Cisco Wireless :: Possible To Have License Loaded On An AIR-CT5508-HA-K9
Apr 25, 2013Is it possible to have a license loaded on an AIR-CT5508-HA-K9 in order to have it working as a stand alone controller?
View 4 Replies
ADVERTISEMENT
Cisco Wireless :: Clarification On WLC License Files LIC-CT5508-UPG / PAK
Jan 28, 2013Basically I need to upgrade the license for Base-AP count to add 100 more AP's however my vendor has provided hardcopy of license as below:
-LIC-CT5508-UPG
-AIR-CAS-3KC-K9
-AIR-WIPS-AP-5
-L-NCS-1.0-100-ADD
My understanding is rigister LIC-CT5508-UPG/PAK number on cisco site and get .lic file however what is the use of other PAK where do i register this files with? Moreover , we do have NCS , MSE in place which is centralised devices.
Cisco AAA/Identity/Nac :: ACS 5.x Large Deployment Add-on License / When Should Be Loaded
Mar 24, 2012I already have large deployment add-on license. I also have 3 ACS Servers. Now, my primary ACS server is now up and my two secondary ACS server will be put up soon.
Just want to ask, when should be the large deployment add-on license be loaded? Can I load it to my primary ACS server eventhough my secondary servers are still not up? Or should I load it to my primary ACS server when my two secondary servers are already up?
Cisco Wireless :: Configure HA Between AIR-CT5508-100-K9 And AIR-CT5508-25-K9?
Jan 28, 2013Whether we can configure HA between AIR-CT5508-100-K9 and AIR-CT5508-25-K9. Or we should require this AIR-CT5508-HA-K9 ?
View 6 Replies View RelatedCisco Switching/Routing :: PIX515 To ASA5510 - Tries To Connect To Wireless Never Gets Page Loaded
Oct 13, 2012Recently I changed our default gateway from a pair of PIX515 to ASA5510. Since I changed the gateway anyone connecting to our wireless VLAN/network who tries to access the Internet may or may not get a page load. If the page loads it is extremely slow and sometimes the browser page indicator will just spin like it is loading. It's not our access points, if attach an ethernet cable to my laptop and put my switchport in the wireless VLAN I experience the same problem. DNS resolves OK, ping responses are consistent with no drops and access to any internal resources are good. All other LAN VLANs/networks work just fine, it's just Internet access on the wireless VLAN. I see the correct traffic flow in the ASA packet capture. Anything in the ASA Packet inspection related to wireless networking that could be blocked? Is there a way to check for a routing loop possibly?
View 2 Replies View RelatedCisco Wireless :: AIR-LAP1242G-E-K9 Does Not Work With AIR-CT5508-K9
Mar 11, 2012we do have a site where we need to deploy AIR-LAP1142N-E-K9 and AIR-LAP1242G-E-K9 APs. We have two AIR-CT5508-K9 controllers with SW version 6.0.188.0.AIR-LAP1142N-E-K9s work okay, as expected, we do not have any problems with them.However AIR-LAP1242G-E-K9s do not, there is a problem with establishing CAPWAP tunnel with the controller.The AP is seen on the controller for a while, with 0 time up-time, cannot change any settings on the AP via controller, and after a while it disapears from the controller, apears again and this repeats.
The APs and controllers are connected to the LAN campus.Controllers via two 1G links configured as Etherchannel to WS-C6506-E VSS switch with s72033-ipservicesk9_wan-z.122-33.SXI1.bin on it.APs to WS-C3750G-48PS with c3750-ipbasek9-mz.122-50.SE2.bin on it. 3750 is connected to the C6505 via two 1G links configured as Etherchannel.Below I copied the log I captured on 1242 and the controller. Highlighted ones are the ones which I think might bring a clue.
I performed some troubleshooting steps.
- As we have some other controllers available over WAN, I tested the 1242 AP with 2100, 4400 and also with the same model AIR-CT5508-K9 with SW version 6.0.188.0 over WAN and this worked always okay.
- I wanted to be sure that I eliminate any kind of out of sequence packet issue, so I brought down all redundancy L2 links so that the L2 path from the AP to the controller was only through one leg links.
- I also brought the second controller down to eliminate potential issue with having two of them up.
- The AP gets its IP from DHCP configured on the C6506 switch, I am always able to ssh to AP, so the IP connectivity does not seem to be an issue.
- I have more 1242s, all behave in the same way. I also connected them to some other 3750 switches we have in the campus, always the same.
- As this seems to be maybe a kind of ssl issue, I tried to play with controller settings, like enabling Accept... options under Security/AP Policy,but this did not work.
- I also tried to reboot the controller, no improvement.
- The APs came from the factory, so in the beginning everything was factory default in them. They were always able to download the image from the controller in the very initial phase. I still do have some of them untouched, so I can perform any troubleshooting steps with the fresh one.I can reproduce this, can also send debugging logs if needed.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
This Discussion has been converted into document:- [URL]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
AIR-LAP1242G-E-K9 10.0.13.28 log
*Mar 1 00:00:05.922: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:07.536: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot1 1Radio 0
*Mar 1 00:00:07.672: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 304 messages)
[code]....
Cisco Wireless :: CT5508 / RF Group Members Not Seeing Each-other
Nov 28, 2011I've two wlc model CT5508 version 7.0.116.0. They are working fine except for the RF grouping part. When I look at the RF Group members part in the configuration, I can see only one wlc (the one I'm connected to). If I connect to the second one, in the same part, I've just one controller (so the second one..). I tried to restart the algorithm but no change. Each controller is configured with Group Mode set to auto, and their respective role are auto-leader...I tried to change the RF group name on both wlcs, but it didn't fix the problem. When I look at the logs, there is one which appear quite often:
*emWeb: Nov 29 10:32:07.764: %LOG-6-Q_IND: dtl_arp.c:2581 ARP input q exceeds limit. Current val = 50 [...It occurred 38 times.!]
Cisco Wireless :: WS-C3750G With AIR-CT5508-50-K9 / Unable To Upgrade
Oct 3, 2012I have issue about Wireless controler , i have 2x WS-C3750G-24WS and 1x AIR-CT5508-50-K9 , i have max 50 access point license and i can't upgrading because WS-C3750G-24WS is and of life , can i use AIR-CT5508-50-K9 with 3750G to work together? , mobility and everything....
View 1 Replies View RelatedCisco Wireless :: Want To Connect To Vlan Controller AIR-CT5508-K9
May 6, 2013i received access point types AIR-LAP1252AG-E-K9, which i want to connect to my wlan controller AIR-CT5508-K9. Update from IOS etc. is working fine. Also all access points are recognized by the controller.We got the AIR-LAP1252AG-E-K9 with two antenna versions.
View 1 Replies View RelatedCisco Wireless :: AIR-CT5508-K9 - Unable To Join AP To Controller
Nov 7, 2012I’m having a problem of joining new Aps( Ari-ap1242G-E-k9 ) to the following wireless LAN controller. WLC details as follows,
Model No - AIR-CT5508-K9
Software Version - 7.0.116.0
AP Model - ARI-AP1242G-E-K9
AP console logs attached in Error.jpg file
Cisco Wireless :: Power Draw / Usage For AIR-CT5508-K9?
Apr 17, 2012What is the operating and/or peak power consumption (in kW) of a 5508 WLC with redundant power supplies?
The below power details are from the 5508 datasheet which lists 115 W as the maximum draw (0.115 kW) however this seems a bit low, is this right?
Input power: 100 to 240 VAC; 50/60 Hz; 1.05 A at 110 VAC, 115 W Maximum; 0.523 A at 220 VAC, 115 W Maximum; Test Conditions: Redundant Power Supplies, 40C, Full Traffic. Heat Dissipation: 392 BTU/hour at 110/220 VAC Maximum Cisco 5500 Series Wireless Controllers Data Sheet: [URL]
Cisco Wireless :: Access Point And IPhone AIR-CT5508-K9 / Timed Out
Apr 1, 2012 i have setup of following AIR-CT5508-K9 controller and around 20 AP spread all over the place, two SSID one guest and one for my employees.
the one for guest has web authentication, using Iphone every 2 to 3 minutes it time out and i have to reenter the credentails for web authentication.
Cisco Wireless :: AIR-CT5508-K9 - VLAN Mapping Missing In LWAP
Mar 11, 2013I am running big wireless network, with 20no of 5500 with 7.0.116.0 version. I have more than 20,000 AP's. If i add some config in primary controller or do some changes or reboot all the AP's are moving to backup controller. this doesn’t have any problem, but many AP's which moved to backup controller are losing VLAN mapping. This happens every time. Primary --> backup, backup --> primary. Both controllers have same vern...same config etc..
AP model: AIR-LAP1252AG-A-K9
Controler model: AIR-CT5508-K9
Cisco Wireless :: AIR-CT5508 - Error (2048) Found In Fsck Check
Sep 4, 2011I get the following error message at startup.
---
Error (2048) found in fsck check - attempt to repair.---
What is the implication of the error message 106007? Do I have no problem continuing to be left out of this error?
Cisco :: Access Point (AIR-AP1141N-E-K9) Can Work With Wireless LAN Controller (AIR-CT5508-25-k9)
Feb 24, 2011I want to confirm if the access point (AIR-AP1141N-E-K9) can work with the Wireless LAN Controller (AIR-CT5508-25-k9)
View 2 Replies View RelatedCisco Wireless :: AIR-CT5508-K9 - AP01 Connection Bounce Due To WLAN Session Timeout
Jul 30, 2012When a client connecting to a specific AP (example AP01), after every 1800 sec uptime it will reconnect and join other unit AP (example AP02)Both AP physically installed distance is around 6 meters from each other. I conduct the testing where i get myself sitting in middle between these two APs.
01. If i disable settsion timeout this feature, or setting the seconds become higher value, what's the performance and security impact? Is it recomend to change the default 1800 seconds session timeout?
02. Is there anyway i can tweak on WLC controller to prevent the client after session timeout then associate with another AP. This will lead major performance impact as the client woudl possibility connect to the weak signal AP and effect on the performance.
These are the details for reference:Client detail
- Dell DW1520 wireless-N WLAN card, with firmware version 5.100.235.12
- CCX version 4 supported
- Layer 2 security is WPA2 personal with PSK.
- wireless radio an
Controller detail:
model is AIR-CT5508-K9
software version is 7.2.110.0
Url Is Not Valid And Cannot Be Loaded?
Oct 26, 2011url is not valid and cannot be loaded
View 1 Replies View RelatedCisco Firewall :: ASDM Cannot Be Loaded ASA 8.2
Feb 28, 2012ASDM cannot be loaded. Click OK to exit ASDM. Server returned HTTP response code: 503 for URL...
I'm attempting to access the ASDM externally (where x.x.x.x is the external IP). I was able to access 3 days ago just fine. So far, I've found suggest a reboot.
ASA Version 8.2(1) - I think the ASDM version is 6.2
Network Is Connected But Nothing Is Loaded
May 6, 2012I have a small network, that consists of a wireless router, a switch, three wired pc's, a couple of wireless pc's and an xbox.I have a switch wired to the router. There are three pc's (2 with XP and 1 with vista) and a xbox connected to the switch. All three pc's work fine as long as the xbox is turned off. When I log on with the xbox, one of the pc's (vista) refuses to work on the network.The network and sharing center shows I have a connection to the internet, but it won't load any pages or allow me to connect to the other pc's either.
View 6 Replies View RelatedCisco Switching/Routing :: Set 2950 IOS To Be Loaded From TFTP
Jan 11, 20122950 switch has a IOS on flash , but i would like to set the swith like...
1. switch IOS to be loaded from TFTP server .if it fails
2. Loaded from local flash IOS1 , if it fails
3. IOS loaded from local flash IOS2.
does 2950 switch support this feature.
Cisco :: 5508 Web-Auth Cert Crashing When Loaded
Sep 24, 2012I have a cisco 5508 WLC that I have setup WebAuth on and trying to install the certificate on. I have generated the csr and gotten my cert from Verisign (X.509, server platform=apache). I have followed the instruction via the cisco documentation url...I found an error in uploading and find out how to encrypt mykey: url...
I am also having exactly the same issue with a certificate from Thawte. I followed the unchained guide and have tried both with and without a password in the initial step key generation step, requesting a new cert each time. As with Jeensernchew's issue there are no errors in OpenSSL but when uploading the cert to the WLC get the following error. [code] The WLC is running version 6.0.196.0. I am using OpenSSL 1.0.0 29 Mar 2010.
When I requested the cert from Thawte I was asked to specify the device type, I chose Cisco, but as all the work and conversion is being done by OpenSSL, should I have chosen differently? When I do this I can load the cert in the 5508, but the controller fails and doesn't allow that VLAN or config access to the wireless network. I am at a loss of why I can load and it not work. I have verified my hostname and password and those are good.
Cisco Switching/Routing :: RVO82 Web Pages Not Fully Loaded
Aug 14, 2011I'm using a RV082 and have about a dozen users on my network.Occasionally, when a user is accesssing a website like yahoo.com, twitter.com, cnn .com, etc, the web page only loads half way. Most often the page is missing stylesheets and/or images. Called Cisco support and they adjusted the MTU size to 1492 from 1500.Have a looked at the bandwidth report from my ISP and it shows nothing out of the ordinary, no spikes or surges in d/u. Have set LAN port to high priority, 100 Mbps, full duplex.. Seeing an error count around 327282.. which I don't understand.Why sites only partially load using this router?
View 1 Replies View RelatedHome Network :: Connect WRT54G DD-WRT Loaded To A DLINK DIR-655
Jan 6, 2012I am having a tough time connecting these two routers wirelessly, i had connected a WRT54G Linksys software to the WRT54G DD-WRT router with no effort. But these two will just not connect.
View 1 Replies View RelatedCisco Firewall :: Difference Of VPN Plus License And Security Plus License ASA 5520
Oct 16, 2012What's the difference between VPN Plus license and Security Plus license. I have new 5520 shipped with VPN Plus license.Also does it require a seperate license for Anyconnect for Mobile and AnyConnect Essentials.
View 1 Replies View RelatedCisco :: Installation PI1.2 Basic License With LMS4.0 License For 100 Devices
Apr 3, 2013I’m stuck in some problem with installation of LMS4.0 in customer site.
- we purchase a LMS4.0(CWLMS-4.0-100-K9) but couldn’t install it on Windows server 2008 R2 64bit because those things don’t support each other.
- I need to upgrade the LMS4.0 to LMS4.2 that is supporting Windows server 2008 R2 64bit.
- So, I ordered following items via product update tool (url...) [code]
- In this status, how to install LMS4.2 with license for 100 devices? If I install R-PI12-BASE-K9 first, can i enter a licese for 100 devices for CWLMS-4.0-100-K9 into PI1.2?
Cisco Switching/Routing :: Can C3560-24PS Switch With 32 MB Flash Be Loaded With IOS 15
Jul 23, 2012Can a C3560-24PS switch with 32 MB flash be loaded with IOS 15? Will it be able to execute the code and function properly?
View 2 Replies View RelatedCisco :: Change Management IP Of AIR-CT5508
Sep 25, 2011I want to change the management IP of our wireless controller, I have 5 LAP1142N connected to this controller.
I have a few questions before I will do this task.
1. If I change the management IP, will the controller need a reboot?
2. Will the AP's automatically sync with the new management IP?
3. Do I need additional configuration on the AP's?
4. What else do I need to consider.
Dell :: Optiplex 745c Computer Does Not Have Any Drivers Loaded For Installed NIC Card
Apr 7, 2013My daughter bought a Dell Optiplex 745c from a company who is replacing their cmputers. This particdular computer does not have any drivers loaded for the installed NIC card, so te machine will not talk to the intenet. Are the drivers in the 745 and the 755 the same?
View 1 Replies View RelatedCisco :: Redundant Wlan Controllers (AIR-CT5508-50-K9)
Jun 11, 2012Q: a client has a network with 60 AP's controlled by a AIR-CT5508-50-K9 (+ L-LIC-CT5508-25A) with a redundant power supply. Can he get full redundancy by purchasing a second controller? If he purchases one, can he bring it into the network? What about the extra license for 25 extra AP's installed on the first controller?
View 4 Replies View RelatedCisco :: AIR-CT5508-50-K9 - WIPS Deployment Over WAN / HREAP
Jun 28, 2010I have this Wireless deployment :
Main Site: WLC AIR-CT5508-50-K9
WCS 6.x for 50 APs
(32 ) AP 1140
02 Remote Sites : 03 AP 1140 using H-REAP
Now, my company is considering to implement a wIPS solution, so i planned to install in the Main Site a MSE3300 and (01) AP 3500e as a wIPS AP Monitor in the remote sites,
Need to confirm:
A) Can an AP3500 work with HREAP and as wIPS monitor AP at the same time? or in other words, if it is possible to have an AP wIPS monitor far away from the WLC (over the WAN)?
B) What are the requirements of WAN link if I want to install a Centralized MSE 330 Engine,which perform the wIPS solution in all the network.
Cisco :: AIR-CT5508-K9 - Lightweight AP Loses Connection Every 10 Minutes
Oct 30, 2011Some of my Lightweight Access Points lose connection every 10 minutes now, it worked without problems before.
I'm using an AIR-CT5508-K9 Controller with Version 7.0.116.0 and AP are all AIR-LAP1242AG-E-K9.
In the log I find informations about my node changing his parent and then reseting the radio interface.
I checked my configuration, but perhaps I missed something.
7Mon Oct 31 14:35:11 2011AP's Interface:0(802.11b) Operation State Up: Base Radio MAC:00:3a:99:90:55:c0 Cause=Radio interface reset. Status:NA8Mon Oct 31 14:35:11 2011AP's Interface:0(802.11b) Operation State Down: Base Radio
[Code]......
Cisco Wireless :: License For WCS 7.0 On VMware?
Apr 24, 2012One of our clients is going to install WCS on a Vmware machine and uninstall it from the physical server. He wants to know if he can use the same license or get another one; since he will get a new Mac address with the new VmWare machine.
View 1 Replies View RelatedCisco Wireless :: Adding More License WLC 5508
Mar 12, 2013I have WLC 5508 with 12aps license, i will buy a new license with 50 Aps, my question, its possible add new license with 50 aps, totaling 62 aps licenses?
View 7 Replies View Related