing could print to it and when I deleted and tried to reinstall using cisco connect it tells me I am trying to connect an unsupported device both on ethernet XP PC and wireless windows 7 laptop. I have installed no new software or drivers this year. I have had to regress to attaching the printer back to the XP PC and sharing it which obviously means the PC now needs to be switched on to print.
View 4 Replies View RelatedI am using window 8 preview edition. Just purchased the EA4500 router. Do you think it's compatible before I open the package.
View 1 Replies View RelatedI picked up an EA4500 about a month ago and so far it works great! I would like to purchase a USB hard drive to plug into it, but noticed the officially supported drive list on the support site seems to be a little out of date. good "current generation" USB hard drive that works with this router?
View 5 Replies View Relatedwill my linksys wrt54g v8 work with windows 7 with a 64 bit. are there drivers available?
View 3 Replies View RelatedBasically, my internet's been fine until about a week ago. I'm currently using the Aztech DSL1000EW router/modem which has been working great up to now. My problem is this: after about 5-30 minutes (time fluctuates, annoying because after 15 minutes of continuous usage you think the problem's solved!) all webpages suddenly become 'unavailable'. I've disabled proxies under LAN settings, tried flushing DNS, resetting winsock with the netsh commands but to no avail. To get the internet to work again, I can just go to my router page, click disconnect and reconnect and it'll work for another 5-30 minutes.
View 8 Replies View RelatedI have the following network setup. I have a dynamic IP address from my ISP. I connect my fiber to a D-Link DIR-645 and set up my wireless network. The coverage is kind of poor in my son's room so I use a D-Link Powerline Homeplug 501AV to extend internet to my son's room. I connect one Homeplug to the DIR-645 and set the other Homeplug in the power outlet in my son's room. It works if I connect his PC or Xbox via an ethernet cable to the Homeplug in his room. Since he has both PC and XBox I have connected a D-LINK DIR-100 to the Homeplug and have two ethernet cables connecting to his PC and Xbox. Here is the problem. I don't get an internet connection to the DIR-100.How shall I configure the two routers to work?
View 1 Replies View RelatedToday I set up a home network:Cable router plugged in to......Homeplug network, (D-Link DHP-307AV/B 200 MBPS PowerLine Homeplugs) plugged in to a LAN port of......a spare adsl router configured as per here: Connecting Additional Routers | Tech Support Forum...with two desktop machines plugged into the LAN ports of the ADSL router.Both of the desktops have got similar specs, are equi-distant from the ADSL router, and are both connected using Ethernet, not wireless.One of them gets a 9MB/sec ADSL [URL]download, the other can't even bring the webpage up and times out if you ask Google to do a search.Taking out the adsl router and plugging the desktop straight into the homeplug gets a network speed of ~13MB/sec on [URL].Plugging a computer directly into the cable modem gives network speeds of ~40MB/sec on [URL] How can I improve on this, and have it so that both machines can access the Interwebnet at a decent bandwidth?
View 8 Replies View Relatedcan't figure out what's killing my desktop's connection.I'm running Windows 6 Ultimate x64. I was using an Aztech Wireless-N WL522USB adaptor before, and it was working perfectly fine apart from the fact that it was a tad slow, which led me to buy a new Linksys AE1000 adaptor.I'm guessing I caused some kind of conflict, because after an hour or two of use (and after installation of the drivers), I started getting DRIVER_IRQL_NOT_LESS_OR_EQUAL BSODs, as well as my connection dying on me. I did not uninstall the drivers for the Aztech adaptor before installing the new one, and I have a feeling this might have something to do with it. Anyway, right now, I've switched back to the Aztech (intend to return the Linksys), and I'm still having connection problems. The tooltip of the wireless icon on the toolbar shows "No Network Access", while clicking on it shows "Limited Access". I have neither internet access nor local access to the router. The weird thing is that it works for a VERY short period of time after starting up, where I will have full internet access, and after which it will revert to the Limited Access state.
View 14 Replies View RelatedI'm using Aztech wl552usb and the gain/range is very bad.Recommend me some other USB Wireless Adapter?
View 2 Replies View RelatedI am using router aztech-hw550-3g. i have Service pack 3 on my laptop. I was able to connect to my router fine but from the last 3 days i am unable to connect to my wireless network. Whenever i am trying to connect it is showing me a msg as unable to connect to you preferred network. It's Dhcp configured network.
View 1 Replies View RelatedI recently purchased an Aztech wireless-n repeater #WL556E to increase my signal strength on my patio. I followed the instructions step by step and it works for about an hour and then stops. This is on my Apple iPad first generation. If I restart my iPad it works for an hour or so and quits. I have the repeater about 7 feet up on a shelf.my wife has the identical iPad as mine and hers works fine on the repeater.
View 1 Replies View RelatedI have a wired BEFSR41 V2.1 with 1.46.02 firmware. It has been working fine with several varieties of W98SE, W2000, and XP machines over the years.When I installed VMWare a couple years ago, I noticed that the Vista VM didn't connect to the router. Since I was just testing some local stuff, I didn't bother to investigate or resolve the problem. Now I have a new HP Windows 7 machine, and it doesn't connect when connected to the router. The diagnostic doesn't think the cable is plugged in. When I plug the DSL modem directly into the W7 box, I can connect to the internet just fine. Also, I notice that when I plug the modem into the W7 box, there are some LEDs that flash on the network card inside the box.
However, when I plug the cable from the router (the same one that normally works fine with the XP machine) into the Windows 7 box, none of the LEDs on the network card flash. This is probably a hint that things aren't working.
I tried disabling the IPv6 protocol. That didn't work. I have the latest firmware for the V2.1 according to the Linksys support site. I tried a different cable. I tried several resets from the pinhole in the front of the router, several power cycles, and reboots of the W7 box.So I'm guessing that the BEFSR41 V2.1 with 1.46.02 is incompatible with Vista and Windows 7.
I have a Linksys WRT54GL wireless G router and I just brought a Roswell Wireless N card. would these two items be compatible with one another? or would I need a new router/adapter?
View 4 Replies View RelatedI've noticed that my WUSB54GSC is completely unsupported by Windows 7, nor has Linksys published any new drivers. From browsing these forums and the internet, many other Linksys users are experiencing much trouble with getting their wireless adapters to work with Windows 7.So please, Cisco, publish new Windows 7 drivers... I'm completely taken back that there is nothing to do with Windows 7 anywhere on your site, and disappointed at none of your products being ready for the new Operating System. Im stuck with a useless router. I've tried for hours and hours to try random fixes i found on the internet, force install drivers preloaded on Windows 7, and force install the out of date Linksys drivers....to no avail. I still need to activate my Windows 7 online, and i can't activate it if my wireless adapter doesn't work. I will keep this in mind when i purchase routers/adapters in the future. I've already tried using the ra-link drivers to get my adapter working, but every time i get a "code 10" error stating that "This device cannot start". Any driver that i do install from Windows 7 pre loaded drivers ends up giving me that error. And all the out-of-date linksys drivers don't even successfully install the drivers...
View 9 Replies View RelatedSo I bought the WUSB54GC wireless adapter today. My computer's OS is Windows XP Professional. Whenever I load the disk and click "Start Setup" a window pops up that says "This version of Windows in not supported."
View 9 Replies View RelatedI have a recurring issue with my e4200v1. My wired and wireless connections work fine, but I can't get to the administration website. I have https only set up, and after I get thru the 'certificate error' screen, I get an error that says web page is unavailable. Firfefox tells me that the connection was lost - error 101.I have tried wired and wireless, multiple computers, multiple browsers. I even turned the firewall off on one computer (or I think I did anyway).The only way I know how to fix it is by completely resetting then setting up the router all over again.
View 2 Replies View RelatedUpgraded from WRT610N to E4200. Since upgrading to latest firmware the wan just disappears both 5 and 2.5 Ghz bands. Happened with older firmware but not as often. Using it in briged mode. When this happens I can't even get to the management page with a lan connected pc. Have to do a hard reboot to get it to respond again. This is unacceptable for a router at this price point.
View 2 Replies View RelatedWMP600N is compatible with Windows 2008 Home Server?
View 1 Replies View Relatedi want to pick a 3g gateway HUAWEI B683 Router for my official use, but my computer is running for Mac OS, i don't know whether it is compatible with my Mac OS or not,
View 1 Replies View RelatedI am connecting the E4200 to a Sonicwall TZ100. I want the TZ100 to assign IP addresses to devices that connect to the LAN via the E4200.
How do I have the E4200 act as a WAP only or not assign IP addresses and push that responsibility to the TZ100?
I'd still want the E4200 to have a SID key for LAN access security.
I have a 6 month old Cisco e-4200 router that is updated to the latest firmware, connected to a Motorola surfboard modem on Sudden-link in Midland, TX.
I previously used this exact same setup on Cox Cable in Wichita, KS with no problems. Upon setting it up down here I cannot get the router to pickup an IP address. I have Power-cycled everything multiple times, did a complete reset and re-installation of the router software and still no luck. The Sudden-link techs have no idea what is wrong. They said that the modems signal is strong and everything should be working.
Actually I did get it to work once for a couple of days, however when redoing the surround sound system I had to unhook the cable line and it quit working and I haven't gotten it to work again since. I have tried unhooking everything. Turning it all off. Waiting for 5+minutes, and then reconnecting in order: First the modem, then an ethernet cable to the computer which will usually work. But as soon as I unplug the cable from the computer and plug it into the router it stops working.
I bought Linksys E4200, at a time that is the TOP of the line Cisco routers for Home use.I noticed a serious usage issue with it, I could not identify which are the wifi devices connected to choose for access restriction or parental controls, as the dialog box state only as "Network device", and software control by Linksys does not have any provision to use MAC ID or any other option "except " looking at the dialog box as "Network device".
View 4 Replies View RelatedHow to connect the e4200 to a mac via afp? Trying to mount the network drive so the mac see it and can use for time machine backup.
View 3 Replies View RelatedTrying to update it to the new smart Wifi but getting this error "Incorrect Image File".Yes Ive tried redownloading yes ive tried different browers and yes to unziping the file! and Yes Im downloading the correct version I even tried version 1 for the heck of it and still nothing.
View 3 Replies View RelatedI just received by replacement e4200 v1. I updated the firmware to 1.0.03 build 14 and am up and running just fine. The specs say e4200 should be 300+450Mbps. I am using a software "inSSider 2.0" to view my wireless setup. I get 144(N) at 2.4GHz and 450(N) at 5.2GHz. Please note these are max bit rates and not connect speed or throughput rate. The "inSSider" software gives me the following:
2.4GHz - 1/2/5.5/6/7/9/11/12/14/18/22/124/28/29/36/43/44/48/54/58/65/72/86/116/130/144
5.2GHz - 6/9/12/15/18/24/30/36/45/48/54/60/90/120/135/150/180/240/270/300/360/405/450
I get this information by hovering on the max bit rate field on the row displaying my SSID. So is it correct to say that my e4200 is not designed to reach 300Mbps at 2.4GHz. There is an earlier discussion thread about connection maxing out 144. Please note I am not talking about connect speed or thru-put speed. Max design bit rates of dual band router labeled e4200.
Just got a e4200. However I also have a cisco av power line adapter which worked fine. However when connecting to the 4200 it doesn't recognize the Internet. Have rebooted, reset switched ports etc. But it still doesn't work. It sees the network but not the Internet. Have tried everything ikon but no luck. Cannot connect my directive to the Internet. If I can't get it to work will have to run a 50 foot cable.
View 5 Replies View RelatedFirmware 1.0.00 on my E4200 Hardware v1.0 provided a functioning 6to4 tunnel through Comcast's 6to4 facility. Windows and Linux clients on my local network discovered IPv6 addresses and were able to use them successfully.Unfortunately, after the upgrade to 1.0.03 this functionality was gone. I missed reading the ChangeLog, which said that the automatic tunneling feature was removed in 1.0.01. The now provided IPv6 functionality works much less well. First, automatic configuration (discovery of the 6to4 via IPv4 anycast) no longer works with Comcast's gateway. If I configure the tunnel manually, by specifying a 2002/16 prefix, I regain IPv6 connectivity, but only for Linux clients on my local network.
Windows 7 clients suffer from the problem that because the E4200 hands out ULA addresses, they end up preferring those ULA addresses when making global IPv6 connections in the IP 'source' field, which of course does not work. It's like putting your company mailbox code as the return address on a letter you send via US Mail. Other home routers, such as the AVM Fritz! (url,...) suffer from the same problem. However, they provide an option to turn off ULA at the router.Is it possible to turn off ULA for the E4200?
I have a E4200 router v.01 and when i updated the latest firmware (due to security exploit) it seems that whenever i acess the router settings (192.168.1.1) it doesn't ask me nor to input the admin and the password anymore, using wifi or wired.. I want the usual proccess whenever i go to 192.168.1.1 it will ask me to input my admin and password to change my router settings..
View 4 Replies View RelatedI have an E4200 and the Cisco VPN client on my home computer that I use to access a work network. The VPN client cannot connect unless I either (a) bypass the E4200 and connect directly to my cable modem or (b) disable the SPI Firewalls on the router. I have all the VPN passthroughs set to "enable" on the router, but still cannot connect. The VPN client is using IPSEC over TCP on port 10000.
View 5 Replies View RelatedI've been trying to get FTP Running up on my router for some time now.
I know my current WAN address and have setup a specified folder on my E4200 for the FTP partition. A username for myself has been created with login info and I have forwarded the port I have specified on my router's FTP configuration page.
I try to log into the server, but whenever I try to log into it, I keep getting a "incorrect login information" message back at me.
If I cancel out of that then I get an error message saying it can't find the specified folder and to check the address of the server.
I know the login information information is correct and I've tried changing the password to others of varying lengths.
I've also tried changing the port I'm running the FTP off of incase my ISP has blocked that port, nothing works.