I was at my computer when the desktop appearance and taskbar changed. I immediately opened task manager to see what program might have caused this and didn't see anything out of the ordinary. Then about 2 minutes later my desktop changed back to what it normally is. I then went and disabled remote desktop connections... I think that someone may have accessed my pc remotely, buy I wasn't able to catch them at it. Is there any way to review incoming remote desktop connections historically?
Our office has three networked computers. 2 xp pro desktops and 1 xp media edition laptop. When I set up Access to work with all three I found somewhere that said that xp media has to have a password for that configuration. I'm hoping that was wrong. We backup from the Laptop (Media) to a desktop (XP) and it is currently requiring a passwordThe 2nd destop does not need a password to use shared folders on the main computer. The laptop (media) asks for a password the first time I try to connect to the main computer. I'd like to eliminate the need for a password. I have double checked the settings for gpedit.msc and the "limit local account use of blank passwords" is disabled
I have an existing VPN tunnel from my branch office to corporate.I want to allow my employees to establish a VPN connection to our local branch office where we have a local server, and not go through the corporate office.Can I set up a direct VPN connection to my router/ firewall at the branch office, even when there is a VPN tunnel already connected between my office and corporate?
My employees connects with a cisco ipsec vpn client to asa1,They can connect the network 192.168.1.0/24 from the employee location.(192.168.3.10 - 192.168.3.15) ip pool.Some people must also have a connection to the 192.168. 2.0/ 24, is it possible when they connect to asa1 with the ipsec vpnclient and that the 192.168.2.0/24 network also is avaible.
I have a couple WinXP Pros and Win7s connected to the same router wired and wirelessly. All of them have Remote Desktop enabled (via System settings) and have Windows Firewall exceptions setup. They all have AVG Anti Virus and no other firewalls installed. They all also have static ips assigned.Windows file sharing is working fine between all of them. VNC also works with no problems.But for some reason, I could not get Windows Remote Desktop to work between any of themAnother weird thing that may or may not be related is that they can't ping other computers on the same network.This leads me to believe that this might be a networking issue.I have a DLink router (can't remember model) with a Tomato Firmware.I do not have port forwarding setup for Remote Desktop because I think (although I may be wrong) that they are only used for connecting from the internet, which I don't need. I only want local connections right now.
Just recently we replaced our HQ Cisco-Pix with Cisco-ASA 5510. where we have many branches connecting to our HQ through site-to-site vpn. Since putting this new ASA5510 at HQ , while we are getting a Remote-Desktop session into our branches clients, and at the time when even a single TIMEOUT occurs on the vpn-link so the remote-desktop session gets completely lost. then we have to re-connect the session.This issue happens as i said above when a single timeout occurs on the vpn link. What is the issue with the ASA5510. because with pix we didn't have this issue, remote-desktops were never getting lost / reset with single timeout
i have with my Edimax router. I could not make any progress with Edimax personnel in Taipei.
If i connect my vista box directly w/o the router, i can see that port 21 (Filezilla) is open, using WhatsMyIP.org | Port Scanners/Sniffers
When I insert the Edimax br6215srg router, the port is in timeout as reported by aforementioned site (guess the port scanner gets no synack nor reset back to the syn it sends)
The router is set to "disable firewall" or to "enable firewall and DMZ enabled" with as client's ip the one that is configured in the router's dhcp table for the vista box. The NAT module is set to forward port 21 to the same ip. ipconfig confirms that i do get the ip programmed in the router's dhcp table.
I do not want to believe that this edimax box is unable to forward connections!
I recently moved house to a flat where I now have an adsl wireless router. Ever since I installed it its been major problems for me, my speeds are terrible takes ages to load a webpage and days to download anything. Also I have tried to stream to my apple tv through the use of airplay mirroring but this again doesn't work and an error code appears every time which I then looked up and it says its to do with my firewall blocking incoming connections. I have gone to my routers settings to try change this and it says to select the options by clicking the radio buttons however they do not exist on the page as you can see on the screenshot below.
I've been fighting with getting VPN connections working properly with my Dlink router. I set up virtual servers for PPTP and L2TP and could usually get the first attempt to work. Subsequent client connections would always fail.The logs display the following-Dropped GRE packet from 192.168.0.10 to 64.232.xxx.xxx as unable handle packet header. Blocked incoming GRE packet from 64.232.xxx.xxx to 76.105.xxx.xxx.What seemed to fix it was going to Firewall Settings and setting UDP Endpoint Filtering to Endpoint Independent and TCP Endpoint Filtering to Address Restricted.
How to configure my DIR-615 (Hardware Version E1 - Firmware Version 5.00NA) to:
1. Assign/Reserve IP address for 2 machines.
2. Route a web browser to a server on the first machine (port 80) as a default when another computer or smart-phone or device joins my open wireless network.
I am hoping to eliminate any changes to the IP address of the first two computers so that the server's IP address and port are static. I would also like anyone who joins the network to merely open their browser and be presented with the http interface from my server.
I am trying to make my computer support incoming VPN connections. I am using Windows 7 Home Premium on the computer I want to make the connection on.I am also using Verizon FioS internet (comes with default router/modem combo) to which I have the DIR-655 router connected. I am able to connect to both WiFi's fine and they work correctly.I think the Verizon router is set to block incoming VPN connections and I think this is why I cannot get anyone to be able to access my computer / internet via VPN. How I can perhaps forward ports and which settings I would need to specifically change in both routers admin settings so that I can get VPN connections to forward to my computer and be accepted.
I need to block 4000 nodes (Ultrasurf, TOR exit nodes) and I've written a script that will ssh and copy in these objects (prob 100 at a time) into an object group and then put a blanket deny. I don't see a flood of traffic (occassional hits every other day, etc) but I was wondering what the impact would be? Can the ASA handle an object group of that size plus an ACL with it? Any way to block incoming connections from TOR/Ultrasurf?
I have a Cisco 3745 that is my internet router, I have a domain that directs the web address to the WAN IP address...Can I set up my 3745 to forward incoming connections to my server?
Is it true that the FCC is investigating the Pogo game site because of poor security? Is Java the cause of this problem?I'm very leery of getting on the Pogo site because I've been told that my computer could get a virus and crash.
I'm new to IT, and have been put in charge of managing our servers hile my boss is on vacation.We currently have a Sonicwall Network Security Appliance that handles our Firewall/VPN and have web content filtering set in place.I have a user who belongs to 2 CFS policy groups that we have set up. I've double checked with Active Directory, and he is a member of both groups.
This person SHOULD have access to Job searches/ and Restaurants,but receives a "content blocked" message on his browser.It appears to me that the settings in Sonicwall are correct, as well with AD member groups.
I am trying to connect to a Security-enabled wireless netowork. I have the key. My problem is that I can't seem to figure out how to enter it. When I try to connect I open the "view available networks"window. I see the network name and it shows a strong signal (all 5 green bars).
We have a Cisco 2911 Router and have configured via BT Infinity Broadband for out going internet access etc. Are there any incoming restrictions ACL settings etc. that will stop us using for ISA VPN, Exchange connections, Intranet, Sharepoint etc. We have reserved 13 Static IP Addresses from the ISP.
I want to install Microsoft Security Essential on my PC, but I am not sure which download I need. One says amd64 and the other is x86. I am using windows xp 32bit.
I've been fighting with my E2500 since I got it back in June with lag, dropped connections, etc. It's a bit intermittent but can hang around for hours at a time when it kicks in. Restarts but the issue always comes back. Most noticeable while gaming online or on a VOIP program such as Team Speak. Generally when it happens If I'm monitoring my Team Speak connection the incoming packet loss shoots up between 20-30%, starting to drop out every other word or so. No out going packet loss. The connection drops are random between computers (I have one mac and one pc in the house) where one will be fine and the other wont, or when the whole system will stay connected and drop all transfer. In the case of this last one it's not my ISP's connection as any streaming happening between one computer and an Apple TV device will also cease. I've also swapped back to my old router (an older model linksys) and all problems have stopped. Fully rebooted and reconfigured the router about 3 or 4 times and am on the latest version of firmware (1.0.003). It was much worse on 1.0.002 but still very noticeable on 003. Also no difference with a different wireless adapter. I've tried the chat technical support but all they did was take 45 minutes to tell me how to reboot my router after telling them I already had.
I have windows xp home and the last few days a security installation has kept trying to install ie: "Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242) (update 1 of 1)..."
Actually all service from site to site is permitted, without restriction.I want to insert an ASA to block some internet traffic on main site.I try to configure my ASA5510.No problem for outgoing connection or to permit a single service on main site.But impossible to give access to all service/connection from all remote site to main site. [code]
On wireless (lenovo tabletx61) I cannot connect through the intranet - no problem connecting through internet. When I manage to connect through intranet connection is dropped quite often.No problem connecting via Ethernet cables.
I opened my iTunes program today and noticed a roommate's MP3 files were picked up on my network. I think the name of the program is Rocket Tube MP3. Anyway, I came on here because our computers use a Wi-Fi internet connection and I was wondering how much of my web activity (history, cookies, temporary files, etc) he could see from my laptop if his computer was a desktop downstairs. He's very tech-savvy (a former IT guy) and I don't want him snooping through my personal records.
We are a non-profit organization that is heavily reliant on interns that use their own laptops a lot here. My concern is they come in and connect to our wireless network with no supervision or anything else. I am worried they will introduce a virus, trojan, or something to our network. What the best way to keep them from introducing unwanted malware from a thumb drive, virus in email, or something to that effect shy of standing over them while they install and run an antivirus software?
I have problem with the Lan-to-Lan VPN tunnel.the VPN working fines since 9 months ago without any problems.Suddenly got the problem!,In last two days we faced problem the VPN down.in first time the problem in phase-2.. but after that in phase-1... in latest no data packet received to their side.
