Networking :: Netgear GA311 Not Running Install Program At All
Dec 20, 2010
My motherboard ethernet port went bad, so I purchased a Netgear GA311 ethernet card. The issue is that Win7 wouldn't natively add driver support, though reviews indicated this card might be plug & play. Not so, and the driver disk even though it has 64 bit drivers will not run the install program at all. On top of that, the ethernet card does not appear in the Device Manager so I can backdoor the drivers into place.
View 8 Replies
ADVERTISEMENT
Nov 2, 2011
I have 2 programs located and running of 2 different servers (both server 2003)due to the nature of the company I work for I cannot say what the progams are. Now how our network is set up is Program 1 runs and server 1 and program 2 runs on server 2. server 1 and 2 and all user pc's are connected to a domain run by server 3. The programs 1+2 are installed on user computers and connected to thier respective servers to run. now the problem is program 1 kicks a random number of users off everyday at 10:15AM and program 2 does the same but at 12:45. its the same time and its every day. I have checked all servers for errors or conectivity issues and have found nothing.
View 4 Replies
View Related
Aug 11, 2011
Ive resonantly installed windows network monitor and have come across a problem. I'm sure this is common problem at least on xp anyway. So i have a unknown program running and process explorer can't pick it up,im guessing this is a windows program. When looking into the info NWM provides most are from sites advertising
View 3 Replies
View Related
Dec 13, 2012
I need to update code on my 5400 class HP Procurve's,We think we have ID'd that as what we want to move to, any large # of 5400 and 3500's out in the world on that code, or on another code because they ID'd this as bad
View 8 Replies
View Related
Oct 8, 2012
I'm using a dell Inspiron 1545 with windows vista home premium x64 bit. I recently had to reinstall the operating system due to some severe problems, and ever since, when I try to connect to a network it says "windows could not find any networks", so I hit diagnose, and it said that no wireless networking hardware is installed and configured on my computer.
View 11 Replies
View Related
Mar 26, 2011
URL ,A Netgear WNDR3700 for only $80? Everywhere else I have looked they've been over $100.
View 2 Replies
View Related
Aug 27, 2011
I've decided I want to hard wire all my stuff in our family room; however, the modem and router are upstairs in my office. I've got a few options available and wanted to get some opinions from those who have tried any of them. Here are my three options:
1) Install NETGEAR MCAB1001 MoCA Coax-Ethernet Adapter Kits
2) Install Monster PowerNet 300 Power Line Network Modules
3) Run the Ethernet cables through the wall, under carpet, etc.
I'm primarily looking for info about the speed differences, ease of troubleshooting, etc.
View 19 Replies
View Related
Jan 4, 2012
I have the Netgear 4000 as primary router and I want to connect my second router WRT54GL running tomato firmware to my network.
View 2 Replies
View Related
Apr 3, 2012
how to wire a netgear n600 to a U-verse router in order to strengthen the wifi signal
View 1 Replies
View Related
May 16, 2011
I have forgotten my Netgear security/passphrase. How can I retrieve the original key or install a new one?
View 2 Replies
View Related
May 9, 2011
I have two Dell latitude xpi computers that I am trying to get to the internet. Both work well except for making the connection to the internet. The w95 computer is using version 4.0a. I am using a Netgear ma401 pcmcia card. When looking at the the signal strenght it says excellent and everything seems go until you click IE icon (5.5). I comes back stating that it could not connect. The same is true for the w98SE machine. Same wifi card and same results. The card is good and the computer is good, but I have not set something correctly.
View 13 Replies
View Related
Dec 14, 2010
8 Port Gigabit Switch, HP 1810-8G, Netgear GS108Tv2 and Dell PowerConnect 2808, which one is better for LACP Link Aggregation?
The Netgear GS108Tv2 has more function than the other two, but I don't know the Netgear is stable or not?
View 5 Replies
View Related
May 21, 2011
Currently, I have 2 Apple Airport Extremes, and 1 Wireless Netgear ADSL Router. The 2 AAEs are connected separately to the router, and this allows us to get coverage in most part of the house (it's a large house with concrete and granite walls). I also have a HP Officejet 8500 'wireless printer' that is wired to the router as you can only print to the printer when it's in standby with a physical connection to the router (that's a different story). So my goal is to replace everything as the router is slowly dying and as a result of this, I want to be able to access the Internet wirelessly throughout the house, and be able to print from any where in the house without anything connected via cables. And as a bonus, I would like the Internet to be accessible 100 yards/metres down the garden (workshop is there). Basically, blanket coverage!
View 3 Replies
View Related
Sep 26, 2011
Is it possible to insert a Netgear wireless router b/g 108Mbs into a running 2008r2 network, making it a slave to allow wireless access?
At the moment the menu is only accessible thru 192.168.0.1, but I need to have it visible as a device subservient to 10.151.48.1? If this is possible, I can set it up to do a SSID broadcast for wireless access?
View 9 Replies
View Related
Jun 30, 2011
How do i install a netgear wireless router on dell dimension 4600c....I want to make it so laptop can pick up a wi fi signal
View 1 Replies
View Related
Nov 24, 2012
I am having trouble setting up my Netgear N600 dual band wireless router as a repeater to my Lynksys EA2700 (main wireless router).
I am doing this because the main wireless router is in the "Man Cave," as I am a girl- I call it simply "The Cave." Anyway, the range on the N600 is supposed to be great. But from where it sits to where I sit and use my laptop or tabel is about 250 feet and goes through about 5 platered walls- so super thick.
View 2 Replies
View Related
May 29, 2011
I have an Acer AX3400 (windows 7). I'm trying to install wireless router Netgear WNR3500v2. I did not succeed sofar. Do I have to uninstall NVIDIA drivers first?
View 1 Replies
View Related
Jun 11, 2013
I have 30 switched in my corporate network it’s all up and running all switches running by default configuration and connected to WS-C4506 core switch our dhcp server pooling 192.168.100.1/27 network. Now we need to configure new Vlan for finance department this department has more than 200 users. If my server distributes 192.168.200.0 range ip can vlan2 automatically assign ip 200.0 addresses to finance department.All switches running default config no ip address assigned.
View 9 Replies
View Related
May 7, 2013
I need to replace an existing ASA 5540 with a new ASA 5525X. I would like to pre-stage and configure the new box with the existing config, migrate license and export certificate files before swapping it with the old one during a change window. The new firewall will run 9.1 on deployment. Now the same 7.2(4) cannot just be copied over to 5525X running the minimum 8.6 version. There is a Web based tool available at [URL] according to Cisco documentation but the page does not load for me (Cisco intranet only tool ?). Is there another tool for automatic conversion ?
View 3 Replies
View Related
Oct 23, 2011
I recently installed a very basic version of XP on my old laptop (Gateway MT3707).After hours of searching for the correct drivers, I found them, and installed them. After installing the correct drivers for wireless internet I was able to pull up the list and find my network on it.When double clicking on our wireless network it asks for a network key (also called WEP key or WPA key).Now we have a password for our network, but after an exhausting amount of tries that won't work. I not sure if that is what its looking for. In our apartment we run mac OSX, windows vista, etc., but usually the password for the network is satisfactory. I have never ran into this problem.I hate to be a noob, but I don't know where to go from here.
View 6 Replies
View Related
Sep 16, 2011
I use program to connect to internet, named SSH or something. So in that program, I will need to fill the 'port server','IP server', 'port proxy', and 'IP proxy', then click connect. After that a black box similar to CMD box will come up(see image below) and I will be able to surf the internet. I can use IE, firefox, and Steam. But some program like Kaspersky, Yahoo messenger, MSN, ventrilo, teamspeak and the rest won't work at all.
View 11 Replies
View Related
Sep 22, 2011
Why i cannot log in to my vpn program.i successfully installed and run it.. but the problem is i cannot log in.. and my computer will pop up error message..
View 1 Replies
View Related
Feb 24, 2012
I use Sage to update my stock on a PC in my back room.I want to access that PC and open the sage program from another 2 PC's, add data, save etc.I thought a simple network would do it but not quite. I have three PC's in different parts of the building.I can see all three PC's and share files, printers etc, but not sure how to execute and run the program through the network on the back PC.I didn't want to set-up a server but in a way this looks like what I need to do.How much more after what i've set-up as a network with all sharing and internet connections etc do i need to do?I'm thinking if i use the PC the program is on as the server, how would i be able to execute the program from another PC in the network.
View 14 Replies
View Related
Sep 8, 2011
I have a dell powerconnect 3448 and am trying to find a good program to use to manage the switch.
View 7 Replies
View Related
Apr 1, 2011
laptop access (via wireless router) to program data resident on my PC. The subject program is installed (frequently updated) on my PC (Windows XP). Laptop (also Windows XP) use of this data for viewing and printing is the objective -- without also installing the program on the laptop. (The catch is frequent updates.)
Both units have access to broadband; direct for PC and wireless router for the laptop. Have no problem also installing program on laptop, if needed: laptop access to current data is the issue. Even doing so via internet would be great. It seems that LAN and Broadband networks are both in play though I don't quite grasp any inherent conflicts.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 2.80GHz, x86 Family 15 Model 2 Stepping 9
[Code].....
View 7 Replies
View Related
Mar 6, 2011
I regularly perform updates on servers and this normally requires a reboot. I would like to be able to inform my customers when the server is back ASAP. Is there a program that continuously tries to remote to the server until it does or is there a script I can add to the server to send me notification of when the server ia back up?
View 2 Replies
View Related
Nov 25, 2012
Let me start by saying i know pirating is wrong. Dont tell me i shouldn't do it. I download TV shows so i can watch them when i want.Okay, With the Six Strikes Program set to start this week. Major ISP's like AT&T and time Warner are going to start sending you stuff when you download torrents. And throttling your bandwidth after so many times.
View 2 Replies
View Related
Jan 29, 2011
i want to connect two computers to run the same program, they are conneted to a router and both have internet. i doing this for tax season and i want them to run the same program and have the same information on them.
View 5 Replies
View Related
May 29, 2012
My friend is trying to open port 88 and it says this specific message "The specified ports are being used by other configurations".I did a netstat, netstat -a, and another netstat that i forgot and we could find anything on his computer using port 88.His router is a Netgear wndr3400.
View 5 Replies
View Related
Dec 9, 2011
I need to know if PC Anywhere will work for the IMac and if not, what is the equivalent remote access program for the IMac?
View 1 Replies
View Related
Feb 11, 2013
I want to force a certain program (Max Payne 3) to use the third and forth DNS's that I configured in advanced settings of DNS settings (Windows7).
I want to do this because for some reason, using Google DNS in Turkey makes the game not start forcing me to use the DNS servers of my Internet provider. (if only it tried the second DNS that I configured, it would start but for some reason it does not)
View 2 Replies
View Related
Feb 9, 2012
Is their a program i can use to see who is doing what then disable their monitor keyboard and mouse. I work for my college/student and i am the assistant admin, my teacher gave me full admin privileges. I would like to have this as untended program where they cant change any thing stays hidden in the back ground. I used team viewer but i have to have them to log each one.
View 2 Replies
View Related
Aug 21, 2011
My school forces me to install an enterprise security program in order to connect to their network and get online. Its very bloated, and i can't edit the settings, they make it scan my computer everyday and so on.I want to use my OWN security program which i bought (norton).Is there any way to work around this requirement to get online on their network?
View 2 Replies
View Related