Routers / Switches :: Creating A VPN Connection?
Mar 11, 2012What is the best way to set up a VPN connection?
View 2 Replies
ADVERTISEMENT
Cisco Switches :: ESW 520 - Creating A VLAN
Dec 8, 2010we have two Catalyst Express 500 switches and a ESW 520 just purchased. the VLAN on the other two is 2. how do I change the Default to be 2 instead of 100 in the ESW Switch.
View 3 Replies View RelatedRouters / Switches :: D-Link And Linksys Routers Plus Modem Connection
May 26, 2011everything was all good, my brother went crazy and unplugged everything.it effects our house phone too, that could be the problem.i just dont know what wires went where. all the wires are the same color.but i know which is which. just again, dont know where.i would like to get it done before he gets home later on.
View 1 Replies View RelatedCisco Switches :: Linksys SPS224 / Creating VLAN Through SNMP
May 30, 2011I have Linksys SPS224Trying to create VLAN through SNMP. Issueing the string to create VLAN ID=100 with name "VLAN100"
snmpset -c private -v2c 10.254.2.144 .1.3.6.1.2.1.17.7.1.4.3.1.1.100 s VLAN100 .1.3.6.1.2.1.17.7.1.4.3.1.5.100 i 4
It reports
Error in packet.
Reason: (genError) A general failure occured
Failed object: iso.3.6.1.2.1.17.7.1.4.3.1.1.100
In same time changing the name of existing vlan snmpset -c private -v2c 10.254.2.144 .1.3.6.1.2.1.17.7.1.4.3.1.1.23 s VLAN23 and even deleting the existing vlan snmpset -c private -v2c 10.254.2.144 .1.3.6.1.2.1.17.7.1.4.3.1.1.510 i 6 are successful.
How can I create new vlan through SNMP?
Cisco Switches :: SG200-18 - Losing Access On Random Ports When Creating LAG
Aug 3, 2011I just bought a SG200-18 in order to use LAG between a backup server and multiple computers and servers. Servers are supposed to all use 2 links and computers only 1.
As soon as I activate LAG on port 2 and 3, no matter what is connected on the switch I lose access to the switch interface (luckuly, it's still working on port 17 for a strange reason) and all computers / servers connected are randomly losing the network access. Everyrhing start to be slow but most servers and computers don't lose access to the internet. Browsing a web site will suddenly take ages but... it will work eventualy.
I already used LAG on other switch without a single issue.. The only uplink I have is to the router and I know that I don't have any issue with network cables....
So what am I doing wrong ??? I didn't even try to configure the TEAMING on the servers, just creating LAG on the switch will kill everything Oo.. I'm starting to think that my SG200 is dead out of the box.
Cisco VPN :: 1841 - Creating Connection Using SDM
Feb 12, 2011i am trying to make site to site VPN on cisco 1841 router using SDM , but I faced a strange problem . I successfully install sdm , internet browser , disabled block pop up , and java . i successfully can run SDM and configure the router using it .
BUT\ when I select VPN>>Site to site VPN >>Create Site to Site VPN tap >> and Press on Lanuch the selected task to start the creation process using the wizard Unfortunately it is not working ,, I don't know why ?
I tried with another PC , another SDM version , another browser .
Routers / Switches :: How To Set Up Wireless Connection
Apr 15, 2013I am trying to connect my PC wireless.. But I am unable to do so. I am getting the error "Configuration failed".
View 4 Replies View RelatedCreating Network Bridge Between PC And Blu-ray Player Via LAN Connection?
Mar 10, 2011I am having trouble creating a network bridge between my PC and Blu Ray player via LAN connection. I have done it before, but always run in to problems. I took my computer on vacation and messed up the existing connection and settings. Last time I successfully created the connection, I stumbled upon the answer, but can't remember how I fixed it. I should say that I can create the bridge, but once I do, the wireless internet connection no longer works, and my blu ray player can't connect to the internet either. I have forced compatibility mode on the wireless network via DOS, but no luck. I did the same on the LAN connection just for the heck of it. Still no luck.
View 10 Replies View RelatedCreating A Network Off A Hotel Wired Connection?
Jul 24, 2012I'm currently staying at a marriott in NYC and at night after work the wireless access becomes awful. As a work around I've plugged the ethernet into my apple airport express and launched my wireless network as usual.Things are all fine and dandy for the first hour or so of browsing or watching netflix. But then it seems to lock up and I lose connection. I haven't seen any caps on data transfer that would explain it but is there something else I should be looking at? The fact that it works (albeit for a limited time), is a good sign I think. I'm mostly using it for my ipad to watch netflix etc.
View 2 Replies View RelatedRouters / Switches :: Failing Internet Connection / DNS?
Jul 24, 2011The connection of the computer before is activating.. after how many days of using,it losses the internet connection.. what is the possible reason for this?
View 1 Replies View RelatedRouters / Switches :: Use Ip Webcam In Wireless Connection?
Aug 31, 2011I am using the android phone with software IP WEBCAM and it works fine to view video withiin the same wireless network for android phones and computers.I have to just type[URL] I want to use it to in my home ( Wireless Connection 1 )on my laptop to see the video of my office( Wireless Connection 2 ) using android phone, but the problem here is it says port forwarding should be enabled to wireless d-link 600 router and then the http:<ip address>:<port> should be accessed?
View 1 Replies View RelatedRouters / Switches :: How To Share A Internet Connection With Sky
Mar 4, 2011I have a USB modem connection, and i want to share the connection with two computers and three wireless devices through a sky router. The system OS is Windows 7
View 4 Replies View RelatedRouters / Switches :: How To Setup A LAN Connection Properly
Jul 1, 2011I Have a Computer Ready for setup as a Server in the LAN Connection:
Windows 7 Professional.
Another 2 Computers for LAN Connection:
1st Computer is a Windows 7 Professional (Connect as LAN)
2nd Computer is also Windows 7 Professional (Must connect using a Wifi D-Link)
Another 2 Computer for LAN Connection:
Windows XP: Must Connect Using LAN port.
1 Computer:
Windows 7 Home Edition: Must Connect Using LAN port
2 Laptops:
1st Laptop is using Windows 7 Ultimate.
2nd Laptop is a Vista.
How to Connect these Computers to the above mentioned computer ready for setup as as Server?
Routers / Switches :: Wireless And Wired Connection For The Same Set Of PCs?
Feb 1, 2012I have 3 PCs (win7-64) connected to a wired gigabit network to achieve fast transfer of large files. Separately, at a distance, I have a modem-router to access the Internet. Internet access for the 3 PCs is achieved with each PC connected wireless to the latter modem router. The 2 networks are running OK and PCs can connect each other on both networks. Question: How can I know and achieve that the gigabit network is used for file transfers and not the slower wireless network? How should configure both routers and PCs to achieve this? I don't need the wireless setup to be a network, just to provide wireless access for each PC and that's it. I used to have the gigabit LAN configured with a Dlink DAP1522 bridge that created a single wireless connection between this wired LAn and the modem-router but it stopped working and I'm pretty done with it.
View 10 Replies View RelatedRouters / Switches :: Lan Not Showing In Network Connection
Feb 4, 2011i formatted my pc but after that lan is not showing in network connections
View 1 Replies View RelatedRouters / Switches :: Only Can Get Local Connection On Router
Jul 27, 2011When I try to set up my Belkin mondem router I can only get local connection only as soon as i remove the wired setup cable. The routor itself is connect to the internet and other laptops can connect when given the password. I tried to set it up on a different laptop and got the same result. I have reset the factory setting and tried again with the same result I connect to the routor but not the internet. If I reconnect my talktlalk routor there is no problem.
View 5 Replies View RelatedRouters / Switches :: Keep Loosing Connection With WLL Internet
Jul 27, 2011I have recently changed my router from Netgear to TalkTalk because of an intermittent signal, no problem with my desktop ethernet or laptop wireless or tablet but I keep loosing connection with my WII internet connection for Netflix.
View 10 Replies View RelatedCisco Routers :: WRVS4400N Creating IP Based ACL For Vlans That Are Not Default
Aug 18, 2011After a long effort I managed to get my WRVS4400N to work and provide a stable WLAN/LAN and to define all network devices in my home office. It is running the latest firmware (2.0.1).
I created a seperate SSID and a vlan for it (vlan ID is 3 and IP is 192.168.1.xxx while the default vlan IP is 192.168.0.xxx).
My plan is to use that SSID/vlan for the kids and block some bad content for them via the router there.
I want to make a ACL for that vlan but in the computer list option I can only specify ranges in the default VLAN segment (192.168.0.xxx) while in practice I need the 192.168.1.xxx segment.
I can't switch to .0.xxx as some devices are hard wired to be .1.xxx on my network.
Routers / Switches :: Siemens Se568 No Wifi Connection?
Aug 13, 2011siemens se568 router installed. Net is fine in PC.but not getting the wifi connection in i fone,despite wifi icon
View 2 Replies View RelatedRouters / Switches :: Losing Internet Connection And Stuff?
Sep 26, 2011It is set to dummy mode so it should just pass through to the WRTG54S router which handles the DHCP.2) I have 6 computers sucking the internet off of the router. One is wireless.3) I have been set up for about 6 months this way. 4) I use to drop the DSL connection about twice a day. I would unplug the WRTG54S and plug it back in and everything would reset and work. Then, recently it has gone to about 15 times a dayThen, we have to make a major electrical change in the building, which required us to go to generator power only for 5 days. For 5 days, we never dropped the DSL connection a single time. Power was restored. Generator sent back home. Problem is back. Dropping DSL connection again.5) Hooked up APC battery backup power smoothing device to 3 cpus, WRTG54S, and DSL modem.
View 5 Replies View RelatedRouters / Switches :: No Local Area Connection To Internet?
Dec 21, 2012I am now using my dell optiplex 755, with windows xp sp3. The first set up was with wireless ,which works fine, but now I am trying to use the ethernet to netgear switch, to comcast modem, from dell desktop, I get error that says,TCP/IP is not enabled for thisconnection.Can not proceed. I have also tried to repair local connection with the Icon at the bottom, it has error that says ,local area connection.This connection has limited or no connectivity.do I need a new IP address for the this connection? I have tried to run ethernet from modem to computer ( to by pass the switch
View 5 Replies View RelatedRouters / Switches :: Loosing Connection From A DHCP Router?
Jan 16, 2012We are in a hotel that allows us to use their router with a Hawking 300N expander. We seem to lose connection each time their router gets a new IP address. The router seems to lose connection frequently. Is there a setting in the expander that will allow the expander to "follow" the DHCP address of the router without having to take it down and go thru the setup each time.
View 2 Replies View RelatedRouters / Switches :: Internet Connection Has Become Weak And Slow?
Nov 17, 2012My ISP tested my connection and told me my signal is very weak. I can no longer play games online because I lag tremendously. I can't steam videos while someone else is using the internet either. Also I can't access it on wireless devices unless I am in view of the router. I'm not sure what caused my connection to suck butI have the essential plan from cox.com. When I test my connection on speedtest.com I average 75ms/ping, 3.25mbps/dwnld spd, and
View 2 Replies View RelatedRouters / Switches :: No Internet Connection From Repeater Hub Which Worked Before?
May 9, 2012I have a 2nd pc that i want to add to my basic home network. I have installed a fresh copy of Windows 7 Ultimate 64bit yet still have issues connecting to my router. There is basic activity but nothing on the internet I have tried to use command line netsh to force DHCP on it says it is but I am getting a subnet mask of 255.255.0.0 when everything else is 255.255.255.0 not sure if this matters as there are only 4 devices on the network.
View 2 Replies View RelatedRouters / Switches :: Connection Dropping When Others Connect (Sometimes Randomly)
May 7, 2012For the past few months my internet connection will randomly drop for about 5-10 seconds when someone else connects to the network. I am using a wired Ethernet connection and as said when someone connects either via WiFi or also through a wired connection, the internet for me will drop as soon as the device is connected, and then randomly every 20 minutes or so thereafter. I should also mention that rarely the connection will just drop for again, 5-10 seconds even when nobody else is connected.I tried my computer at someone else's house using their router and it worked fine, no disconnects at all.
View 1 Replies View RelatedRouters / Switches :: Can't Get Router Usb Port To Keep Reliable Connection
Apr 15, 2012how do I get my hard drive to work thru my belkin router usb port?
View 1 Replies View RelatedRouters / Switches :: Configure 2 Static IPs Over Single Connection?
Jan 28, 2011This is the situation in our Lab.We have one telephone line with broadband connection and a system which is connected to a modem to use this broadband facility. Recently we have taken two static IPs over this connection for a project work.Now what I want to know is, how to configure these static IPs, so that I can connect two systems (each one to one static IP) to use these static IPs and continue to access the internet in the 3rd (already present) system.
View 7 Replies View RelatedRouters / Switches :: Setting Up Internet Connection Using 3G Usb Modem?
Jun 8, 2011I have a big 2 floor house .I would like to use 3G connection using USB type of modems,like vodaphone or MTS. which router to be used so that I can get good connectivity on both floors. NOTE- I do not want to use cabled internet coonections.
View 2 Replies View RelatedRouters / Switches :: Cannot Connect To Any Ftp Server From Internet Connection
Sep 17, 2012My problem is I can not connect to any ftp server or any database server using my home internet connection. But i can connect to the same servers using my work internet or even using my 3G mobile connection.I tried to contact with my service providers with no luck.I am using a Zyxel wireless router. Is there any settings in my router which stops me to connect those servers.
View 4 Replies View RelatedCreating Broadcast Network (Ethernet) / Connect Router To Another Via A PPP Connection?
Mar 12, 2012So you've got broadcast networks - Ethernet, PPP networks such as serial & T1/E1 and then youve got Non-broadcast multi-access links such as Frame relay and ATM. I understand the concepts of each. That's not the problem.My question is, is it possible create a broadcast network (Ethernet) but also connect a router to another router via a PPP connection? Say to a specific branch for example. Just curious if you can use multipule link types.
View 4 Replies View RelatedRouters / Switches :: Lost Wireless Connection - Unable To Connect
Jun 9, 2011I have a wireless router that was named and all the wireless equipment (laptop, ipod, phones) was connecting easily with no problems. Everything is saying "unable to connect". I have no clue what she did but she said her laptop asked her for the 8 number code from the router and she entered it.
View 1 Replies View RelatedRouters / Switches :: Randomly Dropping Wan Connection On Wifi Router
Mar 23, 2012* ADSL modem connected to internet
* WiFi router (Netgear WPN824v2) connected to ADSL modem
* CPU, iPhone and iPad connected to router, CPU wired connection.Everything has worked like a charm up until a couple of days ago. Now the link between the router WAN port and the modem randomly drops. Stays dropped for 1-3 secs and then connect again. When its really bad this happens with 5-10 secs intervall. This made it impossible to use the network from any of the devices.If I disconnect the CPU from the router and connect it direcly to the modem and change the IP settings to match the modem network the CPU connects without errors to the internet, iPad and iPhone connected to the router keeps having problems.Restarting the router does not change anything and it seems to be more frequent errors during heavy load hours, in the morning I have almost no problems at all, in the evenings I cant almost use the wireless devices (CPU works fine as its now connected directly to the modem not through the router).I havent changed a setting in the last year, it just came right out of the blue.I have hard reset both the modem and the router and reconfigured them (that I dont want to do again as I have some virtual servers, port forwards, port triggers and so on :P).As it came right out of the blue without me changing anything on any device and as it seems to be more frequent during heavy load hours I'm suspecting that the ISP is involved, but how can they be (it works fine with devices connected straight to the modem)?
Routers / Switches :: Lost Connection To Netgear Router WNR2000v1
Mar 3, 2011i tried to change my nat type to open, on my Netgear WNR2000v1.i connected throught typing my routers ip. (192.168.1.1)i watched a utube video, where someone told me that i had to changed something in the basic section to 2, instead of auto.now i cant connect to my router. ive tried with multiple pc's.
View 5 Replies View Related