Ive resonantly installed windows network monitor and have come across a problem. I'm sure this is common problem at least on xp anyway. So i have a unknown program running and process explorer can't pick it up,im guessing this is a windows program. When looking into the info NWM provides most are from sites advertising
View 3 RepliesI have 2 programs located and running of 2 different servers (both server 2003)due to the nature of the company I work for I cannot say what the progams are. Now how our network is set up is Program 1 runs and server 1 and program 2 runs on server 2. server 1 and 2 and all user pc's are connected to a domain run by server 3. The programs 1+2 are installed on user computers and connected to thier respective servers to run. now the problem is program 1 kicks a random number of users off everyday at 10:15AM and program 2 does the same but at 12:45. its the same time and its every day. I have checked all servers for errors or conectivity issues and have found nothing.
View 4 Replies View RelatedMy motherboard ethernet port went bad, so I purchased a Netgear GA311 ethernet card. The issue is that Win7 wouldn't natively add driver support, though reviews indicated this card might be plug & play. Not so, and the driver disk even though it has 64 bit drivers will not run the install program at all. On top of that, the ethernet card does not appear in the Device Manager so I can backdoor the drivers into place.
View 8 Replies View RelatedI have two core switches - 4506E, and i noticed there are frequent cpu spikes on both of the cores switches. As its spikes intermitendly i couldnt able to anlyze the issue. I need inputs on the following,
1) Is there any Free CPU process monitoring tools to identify which process is spiking ?
2) Troubleshooting techniques to identify the issue.
I have 30 switched in my corporate network it’s all up and running all switches running by default configuration and connected to WS-C4506 core switch our dhcp server pooling 192.168.100.1/27 network. Now we need to configure new Vlan for finance department this department has more than 200 users. If my server distributes 192.168.200.0 range ip can vlan2 automatically assign ip 200.0 addresses to finance department.All switches running default config no ip address assigned.
View 9 Replies View RelatedI need to replace an existing ASA 5540 with a new ASA 5525X. I would like to pre-stage and configure the new box with the existing config, migrate license and export certificate files before swapping it with the old one during a change window. The new firewall will run 9.1 on deployment. Now the same 7.2(4) cannot just be copied over to 5525X running the minimum 8.6 version. There is a Web based tool available at [URL] according to Cisco documentation but the page does not load for me (Cisco intranet only tool ?). Is there another tool for automatic conversion ?
View 3 Replies View RelatedMy pc isn't picking up any wireless connections even if they have no pass on them. I don't know what the cause is I trouble shooted my wireless network connection driver 3 times I uninstalled it and reinstalled it and nothing happened. Updated it too. I even tried doing a roll back but still nothing. And when I checked the driver it says device working properly. I have a Toshiba satellite, windows xp.
View 13 Replies View RelatedI have a CME that has a FXO card, I can call the CME's number from an on-site phone and it works just fine, but when I try from my cell phone it picks up but doesn't give the dial-tone like it's suppose to, but if I hook an analog line to the phone line I can call that no problem from my cell?
voice-port 0/0/0
supervisory disconnect dualtone mid-call
secondary dialtone
timeouts call-disconnect 2
timeouts ringing 30
timeouts wait-release 2
timing hookflash-out 500
caller-id enable
dial-peer voice 201 pots destination-pattern 9T port 0/0/0 and I can see it pick up.
I was under the impression that an FXO card didn't have any clue about inside/outside etc, all it knew was that it was getting a signal to ring.
I have two internet connections coming to my server, both have an internet connection on them BUT i want to choose my default internet source from these two connections. So how do i achieve this on Server 2008 r2.
View 4 Replies View RelatedI just installed a new video card so this is probably the problem it says i might have disconnected a wire there or maybe its just a driver if its a wire.
View 1 Replies View RelatedI am in a community that has a wifi system and the club house is about 900ft awayWhat king of a receiver would I need to reach and receive that signal?
View 2 Replies View RelatedI have changed to Sky wireless router but my MV35-202 wont pick up the wireless signal.it was okay with virgin media.
View 1 Replies View RelatedIt wont even pick up from a direct ethernet. it is saying my firewall is blocking it and i have them shut off.
View 1 Replies View RelatedI have an ASA 5550 appliance that I am upgrading the code on. It is not being used for anything crazy advanced. It is simply an IPSEC tunnel and router. My main concern is stability, so obviously I would not be using a latest release. I want something that's tried and true. I am currently using asa831-k8.bin
View 16 Replies View RelatedIv been having a wierd time with my computer connecting to the internet lately. What we have is a setup of 2 routers:
1st - has my mums computer plugged into it and an xbox 360, and gets access to the internet through a modem.
2nd - is plugged into the first router, and it has my computer and my brothers connected.
Lately the 2nd router can't seem to pick up any internet connection and I'm not sure why. Usually the only way to fix this problem has usually been to reboot the modem and the 1st router, but since my mum often uses her computer its kind of awkward for me to keep rebooting it when she's using the internet just fine. As far as I'm aware the settings on both routers are still at their default values when we originally got them, so why I'm being disconnected 50% of the time is a bit of a nuisance.
I have an older Dell Desktop (Dimension E310) with Windows XP. I haven't turned it on in a year or so. Last time I used it I had a PCI Adapter for wireless and it worked fine.
Since then we've moved and are relying on a wireless router and I'm now trying to reconnect it, but it no longer has the little wireless icon. It has the Intel PROset for wired connections (from when I first bought it), and I ran the diagnostic on it, and everything passed except for the "link test." What do I do now?
My netbook have decided to stop pickingup the wifi in my house. My parents laptop picks it up and my iPod picks it up but for some reason it won't pick it up any more?
View 1 Replies View RelatedI have recently bought a second hand toshiba tecra laptop, i am trying to connect it to my netgear router. There is currently only one other laptop connect to this router and yet it will not let me connect to it. I have matched all the setting from the current laptop to the one i am trying to connect however it still will not even pick up a signal. I have phoned my network provider and they couldnt manage to find out the problem. When i try to search for wireless network connections there are none found even though the wifi button is on?
View 1 Replies View RelatedJust made a fresh computer, installed Win98 (have only 128 ram so no XP) I have a card I put in the computer from Linksys which allows for a desktop to have wireless internet. I installed the Linksys software. (first thing I've ever installed on this Computer after Windows) It doesn't pick up the wireless signal in the house (my laptop does just fine).. is there another program floating around somewhere?
View 2 Replies View Relatedi would like to pick up wireless internet using my linksys router is that possible?
View 1 Replies View RelatedI'm just building my gaming computer and have to start figuring out how to get internet on it. Considering I don't have a modem in my room, I would need a wireless card, right?
View 3 Replies View RelatedI've had a D-Link DGL-4300 for the past four years now (at least) and in the past month, the WiFi signal it sends out just isn't 'good'. What I mean is, the first time this happened in November, one day all the WiFi enabled devices in my home were connecting just fine. Then quite literally the next day, each device detected a signal in the area, yet they simply couldn't connect. I've refreshed each device (iPhone, laptops, consoles) yet they cannot actually connect to the network even though they pick up the signal.
At first I reset the router and that seemed to work, but only for a day or two before the problem started up again. So then I upgraded to the last (and latest) firmware D-Link has on their site and it looked like the problem was solved for good. But unfortunately, this has started again in the last couple of days. D-Link doesn't provide any tech support for my router because it was discontinued in 2009 so I'm stuck.
I just recieved new 7921 phones. I cannot get them to pick up a dhcp address
I keep getting DHCP "Timeout's" and " Configuring IP" . The ould 7921's and the new 7925's work just fine. I have tried removing and reconfiguring the WLAN and Interface on the Controllers. I even removed and reconfigured the DHCP scope in Infoblox.
My laptop will work on a wired connction just fine, however it fails to pick up wireless internet signals. It will either not find the signal, or not connect to it unless I have my laptop wired with an ethernet cable. My network adapter is a Broadcom 802.11n. I have tried updating the driver, and multiple different routers/connections.(Yes the adapter is enabled to search for connections, it just doesnt find them unless I have it wired)
View 1 Replies View RelatedI got high speed internet last week and have very little understanding of networking. I think I need either a Wireless Access Point, Bridge or Converter. What I'm trying to do: I currently have a Linksys E1000..I have two computers that access this point via built in adapters in the computers. In another room are my gaming consoles and television that I would like to hook up to the internet as well. Is there a wireless adapter that will pick up my Linksys E1000 signal and let me plug ethernet cords into it so my consoles and television can access the network?
View 2 Replies View RelatedI can connect to the internet just fine if I run my modem straight to my computer. If I try to run it through my router, however, I can't get a connection. The internet light on the router does not light up and shows no signs of connection. The DHCP renewal doesn't do anything, either. I have power cycled many, many times and reset the router to factory settings as well. I have tried cloning the mac address to match the computer and done all that I can (as far as my knowledge reaches). The tech support 'warranty' is also outdated, so there are no other options except for paying a ridiculous amount of money to talk to somebody.I just got a new modem yesterday and that is when it stopped working through the router. This problem occurs with two different routers (both of which worked previously) so I don't think anything is faulty.The modem is an ARRIS TM602G and the router is a Linksys WRT54G v.3
==================
MODEM (WITHOUT ROUTER)
==================
Host Name . . . . . . . . . . . . : Steez-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
I have a Netgear RangeMax Dual Band Wireless-N Router (WNDR3000). It works great in the house. What I would like to do is to be able to use my computer out by my pool. The furthest I can go with my laptop is sitting in a chair right outside my door step. If I walk away from the house, no cigar. Is there a way to extend my internet reception beyond my doorstop?
View 12 Replies View RelatedI can connect to the internet just fine if I run my modem straight to my computer. If I try to run it through my router, however, I can't get a connection. The internet light on the router does not light up and shows no signs of connection. The DHCP renewal doesn't do anything, either. I have tried multiple 'solutions' and am completely stumped.I have power cycled many, many times and reset the router to factory settings as well.I have tried cloning the mac address to match the computer and done all that I can (as far as my knowledge reaches). The tech support 'warranty' is also outdated, so there are no other options except for paying a ridiculous amount of money to talk to somebody.
View 1 Replies View Relatedi have lenova laptop. it does not pick up internet by wireless or through wired connection though the wireless is on?
View 3 Replies View RelatedI am building a BOM for a customer and I need to present cheaper options than 3500 or 3600 APs. I thought of these two models but I don't know what models of antennas to pick.1602 is a 3X3 MIMO with 3 antenna connectors. How many 2.4 GHz and how many 5.8 GHz antennas should I pick for each radio?2602 is a 3X4 MIMO with 4 antenna connectors. In this case I suppose there are 2 connectors per radio.
View 9 Replies View RelatedWe want to use cisco 3845 and pick up IPSec, with remote side. But I am afraid that cisco 3845 can't handle 155 Mbits over IPsec. We will buy AIM- VPN/ SSL3 card. Is this sufficient?
View 3 Replies View RelatedI am using a Negear Wireless USB adapter for the Dell Dimension 2400. The computer can see the wireless adapter in Device Manager; but it does not pick up any wireless signals.
There is a wireless switch to turn on/off for the laptop, but a desktop does not have such feature.
I bought the Telkom wi-fi router with A 3G dongle. If I plug the 3G dongle directly into a laptop it picks up immediately but when I plug it into the router it doesn't pick it up at all.
View 2 Replies View Related