Linksys Wireless Router :: How To Set Port In E2500 To Make Web Traffic To 192.168.1.1281

Jul 6, 2011

My home web hosting used to work. But because of changing ISP from Verizon to TWC, TWC gave me a modem-router and I bought my own Linksys E2500 router. Both Verizon and TWC services I subscribed are Dynamic IP. I use a third party to redirect the web traffic to my home.TWC gave me a simple modem-router in a box. Input is coax and outputs are 4 ethernet ports. I use one of the 4 ethernet outputs of the TWC box to connect to the internet ethernet input port of the E2500. All my wire and wireless devices are now feeding off the E2500. All wireless and wired devices work and can browse internet through the E2500.I have assigned one computer as the web server and set the internal IP addess of this computer as 192.168.1.128. This is the same for the setup with Verizon before.I loaded the CD came with the E2500 router and can see the LAN 192.168.1.128.My problem starts from here, I do not know how to set the port in E2500 to make the web traffic to 192.168.1.1281. Using the E2500 CD, I click to "APPLICATION AND GAMING", then "SINGLE PORT FORWARDING". under the APPLICATION NAME, I select one of the box to HTTP and type in 128 under "TO IP ADDRESS". I then click ENABLED, then "save settings" . The 192.168.1 is fixed in this window, I can only type 128.This does not work. I can browse internet but cannot access my website from any machines using domain name.Then I tried:2. with item 1 above, I continued to do SETUP>>BASIC SETUP>>DHCP RESEVERSATION. I can see the compute/sever name and the 192.168.1.128. I then click the "select" and save the client.I restarted the computer/server, I unplug and plug the E2500 power. I check the server internal IP address and it is still the same. But I just cannot browse to my website. I can browse other places.

View 9 Replies


ADVERTISEMENT

Linksys Wireless Router :: E2500 - Wan To Lan Traffic

May 10, 2012

I have an E2500 configured inside my network. It is configured to give wireless PCs (This subnet is connected to a Lan port with 10.30.0.0 address) another subnet than wired PCs (this subnet is connected to Wan port 192.168.0.0). Since i configured i can access from wireless PCs to servers and PCs in the wired subnet but cannot access from wired computers from to wireless PCs. I suppouse it is because traffic is restricted from Wan to Lan.

View 5 Replies View Related

Linksys Wireless Router :: E2500 / Firmware 1.0.7 - Traffic Statistics

Mar 10, 2013

I have an E2500 router, running the latest firmware 1.0.7.

Where or how can i see which is the machine (mac or ip) that is doing more traffic, in fact i would like to see what computers are doing how much traffic.

This is a default on most routers, its so weird to not been able to find this on a Cisco product.

View 1 Replies View Related

Linksys Wireless Router :: E2500 Block Outbound And Inbound Traffic On TCP 5222 / 5223

Oct 23, 2012

I am trying to block outbound and inbound traffic on TCP 5222 and 5223 on E2500 but cannot figure out how. The reason is I have kids in my house using KiK (texting app) on iPads, iPods etc.  My goal is to eliminate this applications ability to function for ANY wireless device connected to my WLAN. 

View 1 Replies View Related

Linksys Wireless Router :: E2500 Will Not Allow Port 80 Access

Apr 21, 2012

I bought a new e2500 and it is working fine, all but port forwarding.  This is not even close to my first router and I am advanced when it comes to setting these up.  I have tried for days to get port 80 to open up and it refuses. Now I do notice that when you access the router setup through a web interface, it uses port 80.  I have forwarded port 80 to the ip address of the device, put in a reservation in DHCP with MAC address, etc. etc. and still nothing.  Heck, I have even turned that specific device IP into a DMZ, and it STILL will not work.For the record, I had an e2000 set up the exact same way and it worked just fine and I was able to access port 80.

View 6 Replies View Related

Linksys Wireless Router :: Port Forwarding On E2500

Jan 19, 2012

I've read over the FAQ and followed the normal instructions for port forwarding, but can't seem to get it to work with this particular router, E2500.  I have tried both the single port forwarding and the multi port range forwarding, and neither works.  I've tried an older WRT54G router and port forwarding works fine on it, so I know it's not my ISP.I'm running the latest firmware provided by Linksys/Cisco. 

View 1 Replies View Related

Linksys Wireless Router :: E2500 - Set Up Port Forwarding For PS3?

Jan 28, 2012

I recently got a e2500 router and set up the port forwarding for my ps3. But then i go to check the ports to see if they are open and they all stay closed.I have no clue whats wrong as I have entered the port forwarding info correctly as I got guideline from portforward.com but still no luck

View 2 Replies View Related

Linksys Wireless Router :: E2500 Port Forwarding Does Not Work

Apr 2, 2012

IPort forwarding simply does not work with this rounter on Comcast. I called comcast to see if they were blocking ports and they insist they ARE NOT.So what can it be? Was on FIOS with their modem/router combo and port forwarding worked like a charm with them.I've tried single port forwarding, port range forwarding, yada.
 
I am using the correct internal IP address on the machine I want to enable port forwarding on..Latest firmware is installed 1.04 or whatever (just purchased the router and updated during the Cisco Connect install on the 29th). Guess I should go find a cheaper router that actually works...

View 7 Replies View Related

Linksys Wireless Router :: Port Forwarding Not Working On E2500

Dec 12, 2011

I've read over the FAQ and followed the normal instructions for port forwarding, but can't seem to get it to work with this particular router, E2500.  I have tried both the single port forwarding and the multi port range forwarding, and neither works.  I've tried an older WRT54G router and port forwarding works fine on it, so I know it's not my ISP.

View 4 Replies View Related

Linksys Wireless Router :: E2500 - Forwarding Port To See Camera Over Internet?

Feb 15, 2012

I am trying to forward a port to see a camera over the internet.  On the single port forwarding screen under Gaming, I have put in port 8090 (Ext and Int),Protocal both, an IP address and Enabled.  I have also tried putting in a range, but neither seems to work.   After forwarding the port, I check with What's My IP Addrewss to get the external IP, then put the IP in a blank browser page with and without the port number.  I have tried this several times without any result.  

View 9 Replies View Related

Linksys Wireless Router :: New E2500 Port Light For Wifi Printer Not On?

Aug 18, 2011

I have just upgraded my Linksys router from an older one to the E-2500 about a week ago.  Everything is working great on my wired desktop and 3 wireless laptops except the printer will no longer work from any of the computers.  I've checked the printer wireless settings and they are correct (ssid and password) and it says it's connected to the wlan.  Each of the computers shows the printer is active and set to default BUT the port light on the back of the new router is not on. I have changed cables and still no light, the printer is set up for sharing and it did work a couple days ago but port light was on then.

I have not added anything that wasn't hooked up on my old router, I"m just trying to get what I had on the old router to work on the new one. Everytime I call support, they have me change something that messes up what a previous agent had me do. Now they want me to pay for a direct connection so they can upgrade my router firmware...they didn't even ask what version I already had which happen to be the same version that is available on [URL] so if I had agreed, I would have paid for nothing. I had already paid $29.99 for additional 14 day support on my old router only to find out I needed a new one.

I've been using Linksys routers for quite awhile but I'm just about ready to change brands. I would really like to give this E-2500 a chance.

View 1 Replies View Related

Linksys Wireless Router :: Port Forwarding In A Routed Private Network With E2500?

Jan 7, 2012

I would replace an old Levelone Router with a Linksys E2500.I have 3 different routed private networks (e.g. 192.168.1.0/24 , 192.168.101.0/24 and 10.0.0.0/24) How can I forward different ports to this 3 different private networks with an E2500.Under "Games&Applications" in the" Portforwarding" menu the first 3 octets of the "to IP-address" are fix and corresponds ever with the LAN ip address of th E2500.

View 4 Replies View Related

Linksys Wireless Router :: Port Forwarding For Video Streaming Server On E2500?

Feb 4, 2013

So I am trying to forward a port on my linksys E2500 router. I need to forward 198.162.17.3 for a video streaming server.  When I go to the admin panel I am only able to change the last digit, ie 198.162.1.x   

View 5 Replies View Related

Linksys Wireless Router :: Port Forwarding On E2500 - Cannot View Cameras Remotely?

Jan 19, 2012

I purchased some cameras for my building. I have them set up ok on port 85 but I can't view them remotely until I set up the router to forward the port. I have a charter modem and the E2500 router.

View 1 Replies View Related

Linksys Wired Router :: E2500 - Cannot Remotely Access Zoneminder On Port 80

Jan 4, 2012

I have a Cisco Linksys E2500 modem and I cannot access Zoneminder which is essentially a Linux Security video DVR software package.  It is running on a Ubuntu Linux server. 
 
I have HTTP port 80 forwarded to the the static IP address of the Ubuntu server but I repeatedly get a error indicating that the connection timed out whenever I try to access Zoneminder remotely as in remotely accessing it from a coffee shop.
 
I have absolutely no problem accessing Zoneminder when I on my home local LAN.
 
I can access other software from remote locations on port 4369 with a TCP preferred protocol setting.  That is, port 4369 is forwarded to another Windows workstation with an assigned static IP address. Absolutely no problems with port forwarding of 4369.
 
Also,  I've tested port 80 on the YouGetSignal website which is used for testing port forwarding.  The website indicates that port 80 is closed.  But when I test port 4369, the website reports that the port is open.  Zoneminder which uses port 80 is fully operational when I test port 80 via YouGetsignal.
 
My ISP has told me that they do not block any ports including port 80. 

View 7 Replies View Related

Linksys Wireless Router :: E4200 Rebooting Every Time It Sees Traffic On Any Port

Jun 15, 2012

My E4200 is rebooting every time it sees traffic on any port, including the internet port. It does not reboot itself if there is nothing plugged in.
 
Already tried: soft reset (power off for 30 seconds), soft reboot via back panel button, hard reset (press reset for 30, unplug and hold reset for 30, plug in while holding reset for 30).

View 9 Replies View Related

Cisco Routers :: Port Forwarding In Routed Private Network With Linksys E2500

Jan 5, 2012

I would replace an old Levelone Router with a Linksys E2500.I have 3 different routed private networks (e.g. 192.168.1.0/24 , 192.168.101.0/24 and 10.0. 0.0/24)How can I forward different ports to this 3 different private networks with an E2500.In the "Games&Applications" Menu are the first 3 octets of the "to IP-address" are fix and corresponds with the LAN ip address.

View 3 Replies View Related

Cisco Switching/Routing :: 3825 ISR - Traffic Route From Switch Port To Router Port

Jun 5, 2013

I'm fairly new to Cisco products am in the process of developing my network knowledge on a deeper level.  I have a 3825 with a HWIC-4ESW and I'm struggling to fully understand how the two "see" each other.  I've setup a V LAN with a layer 3 address on the HWIC and added the switch ports to it.  This seemed to allow devices connected to the switch ports to talk to the built-in router ports.  I thought this was all making sense until i applied an access-list to the router port.  It's a simple ACL i'm just using for testing and the only thing it does is blocks telnet from anywhere.  I know the ACL is setup properly because if I connect a device directly to the router port i cannot telnet to the port.  However, if i connect a device to one of the switch ports, i am able to telnet to the router port successfully. 

It seems that I'm missing something with how traffic flows from the switch port to the router ports and how the two "see" each other. 

View 2 Replies View Related

Linksys Wireless Router :: Missing MAC Addresses Filtering In Linksys E2500?

Sep 5, 2011

I'm currently setting the MAC address filtering for my Linksys E2500 router. I have about 20 devices which i'm allowing to access my router, so i keyed in the MAC addresses into the config page and save setting. But only 16 addresses are registered, the rest refused to register no matter how many times i key in, it just reset back to 00:00:00:00:00:00 after i click on save setting.

View 4 Replies View Related

Linksys Wireless Router :: Reset Static DNS On A Linksys E2500?

Oct 4, 2012

I previously entered in settings for the "Static DNS" 1 through 3 (using ip addresses from OpenDNS and one from Google DNS).
I want to remove these so the router reverts to using the DNS allocated to it by the ADSL modem (which will likely be the IP of the modem, which then forwards the requests to the DNS from the ISP).But I can't clear the Static DNS settings. I have to put in 0.0.0.0 but the last zero is not accessed. I get the error: The value is out of range [1 - 254].So I end up with 0.0.0.1 and then all Internet access is lost on the computers because they are being given a bad DNS IP.
 
How can I reset the static DNS ip address back to 0.0.0.0 ?

View 4 Replies View Related

How To Make Linksys Router Actually Wireless

Jun 26, 2012

Computer language is a foreign language to me, so I really need the basics. I have a Linksys wireless router that has always had a computer hard-wired to it. We want to avoid having to have a computer hard-wired in order to get internet throughout the house. what I need to do to make the router actually wireless?

View 1 Replies View Related

Linksys Wireless Router :: Bumped Off VPN When Using E2500?

Feb 28, 2013

I am trying to connect to a new VPN using my E2500 router.  As soon as I connect, the connection breaks.

View 1 Replies View Related

Linksys Wireless Router :: Cannot Register E2500

Sep 3, 2012

i buy a new e2500 from staples. but when i try to register the product. it shows me  "Serial Number you entered is invalid.".  i am sure i choose the right product and number to register.. so is that mean some one used it..

View 3 Replies View Related

Linksys Wireless Router :: Adding E2500 As Second Set-up

Dec 18, 2012

I want to add my E2500 as a second wireless router to cover my entire house.I have a Motorola Surfboard SBG6580 cable modem (Time-Warner) at one end of the house.I added via powerline Ethernet connection a new E2500 wireless router at the other end of the house.The E2500 set-up with all defaults and has the same SSID and Password as the Surfboard cable modem.It seems to work OK, but I wonder about network confusion/interference.Do I have to configure the E2500 in some manner to allow seamless roaming of my wireless devices (iPad, Cell Phones, Netbook)?I had an RE1000 with just the Surfboard, but it did not quite do the trick, and does not like both routers connected at either end.

View 9 Replies View Related

Linksys Wireless Router :: How To Reset E2500

Nov 23, 2011

How To Reset E2500 Router

View 1 Replies View Related

Linksys Wireless Router :: Setup A WAP With E2500?

Jan 23, 2012

I am trying to setup a WAP with my linksys 2500. I am currently using a Gateway connected to my DSL and am looking to set up the access point through the E2500.

View 1 Replies View Related

Linksys Wireless Router :: Why Need To Keep Resetting E2500

Nov 18, 2011

So, i have a e2500 router and find that every so often, I have to unplug it and reset it because I am losing my internet connection. 

View 7 Replies View Related

Linksys Wireless Router :: How To Set E2500 To Use As Slind Box Pro

Dec 22, 2012

How to set router to use as Slind Box Pro?

View 3 Replies View Related

Linksys Wireless Router :: E2500 As AP Not Working?

Jan 4, 2012

I currently have my E2500 connected via wired LAN (not WAN) port on another router. The E2500 has an LAN IP of 10.0.0.2 and the router has 10.0.0.1 and a dhcp range outside of these. DHCP is disabled on the E2500. I can use my E2500 as a wired access point with no difficulty I plug something in and it calls the router and gets an address, but I can not get DHCP through the wireless of the E2500.

View 2 Replies View Related

Linksys Wireless Router :: E2500 Keeps Disconnecting

Aug 7, 2011

I have Time Warner as my internet company. I recently purchased a new Linksys Router Mode E2500 because I have been having issues with my old router. My internet was disconnecting sporadically. After connecting the new router, a started getting the same issue. I replaced my internet cable modem to a Cisco 2100 modem (provided by Time Warner). I noticed that the issue keeps happening sporadically which makes me believe it is my Linksys router. Every time a new wireless connection is connected, my modem circuit dies. This happens sporadically.

View 4 Replies View Related

Linksys Wireless Router :: E2500 - Cannot Access It

Dec 27, 2011

I have bought and installed an E2500 router 4 days ago. Installation of router and network using Cisco Connect was easy and without problems. However, after 4 days of usage, not changing anything in the network nor running Cisco Connect or accessing the web interface, I tried to start Cisco Connect and got the message  "Cannot access your router".Internet is running, router is accessible via 192.168.1.1 in a browser window, Cisco Connect also works fine on my laptop.The only solution I found on this forum is: reset your router and reinstall Cisco Connect.and then every 4 days resetting my router and reinstalling the software?

View 4 Replies View Related

Linksys Wireless Router :: Disable WMM On E2500

Apr 20, 2013

My network consists of a Westel C90-610030-06 DSL modem, Cisco E2500 router and Hawking HWREN100 range extender.My wife has trouble with her IPad connecting to the Hawking.Apple says I need to Disable WMM on the E2500.

View 2 Replies View Related

Linksys Wireless Router :: VPN Connections On A E2500

Jun 26, 2012

I am working with vpn setups for the first time. I would like to be able to connect to a computer on a home network through a linksys E2500 router. I have found alot of documentation on connecting to an external vpn from a computer on the lan side of the router, but nothing on connecting from the outside in. The router does have a static ip address with my internet provider, so I can contact the router from the outside. But makeing the connection to the computer on the other side of the router is where I am missing something or I dont realize that it is not possible. On the LAN side I am using DHCP to assign the address to the computer I want to connect to. Perhaps I need to make it have a static address also? I realize that when I configure the connection from the outside that I need to direct the connection to the remote computer in some way, unless vpn connections are fully passed through the router and the connection issue I am having is with the "inside" computer.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved