Routers / Switches :: Wait For Wireless Subsystem To Authenticate?
Nov 22, 2011wait wireless subsystem authenticate 802.1x
View 1 Replies
ADVERTISEMENT
Cisco AAA/Identity/Nac :: ISE 1.1.3 Authenticate Wireless Users / Admin Access To WLC / Switches
Mar 13, 2013Deployed two Cisco ISE 1.1.3. ISE will be used to authenticate wireless users, admin access to WLC and switches. Backend database is Microsoft AD running on Windows Server 2012. Existing Cisco ACS 4.2 still running and authenticating users. There are two Cisco WLCs version 7.2.111.3.Wireless users authenticates to AD through ACS 4.2 works. Admin access to WLC and switches to AD through ISE works. Wireless authentication using PEAP-MSCHAPv2 and admin access wtih PAP/ASCII.
Wireless users cannot authenticate to AD through ISE. The below is the error message "11051 RADIUS packet contains invalid state attribute" & "24444 Active Directory operation has failed because of an unspecified error in the ISE".Conducted a detailed test of AD from ISE. The test was successful and the output seems all right except for the below: [code]
Update:
1) Built another Cisco ISE 1.1.3 sever in another datacentre that uses the same domain but different domain controller. Thais domain controller is running Windows Server 2008. This works and authentication successful.
2) My colleague tested out in a lab environment of Cisco ISE 1.1.2 with Windows Server 2012. He got the same problem as described.
Laptop Without Video Subsystem - How To Get Files From HD
Nov 30, 2012I have a friends laptop running Windows, either Vista or 7 where the video subsystem isn't working. But it is running and I plugged it into my network/router. I would like to get to the hard drive to get files off. I have both Linux Mint and Windows 7 on my computer.
View 5 Replies View RelatedCisco Switches :: Cannot Authenticate SG-300-10 With RADIUS
Jan 30, 2013I have been trying to set this up for like 4 hours. What a waste of time. This should be as easy as punching in the IP and password for the radius server. It isn't.I have a brand new SG-300-10. LATEST firmwawre, I just updated it about 5 minutes ago. 1.2.7.6 I think.This is what I have done so far in the GUI: (I have CLI access too if necessary)
Security > RADIUS and entered my radius IP/secret there.
Security > Access Management Profiles > Create new template called ALL that permits access to all applications. Set it as active also.
Security > Management Access Authentication > For HTTP and SSH
I put RADIUS first then Local second.My radius server works. As I type this message I am logging in via radius with OpenBSD/Centos even Fedora. (If OpenBSD can do it, these switches can do it.)But whenever I try to login with RADIUS credentials to my switch, I get no logs or any connectivity reports on my radius server? Is the switch even attempting to contact the server? The logs dont show anything regarding RADIUS. I am trying a reboot now, but I don't think that should be necessary.Is there a step I missed? When first looking at this I expected it to be done in 5 minutes. I have been on this for lik 4 hours. Isimply want to login to the administration console (web gui) using RADIUS credentials.
Cisco :: How Long Tcp Should Wait For Close Connection
Dec 24, 2012i want to know that how long a tcp should wait for close the connection.
View 3 Replies View RelatedCisco Firewall :: ASA 5520 Shows To Wait And Then Nothing Happens
Aug 7, 2011I have new ASA5520. After configured and upgrade with ASA 8.0(3) image its works for few times (few times means after restarted several times). But now the error comes as "Booting system, Please wait..."
View 9 Replies View RelatedCisco Routers :: RV042G Set Up A VPN That Will Authenticate User Through AD
Apr 17, 2013We looking into options for using VPN to allow users to work from home at our company. We already run Windows Active Directory and have a Cisco RV042G router. We would like to set up a VPN that will authenicate user through AD. Is this possible with the RV042G?
View 2 Replies View RelatedRouters / Switches :: Setup An Home Network With A Wireless Router And Use Multiple Switches?
Jan 29, 2011I want to setup an home network with a wireless router and use multiple switches for wired connections through out my home. I currently have an Airport extreme hooked up to a cable modem and a leviton gateway hooked up to the Airport. The 2 computers connected to the Leviton are on a windows 7 homegroup and share fine, but won't share or discover any wireless device connected to Airport. My main goal is to have a wireless/wired network with all computers sharing information with each other. I want 2-3 wired switches/gateways with a min of 2 devices connected to each, connected to my wireless router whiich is connected to cable modem.
View 3 Replies View RelatedRouters / Switches :: Smurf Attacks On Belkin Wireless Routers Reply?
Jan 2, 2013If your wireless indicator is flashing red when you discover the smurf, it can mean that someone has tried to logon with an incorrect password. this is not necessarily an attack, it could be someone you have allowed access too, who has forgotten the password? In this case entering the correct password will solve the problem.However putting your own MAC address into the filter will simply block your own machine.
View 6 Replies View RelatedRouters / Switches :: How To Install Two Wireless Routers In Series
Dec 31, 2012The first router is wired to the DSL modem and works just fine as an access point with Internet access. The second router is wired from the first router using one of the 4 ports on both router hubs. The second router is visible but has no Internet. How to configure the second router regarding DHCP, LAN, WAN, DNS etc.
View 3 Replies View RelatedRouters / Switches :: Connect 2 Wireless Routers Together
Jan 21, 2013I am trying to connect 2 wireless routers to expand my wireless signal. I want to connect the router 1 (in 2d floor) to a powerline av and then get the router 2 to the powerline (in the ground floor) so i can have wireless there too. I've tried some configurations i found online, but can't get to make the network functioning. The routers and powerline av are all dlink. I don't mind having 2 networks, but it would be better to have only one
View 4 Replies View RelatedRouters / Switches :: Want To Connect Two Routers Wireless
Sep 19, 2011I want to connect two routers wirelessly without running cables , any easiest way without cables.
View 1 Replies View RelatedRouters / Switches :: Connect 2 Subnets With Two Switches And One Router Using SIM Software?
Apr 23, 2011how to connect two subnets with two switches and one router using router sim software?
View 1 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.1 Authenticate Wireless Users With 802.1x
Jun 9, 2011I have an issue with an implementation, I had a ACS R5.1 that I'm using to authenticate the wireless users with 802.1x, that's OK and working fine. Now I want to use the same ACS to authenticate wired users using MAB (for IP phones, printers, servers, and other devices) and 802.1x (for corporate users). I already configured the authentication services (MAB and 802.1x) on ACS, but when I'm doing tests I can see that for example the phones are trying to authenticate using the 802.1x rules of wireless connection, not using the MAB rules. [code]
You could also see an screen from the ACS in the attached file. On the picture remark you could see a IP Phone trying to authenticate using the wireless Access Services insted of using MAB.
Cisco :: ACS 4.2 - Authenticate Wireless Users Via Windows
Mar 12, 2013we are using ACS4.2 to authenticate wireless users for ssid : copr-wireless. the acs authenticate users via windows database (acs is a member of the windows doamin) no local user defined in acs. there is a mapping between all windows users and a local group in acs (wireless_group) in wireless group i defined the vlan as 80 so that corp-wireless clients will be in vlan 80 and they can take an ip address from one DHCP server in the network. vlan 80 is in our core switch. the dhcp also.
now we added a guest anchor WC with ssid: guest-wireless. we need to auth guests also via ACS/Windows. guests are the same users as corp-wireless but corp for lan only and guest for internet only my prob is that ACS will map guests to vlan 80 because they are member of the domain, however guest users should not have any vlan. it is like if they are in DMZ. they will take ip address from the anchor WC.
Cisco Wireless :: ACS 5.3 Users Not Authenticate With Wi-Fi SSID
Aug 26, 2012i have configured acs 5.3. i integrated wth active directory also it got suceeded in test connection.but when am trying to conncet ssid its not getting authenticate, wat r the users i created on acs they can able to login on wifi ssid
View 6 Replies View RelatedRouters / Switches :: Daisy Chain 3 Switches And Not Have Ip Conflict?
Jan 31, 2011Is it possible to daisy chain 3 switches and not have ip conflict? I am running a public access network for a library. For certain library software I need for all workstations to see each other. I have 25 workstations in total and two separate management consoles. I have all workstations on two switches but one of the management consoles is on the third switch because when joined with the others it has an ip conflict. I need this console for the digital sender that is connected as well as to act as a server for go print software.
View 3 Replies View RelatedCisco Wireless :: WAP321 URL Redirect / Auto Authenticate
Jan 24, 2013I want to setup my wap321 to not go to the Captive potal login page ,I want everyone to be authenticated automatically. I just want them to be redirected to my home page the first time they try and visit any page.i have the CP setup but I dont see any way to not request a user page and just redirect.I am using the latest firmware.
View 2 Replies View RelatedRouters / Switches :: Put A Wireless Computing Behind Another One?
Mar 28, 2011I am trying to put a wireless router behind another router. I have DHCP on the wireless router disabled and connected wireless router LAN port to wired router LAN port. The wired ports on the wireless router work fine. The wireless signal strength is good and shows a good connection. But wireless connectivity to the internet is poor. Ping to the main router shows most packets are lost. I have assigned the wireless router an address outside the DHCP range but in the same group. Main router is 192.168.15.1, wireless is 192.168.15.2, DHCP range is 192.168.15.100 to 192.168.15.130. I though the router might be bad as it is an older one so I got a new one - same issue.Update - found the problem. The wireless on the old router was still connected and running. Had some trouble getting wireless turned off for it. First speedtest.net run on new wireless showed low download speed (0.35 Mbps) but later showed same as wired (1.3Mbps). Not sure why the first test was so low as I have tested several times and now get the higher number. The old router (DI-524) even seems to display its web interface slowly although the wired ports still seem to work ok at least LAN to LAN.
View 2 Replies View RelatedRouters / Switches :: How To Set Up Wireless Connection
Apr 15, 2013I am trying to connect my PC wireless.. But I am unable to do so. I am getting the error "Configuration failed".
View 4 Replies View RelatedSwitches :: Difference Between Wireless Routers?
Mar 13, 2013Difference between wireless routers.
g
n
d
what is the difference between these router and which is best? i have the linksys wireless g 54 mbs.
Routers / Switches :: How To Check Broadcast On Switches
Apr 26, 2011how to check and trouble shot broadcast issues on network
View 1 Replies View RelatedCisco Wireless :: 7500 Can Use Customer Radius Server In Order To Authenticate
Feb 5, 2013We use a Flex7500 with local switching and centeral authentication. My question is can i use the Customer's radius server in order to authenticate? or should my WLC have IP conncetivity to any radius server im adding?I guess what i'm really asking is should my WLC know the radius server or does the request can go back to the AP and from there to customer radius on his subnet?
View 6 Replies View RelatedCisco Wireless :: WLC 4404 Integration With LDAP To Authenticate Domain Users?
Feb 24, 2013I have a WLC 4404 with LWAPs, the customer has a microsoft LDAP and all users are joined to the domain and he wants the users to be authenticated against their domain accounts and this should be done automatically so that when users login to windows they are also authenticated and joined the WLAN.so how we can do that with the simplest way, without Radius server using only the LDAP and wwithout envolving any certificates.also i need to know when i add LDAP server to the WLC, how can i know that this LDAP is properly inegrated with the WLC?
View 8 Replies View RelatedCisco :: Authenticate Wireless 1242 AP To Switch Port With Dot1x Enabled?
Sep 12, 2007Trying to authenticate a Wireless 1242 AP to a switch port with Dot1x enabled. It seems like the switch can't get the mac or doesn't ever start authentication for the port when I plug in an ap. The ap is configured to pull dhcp on start for fa 0, however never gets an address, even though the port should fail into guest network after auth fails.Any thoughts,, a debug only shows this...
*Mar 1 00:19:27.127: %IF-3-VLAN_NOT_CONFIGURED: Received dot1Q VLAN tagged packet on interface which does not have VLAN configured.
Routers / Switches :: Wireless Won't Allow Network Gaming?
Sep 10, 2012I am currently playing Football manager 2011 with a friend via a network game. The game will work perfectly if I connect my Laptop to the modem directly and bypass the Wireless. However if I try to play the game while connected to the wireless then my friend is unable to connect to the game. This is becoming an issue as for me to be able to play the game I have to turn the wireless off which is getting on the nerves of other family members
View 1 Replies View RelatedRouters / Switches :: Can't Get Blue-ray To Connect To Wireless
Feb 12, 2012cant get my blue ray to connect to wireless. on network connection test it stops on gateway ping?
View 1 Replies View RelatedRouters / Switches :: Use Ip Webcam In Wireless Connection?
Aug 31, 2011I am using the android phone with software IP WEBCAM and it works fine to view video withiin the same wireless network for android phones and computers.I have to just type[URL] I want to use it to in my home ( Wireless Connection 1 )on my laptop to see the video of my office( Wireless Connection 2 ) using android phone, but the problem here is it says port forwarding should be enabled to wireless d-link 600 router and then the http:<ip address>:<port> should be accessed?
View 1 Replies View RelatedRouters / Switches :: Wireless And Wired Connection For The Same Set Of PCs?
Feb 1, 2012I have 3 PCs (win7-64) connected to a wired gigabit network to achieve fast transfer of large files. Separately, at a distance, I have a modem-router to access the Internet. Internet access for the 3 PCs is achieved with each PC connected wireless to the latter modem router. The 2 networks are running OK and PCs can connect each other on both networks. Question: How can I know and achieve that the gigabit network is used for file transfers and not the slower wireless network? How should configure both routers and PCs to achieve this? I don't need the wireless setup to be a network, just to provide wireless access for each PC and that's it. I used to have the gigabit LAN configured with a Dlink DAP1522 bridge that created a single wireless connection between this wired LAn and the modem-router but it stopped working and I'm pretty done with it.
View 10 Replies View RelatedRouters / Switches :: Can't Find Wireless Network
Jan 12, 2011i have 3 home computers using the same wireless router. 2 of them have no problems detecting and accessing internet. one computer can access at times, but many times cannot detect network. i have tried restarting my modem, the router, my computer etc. at times, it works, at times it doesn't. at times, it is ok, at other times it is not.
View 2 Replies View RelatedRouters / Switches :: Have Run Cat 5 To A Garage But Wireless Won't Work
Sep 21, 2012I have a cable modem in my house out of which i have a run of cat5 cable to an external garage with a terminatiion point on wall. if i run a cat 5 lead from the wall to back of laptop i can connect to internet but i want to connet a wireless router in the garage so i can use laptop wirelessly I have a buffalo air station router which worked perfectly in another area of house but when i run cable from socket in wall in garage to router it will not pick up internet?
View 3 Replies View RelatedRouters / Switches :: How To Convert From Wired To Wireless
Mar 20, 2011I'm trying to upgrade my existing Netgear wired router to a Netgear N600 wireless router. I was really hoping just to replug in everything and go. But because the wired router is setup for 192.168.1.1 when I plug in the wireless router it thinks nothing is plugged in because it too wants to use that IP address. How do I disable the wired settings
View 7 Replies View RelatedRouters / Switches :: Need To Get The Wireless Router To Work
Mar 28, 2011when i hook up all the cables to the router and computer the main computer dose not get internet and the laptop dose not get internet
View 1 Replies View Related