i have a 2008 server that needs 80GB of data backed up over a VPN.i want to use backup exec 2012 i tried backing up the first 10GB but at the rate it will take two weeks to copy across we are upgrading our upload, but it still wont be viable i need to put the machine on the local network, do a full backup then point a differential backup to the same full backup (Anyway thats what i think should happen)
View 8 RepliesI understand that a full backup backs up everything, and a differential backs up all changes since a full backup, and an incremental backup backs up all changes since the previous incremental.My belief is that I can do a full backup on Sunday, then differentials Mon- Fri. Then, if everything crashes, I can restore the full, then the most recent differential (As opposed to a full restore, an a bunch of incrementals to catch up)My question is if I do a full backup on Sunday, on Tuesday user Mary creates a file, on Wednesday she deletes it by mistake, then on Friday she realizes it and calls me.Will that file still exist on Thursday night's differential? Or do I need to load up Wednesday night's backup?The reason I am asking is because I am trying to go off of tapes and use a NAS instead. I would like to have a Sunday full backup, then have one differential backup that gets overridden nightly, to save space.By doing this, I will only have a full backup and the most recent differential. The alternative is to have a weekly backup and 5 differentials, which takes up more space?
View 1 Replies View RelatedWith this Windows 7 & 8 needing storage device for ISO, looking for a better way to back'em up through my network... or having storage device attached to My router..?This is my router.. It has ReadyShare USB storage Access [URL] PDF Manual Router:[URL]I have available hardware 500Gb eBook device I can use???I also have a [URL]How to set these items up for best preference.
View 6 Replies View RelatedI've noticed, that ACS 5.1 is writing .gpg archives for backups. I'm about to upgrade an evaluation system and the Installation and Upgrade Guide tells me to do a full backup and restore in order to upgrade an eval to a production system. [URL] (second note in section "Evaluating ACS 5.1)
Question: can the production system sucessfully decrypt the backup? According to my personal gpg it is CAST5 encrypted with one passphrase. Is this passphrase constant for all ACS 5.x?
I'm configuring ACS for the first time and the config is complete and working, except backups of the view database. I've created a TFTP repositiory and if I perform a manual backup or wait for a scheduled one to occur it fails. I do get a .tar.gpg file in the TFTP server (but can not restore from it as it's not listed in "Restore" as a backup).
It works fine if I create and use a local disk repository. I get a .tar.gpg but also a catalog.xml and repolock.cfg file (which I don't in TFTP). Looking at the logs on the TFTP server I can see it tries repeatedly to read the catalog.xml file but fails:
Read request for file <DB/catalog.xml>. Mode netascii [15/07 16:05:52.167]
File <DBcatalog.xml> : error 2 in system call CreateFile The system cannot find the file specified. [15/07 16:05:52.167]
That seems correct, the file doesn't exist. However it never seems to try and create it.
I have a new installation of LMS 4.2 on the Soft Appliance and seem ot be only able to configure backups to the local disk? There is no option to select any of the configured repositories like there is in ACS. I can backup to /local disk, after change to filesystem as below:
chgrp casusers -R /local disk chmod 0775 /local disk
But the issue is, how to I get this off the box in an automated fashion so it can be part of our corporate backup schedule?
I have been trying, so far unsucessfully, to trigger backups to a TFTP server of our SGE201 switches. I have testesd TFTP backups via the web interface, and that does work. I need SNMP as I need a scriptable method to trgiger the backups on a regular schedule. I am running the SNMP query from a RedHat Linux server. So far I have the following query work out, but it is failing: [code] The error I am getting is generic, and the same query failed on multiple switches running Software Version 3.0.0.18. The switch is set with the community having full SNMP-admin access from the server's IP address.
View 3 Replies View RelatedI would like to schedule automatic backups of our ASA5500's OoO-hours:
1. SSH from secure server and create _FULL_ backup - what would be the CLI command(s) ?
2. SCP from secure server and retreive file(s) - what is the location of the file(s) ?
I had a pair of Dell R710's and need to revamp our battery backups badly. Having almost no budget has its difficulties.These are 2x 120v 2200 smart ups. The servers both run win2k8r2. Not looking for run time, looking for safe shut down. Thinking 1 server per.
View 19 Replies View RelatedAlthough I have no problem with backup/restore in ISA550 when I do it in the same device, I do have problems when restoring in one unit the backup of another unit, i.e. when cloning devices in order to avoid having to configure every device from scratch. Lets call A the master device and B and C the devices I try to clone (to save most of the configuration) to modify them later. I get two different situations here, but none of them works:
Situation 1.B reads without complaining the backup from A and gets the same configurations settings than A, but once modified appropriately to stablish a VPN Site-to-Site tunnel with A, ther is no way to make it work. Furthermore, this unit cannot be configured to VPN with A, even using the Site-to-Site wizzard (which resets all VPN settings).
Situation 2.C complaints when reading the backup from A and does not read it. However, this unit can be configured by hand using the wizzard and the VPN works fine.
So, I suspect that something in the backup identifies the unit in such way that VPN gets in troubles. What it does work is doing a FULL RESET of the unit B and then configure it manually.
I have reported the issue but the Cisco agent closed it simply saying that this cannot be done. I have serious dificulties believing that in you have N devices you have to do N configurations from scratch. I am aware that perhaps some codes must be removed before doing a backup, or that should be something like an "anonymous backup" for such objective, but I cannot accept that it is impossible to do.
I have a simple wireless network in my home run through a Linksys WRT54G Router connected to a cable modem. I set up a Western Digital 1TB external hard drive as a network drive through use of a Seagate FreeAgent DockStar. (The HD connects to the DockStar by a USB cable, which in turn connects to the router by an Ethernet cable.)
The hard drive functions as a network drive and I've configured Windows 7 Home Premium on my laptop computer to recognize it at start-up so it can essentially be used read and written to like a local drive.
Is there a way to make Windows 7, either by built-in software or third party software, automatically backup certain files or directories when changes are detected?
For example, I have a folder on my internal HD where I organize the vast amount of photos that I take so that I can easily find them through the operating system instead of having to go through a photo manager. In my ideal situation, something would be monitoring to see if I have made changes in only that folder (either adding new folders, deleting photos, or modifying files) and simultaneously make the changes to the network hard drive. Effectively, I want something to mirror the changes on my local hard drive on the fly and update the network hard drive accordingly. I do this all manually at the moment and it sucks up a lot of time that could probably be done automatically.
I have 30 switched in my corporate network it’s all up and running all switches running by default configuration and connected to WS-C4506 core switch our dhcp server pooling 192.168.100.1/27 network. Now we need to configure new Vlan for finance department this department has more than 200 users. If my server distributes 192.168.200.0 range ip can vlan2 automatically assign ip 200.0 addresses to finance department.All switches running default config no ip address assigned.
View 9 Replies View RelatedI need to replace an existing ASA 5540 with a new ASA 5525X. I would like to pre-stage and configure the new box with the existing config, migrate license and export certificate files before swapping it with the old one during a change window. The new firewall will run 9.1 on deployment. Now the same 7.2(4) cannot just be copied over to 5525X running the minimum 8.6 version. There is a Web based tool available at [URL] according to Cisco documentation but the page does not load for me (Cisco intranet only tool ?). Is there another tool for automatic conversion ?
View 3 Replies View RelatedI can't seem to get my DIR-655 up and running again.I had a DLINK DIR-655 hooked up via RJ-45 cable(s) to my AT&T U-Verse 3800HGV-B Gateway. The DIR-655 was serving as a wireless connection for my laptops and also as a wired networked all-in-one printer that was plugged into it.The Ethernet (RJ-45 cable) traveled from the gateway, through a 4-port switch, and then to the Internet (WAN) jack on the back of the DIR-655.There's a couple of wire- connected computers connected via that switch in between that's why it's there. At the DIR-655 end I had an HP Photo Premium AIO printer (Model: 309A) connected by wire; and of course, the two laptops would connect via that unit too. The laptops are WinXP and Win7.Everything worked fine... BUT, the upstairs iMac and a downstairs home office XP machine couldn't see the networked printer for some reason. That reason (apparently) is that the DIR-655 is part of a "separate network" or something.Well, long story short - I tried to adjust the settings on the DIR-655 but that didn't work and then I tried to go back, but that didn't work. So then I decided to just start from scratch to re-setup the whole thing but NOW I can't even access the router via a browser at url...
View 14 Replies View RelatedOur company is a small one and steadily growing towards mid size. We currently have about 200 or so users. Naturally we have run out of IP addresses and now we must redesign the entire IP schema.Initially our plan was to just implement a class B subnet for the whole network with certain ranges belonging to certain kinds of devices/machines/servers.Are there any cons to this? If so, could you link me to documentation that explains this?
View 4 Replies View RelatedI cannot seem to get the Wireless up and running, i have flicked the switch and but nothing happens, no light. I am computer illiterate when it comes to technical computer problems. What should i do? I can plug my yellow cable in and get the net but no wireless when i take it out. He has also given a Belkin G USB wireless adaptor.
View 8 Replies View RelatedSo I was wondering if there is something I can do so that I don't have to personally intervene whenever the hotspot turns off. It would be even nicer if it just stayed on 24/7, but I'm willing to settle for a macro or bat file that's scheduled to do this in the morning right before people wake up to their morning google.
So specifically, how to reconnect to my_hotspot_name via command lines instead of mouseclicks? That way I can make a bat file and schedule it to run at 5AM or something like that.
[code]...
I'm not sure how to tell if I'm running ssh version 1 or ssh version 2, or both.I thought a show run would show a line like, "ip ssh version 2" or "no ip ssh version 1", but I don't see these anywhere.
View 4 Replies View Relatedconnecting PRI to BRI interface on ISDN. I have all this information provided by the TELCO and i have configured it but due to some reason i am not able to connect them. I have given the questions with answers provided by the TELCO. I am also providing the running configuration of the PRI interface and also the error message i am getting when trying to test call itself.
1. Is the PBX designed for Pre-National or NI-2 protocol? -
Protocol using C7MATL
2. Are there any DID station numbers that your CPE cannot accept? -
No
(i.e. 0 or 9 in the 4th position)
3. Which carriers will be your choices for your PIC and LPIC? -
Carrier using DChannel
[code]....
But my wireless set up does not work. At all. I have a DIR-655 (obviously) linked to a DWA-130. I tried multiple configurations but STILL only get less than 1Mbps download speed.
View 14 Replies View RelatedWe have a workng NAC 4.9.0 environment. When looking through the documentaiton areas I only see setup info for VPN concentrator and NAC in band. Are there setup examples with an ASA runnign newer code (8.6). The second piece is that I have some confusion as to the CAS setup. If it is in-band should it be done as a Real-IP gateway? Or can i get away with L2 in-band? We come off of the ASA inside interface to the trusted side of the CAS. The untrusted side of the CAS goes to the LAN. The CAM is 4 routed hops away.
View 4 Replies View RelatedI am running LMS 4.1on a VM, it runs very slow, what specs my vm should be running to support this application?
View 2 Replies View RelatedI'm using a XP sp3 machine,dial-up. Was hoping to get connected to open/allowed wifi connection. Did some research, and a ALFA AWUS036h USB adapter looked like the one, good reviews.When I first plugged in and loaded software, it worked great as far as seeing 10-12 connections, and even showed as connected with strong signal on one open/allowed connection, but wasn't connected.Seems like the software doesn't run good, worked at first and I had netstumbler installed and 8-10 stations were showing there also,but after a reboot had no stations on mfg software, none on netstumbler, and never would show stations on XP Zero config., seemes the software got screwy after reboot.
View 1 Replies View Relatedinternet stopped working on computer after I ran combofix... other computers on the network work fine, just this one.. I've tried winsockfix for win7
View 11 Replies View RelatedI'm trying to go wireless with a desktop PC running Windows XP SP2. I've got a 2WIRE router which works fine when plugged into the computer via an ethernet cable. I purchased a Netgear N300 Wireless USB adapter and installed it - it seems to be working fine.
The trouble is that my wireless connection shows "limited or no connectivity," although the signal strength is "very good." When I try to repair the connection, it tells me that I could not be assigned an IP address.
At the moment I'm working via the Ethernet cable with no difficulty. why the wired connection works but the wireless (from the same router) doesn't, even though it should?
My internet has randomly been slow lately. It used to work fine at about 6.0 Mbps from speedtest.net but suddenly i'm barely getting 2 Mbps. I don't know why this has happened. I've been getting very high ping spikes during gaming making me unable to play. I've done a virus scan using Avast, and have come up with nothing.
View 18 Replies View RelatedI have done similar with cat5e in the past, but only operating at 100mb/s. The gigabit stuff I have done so far has had the power in a separate stud cavity.My structured wiring project will be installed in one stud cavity in the soon to be new home office. Not exactly using a structured wiring cabinet, but rather using a 7u wall mount relay rack bracket. The cabling will be entering using 2 separate header penetrations. One existing just inside on the right side of the stud cavity carries 110V 12/2 romex to a stud attached box / recepticle. The other side gets the new penetration, a minimum of 12" away. That's the one that the ethernet cable will pass through. The cable runs will run through the wall and through a brush plate, and then to the patch panel.
The Cat6 cable is UTP, and is marked for in wall use. This is the stuff with the spline if that matters.The romex, by code MUST be attached to the stud, and it is, the cat6 on the other hand is allowed to be loose in the wall. I do not plan on having enough slack in the wall for the cat6 to ever get closer than 8" from the romex, and no closer than 10" from the electrical box.Is that separation sufficient to avoid inductive noise on the ethernet cables? Like I said, I have done similar with Cat5e and no problems ever, but only attached to 10/100 networks. I can change stud cavities, but would rather stick with the one so that my ethernet, and power both can enter the rack cleanly.
Lost my wifi can see my router and connected via yellow cable. am on vista
View 2 Replies View RelatedThe only way we can use our Motorola router is unencrypted. I have gone into the router numerous times and reset it, unplugged it, retyped the WEP key, tried to shift to WPA and nothing works. None of three computers in the house will connect unless all encryption is off. We live in a good neighborhood on a cul de sac, don't get a lot of traffic through here, and know the immediate neighbors, but nothing is stopping a stranger with a laptop from sitting on the street and using our wifi. I've talked to the Comcast tech. The trouble just seems to be our boxes won't get past the WEP encryption stage.
View 8 Replies View RelatedWindows firewall settings cannot be displayed because the associated service is not running
View 4 Replies View RelatedI have 2 programs located and running of 2 different servers (both server 2003)due to the nature of the company I work for I cannot say what the progams are. Now how our network is set up is Program 1 runs and server 1 and program 2 runs on server 2. server 1 and 2 and all user pc's are connected to a domain run by server 3. The programs 1+2 are installed on user computers and connected to thier respective servers to run. now the problem is program 1 kicks a random number of users off everyday at 10:15AM and program 2 does the same but at 12:45. its the same time and its every day. I have checked all servers for errors or conectivity issues and have found nothing.
View 4 Replies View RelatedBoth run Win 7; both use lan conections to the same router (Linksys 310N). Both get to the internet. And while the network map shows both of them, they are both unreachable. BUT NOT ALWAYS. Sometimes, maybe after several hours of uptime, they can access eachother. And the printers, which are wired into the desktop, then can be used by the notebook. BUT not always. Like now, all my printers are "offline" as far as the notebook is concerned.There are also wireless connections but currently I don't use them. Both machines are on the same-named connection. Homegroup doesn't work at all on either computer. I would really like to print from the notebook. All the printers are wired into the desktop. All are shared. Yesterday I could print from the notebook. On occasion, the homegroup shows both computers but hasn't for a while. In File Explorer, on the notebook, not even the notebook appears under the Network icon.
View 7 Replies View RelatedAt home we have a BT broadband connection. My girl friends work pays for it as she needs to get on to the office servers, this is secure thought a modem box and also a firewall box. This is restricted our personal internet access to only certain sites on her work laptop. I myself work for myself and need to access the internet via my laptop (mac), I'm a web designer so rely on the internet.If I was to buy an addition wireless modem could I unplug the work configured set-up at the wall, plug in the new one and set it up? I don't need to run the two modems at the same time, so could just swap the plugs as and when required.
View 2 Replies View Related