Vista Blocking Program From Internet?
Jan 24, 2011
I have a program Eric's Movie Data Base. It needs to go to IMDB to update very often.On my XP there is no problem, it connects quickly every timeHowever I need to run it on my laptop with vista with a wireless connection.Using Vista the program EMDB runs ok but cannot connect to the IMDB site via the program.I have checked and firewall is off, and UAC also.As xp has no problem ( both are usin the same router) I can only assume Vista is blocking it.The request is reaching my modem, and the router is not using any port forwarding.Error message in log isFIREWALL replay check (1 of 24): Protocol: ICMP Src ip: 94.64.148.77 Dst ip: 58.166.25.196 Type: Destination Unreachable Code: Port UnreacheableI have contacted the developer who says the program is using the IE engine.
View 14 Replies
ADVERTISEMENT
May 27, 2012
I have a DLink DIR-615 rev. B2 firmware 2.25. A few days ago, I started using Comodo Unite for VPN access with friends and LAN gaming. However, just recently the program stopped working correctly. I have reset my configuration, tried multiple different settings, and nothing at all has remotely worked.
View 3 Replies
View Related
Mar 9, 2012
I have two windows.Windows XP and seven.My Windows XP cant connect to the internet.I was downloading a file With IE when my ISP experienced problems and my internet was shut down.Internet explorer was not responding and finally crashed my whole computer.from then on no programs like IE ,Google Chrome , Firefox or even VPN and Dial-up connections can get me connected to the internet. I installed windows seven and internet works fine there but MANY of my programs are on the xp and i'm more familiar with that windows. How to connect that to the internet? [code]
View 3 Replies
View Related
Dec 26, 2011
Router config and i just follow the instructions anyway i just bought this router cuz the old one failed and it was installed ok with internet connection and everything but when i open a program like bittorrent azureus the internet connection dies, it happens on my laptop and mac they both seem ok but when i open that program internet connection disappears
View 1 Replies
View Related
Feb 18, 2012
I am connected to my network wirelessly and I have Internet acces (according to the symbol at the bottom right) bu the Internet doesn't work. At the moment it keeps fluctuating between giving me interne and not I am using Skype to tell me if I have Internet ( when it's green I do when it's grey I don't) I have tried many things on forums like obtaining ip automatically or obtaining a fixed ip. I've tried renewing the ip and all this doesnt work.
View 4 Replies
View Related
Nov 8, 2011
NVIDIA is blocking my internet connecting on only one of my computers and it has become somewhat of an urgent situation. I need to know how to get rid of it immediately. I have no idea what NVIDIA is. I was using my computer and going on the internet without a problem and 3 hours later this issue came about.
View 2 Replies
View Related
Aug 1, 2011
Every time I turn on my PC I find I have lost internet access. I can fix this by going to Network Connections, disabling the connection, re-enabling the connection.But why does this happen? I notice the the following:1. When I look at the Network Connection it shows "Local Area Connection, Network 3, Unidentified network, Realtek PCIe....."2. When I re-enable the network AVG tells me the Firewall settings have changed - Directly Connected to Network has been set to Unidentified..... etc
View 2 Replies
View Related
Jan 12, 2012
I have a server subnet that for the most part needs to be able to access the internet for patches, updates, etc. My SysAd wants 2 of the servers to not have access. The server subnet is attached to a 3750 and connects to an ASA to reach the outside world. Would it be better to setup an ACL on the SVI of the server subnet or on the outbound direction of the outside interface on the ASA.
View 8 Replies
View Related
May 21, 2012
I am setting up a network for a friend with children. He has a BT homehub and wants to block their access between certain hours. However by using access control on BT it tells you that you have been blocked which is no good as he cannot feign ignorance and pretend he doesn't know what to do (as his kids will pester him to fix it). He therefore wants to block their access more discreetly (as if the internet was generally timing out or messing up instead of actually displaying they have access control).Is there a way to block an individual's access on the router without blocking everybody either on a timer or manually done each time (thus if there isn't a way of automating it he can at least do this manually each time).
View 3 Replies
View Related
Feb 20, 2012
Small business with 4 computers networked together and sharing coommon software programs and files. Need to block one of the computers access to the Internet whille allowing the other 3 access to the Internet. Is this possible/ If so How?
View 3 Replies
View Related
Nov 26, 2012
I am currently at university, using a Local Area Connection. I am aware that the university blocks torrenting which I am totally fine with though when I try to carry out a process such as posting a large entry on Livejournal.com or Dreamwidth.org, it tries to load for a couple seconds and then fails. When in Google Chrome, it says that it's "uploaded 100%" but then I receive "Error 7 (net::ERR_TIMED_OUT): The operation timed out.". When using Internet Explorer, it either doesn't load at all or I get the standard "Internet Explorer cannot display the webpage". When I try to carry out a different process on dreamwidth and livejournal (editing my layout), Chrome tells me "Error 101 (net::ERR_CONNECTION_RESET): The connection was reset." These issues always happen no matter when I try them.
View 2 Replies
View Related
Aug 6, 2012
Im using d-link 855 router to block internet to certain machines, using access control within dlink and then in putting the ip for the right machines. But it seems the machines keep changing the IP adresses everything they boot thus getting internet access the next day.
View 14 Replies
View Related
Sep 7, 2012
How to block Internet Connection during specific time.for example i want to block everyday between 8am to 12nn, then 1pm to 5pm.what are the options and better to achieve this kind of policy??
View 6 Replies
View Related
Sep 26, 2012
I bought a Dell V525w printer. Once I set it up, my computers can no longer access the internet! I have looked everywhere and cannot find an answer. The only way I can make the internet work again is to power down the printer, and reset the router. But, as soon as I turn the printer on, the internet conenction is lost again. This is very frustrating. I need to know how to fix this as soon as possible.I have a Netgear WNDR3700v3 wireless router. My computer is an Alienware X51.
View 1 Replies
View Related
Sep 15, 2011
I am having some trouble with the antivirus software.I had AVG antivirus installed but I thought it was causing some problems.So I unistalled it and downloaded a trial version of Bitdefender.Got it installed and found out I can't browse the web via Firefox. So I was trying to go through all the settings in Bitdef. but no luck.Uninstalled BD, rebooted the comp, still no internet. I did clean the registry and spyware as well.But the weird bit is that somehow I can browse the internet using old IE8 (64bit only. 32bit is not working?).I was also trying to re-install AVG but it could not complete as the connection with their server was blocked.It seems like something is blocking everything apart from 64bit ver. of IE8.
View 6 Replies
View Related
Nov 16, 2012
Belkin N450 Router. I want to restrict Internet access completely but allow LAN access to a shared drive for a particular computer on my wireless network. I have gone into the web based set up page and under access controls have enabled and added this computer to the list. I have blocked http, https, ftp and nntp. I don't know if this is enough. The reason I am asking is that I am in Iraq right now and I want to allow my fellow team members access to the wireless for using viber on their iphones but one cat even though he has hardwired internet wants to continuously suck off my wireless for his computer to download stuff since I paid for faster internet. I am trying to do this quietly and still allow him access to the shared drives on the LAN. Sooooo If I block him just outright will he still have access to the drives or do I need to pick and choose like I did above and if I need to pick and choose did I miss anything other then pop3 email and imap?
View 2 Replies
View Related
Aug 8, 2011
After updating the firmware of my WRVS4400N from V 2.0.1.3 to 2.0.2.1 all traffic was blocked for all machines, even some not included in the list of PCs. As the log was showing that all traffic was blocked by access policies, I disabled the only rule I had (blocking access to some sites to some MAC address list) and everything worked fine.I tried creating a new, simpler rule but after activation it blocked again all traffic for all the LAN.After many trials, I decided to roll back to the previous V2.0.1.3 which solved this problem.
View 1 Replies
View Related
Dec 28, 2012
I wonder if I can have a RV042 VPN Tunnel to a RV082, and in the RV082 block all traffic to the internet that comes form the PCs that are behind the RV042.
Remote PC -> RV042 -> VPN -> RV082 -> RV082 Firewall (block internet traffice, allow intranet traffic)
View 3 Replies
View Related
Jan 30, 2011
Just installed Vista and cannot seem to get the wireless card up. It keeps saying local only and when I diagnose and repair it says Cannot communicate with primary DNS server(192.168.2.1) When I run Ipconfig /all this is what I get:
Code:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:UsersNichelle>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : SCUP-PC
[code]....
View 1 Replies
View Related
Aug 29, 2011
I have a vista laptop connected to internet and a desktop running window XP. I want to make the laptop share its internet connection to the XP desktop but I haven't succeeded. The desktop has 3 Ethernet ports with one showing 3 computer connected together(same on the laptop except has 2 ports). I've tried connecting on all the ports but nothing happened. I googled a lot but the results I found always involved the XP having Internet but not the laptop. The computers cannnot even ping each other.
I did this before but both computer ran Windows XP, so I think it has to do with Vista.
View 2 Replies
View Related
Aug 19, 2012
I have a small network running in my language academy which is causing me some issues. We have a server running Win XP with two folders, one for the teachers which is password protected and the other for the students which doesn't require a password. Up until two days it has been working well. However now the server keeps disconnecting from the internet quite randomly which stops us from connecting to the shared folders.
I've noticed that a caution icon appears next to the ethernet icon in the task bar when this problems occurs on the server. I have tried to right click and choose the repair option but it tell me that it cannot resolve the ip address. In some cases rebooting the server resolves the issues but in many case it doesn't.
View 1 Replies
View Related
Sep 30, 2011
I have an RV110W running firmware version 1.0.1.6 and I am trying to figure out how to enable website blocking in the Internet Access Policy screen. The Add Row button is grayed out in that section, as are the associated checkboxes.
Is there something else one needs to do to enable this feature?
If I set a name etc. at the top, and click save, it tells me "You must at least set a website blocking or PCs rule," so it is not the case that one has to save some information before continuing!
View 10 Replies
View Related
Feb 10, 2011
i have a vista laptop and has connected to my old home network no problem i have now connected it to my new home router and connects to it fine but cannot get internet through it? other pcs can fine. i have looked over settings best i can and dont see why it should be able to recieve internet. it sends and recieves data to the router. and others get internet from it?
View 14 Replies
View Related
Feb 23, 2012
I've been having connecting my other desktop pc (with windows vista) to the internet. I am connecting it via ethernet/cat 5 and every time I continue to get a message that says unidentified network and it wont connect me to the net. From a previous post, I tryed going in and working with the tcp/ip stacks thru the command prompt and had no luck. So what I did was copy all the information from the command ipconfig.
View 16 Replies
View Related
Nov 17, 2011
I subscribe to Comcast internet service, at 10 mb/s. When connected wirelessly on my HP laptop, my internet is painfully slow, around 490 kb/s. However on my other laptop (a Sony VAIO) the internet speeds (wireless as well) are fine. Also, when I connect the HP by ethernet, the internet motors along at full speed. My specs are below[CODE]
View 5 Replies
View Related
Apr 2, 2012
So my Dad got a new Windows 7 computer, and gave me his old windows vista. When we got his computer all hooked up, and hooked up the windows Vista next to it. My mom wanted to use it to check her email. she didnt download anything, but after she turned it off, and i turned it back on, the computer would not detect any type of internet activity. i put in a new ethernet card, and it still would not work. The sound on the computer has also stopped working. i checked windows audio service, and it says its running, and there is no detected problem with any of the hardware.
View 3 Replies
View Related
Mar 21, 2012
error 1068: the dependency service or group failed to start. The router is Cisco Linksys E2000. No problems before and not with apple products going online, this hp is about 7 years old. Seemed to suddenly stop accessing internet.
View 3 Replies
View Related
May 28, 2012
I just reinstalled vista and put my disc with drivers in and may have chosen the wrong network adapter. Does windows automatically locate my adapter? My computer receipt lists "integrated 10/100 network card" and "intel 4965AGN wireless-N mini card".I can't access the Internet.When I ran the setup from the drivers disk, I chose intel 8255x-based PCI ethernet adapter (10/100). My other devices have issues too. There are 3 base system devices an Ethernet controller device and video controller that have the yellow exclamation points by them, as well as the network adapter.
View 14 Replies
View Related
Feb 22, 2011
my moms computer had vista on it an it crashed, so i installed xp pro and now the internet wont connect. in cmd prompt it says that the media is disconnected but everything is fine becuz both of my wireless laptops r connected fine...ive already tried to repair the local ac an it didnt do anything. also have tried reassigning the ip address and unplugging/ restarting the modem.
View 1 Replies
View Related
Sep 7, 2011
My girlfriend has just had Virgin Media installed in her house. She has a vista laptop which she is trying to connect wirelessly to the network. She can connect to the network (she says) but cannot use the internet.She has made sure she is typing in the security key correctly.I got her to try different encryption methods and she says these did not work.Tried resetting the network stack.Tried flushing DNS.Made sure Obtain IP and DNS automatically are checked.Tried setting up a wireless connection manually.There may be other things i've suggested but cant remember at the moment as well.Connecting via an ethernet cable works so its definitely a wireless problem. Her phone works using the wireless network ok, its just the laptop.
View 2 Replies
View Related
Apr 15, 2013
I cannot connect to Internet on a really Vista laptop, Here's pictures of my Ipconfig /all but I cannot copy and paste as I have no usb storage and cannot connect to the internet.
View 12 Replies
View Related
Apr 9, 2011
This is strange. I have a client who owns the DIR-601 router. It connects to a COX cable modem.
The wireless side works fine. I can access the internet using wireless connection with no problem. I can connect my Linux laptop both wired and wireless no problem.
However, and this is the puzzle, I cannot connect his Vista computer to the internet. It worked for a while then just stopped. From the Network and Sharing screen we can see a good connection to the router, but a big red X from the router to the internet.
I can ping the router with no problems, but I can't ping anything on the net either using a name (www....) or an ip address.
We changed from dhcp to static ip but that didn't work either. Changed the DNS to the ip address of the COX DNS just in case that was the problem. Still the same.
I have had COX over to check everything out and everything is fine on their side.
I have Googled all over the place and not found anything that's useful. I did find one post about a 625 that said to change the WAN speed from auto to 10 or 100, but from what I see the 601 doesn't have this capability.
View 2 Replies
View Related
Aug 18, 2011
My company has a peer to peer network of 10 personal computers without a server. Operating systems from Windows XP to Vista. I've recently installed a Cisco RV120W Wireless-N VPN Firewall. It's configured in DHCP Server Mode with printers/copiers that have static IPs below the DHCP range.
I'm having a problem with certain stations being used for personal networking, shopping, etc. during business hours. Consequently I would like to limit internet access on these stations. However, some internet access is required because of online database software that's an integral part of our business. I've been reading in the Administration Guide about URL Blocking. Would it be possible to give static IPs to certain stations and then limit their internet access to 1 or 2 specific websites?
FYI, I've read about the Trusted Domains and Blocked Keywords but cannot quite understand how to parley this into the solution I need.
View 1 Replies
View Related
