Linksys Wireless Router :: Wrt610n / AP Isolation Not Working?
Apr 11, 2012
Using a wrt610n.I am trying to Isolate one of my wireless bands from the rest of the network. I turn on the AP Isolation and I still have access to all of my wired computers. With AP Isolation working will they be able to see the hard drive plugged into the router?I've heard that they can still see other wireless devices, is that true? And if so, can they see others wireless devices on the other wireless band?
View 18 Replies
ADVERTISEMENT
Apr 11, 2012
Using a wrt610n. I am trying to Isolate one of my wireless bands from the rest of the network. I turn on the AP Isolation and I still have access to all of my wired computers.
Questions: With AP Isolation working will they be able to see the hard drive plugged into the router? I've heard that they can still see other wireless devices, is that true? And if so, can they see others wireless devices on the other wireless band?
View 6 Replies
View Related
Aug 3, 2012
I am trying to filter a URL, facebook and it is not working. I have tried rebooting the router and it is still allowing access. I have provided the settings and ranges for PCs.
View 3 Replies
View Related
Sep 14, 2011
I have a router WRT610N and I'm using the FTP option within. The problem is that within my network, I have the cable modem (from the internet provider ) and my router with the ftp server. When I'm trying to access the FTP from outside (internet) with FileZila I get this "Server sent passive reply with unroutable address. Using server address instead."
I 've checked the network config from FileZilla and if I'm using this [URL] in order to get the public IP, I get this : 127.0.0.1
View 9 Replies
View Related
Jan 9, 2012
WRT610N router with v2 firmware stopped working correctly. It loses wired connection via LAN ports.My home network has one PC connected to LAN port 1 and two PC connected via Wi-Fi.Recently unexpectedly the PC with wired connection lost connection.
The symptoms are the following:
- The DHCP local network address is obtained not every time.
- The router (192.168.1.1) not usually responds to ping (returns "host is unreacheable) and I even unable to connect to router's web interface.
- The led for the 3rd LAN port on the front face of router is always on while nothing was ever connected to this port.
- Wi-Fi clients (Windows XP) obtain DHCP address for 30 seconds then report that connection is limited and in a few seconds report that everything is
- The internet for both type of clients is almost not accessible (Wi-Fi is better)
Sometimes (but very rarely the wired connection works fine.
I suppose in my case this is a hardware problem. Can this be repaired of fixed somehow?
View 9 Replies
View Related
Dec 26, 2011
I have a WRT610N (v2) router and I recently updated the firmware to the most current version 2.00.01 build 15. I can no longer set WPA2 security for both bands (used to work just fine). Every time I try to save settings for WPA2 for the 5 GHz band, it tells me it was successful but then displays that the security mode is disabled (and it shows up on my computers list as not having any security enabled. If not, where can I get a copy of the old firmware that worked?
View 8 Replies
View Related
May 24, 2012
I have a Linksys E2000 router on my home network. The router has the newest version of firmware. Every once in a while, wireless clients on my network become "isolated". Here's an example of what happens. I set up a new wireless printer. I can print to the printer wirelessly from my phone, PC's, etc. all fine after setup. I'm thinking everything is cool!! Well after 2 weeks to 1 month this device will become "isolated" so I cannot print to it; it has an IP address, it can ping its gateway, but i cannot ping it from other devices on the same subnet. I know it's not the printer because if i unplug my E2000 and plug it back in, it works fine.
Another example. I have two windows 7 PC's that are on the same home group and i can share files between them. Sometimes it works and other times it doesnt. I can ping my gateway but they cannot ping each other. I would troubleshoot the issue like crazy from the host end, but the second i unplug my E2000 and plug it back in, BINGO they can talk. Something is wrong with how these routers function with hosts in inter-subnet communications.
View 2 Replies
View Related
Dec 16, 2012
I own a E4200 v1 router and recently discovered that wired and wireless devices cannot talk to each other.Their IP address are acquired through DHCP and inside the same network, but cannot talk to each other by any means, such as ping or http connection.I tried switching wired device to wireless and this actually solve the problem. I've searched and seen thread talking about "AP isolation" settings in advanced wireless setting, but there's no such setting page in my router (running on v1.0.5 firmware). I've already disabled any filtering and firewall function on the router, but still no good.
View 1 Replies
View Related
Dec 25, 2009
I purchased a WRT610N router early this month, the wireless network was working completely fine when I first set it up. Today I tried to connect my laptop to my wireless network. The laptop isn't able to connect at all. I also got a Sony PSP which has WLAN on and that saying it cannot detect any access point which would be my router.
View 3 Replies
View Related
Jul 12, 2011
How can I open the Nat for both systems on my single router.
View 2 Replies
View Related
Jul 26, 2011
I was told that this router would push the PoE to the WAP4410N. I hooked the AP up to port 1 and no lights or anything... The network is all cat6, patch cords are cat6 shielded if this matters at all... what am I missing.
View 3 Replies
View Related
Jul 1, 2011
Is it possible to have 2 hard drives connected to a WRT610N perhaps connected through a USB hub?
View 1 Replies
View Related
Dec 20, 2011
I have the Linksys WRT610N wireless router and would like to know if it is possible to block all domains ending in .XXX? The access restrictions let you type in a 'specific' URL, but using a generic domain name doesn't seem to work. I basically want to block all access to any URL that ends in .XXX.
View 5 Replies
View Related
May 13, 2012
I just bought a certified refurbished router. The model is WRT610N-RM. Where's what I've done:
1. Downloaded newest firmware from the site using old router, Then disconnected. Connected a lan cable to the new router. Powered up the router. Held down reset untill the light blinks. Went to the browser and typed 192.168.1.1. Entered password to go into router and upgraded firmware. 2. 5 Ghz Settings: Went to Wireless menu. Selected "manual", mode is "mixed" (If i chose N only for 5 Ghz, then It won't save my setting for internet security. Instead it will be "disable" no matter what". The rest was default. SSID is enabled. Then I set up the 2.5 Ghz. I have 3 other computers with N wireless card. Some others have G, however when I viewed available networks, I only see the 2.4 Ghz ssid. I tried to reboot and unplug power for 10 seconds, but no luck seeing the 5 Ghz.
View 6 Replies
View Related
Nov 15, 2011
ive tried all types of things i read online and it is stuck on moderate no matter what i do, im hooked into router directly, when i hook directly into modem it switches to open.
View 2 Replies
View Related
Jun 26, 2012
I am finding it impossible to set up port forwarding. No matter what I do I remain completely stealthed when I do a port probe via [URL]... The only way I seem to be able to open a port is if I enable remote management. When I do that, whatever port I specifiy as the remote management port is then fully open. Obviously, I can't leave a port exposed like this and, anyway, I need to open multiple ports for my purposes.
View 9 Replies
View Related
Mar 18, 2012
I have had no problems with my WRt610N fo 2 years. Yesterday a problem occured and today again. Namely, I opened my laptop (the lid) and suddenly it could not see my network (SSID) among the rest of the neighbouring ones. The WiFi indicator in the tray showed the yellow "!". Since I have another (secondary) router wired to the primary (WRT610N) I tried and succeeded to connect to it (same SSID, but type "g").
Today the same situation. This is the straneg thing - if I 1st connect to the "g" router after a while the WIn7 reports my SSID being of type "gn" meaning it now sees the primary WRT610N. If I switch off the secondary the netowork is maintained by the primary router showing "n". It seems like my laptop cannot see my router (but can see all other networks) until it 1sr connects to the secondary, and afterwards it sees the primary router and can stay with it.
View 1 Replies
View Related
Feb 4, 2010
Is LinkLogger the only option for reading logs on the WRT610Nv2? I read about Linksys's own software called LogViewer 1.14 but I can't find it.
View 3 Replies
View Related
Jun 12, 2012
I've been really stumped when I decided to start using xbox live. When ever I try to join my friends party I am slammed with a NAT error. For years now I have not been able to forward ports at all. Any port checkers come back with unable to contact your router.I am fairly certain its the router because, I directly plugged my 360 into my modem and everything worked like a charm.I've read on a similar post found here "Similar post" that updating the firmware might fix the issue?
View 9 Replies
View Related
Dec 27, 2011
My WRT610n went out today for no apparent reason.All of my other peripherals are still running, but the router won't turn on. I've tried different transformers, outlets and powerstrips, with no luck -- no power. I've also tried a hard reset on it, with no luck.
View 3 Replies
View Related
Feb 22, 2011
How is it possible to block facebook (or other sites) on WRT610N router, given that I have already set up Internet Access restrictions based on day/hour ?
View 9 Replies
View Related
Feb 17, 2010
Any success with a recent vintage Macbook Pro connecting to the 5.8Ghz channel on a WRT610N. I can connect with the 2.4 channel without a problem but I cannot maintain a connection on the high channel. Linksys support told me that the hardware was not compatible with the high channel.
View 3 Replies
View Related
Oct 10, 2011
To connect my new "smart tv" with my wireless linsys WRT610N, smart tv ask to take off all protection such as firewall and antivirus. Doing so, I cannot connect my laptop with my router. Is there a solution to connect both at the same time?
View 1 Replies
View Related
Sep 10, 2009
I read an earlier posting about an issue between SPI on the latest WRT610N Version 1.0 firmware and a user's Apple TV. This pointed me to a "solution" to a perplexing problem I was having.
I have 4 machines, 3 connected via WiFi and 1 on one of the wired ethernet ports. I also have 2 Apple Airport Express units for audio streaming as well as 2 iPhones connected wirelessly.
Now for the symptoms, which are all new since updating to firmware ver.1.00.03.15:
1. The WiFi machines see the Airport Express units and can stream audio to them. However, the iPhone Remote app has trouble staying connected to iTunes running on any of these machines. A router reboot is a temporary fix, but connection is eventually lost again.
2. The wired machine cannot see the Airport Express units, nor can the Remote app pair with iTunes on that machine. It's as though no Bonjour-related functions work. Here, a router reboot also provides a temporary fix, but one that lasts only minutes.
Based on that prior post, I disabled SPI on the router and, lo and behold, the wired machine suddenly sees all Airport Express units and can pair with the iPhone Remote app!
I was going crazy, verifying that I was not having Windows Firewall issues, that there wasn't an incompatibility with Windows 7 (which I'm running on all), that this wasn't a Homegroup incompatibility of some sort, that Bonjour was up to date, etc. Only turning off SPI fixed the problem entirely.
So, Linksys ...Any firmware bug fix in the works for this? Can I safely go back to the prior firmware update without security or function concerns? If so, where can I get my hands on the older firmware file?
WRT610N Version 1.0 running 1.00.03.15
View 9 Replies
View Related
Oct 3, 2011
i used my 610N v2 for 2 years and recently i upgraded my network from 100mb to fiber 500mb , however, if i directly plug the lan cable to my computer , i can get full speed , but with 610N, the speed is limited to 130 for both upload and download .i had already upgrade my firmware and did factory reset, none of them work. Is it the limitation of the router ?
View 1 Replies
View Related
Jun 30, 2011
For some reason, I have been trying to use QOS for several network related jobs (VPN, streaming). It would seem that when QOS is enabled and the appropriate ports are set which a high priority, the speed of my connection drops to a crawl. When I disable QOS, I'm flying again. I have confirmed ports, and protocol types (TCP or UDP) and nothing seems to work.
View 2 Replies
View Related
Jan 16, 2009
I just purchased a WTR610N and when I connect to the admin interface over SSL it gives me a cert that expired on 12/31/1970. I updated the firmware and that didn't change anything. How to get it to use a valid cert?
View 9 Replies
View Related
Dec 28, 2011
I want to connect one "wrt610n router" to modem directly through Ethernet cable and when i connect both of them every thing is working fine and iit gives proper internet connection through WLAN [code] But, when i tried to connect "second WRT610N router" through "first one WRT610N router" through LAN_cable(cat 5) then second router do'nt provide(give) internet connection second router ip-- 192.168.1.5
View 4 Replies
View Related
Oct 22, 2011
how to set up my router settings/port forwarding to be able to use Wake on Lan with Depicus here is what I currently have:DHCP Reservation with the IP Address of my computer (192.168.1.xxx) and the MAC address xx:xx:xx:xx that I retrieved by doing ipconfig /all in the cmdMy Router address is 192.168.1.1 and the submnet mask is 255.255.255.0my DDNS service is disabledIn the Security tab, I unchecked Filter anonymous internet requestsIn Applications and Gaming, under single port forwarding, I have port 7 to 7, Both TCP and UDP, forwarded to the IP address of my computer 192.168.1.xxx and it is enabledMy network card is configured already, enabling WOL in the card's properties.Now when I use Depicus, I enter the MAC, my external IP address which I got from myipaddress.com, subnet mask I use 255.255.255.0, I select Internet, and then the remote port I use is 7,Doing that, nothing happens at all. however, I can easily wake up my computer if I am connected to the same local network at home.
View 3 Replies
View Related
Nov 4, 2012
Firmware Version: 2.00.01 build 15 Sep. 13, 2010
Firmware Verification: dcf86b5724049cb145f571a4bc21a17d.
I was able to connect using Gnome Epiphay Web Browser v 3.4.1 and found no problems on the WRT610N router.So-o-o Cisco, what do you recommend I do, seeing as how there is no later firmware to apply and nothing to configure that I can see.
View 3 Replies
View Related
Mar 26, 2012
I am using Window 7 and the WRT610N router. I got a bufflao 1 TB USB harddisk connected to the router.My PC can access to the Harddisk. However, but my pc showing the USB harddisk is full. I checked, there are less than 200GB file on the disk. why is that?
View 1 Replies
View Related
Apr 15, 2012
What do I have to do to be able to access the USB drive I plugged into my WRT610N from anywhere, on any computer?
Currently, I just plugged it in, went to \WRT610N in windows explorer, and mapped it as a network drive, adding a few files to try out.
So what do I need to do now to access it from any computer that has internet?
View 1 Replies
View Related
Nov 24, 2009
Any upload somewhere of this version of wrt610n firmware! I really need it cause I have to downgrade to that one in order to use my 1TB hard drives.
View 6 Replies
View Related
