Network Is Connected But Nothing Is Loaded
May 6, 2012
I have a small network, that consists of a wireless router, a switch, three wired pc's, a couple of wireless pc's and an xbox.I have a switch wired to the router. There are three pc's (2 with XP and 1 with vista) and a xbox connected to the switch. All three pc's work fine as long as the xbox is turned off. When I log on with the xbox, one of the pc's (vista) refuses to work on the network.The network and sharing center shows I have a connection to the internet, but it won't load any pages or allow me to connect to the other pc's either.
View 6 Replies
ADVERTISEMENT
Jan 6, 2012
I am having a tough time connecting these two routers wirelessly, i had connected a WRT54G Linksys software to the WRT54G DD-WRT router with no effort. But these two will just not connect.
View 1 Replies
View Related
Oct 26, 2011
url is not valid and cannot be loaded
View 1 Replies
View Related
Feb 28, 2012
ASDM cannot be loaded. Click OK to exit ASDM. Server returned HTTP response code: 503 for URL...
I'm attempting to access the ASDM externally (where x.x.x.x is the external IP). I was able to access 3 days ago just fine. So far, I've found suggest a reboot.
ASA Version 8.2(1) - I think the ASDM version is 6.2
View 11 Replies
View Related
Apr 25, 2013
Is it possible to have a license loaded on an AIR-CT5508-HA-K9 in order to have it working as a stand alone controller?
View 4 Replies
View Related
Jan 11, 2012
2950 switch has a IOS on flash , but i would like to set the swith like...
1. switch IOS to be loaded from TFTP server .if it fails
2. Loaded from local flash IOS1 , if it fails
3. IOS loaded from local flash IOS2.
does 2950 switch support this feature.
View 2 Replies
View Related
Sep 24, 2012
I have a cisco 5508 WLC that I have setup WebAuth on and trying to install the certificate on. I have generated the csr and gotten my cert from Verisign (X.509, server platform=apache). I have followed the instruction via the cisco documentation url...I found an error in uploading and find out how to encrypt mykey: url...
I am also having exactly the same issue with a certificate from Thawte. I followed the unchained guide and have tried both with and without a password in the initial step key generation step, requesting a new cert each time. As with Jeensernchew's issue there are no errors in OpenSSL but when uploading the cert to the WLC get the following error. [code] The WLC is running version 6.0.196.0. I am using OpenSSL 1.0.0 29 Mar 2010.
When I requested the cert from Thawte I was asked to specify the device type, I chose Cisco, but as all the work and conversion is being done by OpenSSL, should I have chosen differently? When I do this I can load the cert in the 5508, but the controller fails and doesn't allow that VLAN or config access to the wireless network. I am at a loss of why I can load and it not work. I have verified my hostname and password and those are good.
View 1 Replies
View Related
Mar 24, 2012
I already have large deployment add-on license. I also have 3 ACS Servers. Now, my primary ACS server is now up and my two secondary ACS server will be put up soon.
Just want to ask, when should be the large deployment add-on license be loaded? Can I load it to my primary ACS server eventhough my secondary servers are still not up? Or should I load it to my primary ACS server when my two secondary servers are already up?
View 3 Replies
View Related
Aug 14, 2011
I'm using a RV082 and have about a dozen users on my network.Occasionally, when a user is accesssing a website like yahoo.com, twitter.com, cnn .com, etc, the web page only loads half way. Most often the page is missing stylesheets and/or images. Called Cisco support and they adjusted the MTU size to 1492 from 1500.Have a looked at the bandwidth report from my ISP and it shows nothing out of the ordinary, no spikes or surges in d/u. Have set LAN port to high priority, 100 Mbps, full duplex.. Seeing an error count around 327282.. which I don't understand.Why sites only partially load using this router?
View 1 Replies
View Related
Jul 23, 2012
Can a C3560-24PS switch with 32 MB flash be loaded with IOS 15? Will it be able to execute the code and function properly?
View 2 Replies
View Related
Apr 7, 2013
My daughter bought a Dell Optiplex 745c from a company who is replacing their cmputers. This particdular computer does not have any drivers loaded for the installed NIC card, so te machine will not talk to the intenet. Are the drivers in the 745 and the 755 the same?
View 1 Replies
View Related
Oct 13, 2012
Recently I changed our default gateway from a pair of PIX515 to ASA5510. Since I changed the gateway anyone connecting to our wireless VLAN/network who tries to access the Internet may or may not get a page load. If the page loads it is extremely slow and sometimes the browser page indicator will just spin like it is loading. It's not our access points, if attach an ethernet cable to my laptop and put my switchport in the wireless VLAN I experience the same problem. DNS resolves OK, ping responses are consistent with no drops and access to any internal resources are good. All other LAN VLANs/networks work just fine, it's just Internet access on the wireless VLAN. I see the correct traffic flow in the ASA packet capture. Anything in the ASA Packet inspection related to wireless networking that could be blocked? Is there a way to check for a routing loop possibly?
View 2 Replies
View Related
Apr 13, 2011
My system problem is after starting the computer within 5minits network services are disabled and network path not connected but communication is working when i am testing the ping command.
View 1 Replies
View Related
Jun 1, 2012
I connect to my network and the at the top it says "unidentified network, no Internet access". I've turned off and reset my modem and my computer.
View 4 Replies
View Related
Dec 7, 2012
The issue i was having is when i connect to 192.168.50.* network i cannot seem to ping or connect to 192.168.51.2 (esxi host1) and 192.168.51.3 (esxi host2) and also free nas device i.e 192.168.52.2. i can only connect to these devices if i ping the 192. 168.50.1 from both the esxi hosts and also from free nas. Everything starts working if i ping from the esxihosts & Freenas device to 192.168.50.1.
f i connect to the hp procurve switch i can ping the hosts fine from the switch not when i connect to Draytek Router i.e 192.168.50.1 unless i run a ping from esxi hosts and free nas device then everything starts working.Here is my network setup for my ESXI home lab.
I have Draytek Vigor 2800 Router with ipaddress 192.168.50.1 (This Router is Downstairs and connected to DSL Line) and another Router with Firmware flushed with DD-WRT and IP address for this is 192.168.50.2. (this router is in upstairs labroom and is connected in Wireless Bridge Mode to Draytek Router Downstairs)
There is a HP Pro curve Switch 2610-24 with IPaddress of 192.168.50.3 and has VLAN's configured on this switch.The VLAN's are : VLAN10 is esxi vlan and ipaddress is 192.168.51.1 and vlan20 is storagevlan and ipaddress is 192.168.52.1 and vlan 30 is internet vlan and ipaddress is 192.168.50.3 (Switch Address).Port 24 is untagged to vlan 30 i.e internet vlan and connnected the port to dd-wrt router lan port. I have untagged ports 1 to 5 to vlan10 i.e esxivlan and connected esxi host's 1 & 2 to ports 1 and 2 respectively and connected freenas device i.e storage to port 6 which is untagged to vlan20 i.e storagevlan
IP Routing is enabled on the switch and ip route 0.0.0.0 0.0.0.0 192.168.50.2 and Default gateway on the switch is 192.168.50.1.
On the Draytek router i have configured a static route for 192.168.51.0/24 and Default Gateway is 192.168.50.3 and another static route 192.168.52.0/24 and default Gateway is 192.168.50.3
View 19 Replies
View Related
Mar 31, 2011
I detected the ad-hoc network on my other computer. I connected, but yet when I went into firefox to surf the web, there was no internet connection, and it didn't work.I have already enabled Internet Connection Sharing on the host computer. What can be wrong? The purpose of creating this ad-hoc network on the host computer is to share internet connection on several computers in my house.
View 14 Replies
View Related
Jun 10, 2011
I am having issues with trying to change my network from private to home on windows 7 home edition. In network and sharing centre it is saying im not even connected to a network when im connected to my modem. This is what it comes up with when I run ipconfig:
Wireless LAN adapter Wireless Network Connection:
Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::4c4d:935a:a627:cd6c%12
[Code].....
View 8 Replies
View Related
Apr 1, 2011
I get the message on my desktop computer 'network cable not connected', while it's connected. The service prividers have a connection to the modem and I have tested the modem elsewhere and it works fine, so modem is not the problem. I thought the network cable was the problem, bought a new one, worked for 5 minutes then the message appeared, lost the internet connection, the problem persist, cable not the problem. Tried inactivating, then activating the connection to the local network, the problem persists. Tried sytem restore, still not working, disabling the firewall if it blocks the connection, still not working. Could the networks card be the problem? I updated drivers to the network card, didn't work, bought a new card, the problem persist, then finaly got a tip from someone to pull out the electric cable from the computer, then put it back again, the problem was solved. I tried this, but still have the problem.
View 2 Replies
View Related
Mar 5, 2012
I have two PCs at home, The first one gets a wired connection from ISP, and has the internet. The second gets a wired connection from my first PC (through another network card). I recently had to reinstall windows 7 on my first pc, and It seems i cant get internet to work on my second pc. The computers can ping each other, and my second pc shows as "connected", yet has no connection to the internet (and cannot ping to anywhere, cept my first pc). My second pc is running windows XP and before I reinstalled the first PC's windows everything was fine, and I didnt change anything on my second pc either (well, changed everything back anyway). IP configs seem to be fine.
View 4 Replies
View Related
Jun 12, 2011
I am recieving full wireless signal stregth and says that i am connected but my computer cant identify the network and wont connect to the internet. I have tried everything the diagnosis has said to try but non of it has worked thus far.
View 1 Replies
View Related
Sep 22, 2011
I had cable internet hooked up. i was supposed to get wireless and they installed a wireless modem. when the guy tried to turn it on he said my wireless was turned off on my computer and asked me how to turn it back on. i know nothing about computers so he just left a phone line for me to connect with. i need to know how to turn my wireless back on.
View 2 Replies
View Related
May 30, 2011
Bought wifi from virgin and cannot connect to net when network connections say i am connected.
View 1 Replies
View Related
Jan 24, 2012
Santa got a second-hand acer mini-laptop for my daughter this last Christmas and she accidentally pour some coke in it, I took it to the shop and I had to pay to repair it; when I got it back, the first thing is that originally it has Windows 7 and now XP, I thought it was ok, but even though I use my network passkey and everything, it quickly connected to the network showing internet access but when I open IE, it shows a message to diagnose connection problems, I run the repair wizard and nothing, but all the time it is showing that the connection is working, will I need to take it back to the shop or is there something I can do?
View 14 Replies
View Related
Jun 25, 2011
I'll try and explain this the best that I can. I'm currently running a Sony Vaio VGN-NW270F laptop with Windows 7. I'm using a WRT54G2 v1.5 router for my internet connection. Last Wednesday, I tried to go online, but my wireless connection for my home network came up as "limited connectivity", even though there was a 5-bar signal strength. Since then, it has identified and connected to my home network, but displays "no internet". On startup, however, it connects, but then promptly disconnects, and I experience the same issue. I can go online using my parents' laptop, my 3DS, and my Wii, so I assume it's an issue with my computer rather than my router.
Additionally, I have tried using an ethernet cord to go directly into my computer - no luck.I have also done 2 system restores to late May - still no luck.I have uninstalled/reinstalled the necessary drivers - no luck.The only thing out of the ordinary that may have contributed to this situation is that on the day when I started having this problem, a notification saying that my parents' computer's IP address was the same as another on the same network. I have NO idea what that means, nor do I know how it happened, or how to resolve it, if needed
View 6 Replies
View Related
Aug 22, 2011
I am ressurecting an old pc using windows xp service pack 3. I can connect to my network but not the internet. I have tried several different solutions to no avail. If I connect to the local openzone I can connect, but not through my network. I am using a Belkin wireless card and the modem/router is a dlink 2740b
View 1 Replies
View Related
Nov 10, 2012
I know about the issue of disabling default gateway... but the thing is on my Windows Vista, when i click on advanced setting for tcp/ip 4, there is no box ticks for disabling it. I don't know why.
View 3 Replies
View Related
Sep 13, 2012
I am running an ethernet cord from my xbox 360 to my Acer Aspire TimelineX 3820TG-3022 Laptop Computer. I am attempting to run ICS in order to share the connection to my xbox. The problem comes when I attempt to plug in my ethernet cord to the computer, and nothing happens.
Here is a screenshot of what the port says / my network adapter setup: 33a7c93a4c607756f9219a95a7207a7d.png It's a Atheros AR8151 PCI-E Gigabit Ethernet
I have tried sharing the connection to my xbox via another laptop, and it has worked. Power saving mode is disabled in the port in the device manager, and I have no clue what is going on.
View 2 Replies
View Related
Apr 13, 2012
I have tried everything (to the best of my knowledge). I have tried stopping certain programmes from launching from start up (using msconfig.exe) and deselecting unnecessary programmes.The internet works in Safe Mode with Networking and I have run Malwarebytes Anti-Malware but to no-avail.The router is working because my iPad and other PC's are connected to the same network and are all operating perfectly. I am running on a wireless network and tried an ethernet connectinon but again noI have seen on a few forums that when people provide their HijackThis logs.[CODE]
View 1 Replies
View Related
Feb 11, 2013
Suddenly, one of my laptops is unable to access the internet via my apartment complex's community wifi. It will connect to the network, but times out when trying to access any webpages. All other devices are able to connect to the network and access the internet with no issue. This network is unsecured, so no password is required to access.
ISP: Comcast
Router: Unknown
Anti-Virus/Firewall Software on PC: Avast, Windows Firewall
Here's my ipconfig/all info:
Windows IP Configuration
Host Name . . . . . . . . . . . . : dorothea-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[code]....
View 10 Replies
View Related
Aug 18, 2012
I can't connect suddenly to the Internet. I tried both Wired and Wireless connection to my laptop. The icon is showing that my laptop has detected the connection but has no internet access.Showing in my screen is: Connected to Network. IPV4 no internet access, IPV6 no internet accessI tried using my iPhone to connect via the wireless connection and I could get browse the Internet with it.. hence i'm sure the problem lies with the laptop.
View 10 Replies
View Related
May 9, 2012
I have a pc connected to a router through the pc's wireless adapter. I have an ipad and laptop that are out of range of the wireless router. Am I able to create an ad hoc network or something of the sort that will enable me to connect to my pc and use the internet through the pc?
View 1 Replies
View Related
Aug 30, 2012
How to discover how many routers are withing a network using ip config or simple windows tool /command
View 1 Replies
View Related
Apr 1, 2011
I have a computer that can no longer connect to the internet whether through the wireless or wired directly to the router. The computer will recognize and connect to the network locally. Two other computers are on the network and they are connect just fine.
[code]...
View 13 Replies
View Related
