Routers / Switches :: Only Can Get Local Connection On Router
Jul 27, 2011
When I try to set up my Belkin mondem router I can only get local connection only as soon as i remove the wired setup cable. The routor itself is connect to the internet and other laptops can connect when given the password. I tried to set it up on a different laptop and got the same result. I have reset the factory setting and tried again with the same result I connect to the routor but not the internet. If I reconnect my talktlalk routor there is no problem.
View 5 Replies
ADVERTISEMENT
Dec 21, 2012
I am now using my dell optiplex 755, with windows xp sp3. The first set up was with wireless ,which works fine, but now I am trying to use the ethernet to netgear switch, to comcast modem, from dell desktop, I get error that says,TCP/IP is not enabled for thisconnection.Can not proceed. I have also tried to repair local connection with the Icon at the bottom, it has error that says ,local area connection.This connection has limited or no connectivity.do I need a new IP address for the this connection? I have tried to run ethernet from modem to computer ( to by pass the switch
View 5 Replies
View Related
Dec 11, 2011
roku player will not connect through verizon router, message
View 1 Replies
View Related
Mar 22, 2013
4 pcs are connected to a adsl bb router having 4 lan ports. i have removed the adsl cable going to the bb router cos bb giving problems. i m then connecting to internet on any one pc using a tata photon usb device. i want to share this internet on other 3 pcs. those 3 pcs are getting their ips from the bb router in 192.168.1.x series. all pcs are pinging to gateway ie 192.168.1.1 but not pinging each other. why?
View 3 Replies
View Related
Jan 16, 2012
We are in a hotel that allows us to use their router with a Hawking 300N expander. We seem to lose connection each time their router gets a new IP address. The router seems to lose connection frequently. Is there a setting in the expander that will allow the expander to "follow" the DHCP address of the router without having to take it down and go thru the setup each time.
View 2 Replies
View Related
Apr 15, 2012
how do I get my hard drive to work thru my belkin router usb port?
View 1 Replies
View Related
Mar 23, 2012
* ADSL modem connected to internet
* WiFi router (Netgear WPN824v2) connected to ADSL modem
* CPU, iPhone and iPad connected to router, CPU wired connection.Everything has worked like a charm up until a couple of days ago. Now the link between the router WAN port and the modem randomly drops. Stays dropped for 1-3 secs and then connect again. When its really bad this happens with 5-10 secs intervall. This made it impossible to use the network from any of the devices.If I disconnect the CPU from the router and connect it direcly to the modem and change the IP settings to match the modem network the CPU connects without errors to the internet, iPad and iPhone connected to the router keeps having problems.Restarting the router does not change anything and it seems to be more frequent errors during heavy load hours, in the morning I have almost no problems at all, in the evenings I cant almost use the wireless devices (CPU works fine as its now connected directly to the modem not through the router).I havent changed a setting in the last year, it just came right out of the blue.I have hard reset both the modem and the router and reconfigured them (that I dont want to do again as I have some virtual servers, port forwards, port triggers and so on :P).As it came right out of the blue without me changing anything on any device and as it seems to be more frequent during heavy load hours I'm suspecting that the ISP is involved, but how can they be (it works fine with devices connected straight to the modem)?
View 15 Replies
View Related
Mar 3, 2011
i tried to change my nat type to open, on my Netgear WNR2000v1.i connected throught typing my routers ip. (192.168.1.1)i watched a utube video, where someone told me that i had to changed something in the basic section to 2, instead of auto.now i cant connect to my router. ive tried with multiple pc's.
View 5 Replies
View Related
May 26, 2011
everything was all good, my brother went crazy and unplugged everything.it effects our house phone too, that could be the problem.i just dont know what wires went where. all the wires are the same color.but i know which is which. just again, dont know where.i would like to get it done before he gets home later on.
View 1 Replies
View Related
Apr 15, 2013
I am trying to connect my PC wireless.. But I am unable to do so. I am getting the error "Configuration failed".
View 4 Replies
View Related
Mar 11, 2012
What is the best way to set up a VPN connection?
View 2 Replies
View Related
Jul 24, 2011
The connection of the computer before is activating.. after how many days of using,it losses the internet connection.. what is the possible reason for this?
View 1 Replies
View Related
Aug 31, 2011
I am using the android phone with software IP WEBCAM and it works fine to view video withiin the same wireless network for android phones and computers.I have to just type[URL] I want to use it to in my home ( Wireless Connection 1 )on my laptop to see the video of my office( Wireless Connection 2 ) using android phone, but the problem here is it says port forwarding should be enabled to wireless d-link 600 router and then the http:<ip address>:<port> should be accessed?
View 1 Replies
View Related
Mar 4, 2011
I have a USB modem connection, and i want to share the connection with two computers and three wireless devices through a sky router. The system OS is Windows 7
View 4 Replies
View Related
Jul 1, 2011
I Have a Computer Ready for setup as a Server in the LAN Connection:
Windows 7 Professional.
Another 2 Computers for LAN Connection:
1st Computer is a Windows 7 Professional (Connect as LAN)
2nd Computer is also Windows 7 Professional (Must connect using a Wifi D-Link)
Another 2 Computer for LAN Connection:
Windows XP: Must Connect Using LAN port.
1 Computer:
Windows 7 Home Edition: Must Connect Using LAN port
2 Laptops:
1st Laptop is using Windows 7 Ultimate.
2nd Laptop is a Vista.
How to Connect these Computers to the above mentioned computer ready for setup as as Server?
View 1 Replies
View Related
Feb 1, 2012
I have 3 PCs (win7-64) connected to a wired gigabit network to achieve fast transfer of large files. Separately, at a distance, I have a modem-router to access the Internet. Internet access for the 3 PCs is achieved with each PC connected wireless to the latter modem router. The 2 networks are running OK and PCs can connect each other on both networks. Question: How can I know and achieve that the gigabit network is used for file transfers and not the slower wireless network? How should configure both routers and PCs to achieve this? I don't need the wireless setup to be a network, just to provide wireless access for each PC and that's it. I used to have the gigabit LAN configured with a Dlink DAP1522 bridge that created a single wireless connection between this wired LAn and the modem-router but it stopped working and I'm pretty done with it.
View 10 Replies
View Related
Feb 4, 2011
i formatted my pc but after that lan is not showing in network connections
View 1 Replies
View Related
Jul 27, 2011
I have recently changed my router from Netgear to TalkTalk because of an intermittent signal, no problem with my desktop ethernet or laptop wireless or tablet but I keep loosing connection with my WII internet connection for Netflix.
View 10 Replies
View Related
Jan 29, 2011
I want to setup an home network with a wireless router and use multiple switches for wired connections through out my home. I currently have an Airport extreme hooked up to a cable modem and a leviton gateway hooked up to the Airport. The 2 computers connected to the Leviton are on a windows 7 homegroup and share fine, but won't share or discover any wireless device connected to Airport. My main goal is to have a wireless/wired network with all computers sharing information with each other. I want 2-3 wired switches/gateways with a min of 2 devices connected to each, connected to my wireless router whiich is connected to cable modem.
View 3 Replies
View Related
Apr 23, 2011
how to connect two subnets with two switches and one router using router sim software?
View 1 Replies
View Related
Aug 13, 2011
siemens se568 router installed. Net is fine in PC.but not getting the wifi connection in i fone,despite wifi icon
View 2 Replies
View Related
Sep 26, 2011
It is set to dummy mode so it should just pass through to the WRTG54S router which handles the DHCP.2) I have 6 computers sucking the internet off of the router. One is wireless.3) I have been set up for about 6 months this way. 4) I use to drop the DSL connection about twice a day. I would unplug the WRTG54S and plug it back in and everything would reset and work. Then, recently it has gone to about 15 times a dayThen, we have to make a major electrical change in the building, which required us to go to generator power only for 5 days. For 5 days, we never dropped the DSL connection a single time. Power was restored. Generator sent back home. Problem is back. Dropping DSL connection again.5) Hooked up APC battery backup power smoothing device to 3 cpus, WRTG54S, and DSL modem.
View 5 Replies
View Related
Nov 17, 2012
My ISP tested my connection and told me my signal is very weak. I can no longer play games online because I lag tremendously. I can't steam videos while someone else is using the internet either. Also I can't access it on wireless devices unless I am in view of the router. I'm not sure what caused my connection to suck butI have the essential plan from cox.com. When I test my connection on speedtest.com I average 75ms/ping, 3.25mbps/dwnld spd, and
View 2 Replies
View Related
May 9, 2012
I have a 2nd pc that i want to add to my basic home network. I have installed a fresh copy of Windows 7 Ultimate 64bit yet still have issues connecting to my router. There is basic activity but nothing on the internet I have tried to use command line netsh to force DHCP on it says it is but I am getting a subnet mask of 255.255.0.0 when everything else is 255.255.255.0 not sure if this matters as there are only 4 devices on the network.
View 2 Replies
View Related
May 7, 2012
For the past few months my internet connection will randomly drop for about 5-10 seconds when someone else connects to the network. I am using a wired Ethernet connection and as said when someone connects either via WiFi or also through a wired connection, the internet for me will drop as soon as the device is connected, and then randomly every 20 minutes or so thereafter. I should also mention that rarely the connection will just drop for again, 5-10 seconds even when nobody else is connected.I tried my computer at someone else's house using their router and it worked fine, no disconnects at all.
View 1 Replies
View Related
Jan 28, 2011
This is the situation in our Lab.We have one telephone line with broadband connection and a system which is connected to a modem to use this broadband facility. Recently we have taken two static IPs over this connection for a project work.Now what I want to know is, how to configure these static IPs, so that I can connect two systems (each one to one static IP) to use these static IPs and continue to access the internet in the 3rd (already present) system.
View 7 Replies
View Related
Jun 8, 2011
I have a big 2 floor house .I would like to use 3G connection using USB type of modems,like vodaphone or MTS. which router to be used so that I can get good connectivity on both floors. NOTE- I do not want to use cabled internet coonections.
View 2 Replies
View Related
Sep 17, 2012
My problem is I can not connect to any ftp server or any database server using my home internet connection. But i can connect to the same servers using my work internet or even using my 3G mobile connection.I tried to contact with my service providers with no luck.I am using a Zyxel wireless router. Is there any settings in my router which stops me to connect those servers.
View 4 Replies
View Related
Sep 22, 2011
After a brand new Router/Modem combo., there is NO local/wired connection with XP, although other PCs has a good connection with strong signal.
Is it because a spectific folder needed for wired/local connection got lost, .... or Networking card inside got defective?
View 3 Replies
View Related
Sep 22, 2012
How I can stop a local internet connection from using my computer, or the router? I am using high speed through frontier. I have deleted this local internet connection once before. When they or it connects to my stuff, I cannot get online. It says, Unnamed Network - Unsecured Network.Radio type 802.11g with excellent strength.
View 1 Replies
View Related
Jun 9, 2011
I have a wireless router that was named and all the wireless equipment (laptop, ipod, phones) was connecting easily with no problems. Everything is saying "unable to connect". I have no clue what she did but she said her laptop asked her for the 8 number code from the router and she entered it.
View 1 Replies
View Related
Aug 9, 2012
At the moment I am trying to connect to a DHCP ISP, but the connection only last for 10-15mins and then it will automatically disconnected. Every time I reset the WAN port , service back to normal for another 10-15 mins >< The are no log or any error message when connection timeout. the status of the WAN port is normal "Up Up"I have tried this config on another ISP and everything work just fine!!!
Fiber connector -------> Cisco 1812 (FastEthernet1) --------->LAN
Router#sh run
Building configuration...Current configuration : 3205 bytes
!
version 12.4
service tcp-keepalives-in
service tcp-keepalives-out
[code]....
View 1 Replies
View Related
Aug 9, 2012
the Xbox part was a windows thing. The router, modem, computer, and monitor, are all on one powerbar. I have used the used-to-be-wired computer (I needed the ethernet cord for something else, haven't gotten around to plugging it back in.) and the wireless laptop loses connection periodically. ALWAYS lose connection on bootup. and also when doing power consuming things. SO, I believe it is a lack of power being sent to the router. wired connections would use less, thats why they are still active, but I assume the wireless transmitter needs more energy in order to function properly. I haven't used the old computer in a awhile now, but I assume if I plug the router into another outlet/curcuit I the problem wouldnt occur. Might need someone wiht more knowledge to confirm this, but I'm fairly certain this was the cause.
View 3 Replies
View Related
