Program Running On Server Keeps Dropping
Nov 2, 2011
I have 2 programs located and running of 2 different servers (both server 2003)due to the nature of the company I work for I cannot say what the progams are. Now how our network is set up is Program 1 runs and server 1 and program 2 runs on server 2. server 1 and 2 and all user pc's are connected to a domain run by server 3. The programs 1+2 are installed on user computers and connected to thier respective servers to run. now the problem is program 1 kicks a random number of users off everyday at 10:15AM and program 2 does the same but at 12:45. its the same time and its every day. I have checked all servers for errors or conectivity issues and have found nothing.
View 4 Replies
ADVERTISEMENT
Aug 11, 2011
Ive resonantly installed windows network monitor and have come across a problem. I'm sure this is common problem at least on xp anyway. So i have a unknown program running and process explorer can't pick it up,im guessing this is a windows program. When looking into the info NWM provides most are from sites advertising
View 3 Replies
View Related
Dec 20, 2010
My motherboard ethernet port went bad, so I purchased a Netgear GA311 ethernet card. The issue is that Win7 wouldn't natively add driver support, though reviews indicated this card might be plug & play. Not so, and the driver disk even though it has 64 bit drivers will not run the install program at all. On top of that, the ethernet card does not appear in the Device Manager so I can backdoor the drivers into place.
View 8 Replies
View Related
Mar 6, 2011
I regularly perform updates on servers and this normally requires a reboot. I would like to be able to inform my customers when the server is back ASAP. Is there a program that continuously tries to remote to the server until it does or is there a script I can add to the server to send me notification of when the server ia back up?
View 2 Replies
View Related
Jul 11, 2011
My Network is running Windows Server 2003 and with more than 150 Users. But last week, I notice that a program is changing my DHCP server IP Address scope.
View 2 Replies
View Related
Feb 22, 2011
We have a new Toshiba laptop running Windows 7 PremiumWe have a sitecom modem router which is fairly new and already providing wireless to 2 other computers.I have connected to the router with the new laptop but for some reason it keeps dropping off the network, either saying "limited access" or "no internet access"t is well within range so I cannot understand why it keeps dropping off the connectio
View 11 Replies
View Related
Apr 15, 2013
1. Apple extreme router. Newest model. Full updates.
2. HP media smart server 495 running WHS 2011. Upgraded memory. Very stable and full updates.
3. Typical Win7 gaming machine from last year. It was about $1200 at the time, no issues.
4. Cat5e cabling.
5. A gigabit switch, but both the win7 and server are connected to the router.
I'm only asking about WIRED issues. When I'm copying files from my computer to server using teracopy I'm only getting about 10-11 Mb. Consistently.
I had made a thread earlier about getting a new synology server but could I have a more fundamental issue? Reason I'm asking, I copied a file from my wireless laptop to my server and it was almost 1/2 the time for the same file from win7 to server. I'd love to get the synology but kinda hard to justify $1000+ when things seem to be stable.
View 9 Replies
View Related
Apr 18, 2013
I have "Xtreme" internet service with Time Warner Cable, and it isn't so Xtreme. The modem/wireles router is the Ubee DDW3611.I was doing some work earlier this morning, and the lawn mower guy was here in the back doing his thing. All of a sudden the internet goes out. I see that damn dreaded yellow exclamation mark in the taskbar superimposed over the wireless internet icon. My first thought was that the lawn dude ran over some wires.I went outside to see if any wires were exposed or had been damaged. I noticed about a yard of wire was exposed above ground, but did not appear to have any damage.Anyway, I've been trying for the past few hours to fix this darn thing (before the technician gets here around 4pm). I've tried all the simple stuff like reset the modem, restart, mess with dns settings, but I have no idea where to go after this.
Here is what I get when I go to cmd > ipconfig /all:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Xenfi_Javier
Primary Dns Suffix . . . . . . . :
[code]....
View 6 Replies
View Related
Oct 31, 2011
I set up the router in our office and all is working well. BUT, when I have to FTP from my pc to our web server wich is at a typical web hosting company, now we are having time out issues, stalls, an closed sessions.Our server company checked everything and all is clear. I can FTP from outside my office (home) with no issuies at all. So this leads to the E3000 causing the issue. Simply everythign worked on Thursday, we installed on Friday and now we have the issue.
View 3 Replies
View Related
Feb 10, 2011
If the hostnames are the same - can I restore the backup file from a wcs 5.2.148.0 instance on a different wcs instance running wcs 6.0.196.0?
View 1 Replies
View Related
Mar 23, 2012
have about 40 clients connecting to my server 2003 in my office. We have 2 other remote office so those clients connect by RDP. We have been having a strange issue where users loose connection out side the office but the people in the office say connected. The people that stay connected however can not reach Google or use outlook. When this happens I have to restart the server and then everything works fine. When the internet seems to go down we still can print (in office) and I can ping the server, workstations etc. I however cant ping my sonic wall or my gateway. My isp and I have had runarounds and they swear it is not them. They keep telling me we have not lost connection with them in over 14 days.
I do however want to learn towards a broken nic card or a messed up DNS. When I do nslookup it gives me a time out error and sayscant find server name for address 107.7.59.210Default server:unknown 107.7.59.210..I did not set this server up. The lady who did is no long with the company.[CODE]
View 12 Replies
View Related
Oct 28, 2011
How to be able to get AP1252AG-E-K9 running against Microsoft Windows Server 2008 R2 IAS.I am getting these errors:
RADIUS/DECODE: convert VSA string; FAIL
RADIUS/DECODE: cisco VSA type 1; FAILRADIUS/DECODE: VSA; FAILRADIUS/DECODE: decoder; FAIL
RADIUS/DECODE: attribute Vendor-Specific; FAIL
RADIUS/DECODE: parse response op decode; FAILRADIUS/DECODE: Case error(no response/ bad packet/ op decode);parse response; FAIL
View 2 Replies
View Related
Sep 6, 2011
I came across a situation where a client had an old PIX 525 running PIX 6.2. There was a Windows 2008 R2 server running Exchange 2010 that was having trouble delivering email to a handful of email servers. We then found out that we could telnet to these servers on port 25 but got no return traffic. We then went back the old email server that was running Windows 2003 Server and could telnet to port 25 on these email servers and got a response, saw the banner and could issue commands. The first thought was reverse DNS which we thoroughly checked and it was not. I turned off the smtp fixup protocol and that didn't fix it either. From workstations on the network running XP or Windows 7 or Linux you could telnet to these servers and you would get a response but just not with 2008 server. I spent hours on the phone with Cisco support and it was determined that the packets were returning and we could capture the packets on the outside interface but they were then dropped by the firewall. Using the 6.2 version of PIX we could not determine why the packets were being dropped. I suggested upgrading to the next major version to be able to troubleshoot the issue further. We then upgraded the PIX to version 7.0(8). After the upgrade we were able to telnet to the problem mail servers from Windows 2008 Server and there were no issues. Is there a know issue with Windows 2008 Server and PIX 6.2?
View 1 Replies
View Related
Jul 8, 2008
I recently purchased a rvs 4000 wired linksys router for my business. Everything works great with the exception of my VOIP PBX server. I can receive a call and make a call one at a time. If a second line rings in and is picked up the first call and the second go dead air. I am sure that it is a security setting somewhere that I just can't seem to figure out. I sure would like to get some direction on this.
View 2 Replies
View Related
Jun 11, 2013
I have 30 switched in my corporate network it’s all up and running all switches running by default configuration and connected to WS-C4506 core switch our dhcp server pooling 192.168.100.1/27 network. Now we need to configure new Vlan for finance department this department has more than 200 users. If my server distributes 192.168.200.0 range ip can vlan2 automatically assign ip 200.0 addresses to finance department.All switches running default config no ip address assigned.
View 9 Replies
View Related
May 7, 2013
I need to replace an existing ASA 5540 with a new ASA 5525X. I would like to pre-stage and configure the new box with the existing config, migrate license and export certificate files before swapping it with the old one during a change window. The new firewall will run 9.1 on deployment. Now the same 7.2(4) cannot just be copied over to 5525X running the minimum 8.6 version. There is a Web based tool available at [URL] according to Cisco documentation but the page does not load for me (Cisco intranet only tool ?). Is there another tool for automatic conversion ?
View 3 Replies
View Related
Sep 16, 2011
I use program to connect to internet, named SSH or something. So in that program, I will need to fill the 'port server','IP server', 'port proxy', and 'IP proxy', then click connect. After that a black box similar to CMD box will come up(see image below) and I will be able to surf the internet. I can use IE, firefox, and Steam. But some program like Kaspersky, Yahoo messenger, MSN, ventrilo, teamspeak and the rest won't work at all.
View 11 Replies
View Related
Sep 22, 2011
Why i cannot log in to my vpn program.i successfully installed and run it.. but the problem is i cannot log in.. and my computer will pop up error message..
View 1 Replies
View Related
Feb 24, 2012
I use Sage to update my stock on a PC in my back room.I want to access that PC and open the sage program from another 2 PC's, add data, save etc.I thought a simple network would do it but not quite. I have three PC's in different parts of the building.I can see all three PC's and share files, printers etc, but not sure how to execute and run the program through the network on the back PC.I didn't want to set-up a server but in a way this looks like what I need to do.How much more after what i've set-up as a network with all sharing and internet connections etc do i need to do?I'm thinking if i use the PC the program is on as the server, how would i be able to execute the program from another PC in the network.
View 14 Replies
View Related
Sep 8, 2011
I have a dell powerconnect 3448 and am trying to find a good program to use to manage the switch.
View 7 Replies
View Related
Apr 1, 2011
laptop access (via wireless router) to program data resident on my PC. The subject program is installed (frequently updated) on my PC (Windows XP). Laptop (also Windows XP) use of this data for viewing and printing is the objective -- without also installing the program on the laptop. (The catch is frequent updates.)
Both units have access to broadband; direct for PC and wireless router for the laptop. Have no problem also installing program on laptop, if needed: laptop access to current data is the issue. Even doing so via internet would be great. It seems that LAN and Broadband networks are both in play though I don't quite grasp any inherent conflicts.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 2.80GHz, x86 Family 15 Model 2 Stepping 9
[Code].....
View 7 Replies
View Related
Nov 25, 2012
Let me start by saying i know pirating is wrong. Dont tell me i shouldn't do it. I download TV shows so i can watch them when i want.Okay, With the Six Strikes Program set to start this week. Major ISP's like AT&T and time Warner are going to start sending you stuff when you download torrents. And throttling your bandwidth after so many times.
View 2 Replies
View Related
Jan 29, 2011
i want to connect two computers to run the same program, they are conneted to a router and both have internet. i doing this for tax season and i want them to run the same program and have the same information on them.
View 5 Replies
View Related
May 29, 2012
My friend is trying to open port 88 and it says this specific message "The specified ports are being used by other configurations".I did a netstat, netstat -a, and another netstat that i forgot and we could find anything on his computer using port 88.His router is a Netgear wndr3400.
View 5 Replies
View Related
Dec 9, 2011
I need to know if PC Anywhere will work for the IMac and if not, what is the equivalent remote access program for the IMac?
View 1 Replies
View Related
Feb 11, 2013
I want to force a certain program (Max Payne 3) to use the third and forth DNS's that I configured in advanced settings of DNS settings (Windows7).
I want to do this because for some reason, using Google DNS in Turkey makes the game not start forcing me to use the DNS servers of my Internet provider. (if only it tried the second DNS that I configured, it would start but for some reason it does not)
View 2 Replies
View Related
Feb 9, 2012
Is their a program i can use to see who is doing what then disable their monitor keyboard and mouse. I work for my college/student and i am the assistant admin, my teacher gave me full admin privileges. I would like to have this as untended program where they cant change any thing stays hidden in the back ground. I used team viewer but i have to have them to log each one.
View 2 Replies
View Related
Aug 21, 2011
My school forces me to install an enterprise security program in order to connect to their network and get online. Its very bloated, and i can't edit the settings, they make it scan my computer everyday and so on.I want to use my OWN security program which i bought (norton).Is there any way to work around this requirement to get online on their network?
View 2 Replies
View Related
Jan 24, 2011
I have a program Eric's Movie Data Base. It needs to go to IMDB to update very often.On my XP there is no problem, it connects quickly every timeHowever I need to run it on my laptop with vista with a wireless connection.Using Vista the program EMDB runs ok but cannot connect to the IMDB site via the program.I have checked and firewall is off, and UAC also.As xp has no problem ( both are usin the same router) I can only assume Vista is blocking it.The request is reaching my modem, and the router is not using any port forwarding.Error message in log isFIREWALL replay check (1 of 24): Protocol: ICMP Src ip: 94.64.148.77 Dst ip: 58.166.25.196 Type: Destination Unreachable Code: Port UnreacheableI have contacted the developer who says the program is using the IE engine.
View 14 Replies
View Related
Feb 25, 2013
I heard that the belkin n750 was good for gaming, but i cant seem to connect with 5ghz which i believe is alot faster than 2.5ghz, but yeah i would like to know how to configure my router to improve my game speed and performance.
View 3 Replies
View Related
Jul 4, 2011
Lost CD used to download program and website is not facilitating in resetting password.....
View 2 Replies
View Related
Jun 8, 2012
i just got a used cisco 877 from ebay, the router i got not reponding to ping, and not picking up adsl signal, i ask the seller for a refund, the seller told me i must use aux cable to program, i had a cisco 857, which can be program through ethernet on default setting. is cisco 877 a lot different than 857?
View 1 Replies
View Related
Mar 9, 2012
I have two windows.Windows XP and seven.My Windows XP cant connect to the internet.I was downloading a file With IE when my ISP experienced problems and my internet was shut down.Internet explorer was not responding and finally crashed my whole computer.from then on no programs like IE ,Google Chrome , Firefox or even VPN and Dial-up connections can get me connected to the internet. I installed windows seven and internet works fine there but MANY of my programs are on the xp and i'm more familiar with that windows. How to connect that to the internet? [code]
View 3 Replies
View Related
