Routers / Switches :: Have Run Cat 5 To A Garage But Wireless Won't Work
Sep 21, 2012
I have a cable modem in my house out of which i have a run of cat5 cable to an external garage with a terminatiion point on wall. if i run a cat 5 lead from the wall to back of laptop i can connect to internet but i want to connet a wireless router in the garage so i can use laptop wirelessly I have a buffalo air station router which worked perfectly in another area of house but when i run cable from socket in wall in garage to router it will not pick up internet?
View 3 Replies
ADVERTISEMENT
Mar 28, 2011
when i hook up all the cables to the router and computer the main computer dose not get internet and the laptop dose not get internet
View 1 Replies
View Related
Jun 9, 2011
I have been trying to set up a home network to my detached garage office for personal use. I currently have a wireless network in my house but the distance from that router to my detach garage computer is too great to reach by normal, conventional means. The distance is approximately 100 feet through brick, glass, vinyl siding, drywall, etc. I am unable to relocate the router that controls the wireless network due to cabling issues plus I am not sure of the reliability of ethernet cable from the base router to garage. Currently I am running off two modems(one in garage and one in house) but the expense is ridiculous. Do you have any recommendations to get my garage desktop on the wireless network? Powerline adapters? Access Points/Repeater?
View 2 Replies
View Related
Jul 21, 2012
Here is my current setup:
Cable Modem>WNDR3700>CAT5E>WNDR3700
The last WNDR3700 is in my media closet at the other end of the house essentially serving as an AP. I get weak signal in the garage on a standard WiFi card. Thing is I am installing an IP camera soon, so I need ethernet connect ability. Hoping to not have to buy another WNDR3700 as they are pricey. The bottom line goal is to have a router or AP out in the garage to connect my IP camera. What would be the best way to accomplish this? Running a cable is out of the question price wise right now. I have no problem buying a directional antenna and pointing it towards the house, but this would require the router to have external antenna.
View 19 Replies
View Related
Jan 19, 2013
connect my new device and get it working as an extender?
View 2 Replies
View Related
Jan 28, 2011
I have a Linksys Cisco system router and cannot get it to work, I believe I have it hooked up right. I am wanting it for a Sylvania wireless mobile internet device.
View 1 Replies
View Related
Jan 1, 2011
When first set up, Linksys router works well but then when I reboot, it is not recognized and I get no computer connection. Read that I need to change an IP address.
View 5 Replies
View Related
May 12, 2011
I have a motorola usb modem which is connected to my laptop and i have shared the connection and have an ethernet cable from laptop to wireless modem (TP-LINK) such that other wifi enabled devices can connect to it.Now we have electricity blackouts and when that happens my wireless router gets turned off. Internet on the laptop is working fine, now when the electricity comes back and the wireless router is on, the net does not work on the other wifi devices and only my laptop (as its directly connected to the modem).I have to reboot my laptop for the shared connection to work.
View 2 Replies
View Related
Apr 5, 2012
basically, my iMac detects the extender as routername_EXT which is fine, but says that the password i type is wrong. when i use my original router with my iphone with the same password it works, but when i try to use it with my extender it says that the password is wrong.
View 1 Replies
View Related
Feb 1, 2012
Is it possible to change the firmware on my dl2670 router so i may use my 3g usb stick, as the router does have usb ports?
View 1 Replies
View Related
Feb 14, 2011
Until recently when we changed the router at work, I can access work files from my laptop and notebook from home. It seems the problem is probably from my home wireless router supplier by-aol as I can access work from my laptop anywhere else except my home. But then I have been able to do so until the work router was changed so i don't know what could be wrong?
View 1 Replies
View Related
Mar 5, 2011
I have a linksys wrt54gs wireless router (working fine since last 3 years) which connects to the internet fine if there is no password set. However if i set WEP password to protect the wireless connection, i am not able to connect to the wireless connection. Everytime i enter the passphrase, when trying to connect to the wireless network, it refuses to accept the password. I have tried this with 2 laptops (both running windows 7) and both have same issue.
View 2 Replies
View Related
Mar 28, 2013
I've been working on this for several days with no luck.I'm trying to setup CCTV DVR Security Cameras in my Barn/Garage. I am getting a good wireless signal from my home with an Alfa wireless usb adapter AWUSO36H connected to a Alfa router/Repeater R36, using this as a hotspot for my garage/barn. The house has a Time Warner
Cable Ubee Modem/Router.
[code]...
View 1 Replies
View Related
Jan 29, 2011
I want to setup an home network with a wireless router and use multiple switches for wired connections through out my home. I currently have an Airport extreme hooked up to a cable modem and a leviton gateway hooked up to the Airport. The 2 computers connected to the Leviton are on a windows 7 homegroup and share fine, but won't share or discover any wireless device connected to Airport. My main goal is to have a wireless/wired network with all computers sharing information with each other. I want 2-3 wired switches/gateways with a min of 2 devices connected to each, connected to my wireless router whiich is connected to cable modem.
View 3 Replies
View Related
Mar 19, 2011
My laptop is an Optima Centoris v662 and i recently had Microsoft service pack 3 installed over windows vista. ever since i did, my wireless radio turned off and the switches (fn f10 and the seperate switch just above the keyboard) wont work. my wireless card is a intel(R) PRO/Wireless 3945AGB but i dont think that is the problem.
View 1 Replies
View Related
Jan 2, 2013
If your wireless indicator is flashing red when you discover the smurf, it can mean that someone has tried to logon with an incorrect password. this is not necessarily an attack, it could be someone you have allowed access too, who has forgotten the password? In this case entering the correct password will solve the problem.However putting your own MAC address into the filter will simply block your own machine.
View 6 Replies
View Related
Dec 31, 2012
The first router is wired to the DSL modem and works just fine as an access point with Internet access. The second router is wired from the first router using one of the 4 ports on both router hubs. The second router is visible but has no Internet. How to configure the second router regarding DHCP, LAN, WAN, DNS etc.
View 3 Replies
View Related
Oct 17, 2011
I'm trying to ensure I have wireless coverage in my entire house and having extreme difficulty getting all machines to play nicelyWireless modem router #1 (downstairs in my house) is connected to the ADSL line and has the following config:IP Address = 192.168.1.1 DHCP on DHCP pool 192.168.1.3-192.168.1.100 Subnet = 255.255.255.0 Wifi channel = 1 Wireless router #2 (upstairs) is connected by ethernet cable to Wireless modem router #1 and has the following config:IP Address = 192.168.1.2 DHCP off Subnet = 255.255.255.0 Wifi channel = 11 Different SSID and encryption key to Wireless modem router #1 With this configuration, I can connect to the internet via both routers and all seems to be well. Except... having established a connection through either one, my machines will only make a pretend connection with the other one. By "pretend", I mean that the (Windows) machine says it has an excellent connection to the router but can only see machines on the LAN - it cannot get to the internet even though other machines are connected through the same router to the internet.
For example, if I'm sitting next to the downstairs router and establish a connection with it, all is well. Then I move upstairs and my machine switches to the upstairs router. Signal strength will be reported as "Excellent" and I'll be able to connect to the local NAS or printer but no external devices or sites.I have tried having the same SSID and wireless configuration on both but the result was the same.Today I read the suggestion to enable the DHCP server on the 2nd router but to set it to distribute a different non-overlapping IP range (i.e. router 1 can have a pool of 192.168.1.3-192.168.1.50, and router 2 can have a pool of 192.168.1.51-192.168.1.99)
View 4 Replies
View Related
Jan 21, 2013
I am trying to connect 2 wireless routers to expand my wireless signal. I want to connect the router 1 (in 2d floor) to a powerline av and then get the router 2 to the powerline (in the ground floor) so i can have wireless there too. I've tried some configurations i found online, but can't get to make the network functioning. The routers and powerline av are all dlink. I don't mind having 2 networks, but it would be better to have only one
View 4 Replies
View Related
Sep 19, 2011
I want to connect two routers wirelessly without running cables , any easiest way without cables.
View 1 Replies
View Related
Nov 23, 2012
I have just bought a n300 everything works well except i cant get my sky on demand wireless bridge to work , sky have said all ok, as have my broadband supplier. im told i need to maybe change my wireless settings in router !
View 2 Replies
View Related
Apr 23, 2011
how to connect two subnets with two switches and one router using router sim software?
View 1 Replies
View Related
Nov 30, 2011
I have a stack of SGE2010P switches with 3 vlans (1, 10 and 255) on it. Connected to it via a trunk port, I have a SF300-24P.On the trunk ports, I have vlan 1 untagged, vlans 10 and 255 tagged (on both sides, obviously).On the SGE2010 stack, I can set a ports primary vlan id to vlan 10, and workstations work correctly.On the SF300, if I set a port to type general, and the ports default vlan to 10 (on the port to vlan page), I cannot get any communication to work.This is my first time with a non-CLI switch, and am having real problems figuring out how to troubleshoot this problem.
View 1 Replies
View Related
Jan 31, 2011
Is it possible to daisy chain 3 switches and not have ip conflict? I am running a public access network for a library. For certain library software I need for all workstations to see each other. I have 25 workstations in total and two separate management consoles. I have all workstations on two switches but one of the management consoles is on the third switch because when joined with the others it has an ip conflict. I need this console for the digital sender that is connected as well as to act as a server for go print software.
View 3 Replies
View Related
Sep 24, 2012
My switch Cisco small business SG200-26G in modality link aggregation LACP the Wake On Line doesn't work !! (WOL work only in link aggregation non LACP..) I already upgrade the latest firmware but not resolved..
View 4 Replies
View Related
Jul 1, 2011
We've have a 2 SGE2010-48 port, stacked. 4 LAGS are denifed, two on primary, whitch are working, two on slave unit are NOT working. Devices connected to LAGS are de the same and same configuration (Cisco ASA 5510).
View 3 Replies
View Related
Feb 13, 2013
I received an SG300-MP as an RMA replacement for a Linksys SRW2008MP and I can't seem to get the SNTP to work.Previously on other devices I have only had to set the SNTP server name or IP address and that was it. So some of the options of the SG300 are foreign to me.So I first set
Administration > Time Settings > System Time > Main Clock Source (SNTP Servers) [X]
Then I set several SNTP server IP addresses
Administration > Time Settings > SNTP Unicast
SNTP Client Unicast [X] Enable
> Add
Other / 64.147.116.229 (nist1-la.ustiming.org)
Other / 24.56.178.140 (wwv.nist.gov)
Other / 128.138.141.172 (utcnist2.colorado.edu)
Other / 129.6.15.29 (time-b.nist.gov)
Some servers I set "Poll Interval" and some I didn't because I wasn't sure what this does.The status for all servers indicate "Down" with 31.12.1899 0.0.0 for the "Last Response"/I found those IP addresses via [URL] Also the setting
Administration > Time Settings > System Time SNTP Multicast / Anycast
I have disabled, and I don't know what this does either...
View 5 Replies
View Related
Mar 25, 2013
I have switche SGE2010P, router 871 and 3 cisco ip phone 7920. If cisco ip phone 7920 connected to switche SGE2010P then link is down. But if cisco ip phone 7920 connected to router 871 then link is up. In the log switche SGE2010P is not event about this.Why are cisco ip phone 7920 not work with switche SGE2010P?
View 3 Replies
View Related
Jul 13, 2011
Using a sg300-52 switch I created two VLANs that share a port for access to the internet. All original devices added to the VLANs are functioning correctly so I have to beleive the VLANs are set up correctly. I added a new desktop and an old laptop to the VLAN and neither worked. I was able to get the desktop to work by enabling VLAN tagging in the network adapter. The laptop is 5 years old and it does not have any such setting in network adapter. There are 2 other devices that share the same port with the laptop and they both function properly. My conclusion is that the laptop does not support VLAN tagging. Is there someway to configure the switch to account for this?
View 6 Replies
View Related
Jun 9, 2011
I have two SG300-20 Switches and buy two MGBLX1 Modules for the Switches.
I plugedin the Modules but the Modules didn`t work and in the WebConsole i can´t see the Modules.
Is there any configuration to enable the SFP Modules? or is it a problem from my Switches
View 3 Replies
View Related
Jul 10, 2012
i am trying to get a SG300 work as a router between VLAN's?So fare without any lock?Test setup one SG300 switch and 2 PC's ?Ping works from host to VLAN IP's, but not from host A to host B
Here is the host configuration
<TABLE style="BORDER-BOTTOM: #000000 1px solid; BORDER-LEFT: #000000 1px solid; WIDTH: 400px; BORDER-TOP: #000000 1px solid; BORDER-RIGHT: #000000 1px solid" class=jiveBorder border=1 cellSpacing=0 cellPadding=3 mcestyle="BORDER-BOTTOM: #000000 1px solid; BORDER-LEFT: #000000 1px solid; WIDTH: 400px; BORDER-TOP: #000000 1px solid; BORDER-RIGHT: #000000 1px solid">
[code]...
Here is the switch configuration
SG300 with FW 1.1.2.0 configuration i L3 mode
set system mode router
confip routing (needed on SG300??? - ti is on a 3560 i PacketTracer)
vlan databasevlan 5vlan 6vlan 7
[code]...
View 5 Replies
View Related
Mar 28, 2011
I am trying to put a wireless router behind another router. I have DHCP on the wireless router disabled and connected wireless router LAN port to wired router LAN port. The wired ports on the wireless router work fine. The wireless signal strength is good and shows a good connection. But wireless connectivity to the internet is poor. Ping to the main router shows most packets are lost. I have assigned the wireless router an address outside the DHCP range but in the same group. Main router is 192.168.15.1, wireless is 192.168.15.2, DHCP range is 192.168.15.100 to 192.168.15.130. I though the router might be bad as it is an older one so I got a new one - same issue.Update - found the problem. The wireless on the old router was still connected and running. Had some trouble getting wireless turned off for it. First speedtest.net run on new wireless showed low download speed (0.35 Mbps) but later showed same as wired (1.3Mbps). Not sure why the first test was so low as I have tested several times and now get the higher number. The old router (DI-524) even seems to display its web interface slowly although the wired ports still seem to work ok at least LAN to LAN.
View 2 Replies
View Related
Apr 15, 2013
I am trying to connect my PC wireless.. But I am unable to do so. I am getting the error "Configuration failed".
View 4 Replies
View Related
