I have a Buffalo NAS with IP address 192.168.1.30 linked to my router, which has IP address 192.168.2.1. Both have the same subnet mask: 255.255.255.0.DHCP on the router assigns IP's to my computers on the network (192.168.1.xxx). How do I access my NAS?
View 3 Replies
I have a supplier which i need to connect a site to site ipsec vpn connection to (from a draytek router). I have already done this on our main site with no problems using the local ip details of 192.168.1.0 and subnet 255.255.255.0 however i need to do the same on our DR site which uses the ip details of 10.1.0.0 and subnet of 255.255.0.0. Our supplier told me the 255.255.0.0 is already used at there end by a different customer so we are unable to connect the vpn and communicate (in theroy we can connect but our supplier cannot reply). We can setup a connection to another spare server on a different address using a different subnet but effectivly this would mean that communication would stop at that server and communcation to the overall network or specific server the supplier needs access to (on the 10.1.0.0 255.255.0.0 network) is not possible. I was thinking maybe an internal vpn server to server connection through win server may do it, 2 nic cards or routes in the server routing table but this all seems a bit messy. Our network consits of win 2003 and 2008 R2 servers and is basic network with modem-vpnfirewall-switch and devices on the internal network connecting to the switch.
View 5 Replies View RelatedAny solution for NAT only for a specific ip address or a range of ip addresses from the same subnet?
I've read that the router in gateway mode automatically makes the translation and in router mode does not. Starting from this, is there any way to nat from firewall access rules only.
I am trying to Port Forward HTTP: 80, but my Router wont let me and it keep giving me this error message Status: Port Range Overlap with Remote Management.I have a NETGEAR CG814GCMR Router, I need to add that port for setting up a Game private server online, but my router wont let me, how to fix it?
View 12 Replies View RelatedI am trying to set up a WAP4410n Wireless access point and add to my home network. One problem I can't seem to get around. The IP adress range setup does not accept 1 (example 192.168.1.245) as a range setup for IP address. How do i get in communication with the unit when I can't view the setup due to the factory default set as 192.168.1.245? If it were 192.168.0.245 I could easily change my routers IP range to include it.
View 0 Replies View RelatedI have a WN3000RP WiFi Range Extender but I cannot seem to find out how to connect to it on my Windows 7 Desktop computer to configure it. My Router is a Netgear Wireless G RouterWGR614 v9
View 7 Replies View RelatedIs it possible to enable an absolute value rate limit using QOS on a HP ProCurve 5406 switch for a particular IP range on a specific port? Is there a way to configure our HP 5406 with an absolute rate limit on "WAN" port for that server's IP range? I would like to limit it to only being capable of sending 1Mbps worth of traffic over the head end at once.Everything in the documentation points towards priority queues, which as far as I can tell, isn't really what I want.Baring accomplishing this goal using rate limiting is there a better way to prevent our services from accidentally saturating this connection?i thimkong about somthing like that:
class ipv4 rate-limit-port-A1
match ip 10.136.0.0/16 any
exit
policy qos port-a1-ratelimit
class servers-to-be-slowed action rate-limit kbps 1000
exit
interface A1 service-policy port-a1-ratelimit inI'm not sure about this.
my working area lan is control by admin.they always change the ip number because sometime my server line drop because some computer is effected by networking virus .The problem is how can i trace ip number.
View 2 Replies View Relatedhow to subnet a class B IP address?I have a homework, I don't know how to subnet a class B.
View 2 Replies View Relatedhow do i find my routers ip?
View 2 Replies View Relatedi want to connect dvr to the internet i need the step to take and process of creating a public LAN Address
View 1 Replies View RelatedI have wrongly entered a ip address while port forwarding... and my router seems to not be responding.Meaning whenever I put the Default gateway numbers ,my router does not open.
View 1 Replies View RelatedDoes the ASA treat an object-group with a network-object containing a range of IP addresses as a netmask? For example, I can apply this configuration without the ASA throwing any errors though the configuration calls for a 'net mask':
object-group network test
network-object 192.168.0.0 192.168.63.255
?
network-object-group mode commands/options:
A.B.C.D Enter an IPv4 network mask
sh run ob id test
object-group network test
network-object 192.168.0.0 192.168.63.255
I found that in the documentation it requires a netmask as oppose to a range. Is this a bug in the code? I am running code version 8.0(5)23 on a 5520. If this is not a bug how does the ASA treat this type of configuration when applied to an access list? When I ran a quick packet trace and denied access from that range it looks like the ASA doesn't read that configuration properly.
When I do a nslookup on my computer IP address I find that it is chained to 2 Net names
View 3 Replies View RelatedHow do I get rid of a 169 ip address on my printer and synch up with router.My HP All In One Serieds 4500 printer has an ip address of 169.254.0 and my router is 192.168.1.0. They need to match in order for me to print wirelessly from my laptop
View 6 Replies View RelatedI remember long ago I was upto some trial and error with my router and I ended up in changing some ip that I didn't know about that time, now when I was trying to forward some of the ports. I addressed the computer to 192.168.1.1 (as this was my ip that time I remember and on the box its written too) but it didn't respond, then I remember that I have changed this ip to something else and now I can't remember this.
View 7 Replies View Relatedwhen i try and repair it it comes bk saying cannot repair ip address coz cant clear arp cache
View 1 Replies View Relatedwindows seven changes my ip address after sitting idol for awhile. I have to reboot and reset my modum the computer is brand new
View 1 Replies View RelatedI have a linksys router model#wrt54gt v1 and I can not pull up the router's ip address to change the security settings. I have checked and I have the correct IP address of 192.168.1.1. I can ping the router and everything hooked up to the router is now working correctly. I was having problem with the router losing the internet ip address and having to turn everything off and then back on to connect to the internet. I reset the router and it seems to have corrected that problem but I now can not pull up the router's ip address. I have tried in Internet Explorer and Firefox. I have tried typing thebefore the ip address but it will not pull up. I have read countless posts trying to trouble shoot and figure out what's wrong with it and nothing will work.
View 5 Replies View RelatedI've set up a DHCP reservation on a Netgear wpn824v3 router, using its "Attached Devices" list to specify the MAC address of a computer on the network to use IP 192.168.5.200. After using "ipconfig /release" then "ipconfig /renew" on the client PC, though, the client PC keeps going back to the address it got automatically, i.e., 192.168.5.3.How can I force the client to use 192.168.5.200?
View 1 Replies View RelatedI try to access my router web page with a correct address (192.168.1.1) but on my computer i have this message {Network Error (tcp_error)} but i can access this page from another computer through the network (WHY)
View 1 Replies View RelatedI want to setup a static ip address for a h.264 network dvr ,however my desktop computer is out of order, that is connected direct to router,is it possible to use my wireless laptop to setup the router,or will I have to connect the eithernet cable to the laptop.
View 4 Replies View Relatedrecently, i have connected the internet to my PC with cable. Here the problem is , the packets are not receiving in the status bar of internet connection. I have checked in command prompt, the ip address is connecting properly but the default gateway ip address is showing "Request Timed Out" message.
View 1 Replies View RelatedI want to setup an home network with a wireless router and use multiple switches for wired connections through out my home. I currently have an Airport extreme hooked up to a cable modem and a leviton gateway hooked up to the Airport. The 2 computers connected to the Leviton are on a windows 7 homegroup and share fine, but won't share or discover any wireless device connected to Airport. My main goal is to have a wireless/wired network with all computers sharing information with each other. I want 2-3 wired switches/gateways with a min of 2 devices connected to each, connected to my wireless router whiich is connected to cable modem.
View 3 Replies View RelatedCan I put more than one N300 Dual-Band Wi-Fi Range Extender on my home network?
View 4 Replies View Relatedwe had servers with 10. addresses and they now give out 192. addys when pinged. The addresses haven't been changed manually but what might cause this?
View 1 Replies View RelatedSo i set up my trendnet ip camera. It stopped working so i called their tech support and they gave me another ip number. My question is what is the range of ip addresses.? ,my address is 192.1.1..xxX do they just pick a random number??
View 1 Replies View RelatedI have one cisco 2851 router and one watchguare firewal currently being used as the main router. I want to connect the cisco as a secondary router on the same network.
View 10 Replies View Relatedhow to connect 2 routers on different lan
View 3 Replies View RelatedI have an IPAD, pc , laptop, mobile and my daughter comes over with her ipod and mobile.As I understand things my IP address range is not big enough and as a result my IPAD keeps dropping and saying not connected
View 14 Replies View RelatedI have a device(internet radio) that seems to require an address format of 192.168.xxx.xxx. The router does not do this range and I cannot set it to that range ( the first three xxx). If I try the router defaults back to 192.168.x.xxx. Any way to over come this so I can connect the radio (which works fine wired as the ISP can supply a 192.168.xxx.xxx IP address).
View 6 Replies View RelatedI'm trying to perform ping to another network segment using nat to those devices but the ipaddress i assigned are the same as the segment i am trying to monitor is there anyway to overcome this?
View 4 Replies View Relatedhow do i change existing server ip address to a different range,,what changes do i have to make?
View 3 Replies View Related
