Networking :: To Access AR3140 APC NetShelter SX
May 19, 2011Does access to one of these and could take a few shots of the cable management on the inside ?
View 3 Replies
ADVERTISEMENT
Wireless Networking And Access Point
Jan 17, 2011Wireless networking and access point. I setup a wireless network at a hotel with a net gear router n, three access points, and three repeaters. For some reason; one the access point keep losing the default gateway address. Or it could be all three access point could be losing the default address. I turn off the router and pull the power from all the access point. Then turn the router on and plug the power back into the access point. The default address is back and network working great. I try to find out why the default address keeps missing from the access point. The router is new.
View 1 Replies View RelatedAccess Cd Rom Of Another System In Wireless Networking?
Feb 28, 2012How can i access a cd rom from another machine in a wireless network while both machine using ubuntu linux
View 1 Replies View RelatedNetworking :: D-LINK 524 Cannot Read Access Point
Apr 13, 2011I have a wireless router namely D-LINK 524. i know its a prtty old router..but its never let me down ever before..but thn today i decided to play a couple of games online using the psp/ps3 and well both the devices couldnt read the access point..
Then i go onto my pc and the internet on the pc dont work either :'( so then i reboot the modem nd wifi router..but to no avail.So i unplug da routerand connect da modem directly to the pc and it worked..so i was quite stunned..nd i miss playing online..
So to trim it down the problem basically is my phone/ps3/psp cannot find my access point AND my pc doesnt work when connected through the wireless router.
Cisco Networking :: Access Server With 2509
Jul 13, 2011I was looking for an access server for my Cisco lab, and the 2509-2911 look great. Just a little spendy. I saw that a NM for my current routers would be a bit more.
However, I do have several servers in my rack. Is there a PCI alternative to use a Cisco octal cable to connect? Or would it be cheaper to find a 2509?
Networking :: Multi Tenant VPN Remote Access ASA 5510
Apr 4, 2011I have a situation here where the company is rapidly expanding through acquisition. They are essentially a holding company and own several smaller entities. However most IT is consolidated as new entities are brought in and run out of Headquarters because the Board of Directors/Executive Mgt do not see IT as important and so the budget is extremely limited.
They have approximately 200 remote users at any given time, but they all work for these smaller entities. Currently each location has its own Dedicated Internet Access and VPN appliance (Netgear ProSafe, Cisco ASA 5510, I know of one entity that is just port forwarding to each workstation for RDP ).
They would like to route all traffic back through Corporate so they can consolidate this VPN mess and quit paying for all different kinds of licensing, and also stop paying for dedicated internet access for each location and just use the MPLS and have all traffic inbound/outbound run out of the corporate office.
The only issue is they dont want users to be able to access network resources at other organizations.
Like I said earlier the Board of Directors/Executive Mgt do not see IT as important and so the budget is extremely limited; so if there is an OpenSource option available that would be best. Also the IT dept there is 3 people (IT Manager (IBM AS400 guy), two Helpdesk guys (no certs, HS GED)) So the knowledge resources are limited as well.
Networking :: Access To Modem Configuration Page Through Router WAG54G2
Nov 4, 2011I have the next config: PC -> Asus RT-N16 router (192.168.1.1) -> LinkSys WAG54G2 in bridge mode (192.168.0.1),How can I access to modem's config page from my PC ?
View 2 Replies View RelatedNetworking :: Wireless Networking On MT3707
Oct 23, 2011I recently installed a very basic version of XP on my old laptop (Gateway MT3707).After hours of searching for the correct drivers, I found them, and installed them. After installing the correct drivers for wireless internet I was able to pull up the list and find my network on it.When double clicking on our wireless network it asks for a network key (also called WEP key or WPA key).Now we have a password for our network, but after an exhausting amount of tries that won't work. I not sure if that is what its looking for. In our apartment we run mac OSX, windows vista, etc., but usually the password for the network is satisfactory. I have never ran into this problem.I hate to be a noob, but I don't know where to go from here.
View 6 Replies View RelatedNetworking :: Fixing Networking With DIR-655
Mar 2, 2011Having some serious problems on the networking front here at home. I have 3 PC's and 2 Xbox's that run constantly. Our Internet bandwidth is Insight's 50.0 which is 50Mb download speed 5Mb upload speed. The problem we're having is this. Ever since we upgraded from dual 20Mb lines on a Cisco RV042 to a 50Mb on a DIR-655 we've been having latency issues. I have everything turned off in the router. It's basically there to give out IP numbers and thats it. All security is handled from the PC's themselves. Bandwidth tests are fine, I sustain download speeds above 7MB/s using download managers. But pings are terrible. Xbox live is terrible, PC online gaming is terrible. Pingtest.com is terrible. Only when behind routers. I've tried it behind 3 seperate routers. The DIR-655, the Belkin f5d8236 that insight provided me, and the cisco rv042 originally used for dual wan routing. all of which are met with serious failure.
If I plug directly in to the modem pings are fine. Add a router and pings go to shit.
Way To Set Up Networking
Sep 24, 2012I have 3 LAN connections. I m using 3 modems and 3 switches to connect all the pcs in LAN.but now i want 1 pc as a server which have connected all the 3 lan network with it.so that everyone can share its file to server and even all clients. Should i have to create VPN or homenetwork to connect with server? and i must have to install microsoft windows server in server pc?
View 4 Replies View RelatedNetworking From XP To Windows 7?
May 30, 2012My laptop (Win 7 x64) can currently access all the shares on the XP computers in my home network but,although I can see it, I cannot access the laptop from my main xp computer. I haven't tried to access it from the other xp computers downstairs. I have read the guide on this site as well as 3 or 4 other threads on this subject but am unable to resolve the issue. Completing the network setup so that I can look into my laptop from this main xp computer. My laptop has a wireless internet connection but I also have it plugged into my wired home network for sharing. I will provide other details as needed. I suspect that some essential services for file sharing may not be running on the laptop, but I'm not sure.
View 19 Replies View RelatedUSB Printer Networking?
Jul 16, 2012I have been looking at ways of networking my printer in my office. The problem being that my printer does not have any kind of inbuilt networking capacity.So I thought I could connect it via USB to my router as it has a USB port on it.The router is an Orange Bright Box - In the specs for the router it says that the USB port is for file sharing, mentions nothing of connecting a printer to it
View 2 Replies View RelatedNetworking Between Windows 7 And XP
Sep 11, 2011Trying to network between a Windows 7 computer and a Windows XP computer is possibly the hardest thing I have ever done.I have googled for hours and hours and none of the solutions seem to be working.I will try to explain what I have already done. Although I have done loads and I am sure I am missing some things.I have a Windows 7 laptop and for this exercise I shall call it WIN7. I have a Windows XP computer and for this exercise I shall call it WINXP.Both computers are in the same network which I have called SAMNETWORK. I have enabled permission to Everyone in folder sharing settings on WIN7. I have turned on Sharing and I have made myself discoverable with no password set on Network and Sharing Advanced Settings. Both user accounts on the XP and 7 machines are the same and both passwords are the same. I have turned all firewalls off. The WINXP computer has sharing enabled.
I have done a lot more things including installing LLTP (sp.?) and changing registry entries like Lsa/anonymous something like that (can't remember the actual directory) but I have changed registry entries as I have read elsewhere on the web and I have changed the network from home to work but that did nothing etc. etc. But everything that everyone suggests is just not working and I have been looking for about 4 hours now so you can imagine I have tried everything I have found!Anyway, my 7 laptop can see WINXP but when I click on it, it states that Windows cannot access \WINXP. The WINXP computer can see shared folders from WIN7 but it also states that it is not accessible. However, I did once get the WINXP computer to access the WIN7 shared folders. However, that doesn't even work now. I need the WIN7 to access the WINXP files. [code]
Networking XP Machines - Can't Log In?
Feb 22, 2011Running Windows XP Im a bit Dizzy as i can't seem to workout what's going wrong or what im doing wrong lol!!!8 Pc's on the network, all can view files etc.apart from one Pc Lets just call this "Bob1"It keeps asking for user name and password, now there's no user name or password on the giving pc, file and sharing is open and all the right ports giving. what i can't understand is that the reaming 7 pc's on the network has the same setup and files permissions, on the same subnet and can ping each other to my knowledge.So just to prove myself wrong i made a password for the pc that was asking for one on the network and this still did not work.so to cut the story short 7 pc's can search each other fine but on "Bob1" keeping asking for user name and password.
View 3 Replies View RelatedNetworking Between Laptop And PC
Mar 3, 2011I am having trouble with setting up connection between pc using windows 7 and a laptop using windows xp. Do I have to setup a separate network on my laptop?
View 1 Replies View RelatedHow Far Can Go RG-6 Cable For Networking
Feb 10, 2011I am trying to use the existing rg-6 in a building for internet but am not sure how far a coax can go and still get a good signal strength?
View 1 Replies View RelatedNetworking XP To Windows 7
Dec 25, 2012I am trying to add an XP computer to our (already) Win7 computer.Now...I have connected the xp computer to the external modem that gived the 7 it's signal by way of ethernet cable). I went through changing and matching up the workgroup names, and.....turned on "Network Discovery" on the 7 end....after everything is said and done...I DO get the internet signal to the xp, but knock out the 7, altogether.
View 4 Replies View RelatedNetworking Weird Error
Feb 24, 2011networking error which seems to make no sense to me, i have computer 1 (tower computer) computer 2 (laptop computer 3 (tower computer1 & 2 have networked happily together for 4-5 years, sharing files and printers both ways. 3 was connected and happily joined the network but only with 2. 1 can see files on both 2 & 3, have now disconnected 3, have reset and rebooted router and both computers are up to date with software patches, i can not work out why 2 (or 3 before it was disconnected) can see 1 on the workgroup but can not access 1 in any way. i can, however, copy a shortcut from 1 through metwork places into 2 and access those files from 2. but network wizard or manual setting can not get full sharing.
View 6 Replies View RelatedRemote Corporate Networking Via Vpn
Nov 22, 2012I am the CEO of a small company with 5 divisions, 2 of which are remote. There is also my home office that I wish to be on the company VPN.We can't afford an IT department, so it is up to me to ask for a network diagram (as specific as possible) that lays out all the hardware required.My plan is to eventually have an intranet web server, file server, and database server all for internal use. Our external webserver is hosted by a well-known company. Growth must be considered both in hardware and network.
View 4 Replies View RelatedHow To Setup Networking With 2 NICs
Apr 22, 2012I have two NICs and two seperated network connections on Windows Vista System. I want all visits to websites that are blocked by our Corporation LAN go to the external network, so I can use my personal emails etc.All the other applications still use corporation LAN.
1) Corporation LAN subnet: (Connection 1 - DHCP)
IP: 142.241.X.X
Subnet: 255.255.255.0
Gateway: 142.241.X.X
2) External network LAN subnet: (Connection 2 - DHCP)
IP: 192.168.1.X
Subnet: 255.255.255.0
Gateway: 192.168.1.1
CPU Is Not Detecting Networking Hardware?
Aug 27, 2011When i try to go online it says that i dont have a connection, and that it does not detect any networking hardware. How do i fix this?
View 7 Replies View RelatedNetworking XP With Windows 7 Machine
May 4, 2012I am trying to link a Windows 7 machine with a laptop running Windows XP. The workgroup on both computers is the same. On the Win7 machine, I have a couple of folders set to be shared. The first is the C Drive and the share name is C-drive. The second is Quickbooks that I have named Quickbooks. On the XP machine, I went to map network drive and in the blank typed \Remote1C-drive. It asked for username and password and just like that we were connected. But I can't see all of the files on this drive. I don't even see all of the folders - one of which is Quickbooks. So I tried \Remote1Quickbooks and Windows XP couldn't find that path even though I'm positive that folder is shared on Win7. So no matter what I try, I can't see this folder on the XP machine, I even tried copying this folder to other locations around the computer and setting up shares in hope that something would work, but it never did. So I went back to the C Drive share on the XP machine. I tried to go in reverse, creating a file and putting it on the root of the c drive (I did this on the XP machine, but the file should have actually been located on the Win7 machine. When I check Win7, the file didn't exist. So I tried the other way. I right clicked on the c drive in Win7 and created a new bitmap image file. Back to the XP laptop, that file doesn't show. But if I look at the c-drive on Win7 from the xp machine, I see several other folders and some of them like Program Files contains actual files. But some of them are just empty such as \Remote1C.
View 6 Replies View RelatedNetworking Windows 7 Starter With XP
Jun 19, 2011this is crazy - when i came back from out of town i tried to see if my problem still existed. it did - the win 7 laptop still could not "see" the win xp computers on the home network but all of the xp computers could see the win 7 laptop. just before sending this reply, i tried it "one more time". wa-lah, the laptop can see the other computers. this happened once before, it was seeing them, i had to leave the system and come back the next day - when i came back, the problem had returned. i did notice when i came back from out of town, my power had gone off and came back on- but this was b4 i checked it only to find the problem was still there, as just mentioned, i tried it just b4 writing this reply and the problem was no longer there. i just rebooted the laptop and as we speak, i can see all 3 of the xp computers from the win 7 laptop. i really can't make any sense out of what's going on but am beginning to think its in the modem.
View 5 Replies View RelatedWhat Is Terminal And Workstation In Networking
Feb 11, 2011what is terminal and workstation in networking? I assume they mean client computers.
View 2 Replies View RelatedNetworking Between Laptop And Desktop
Apr 18, 2011I think that's what I want to do. I have an HP desktop with vista and cable high speed modem and a linkys attached to it for wireless. My laptop is a toshiba with wireless running windows 7 and I use it upstairs wireless to connect to the net. There are times I need a file from the desktop and I have to go down and put it on memory stick to copy it over. Is there any way I can access the desktop from the laptop without having to do that? Would need step by step instructions to set it up if it can be done with 2 different operating systems.
View 11 Replies View RelatedNetworking Using Microsoft Virtual PC?
Dec 5, 2011I want to setup a lap environment for my studies using Microsoft Virtual pc. I have installed 3 virtual pc of which 2 are windows server 2008 named srv1 and srv2, the third virtual pc is running windows XP professional services pack 2 with the host operating system being windows 7.I have installed Microsoft loop-back adapter and i am trying to network the 3 virtual pc and the host.
srv1 ip address is 192.168.2.200
srv2 ip address is 192.168.2.201
wk1 ip address is 192.168.2.10
host pc's ip addresss for the loopback adaptor is 192.168.2.5 when i check the workgroup i see only srv1 and srv2 i am only able to ping srv1 and svr2, the rest are unreachable.
Sharing :: Networking Only Working One Way
Jul 1, 2011i have previously never had a problem setting up a network at home enabling sharing of files and printers with up to 4 computers with them all using all the resources/printers of each computer.i have now just 2 computers my main computer can use resources of my other computer, but this is not reciprocated.pc 1 can access pc 2 with no issue pc2 can not access pc1 unless i drop a shortcut onto the shared docs of pc2.
things i have tried:
- turning off firewalls
- running ms networking tool
- maually setting up a network
- connecting pc2 to pc3 with no issue with recripocal sharing of files/printers etc
- switching off file sharing and back on
- numerous pc restarts
- ensuring pc names/workgroups etc are correct
i am at a loss as to how i can get pc2 to start using the printer on pc1; i have just swapped pc2 for a different machine and the ame problem exists so the problem, as far as i can tell, must be with a problem on pc1 not allowing access; when you try and click on pc1 as a workgroup pc it denies access.
How To Add Mac With Wireless Home Networking
Apr 3, 2011I have a home networking linksys wireless router and want to add my iBook laptop to this network thru the macs airport . I pcs are xp and vista. iBook is mac os
View 1 Replies View RelatedNetworking Paths Are Not Found
Jun 20, 2011networking path are not found what can i do
View 3 Replies View RelatedBest Way To Learn About Networking / Servers
Aug 17, 2012I'm someone who has a long background of computers but it's generally just giving general advice, building them, overclocking them and troubleshooting standard 'Home PC' type issues mostly with hardware but some software as well. I really want to start to expand my knowledge somewhere else within computer hardware and software to improve my job prospects in this area. I'm trying to move towards more of a Network/Server admin/support type career and I'm just wondering where the best place to start learning about something like this might be? I don't even know where to begin.
View 2 Replies View RelatedLaptop Has Very Slow Networking?
Aug 28, 2011I have a tata photon+ which the provider said that the speed is up to 3.1mbps but i m gettingonly the speed of 128kbps not more then that so any1
View 5 Replies View RelatedTG782T - Networking Windows 7 To XP Sp3?
Sep 13, 2012So I have a desktop connected to a Thomson TG782T via the ethernet cable, (this desktop is running Windows7). I also have a laptop which allows me to use the wireless modem for the internet, (Windows XP sp3) but what I cannot seem to do is set up a network between the 2 pc's to share files, printer, and also game together.
View 1 Replies View RelatedDiagrams Of Faceplate In Networking
Jan 25, 2011What is the color code for connecting rg45, a patch panel and a faceplate
View 2 Replies View Related