D-Link DIR-655 :: Lost CD Used To Download Program
Jul 4, 2011Lost CD used to download program and website is not facilitating in resetting password.....
View 2 RepliesLost CD used to download program and website is not facilitating in resetting password.....
View 2 Replieswhen doing the downloadupload test in UTorrent program it claims my port is not open (Default 17690). After I plugged my machine directly to the modem (suspect of port forwarding not working), after removing the antivirus I have, and after adding to my firewall inbounds rule regarding to that port, I still fail on the test.
View 1 Replies View RelatedYesterday after downloading something my internet disconnected from my desktop. However, the internet works fine on any other computer in the house. I'm assuming it's some sort of virus or something...I ran McAfee and it found nothing. When I tried connecting yesterday, it gave me all kinds of different reasons why it wasn't connecting when I diagnosed it. Now however, when I try to connect to it, it says the network key is incorrect, which it isn't.
View 1 Replies View RelatedInternet connection was lost after a recent program download that some had flagged with suspcious nature. A static IP address had been established through a Netgear (WNDR3300) router with an antiquated Netopia modem. Static address/Defaut gateway has always began as: 192.168..... After connection loss, reset (or so I think) IPv4 properties back to: Obtain IP address automatically and have received an IP address as: 169.254.172.83. Also have not been able to access router or modem settings/configurations page(s).
View 1 Replies View RelatedI have lost my installation disk for my WRT54G Version 8. Where I can download the drivers and installation.
View 9 Replies View RelatedI bought the wap54g access point.unfortunately i have lost the installation cd.is there a way to download the drivers of this device?
View 4 Replies View Relatedok my laptop dell XPS got virus and crashed...i cleaned it up and re installed window 7.Now my wireless 825 program is gone...i tried to install CD dlink 825 and it kept say retry.
View 1 Replies View RelatedIf i run the software CD and activate the cam by "setup your cloud camera" it works and i can see the camera but i can only run it per local router command 192.168.... and there i only have the 320x240 solution. Important info: I only want to run the camera in my local network, i wont use the mydlink option,But if i install the D-ViewCam software the screen remains black and the program wont find my camera. I have already had a phone call with the d-link software
View 1 Replies View RelatedRegion : Italy
Model : TD-W8968
Hardware Version : V1
I have a problem with my new td-w8968 router.The problem is that i can't use the reconnect function in the program jdownloader.The script is created with jd but it doesn't work!!!
I have a DLink DIR-615 rev. B2 firmware 2.25. A few days ago, I started using Comodo Unite for VPN access with friends and LAN gaming. However, just recently the program stopped working correctly. I have reset my configuration, tried multiple different settings, and nothing at all has remotely worked.
View 3 Replies View RelatedThe last time I let someone remotely access my computer it crashed. I lost the cd from the purchase of DIR-615. Tried to install from website but it can not detect the router to configure it. What to do? Buy another router that is not utilizing India companies for customer support
View 1 Replies View RelatedIs there any place I can download it so I can use my wi-fi again withot buying the installation CD?
View 2 Replies View RelatedYesterday we had a very brief power outage and until then everything worked fine. Small business that runs modem - router - switch. Since the power outage I can only get internet if I run straight into the modem. As soon as I run from the modem to any (tried 3 different ones) router I lose internet. I get a wireless signal on my router. I've reset the router to default settings. I've plugged in another router to the modem to check and I don't get anything from that router either (which was not plugged in during the power outage).
View 1 Replies View RelatedI've got a bit of a weird situation here as soon as I switch on my desktop pc my wireless connection is lost. This is only the desktop pc, I aso have a HTPC on wire, this one doesn't have any problems. If my wireless fails, my wired clients can still go on the internet. (see for detail the drawing at the bottom of this post).
The other weird thing is as soon as I set my wireless to WPA-TKIP there are no problems, but my wireless is set to WPA-AES due to the wireless N standard.
I also noticed as soon as my wireless drops out the router starts changing channels.
Part of my network is DHCP (in the range of 192.168.0.100 - 192.168.0.199) the other part has fixed adresses (192.168.0.251, 192.168.0.253, 192.168.0.254)
What i've tried thusfar
- other firmware
- replaced cables
- rebooting/restarting router
- setting up from factory defaults
I got a D-Link router not too long ago and I set it up in an odd way, the router password I gave it during the setup would not be accepted but the Network Security Key (the randomly generated alphaneumeric code) was accepted. I used it to connect all of my wifi devices.
The router password (which doesn't work), the "network name (SSID)", the network security type, and the network security key were all saved on my desktop. My computer has since suffered a critical crash and had to have it's hard drive erased. I still remember the password, the network name, and the security type. But the NSK (the thing I need to connect in place of a password) has been lost. It was this long random string of letters and numbers that I couldn't remember for the life of me.
I also remembered my Admin password, so I am able to log into http://192.168.0.1, but in here I only know how to change the regular password. I don't know how to access or change the NSK. change the security setting so that I can use the actual password instead of the NSK? Because of the crash I lost my iTunes libraries so I'm going to have to reset all my iOS devices, which are primarily what I use wifi on. If I reset them, they'll forget the wifi network and the assosiated NSK password, so I won't be able to use wifi at all.
Region : Sweden
Model : TL-MR3420
Hardware Version : V1
Firmware Version : TL-MR3420_V1_121123
ISP : Tre
I have owned the TL-MR3420 for about six months and never had any problems with it, 3G connection stable enough and wifi and LAN worked properly without any drops.About one week ago I started experiencing problems. Both wifi and LAN gets disabled and I need to pull the plug and do a hard reset to correct the issue. This only happens after some heavy use, many devices is connected to Wifi, streaming files over the WIfi and so on. A scenario may be the following; there are six devices back home using all using wifi. All of them are not connected at the same time, but four may be; usually three computers and one tablet. The HTPC may do some heavy videostreaming from another computer. When the streaming is over, some devices are shut down then I may lose the WIFI and LAN ability of the router.
I have tried connecting with cable after wifi were lost but no IP address where given to it and connection where refused. This means I have no possibility to access the log file in the router, and after reboot the log file is reset. Router settings is pretty much default.Is my device broken or is there any setting I may tweak with?I have updated to latest firmware and tried to change channel without success.
I bought a DIR-600 a couple of months ago. Days later started experiencing problems, connection would drop, and only way to restore connection was to reset the router.It has its password configured, a secure wireless connection also configured, and Wan Ping is disabled.Yesterday I called D-Link support, and they asked me to update firmware (from 2.03 to 2.05). I did, but problem still here.Today I realized that there is a log section, and when I entered this is what I found?
View 3 Replies View RelatedI had to reset and reboot. I entered the router ISP and went through the 4 step process then rebooted.
My question/problem is now the router is wide open. How do I find page where I can enable the security settings and lock down the router to the outside world?
I'm attempting to set up a DIR 825 and I have a damaged setup disc.Is this available as a download?
View 3 Replies View RelatedI am using InnoMedia MTA6328-1Be2S from Reliance and D-link DIR-600 for sharing internet connection. I have a strange problem here after using internet for sometime..I will not be able to use internet unless I shut down and restart both Innomedia and D-link.I tried changing configurations in D-link but with no luck. I lost the connection no matter I am using wireless or wired mode.I do not know how to login to InnoMedia MTA6328-1Be2S as well.
View 1 Replies View RelatedI'm using LMS 4.0, after I auto discovery device, I can see all of devices on my network but I cannot view the links connect between the ASR 9000 and Catalyst 6509. I've just checked cdp neighbor on these devices, I can see the full of neighbors.
I attach 2 file, with the visio topology and the topology view on LMS , and I'm 100% sure about the connections between these devices are used. I try to re-discovery many times but it not work correctly.
I dont know if there is a way to set up donwload limits per I.P. address on my home network.
View 3 Replies View Relatedit is possible to get an USB port connected, im hoping there is a trace drawn on the pcb from J1 and J2 from the Ralink BGA chip, making a simpler connection from the chip as reballing and making custom connections from that is quite bothersome if not impossible for a private person with regular tools.What i have is a DIR-600 B2.
View 7 Replies View RelatedWhere can I download firmware? I've been trying to get it through the official site and downloads page, but everytime I click download, then click 'open' there's absolutely nothing in the zip folder (0 bytes).Specifically, I'm looking for the D1 4.11 firmware. It's the one I've been using for about 2 years until needing to reset my router today. And as I forgot how to Hard Reset, I accidently reset everything deleting the firmware too, and I really need the D1 4.11 firmware back as it gave me no issues for 2 years!
View 14 Replies View RelatedI just bought this router. Unfortunately I'm losing close to 3mpbs !
When I was connected directly to the modem i had a little over 12.5 Mbps
Now I'm stuck at 9.5mbps and it won't go higher!
I read a bit over the forum. I tried turning off the QOS but it didn't change a thing.
Here a little extra information;
My internet provider is Cogeco
MY computer is wired
I tried 2 internet tester, both give me the exact same result
I need download LMS 4.0 eval trial. But i can't see any link down on url...
View 1 Replies View RelatedI bought my d-link 615 a few days ago and managed to connect it to my network and so on but I have a problem when it comes to my download speed. My usual speed is somewhere between 7.5-8 mb/s but when I have the router installed it's limited to 5 mb/s. Do you know why this might be happening?
View 14 Replies View RelatedI'm paying to get Download Speeds of 25Mbps from my cable provider.
If I plug my computer directly into my cable modem, I get 24.98 Mbps every time.
Using the same speed test, if I go through the DIR-655 I get rates from 2.92 to 10 Mbps.
I'm on Firmware 1.32NA. I'm ready to go out and buy a different brand Router.
I use a D-Link DWA-552 Xtreme Wireless-N PCI adapter on my Windows XP Home SP3 desktop computer that has been working flawlessly for months, until last night when it suddenly stopped being able to connect.I was just on the web last night doing what I normally do, and all of a sudden out of no where I lost internet connection and I couldn't get it back. I've tried resetting the router downstairs, I've tried restarting and shutting down the computer, and did three system restores (that all failed anyway), and none of these things are getting my connection back. Now also for some reason I can't even open up my network adapter's wireless network manager anymore because it closes itself not even a second after I boot it up.The modem and router downstairs look perfectly fine and all the other computers in the house, even the laptops, can all connect but mine, so something must be up with my network adapter.
View 14 Replies View RelatedRegion : UnitedKingdom
Model : TD-W8980
Hardware Version : V1
Firmware Version : 2013 firmware update
ISP : PlusNet
I changed the local port to 8080 for accessing the web logon page (i.e. 192.168.1.1) instead of its default port 80.
[code]....
Region : Germany
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : newest
ISP : CS
the router lost Wifi signal 5-10 times per day.Router and devices are in the same room. max 4 meters.
Region : Malaysia
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : TL-WDR4300_V1_121226(Unifi)
ISP : Unifi
Recently my router have been experiencing an issue with internet connectivity with Unifi.I will be able to connect to Unifi, the status is "Connected". However after some time though, like 5 - 10 mins, I will be no longer able to browser any pages or get disconnected from online games. Checking through ping tests, I can see that I am unable to get a response. Checking the router shows that I am still connected to Unifi. After a minute or so the connectivity is restored, but the issue happens again as before. This happens with both wireless and cable. Attached is a sample of the ping test result.
Things I have tried:
Updating the firmware to the latest version
Re-configuring the modem
Re-setting the Unif credentials in the router
Downgrading the firmware
Just bought a new DIR-655 Xtreme N Gigabit Router 3 days ago. Have 5MB fiber and consistently receive 4.7-5.0MB when connected directly to my laptop (windows XP, Dell wireless 1390 WLAN Mini-card, 802.11g only). I followed the CD instruction to set up the router and when connected wirelessly I consistently get 2.4 - 2.7 MB. When I connect a cable from the router to my laptop, I get the 4.7 - 5.0MB that I get when connected directly. I've tried a second laptop (Vista, 802.11g only) and when connected wirelessly I get 4.7-5.0 MB. A friend of mine who has a laptop (Windows 7, g/n) also connected at 4.7-5.0 MB.
View 1 Replies View Related