E4200 - LED Lights On Router Keep Blinking Orange?
May 1, 2013
I have a Cisco E4200 router connected behind my Comcast cable modem.
The small LED lights located at each network cable plug-in on my router are continually blinking orange all at the same time over and over.
I also notice on all my computers that are wired to this router the small LED lights near the network card plug-in are also blinking orange.
what these orange lights mean and if I have a problem?
My internet service seems to work OK but I'm not sure what is causing all these orange LED's to blink and is there something wrong that imay be slowing my system down.
I have upgraded my Cisco router to the latest firmware and also power reset my cable modem and router several times with no change in the problem.
View 4 Replies
ADVERTISEMENT
Oct 22, 2012
My N150 router V1 is blinking orange, reset tried many times but nothing works, its less than a year old but i dont have the receipt any more.
View 1 Replies
View Related
Feb 26, 2013
I have a N450DB wireless N Router model number F9K1105 and I'm connected to the internet with an occasional interuption. The light on the front of the router is blinking orange and I have reset it and powered it down several times with no luck. According to my settings I have the newest firmware and all updates have been performed.
View 3 Replies
View Related
Mar 29, 2012
I m getting red & orange lights on lan socket
View 1 Replies
View Related
Nov 10, 2011
Are the lights supposed to always blink in random order..the power light is solid but other 2 beside it and the 1 where the desktop is plugged in are blinking like crazy.
View 5 Replies
View Related
May 24, 2012
My previous setup was a ProSafe GS108 switch, 10/100 Dlink router/switch used only as a switch, and a DI-655 router/switch. With this setup, activity when I wasn't using any of my computers was zero. There would be no blinking activity lights.
I dumped the ProSafe and 10/100 switch, and use the DI-655 only for my internet uplink and wireless, and now have everything else plugged into a Cisco GS200 switch. There is activity now every two seconds. I presume this prevents the Green energy saving features from kicking in as the ports are in use.
What's the difference that's leading to all this activity that presumably wasn't there before?
View 2 Replies
View Related
Mar 31, 2011
I have an E1000 wireless router and after rebooting it from the web admin page it won't stop blinking. I tried following the reset instructions on this page but it is still blinking.
[URL]
I can't access 192.168.1.1 via my browser either. Is there anything else that I can try before considering it defective?
View 3 Replies
View Related
Jul 17, 2011
I went online with a tech real quick before I found I beyond complimentary tech support. They say my router is working like a switch. I cannot get any wireless access and to the three direct connections to the router only one is working. The lights are constantly blinking, with the power light blinking every so often
View 1 Replies
View Related
Sep 11, 2011
Somehow in the process of researcing how to add my new laptop to the router, the router quit working and is now just blinking the blue panel lights.I was attempting to download Cisco Connect to my flash drive and instead it began to execute and I aborted that in about 10 seconds.
View 1 Replies
View Related
Feb 9, 2008
I had successfully set up my new WRT150N router and it was working. But then it just stopped after about 12 hours. All the lights on the front of the router are blinking. When I directly connect to the router, my computer can't detect it. I've browsed through these forums a bit and tried a few things - the reset button (60 seconds), unplugging the router, downloading the EasyLink Connect tool, but I'm still stuck.
View 5 Replies
View Related
May 7, 2011
When I came home tonight, the lights on my E1000 hardware version 1 (that I have had for only 9 months) were, as best as I can describe, blinking like a digital clock blinks 12:00 over and over. All of the blue LEDs would light up at once, and go off, repeatedly and rapidly. This is the second time this has happened - the first time (about two weeks ago) I called a techie friend and he had me hard reset the router (30 on 30 off 30 on) and it worked, I just had to set up my wireless network again. This time, I just unplugged the cable from the back of the router, waited about 15 seconds and plugged it back in, and it went back to normal.
In case someone may be wondering, unplugging the from the surge protector did NOT work; when I first noticed the lights blinking, I unplugged it from the surge protector, waited about 10 seconds, and plugged it back in; the lights continued their rapid erratic blinking. I then did what I described above - I plugged it back into the surge protector, and then unplugged it from the back of the router, waited, and plugged it back in and it was back to normal.
I thought perhaps it needed a firmware upgrade, but checking the website, while I was able to locate the site to upgrade the firmware for E1000, I could only see an upgrade for hardware Version 2, and my router is Version 1 - which, from what I understand, is NOT what I want, as that firmware is for a different hardware version and may cause problems on my Version 1 router.
While my router seems to be fine now. Is my router starting to kick the bucket already? I haven't had it that long - bought it last September. Do I need to upgrade any software or firmware for it? If so, where do I get the correct upgrade for my hardware version?
View 2 Replies
View Related
Apr 28, 2011
I am on a surge protector and we lost power last night. This morning we were stilling experiencing a brown out but now the power is back 100%. I've walked through the E1000 router reset and not matter what I do, all the lights except the power light blink rapidly and dimly. Could the router be fried even though it's on a surge protector???? It's less than 6 months old so hopefully still covered by warranty.
View 9 Replies
View Related
Nov 3, 2012
I noticed on my new cisco 2960s switches, that all the lights went orange for about 10 seconds then went off again, this was during normal operation, all ports were shutdown at the time apart from a few,the ones that were enabled, the led's went off.
View 3 Replies
View Related
Sep 2, 2012
I was called into a company today to look at their Cisco 7604 router as it had stopped working. The supervisor has all it LED in orange state, there was no blinking of the lights at power on they went straight to orange. Tried removing all cards, having only supervisor card in, etc but always the orange lights.
View 2 Replies
View Related
Oct 31, 2011
We recently had a big storm and lost internet connection to our house. Whilst internet connection has since been restored I've noticed that there are now orange lights above the port where the ethernet cable connected to on our notebook. I also cannot get internet connection using the ethernet cable. Does this mean my internal modem has blown? I can use the wireless modem with no problems.
If the modem has blown, how much are they usually to replace and is it relatively easy? I have a Inspiron 1525 Notebook.
View 1 Replies
View Related
Feb 9, 2011
I have a question concerning the Internet LED Status Indicator. The manual states "A solid light indicates connection on the Internet port. This LED blinks on data transmission".My router seems to be working fine but the Internet LED on my 615 is blinking orange.Reason??
View 3 Replies
View Related
Feb 21, 2012
Network port: Yellow light blinking and orange light not showing
View 1 Replies
View Related
Nov 5, 2011
i have a PPPOE type of connection for my modem and just now my router is blinking both lights Orange and blue at the same time....but the internet is still connected..
View 14 Replies
View Related
Jul 11, 2012
I came home after a few days vacation to find all the lights blinking on my router. I have tried unplugging and rebooting. Same result. I then bypassed the router and have internet on my main computer so I know it is a router issue. I use the router for my laptop and cell phone. Do I need to figure out how to do a master reset or is the router toast?
View 1 Replies
View Related
Feb 4, 2012
I have been given the task of unbricking a WRVS4400N V2 router. It just sits there with the Power and Diag lights blinking and does nothing else.I'm thinking I'm going to have to try to find some way to flash the firmware, because I'm seeing that this is a common problem with this router.I already tried support "chat" online, but after about 20-30 minutes waiting for someone to actually come into the chat room, I gave up.I did note that this model is not being sold anymore and won't be supported before very long, so this may be a gigantic waste of time, but I thought I would give it a shot.
View 2 Replies
View Related
Jul 11, 2011
I am replacing an old Catalyst 3550 (that has 2 Gig ports) with a 3750 (that has 4)- I used the exact same configuration in the new switch. When I plugged in the new 3750, the trunk ports started blinking from green to amber. I dont know why this is occuring- it SEEMS to be fine, but we havent thrown a whole bunch of traffic over it.
View 4 Replies
View Related
Jan 21, 2013
We recently installed 15 of these switches, and we're having a few odd, random network issues. But before I enumerate those issues, I have a simple question: are the connection lights on these switches *supposed* to blink rapidly? Or are they supposed to blink *normally*?On all other switches I've ever seen / worked on / worked around, when a cable is plugged into a port, the connection lights blink upon network activity. sometimes they blink a little faster when there's lots of activity, but mostly it's an almost lazy, random kind of blinking. When you look at a switch and every light on every port that's connected is blinking very rapidly, your first instinct is "No *wonder* nothing works around here!" and you find the port that's chattering and unplug it...all the blinkies go back to normal.Well, on the 15 switches we've installed, every light that's on blinks rapidly, as if there's an uncontrolled storm going on. Is that the "new norm"? Did I miss the memo, and there is nothing to be worried about here? Or are the rapidly blinking lights telling me there is, indeed, a problem?
View 4 Replies
View Related
Jul 1, 2011
I was quite excited about E4200 I got yesterday. Everything works perfect except front LED light start blinking a few hours later. Don't know why it happens in a sudden and non-stop. After several tries, I found that disabling SSID broadcast for both 2.4 and 5GHz stops the blinking.Of course, before doing that, I upgraded firmware to 1.0.02, reset to factory defaults and finally set up E4200 manually rather than using Cisco Connect. Now the LED light is continuously lit.
View 4 Replies
View Related
Oct 29, 2012
F7D1301 v1 is my router model. i installed it this morning; all was working fine; then i changed password; still working fine; then i attempted to change pw a second time; router turned to solid orange and no matter what i try, i can't get it working again. i reset it, unplugged it, etc.
View 5 Replies
View Related
Jun 3, 2012
So I have been having internet problems lately and first thought it was my modem. Figured out it wasn't the modem but the isp.After I woke up the next morning I found the wireless not to we working again but the hard connection to be just fine. I have tried resetting the router but I'm not entirely sure I went through. The orange light no longer comes on. Wired connection also doesn't work while connected to the router. I have tried 192.168.1.1 and nothing loads. The router and modem are about 5 or 6 years old. A windows xp desktop, windows 7 and vista laptops are on the network with a blue ray player.the router is a wrt54gs2 v7
I think i have to reconfigure the router but I'm not sure. If that's the case why am i having trouble with 192.168.1.1?
View 3 Replies
View Related
Nov 7, 2012
Today I woke up and wanted to connect to the internet via my laptop. The current network I have is the DSL modem connected to a WR841ND TP-LINK router, and then connected via LAN port to my desktop PC, and via Wi-Fi to a Laptop.However, my connection was unsuccesful. I power cycled both the modem and the router, awaited for a stable connection, and tried again with no result.That's when I noticed the lights on my router seemed strange. While the router's LAN port 1 to the computer was connected and lit, the LAN port 4 was also lit, but it wasn't connected to anything. Then I noticed my wan port showed the same behaviour, since it was already unplugged, but its light was still on.
That's when I decided to do a factory defaults reset, a hard reset, and reuploaded the firmware to the router. No change at all.I decided to connect my DSL modem to the computer directly, and internet works like a charm, so everything points to the router as the source of the problem.Now, I wanted to know. What would be the procedures I should follow to test or repair the router before declaring it "deceased"? Could this be more of a firmware problem? A hardware one?
View 1 Replies
View Related
Jan 15, 2012
like today randomly my internet went down. And then everything changed back to its original like my SSID from Netcom it changed back to wireless and everything was default and also the PPP was off so i wasn't able to connect to the internet. So i went to my router setup page on the internet or whatever and turned it back on. So now like the internet on my computer which has a cable to the router works but the wireless internet doesn't work for my laptop nor ipod. I can see the connection on the laptop and ipod but when i try to connect it keeps saying that it is unable to connect.
View 7 Replies
View Related
Apr 9, 2012
All the light indicator of the router are working as they should,however there will be no internet connection.This happens about once a day(rest of the day the internet works fine),I then have to switch off the router,wait for a good amount of time and then switch it back on and then internet will work fine.I use the router for many devices like my windows 7 laptop,an ipad,iphones.
View 1 Replies
View Related
Sep 4, 2011
My router's LAN is not blinking and also my internet is not working!!
View 1 Replies
View Related
May 23, 2012
Today a bought a brand new Netgear WNR2000 router.Upon setup the wifi was working correctly. All of the lights where active and it seemed everything was in order.Because the power cord was in the way I moved it and plugged it into a different powerpoint. From then onwards my router has not been working. Only three of seven lights are active (green).
I have tried unplugging and replugging all network cords. I have also turned it on and back off, reset the router and run the initial installation program thrice.What should I do now? Nothing so far has effected it. The computer I am installing it on is running Windows XP and the laptop I intend to use the wifi on is Windows 7.
View 1 Replies
View Related
Jul 11, 2011
So the power light on my WRT54GS router is off but my LAN lights 1-4 and the WLAN light stay on when power is attached but no cables are in the ports.
View 4 Replies
View Related
May 14, 2012
I have a LinkSys WRT 160 N wireless router, the router just stopped starting abruptly, when i power cycle the router, all the 4 ethernet light come on, and that is where it gets stuck. I've tried using the reset button but there is no effect after i depress the button.
View 1 Replies
View Related
Aug 21, 2011
My e1000 router (v 2.1) has reset itself and after that all lights except the wireless adapter has gone solid blue, I have no ethernet conectivity and hard reset the router did not work.
View 9 Replies
View Related