Router's LAN Is Not Blinking
Sep 4, 2011My router's LAN is not blinking and also my internet is not working!!
View 1 Replies
ADVERTISEMENT
Router :: Dlink Dir-628 Logo Is Blinking?
Dec 29, 2011i have a dlink dir-628 and it not working problem. the power light, local network led and even the dlink logo is blinking. it was working fine yesterday but it just stopped working randomly, i tried to reset but that doesnt even work,
View 6 Replies View RelatedLinksys WRT54G2 V1 Router Blinking But Not Connecting?
Oct 7, 2011I have a Linksys WRT54G2 V1 router that doesn't work. The lights all blink properly, but the internet connection part doesn't seem to be working. When connecting internet line directly to the computer, my internet works, but when connecting it to the router to the computer, it doesn't. I've tried resetting, unplugging for 30 minutes, etc. Putting in 192.168.1.1 brings up nothing on my web browser. Pinging it says connection timed out. My ipad is able to pick up the router signal as it shows the wifi bars on top, but when trying to use the internet, it says that it's not connected to the web.
View 2 Replies View RelatedD-Link DIR-601 :: Cannot Log In To Router - Wireless Icon Blinking
Feb 1, 2012I've had a DIR-601 for about a year now. Since I've got it I get errors telling me the DNS server is unavailable randomly, so I reset my modem and router, do the ipconfig windows commands, but this time it seems as if the wireless isn't working. This computer is connected to the router via wire and can connect to the internet just fine, but any wireless devices cannot. On the front of the router the wireless icon is just blinking. Also, I am not able to connect to the router login page through it's IP address, it just times out.
View 1 Replies View RelatedE4200 - LED Lights On Router Keep Blinking Orange?
May 1, 2013I have a Cisco E4200 router connected behind my Comcast cable modem.
The small LED lights located at each network cable plug-in on my router are continually blinking orange all at the same time over and over.
I also notice on all my computers that are wired to this router the small LED lights near the network card plug-in are also blinking orange.
what these orange lights mean and if I have a problem?
My internet service seems to work OK but I'm not sure what is causing all these orange LED's to blink and is there something wrong that imay be slowing my system down.
I have upgraded my Cisco router to the latest firmware and also power reset my cable modem and router several times with no change in the problem.
Linksys Wireless Router :: WRT54G2 - No LAN And Simultaneous Blinking
Dec 7, 2012I have Linksys WRT54G2 V1 it suddenly died yesterday. I does not broadcast any wifi, I tried connecting via cable but there is no LAN, "Network Cable Unplugged". I also tried to do 30 sec reset even the 30/30/30 reset but no success. The front lights and power supply are blinking exept the Wifi and Power indicators.
View 1 Replies View RelatedLinksys Wired Router :: Power LED Blinking BEFSR41 4.2?
Jan 3, 2013 i tried to upgrade my BEFSR41 model 4.2 to a newer firmware (FW_BEFSR41v4.3_2.00.4.5_20080603_code.bin) and got a blinking power led. I've tried to power cycle (several times), reset (several times, 30/60 secs), unbrick (several times) and still have flashing power led. My connection to the router looks like:
Request timed out.Request timed out.Request timed out.Reply from 192.168.1.1: bytes=32 time<1ms TTL=64Reply from 192.168.1.1: bytes=32 time<1ms TTL=64Reply from 192.168.1.1: bytes=32 time<1ms TTL=64Reply from 192.168.1.1: bytes=32 time<1ms TTL=64Reply from 192.168.1.1: bytes=32 time<1ms TTL=64Reply from 192.168.1.1: bytes=32 time<1ms TTL=64Reply from 192.168.1.1: bytes=32 time<1ms TTL=64Reply from 192.168.1.1: bytes=32 time<1ms TTL=64Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Reply from 192.168.1.2: Destination host unreachable.Request timed out.(and offline until the next reset)
Linksys Wireless Router :: E2500 Power LED Blinking
Dec 7, 2012I'm using an E2500 and the Power LED started blinking this week.From the manual, this means “Flashes slowly during bootup, during firmware upgrades, and druing a Wi-Fi-Protected Setup Connection.” We have a wireless printer (wireless disabled), and a Kindle that does use wireless. All other computers are hard wired. I have not started a Wi-Fi protected setup. The router has been in use since the third week in October, and is more or less OK even though the Power LED is flashing. How do I get the Power LED to stop flashing?
View 3 Replies View RelatedLinksys Wireless Router :: Wrt120n Lights Always Blinking
Nov 10, 2011Are the lights supposed to always blink in random order..the power light is solid but other 2 beside it and the 1 where the desktop is plugged in are blinking like crazy.
View 5 Replies View RelatedLinksys Wireless Router :: EA4500 Blinking Every Five Minutes
May 2, 2013I just bought an EA4500 and I set it up and about every 5 minutes it starts blinking slowly and dropping connection.
View 4 Replies View RelatedLinksys Wireless Router :: WRT54G Power Led Is Blinking?
Jan 26, 2012I'm having a problem with my WRT54G wireless broadband router. The power light is blinking and I can no longer access the internet. What should I do. I can't seem to understand the self-help on your site.
View 2 Replies View RelatedLinksys Wireless Router :: E4200v1 Blinking Cisco LED?
Apr 21, 2012I got this replacement router and it is not even a week old and it is doing same thing the previous one was.
View 1 Replies View RelatedBelkin Routers :: N150 Router V1 Is Blinking Orange?
Oct 22, 2012My N150 router V1 is blinking orange, reset tried many times but nothing works, its less than a year old but i dont have the receipt any more.
View 1 Replies View RelatedCisco Switches :: DI-655 Router - No Blinking Activity Lights
May 24, 2012My previous setup was a ProSafe GS108 switch, 10/100 Dlink router/switch used only as a switch, and a DI-655 router/switch. With this setup, activity when I wasn't using any of my computers was zero. There would be no blinking activity lights.
I dumped the ProSafe and 10/100 switch, and use the DI-655 only for my internet uplink and wireless, and now have everything else plugged into a Cisco GS200 switch. There is activity now every two seconds. I presume this prevents the Green energy saving features from kicking in as the ports are in use.
What's the difference that's leading to all this activity that presumably wasn't there before?
Linksys Wireless Router :: WRT610N - Power Led Blinking?
Apr 13, 2013I have a problem with a LinkSys WRT610N router (v1).
I have just bought it used. The problems: I see the power led blinking all the time. I can't connect to 192.168.1.1. I do not notice any effect on the leds when pressing the reset button (I feel a soft click when I do that, but none of the leds seem to realize). The manual states that the led should stop blinking after the "self-diagnostics" ends.
My configuration is DSL connection (by AT&T, phone cable), a Siemens 4100 modem, an ethernet cable into the LinkSys router, then an ethernet cable into a Linux PC. Everything is wired. I see the green light of the LAN connection to my PC, the world blue icon and the USB icon stable on, a shy orange led on in the middle (wireless?) and the power blue led blinking. The PC is configured with DHCP, and I can access both the modem (192.168.0.1) and the internet. The gateway address is the one of the modem (again 192.168.0.1). In summary, the ethernet of the router seems to work, but the router is completely transparent, inaccessible, unconfigurable, apparently unresponsive. Trying to connect to 192.168.1.1 (the supposed default address of the web interface of the router, which is different from the 192.168.0.1 of the modem) I get a timeout error, and I can't ping that address. The modem is configured to handle the PPPoE connection, which I am not sure what it means but the text description suggests in this mode I should be able to access the router, provided that its address is not conflicting with the modem's. If I disconnect the modem from the router, DHCP does not get any address. If I force one, 192.168.1.1 still does not respond to pings.
So Is it normal not to notice any reaction when hitting the reset button? is the object just broken, except that the ethernet subsystem still works?
Belkin Router F5D82354 - Modem And Internet Blinking Amber
Nov 2, 2011A couple nights ago, in the middle of my surfing the net, i was cut off and 'checked the modem (working good) and the router, displaying blinking amber lights --modem and internet. I had to restart my router, usually, it would work after that and i could surf again. This time, when it started back up, the router light turned blue and then the modem and internet light started blinking amber. I haven't done anything except chat over the net when it happened. All other lights are blue. I have cycled the modem power, the router power, and restarted the computer and have the same results. I already followed the troubleshooting from Belkin support 192.168... completely restore it to it's factory settings and yet, i still end up not being able to connect in the internet and with that blinking amber lights. I already tried connecting directly from my modem to my win 7 laptop --no problem at all. I could surf and chat. but when i tried connecting it again from modem to router so i can do wireless.
View 4 Replies View RelatedProtocols / Routing :: TPLink TP-8840 Router Led Blinking And No Internet
Jan 13, 2013I had this problem for 3 months now, at random times I get no connection and the LAN led 1 in my router (which I am connected to) just keep blinking very fast, ADSL and ACT leds are just on. I tried to troubleshoot the problem and it detected 2 problems: "default gateway is not available" and "local area connection doesn't have a valid IP". even when it says that it is fixed, seconds later the problem is still there (sometimes it gives me one problem only). I tried many solution on the forum including reseting the router, disabling the laptop's wireless modem (I'm on a laptop) and even trying ipconfig/release - ipconfig/renew. everything is up to date and I update my antivirus (and it has auto update enabled). here are my specs:
Broadband connection: DSL
Router Make/Model: TP-LINK TP-8840
Anti-virus: Avira free anti-virus
ipconfig data:
[Code].....
Thomson TG784 Router - Power And Ethernet Light Is Blinking
Aug 21, 2012I have a Thomson TG784 router and i have a problem with it. once i turn on my rouet, and no cables are plugged in, except the power one, the two lights start blinking. The Power and the Ethernet ligh blinking. Once i connect my Ethernet cable and my DSL cable, the light are still blinking with no changes... What should i do?
View 1 Replies View RelatedLinksys Wireless Router :: Power Light On Wrt54g V2.2 Keeps Blinking
Oct 29, 2011the power light on my wrt54g v2.2 router keeps blinking and it wont connect to the internet when connected
View 3 Replies View RelatedLinksys Wireless Router :: WRT54G Blinking Power Light
Jul 4, 2006My Wireless-G WRT54G router has a blinking power light and the startup software says "Unable to connect to the Router! Check that the Router has been connected to the computer, and that your Ethernet adapter is working." I tried uploading the firmware but I can't get to the router page to update. Is there a known problem or solution here or am I just going to have to find the router page?
View 9 Replies View RelatedLinksys Wireless Router :: E1000 Lights Won't Stop Blinking?
Mar 31, 2011I have an E1000 wireless router and after rebooting it from the web admin page it won't stop blinking. I tried following the reset instructions on this page but it is still blinking.
[URL]
I can't access 192.168.1.1 via my browser either. Is there anything else that I can try before considering it defective?
Linksys Wireless Router :: WRT54G Not Working - Lights Blinking
Jul 17, 2011I went online with a tech real quick before I found I beyond complimentary tech support. They say my router is working like a switch. I cannot get any wireless access and to the three direct connections to the router only one is working. The lights are constantly blinking, with the power light blinking every so often
View 1 Replies View RelatedLinksys Wireless Router :: WRT160N Power Light Blinking?
May 11, 2009So I recently upgraded from a WRT54GS to a WRT160N v2, all was well and good for about 3 days. Then I would lose my internet connection every 5 minutes or so, it would fix itself by the time I could open up command prompt and start pinging to pin point the problem. I decided I would update the firmware to see if that would fix the issue. Since doing that the power light has been blinking non stop. I've tried restoring it to factory defaults by holding the reset button for 30seconds, turning it off for 2 minutes and back on. That little blue light just keeps flashing. I can't even access the router setting page using 192.168.1.1. My OS is Windows xp x64 sp2, and I have DSL.
View 9 Replies View RelatedLinksys Wireless Router :: E1000 Blinking All Lights Steadily
Sep 11, 2011Somehow in the process of researcing how to add my new laptop to the router, the router quit working and is now just blinking the blue panel lights.I was attempting to download Cisco Connect to my flash drive and instead it began to execute and I aborted that in about 10 seconds.
View 1 Replies View RelatedLinksys Wireless Router :: WRT150N All Lights On Front Are Blinking
Feb 9, 2008I had successfully set up my new WRT150N router and it was working. But then it just stopped after about 12 hours. All the lights on the front of the router are blinking. When I directly connect to the router, my computer can't detect it. I've browsed through these forums a bit and tried a few things - the reset button (60 seconds), unplugging the router, downloading the EasyLink Connect tool, but I'm still stuck.
View 5 Replies View RelatedLinksys Wireless Router :: E1000 Lights Blinking Erratically
May 7, 2011When I came home tonight, the lights on my E1000 hardware version 1 (that I have had for only 9 months) were, as best as I can describe, blinking like a digital clock blinks 12:00 over and over. All of the blue LEDs would light up at once, and go off, repeatedly and rapidly. This is the second time this has happened - the first time (about two weeks ago) I called a techie friend and he had me hard reset the router (30 on 30 off 30 on) and it worked, I just had to set up my wireless network again. This time, I just unplugged the cable from the back of the router, waited about 15 seconds and plugged it back in, and it went back to normal.
In case someone may be wondering, unplugging the from the surge protector did NOT work; when I first noticed the lights blinking, I unplugged it from the surge protector, waited about 10 seconds, and plugged it back in; the lights continued their rapid erratic blinking. I then did what I described above - I plugged it back into the surge protector, and then unplugged it from the back of the router, waited, and plugged it back in and it was back to normal.
I thought perhaps it needed a firmware upgrade, but checking the website, while I was able to locate the site to upgrade the firmware for E1000, I could only see an upgrade for hardware Version 2, and my router is Version 1 - which, from what I understand, is NOT what I want, as that firmware is for a different hardware version and may cause problems on my Version 1 router.
While my router seems to be fine now. Is my router starting to kick the bucket already? I haven't had it that long - bought it last September. Do I need to upgrade any software or firmware for it? If so, where do I get the correct upgrade for my hardware version?
Linksys Wireless Router :: WRT54G V5 Blinking Power Light
Oct 29, 2011I need fixing my router. I updated the firmware and it said the upload has failed ever since then:
-the router doesn't work
-blinking power light
-DMZ light doesn't turn on
-can't access 192.168.1.1
My router is a WRT54G v5
Linksys Wireless Router :: WRT54G - Power Light Keeps Blinking
Feb 3, 2012the power light on my wrt54g v2.2 router keeps blinking and it wont connect to the internet when connected, what should i do?
View 1 Replies View RelatedLinksys Wireless Router :: Power Outage - E1000 Lights Blinking
Apr 28, 2011I am on a surge protector and we lost power last night. This morning we were stilling experiencing a brown out but now the power is back 100%. I've walked through the E1000 router reset and not matter what I do, all the lights except the power light blink rapidly and dimly. Could the router be fried even though it's on a surge protector???? It's less than 6 months old so hopefully still covered by warranty.
View 9 Replies View RelatedLinksys Wireless Router :: Status Light On EA6500 Won't Stop Blinking
May 9, 2013I cannot get access into my router because it doesn't seem to have a gateway IP address, although it is assigning my computer an IP address.
View 1 Replies View RelatedLinksys Wireless Router :: WRT54GS V1.0 Firmware - Blinking Power Light
Feb 20, 2012No download available and none available via Linksys Live Chat or FTP and having spent the best part of the week trying to find relevant firmware on other forums I decided to come here to get answers to the following questions, hopefully from version 1.0 experienced owners or not.
#1. Can the firmware of version 2.0 and 3.0 be reduced to flash version 1.0?
#2. When diagnosing the blinking power light issue by connecting directly to the router and the network card using "ping -t 192.168.1.xxx" which network address do I use, 192.168.1.1 or 192.168.1.2 to 2xx?
I get a reply using 192.168.1.1 but I'm not sure that works when using the TFTP Utility if it's the wrong address on my Laptop to ping?
Linksys Wireless Router :: WRT54GS / Power Light Blinking - Internet Is Down
Feb 21, 2012I have a Linksys WRT54GS vers 7.2 Router on an iMac OS X Leopard. The other day I was in the middle of downloading an upgrade for the router when Firefox gave me this message: "Firefox can't find the server". I was no longer able to access the internet, and the router's green power light was left flashing. It flashed for over 24 hours. I tried unplugging the router and shutting down the computer, then plugging in the router and turning on the computer. (I don't have a modem.) The light was still flashing. I tried pressing the logo button for 5 seconds. Still flashing. Tried pressing the reset button in the back. Still flashing. 'I can't get on the internet or into the router. Linksys live chat gave me a link to "Upgrading the router’s firmware using the TFTP utility", which involves a download, but I can't download anything because I can't access the internet.
View 8 Replies View RelatedLinksys Wireless Router :: WRT54G V5 With Blinking Power Light Connected
Mar 24, 2011I've seen related to flashing power lights on the router involve fixes via firmware upgrades off a PC.I'm on an iMac os 10.6.7. The WRT54 used to work as a wireless modem a couple of years ago. Tonight, it doesn't. power light blinks. Can't access any webpage interface for the thing. Reset, power down, computer restart, cable modem turn off don't change anything. Is there anything that can be done other than tossing the linksys? If that is the only option, are there wireless routers more suitable for a Mac?
View 4 Replies View Related
