Unable To Unblock Incoming Connections?
Nov 18, 2012
I recently moved house to a flat where I now have an adsl wireless router. Ever since I installed it its been major problems for me, my speeds are terrible takes ages to load a webpage and days to download anything. Also I have tried to stream to my apple tv through the use of airplay mirroring but this again doesn't work and an error code appears every time which I then looked up and it says its to do with my firewall blocking incoming connections. I have gone to my routers settings to try change this and it says to select the options by clicking the radio buttons however they do not exist on the page as you can see on the screenshot below.
View 1 Replies
ADVERTISEMENT
Nov 5, 2011
i have with my Edimax router. I could not make any progress with Edimax personnel in Taipei.
If i connect my vista box directly w/o the router, i can see that port 21 (Filezilla) is open, using WhatsMyIP.org | Port Scanners/Sniffers
When I insert the Edimax br6215srg router, the port is in timeout as reported by aforementioned site (guess the port scanner gets no synack nor reset back to the syn it sends)
The router is set to "disable firewall" or to "enable firewall and DMZ enabled" with as client's ip the one that is configured in the router's dhcp table for the vista box. The NAT module is set to forward port 21 to the same ip. ipconfig confirms that i do get the ip programmed in the router's dhcp table.
I do not want to believe that this edimax box is unable to forward connections!
View 19 Replies
View Related
Mar 16, 2011
which product has the capability to receive multiple incoming connections
View 1 Replies
View Related
Feb 1, 2011
I've been fighting with getting VPN connections working properly with my Dlink router. I set up virtual servers for PPTP and L2TP and could usually get the first attempt to work. Subsequent client connections would always fail.The logs display the following-Dropped GRE packet from 192.168.0.10 to 64.232.xxx.xxx as unable handle packet header. Blocked incoming GRE packet from 64.232.xxx.xxx to 76.105.xxx.xxx.What seemed to fix it was going to Firewall Settings and setting UDP Endpoint Filtering to Endpoint Independent and TCP Endpoint Filtering to Address Restricted.
View 1 Replies
View Related
Jan 3, 2013
How to configure my DIR-615 (Hardware Version E1 - Firmware Version 5.00NA) to:
1. Assign/Reserve IP address for 2 machines.
2. Route a web browser to a server on the first machine (port 80) as a default when another computer or smart-phone or device joins my open wireless network.
I am hoping to eliminate any changes to the IP address of the first two computers so that the server's IP address and port are static. I would also like anyone who joins the network to merely open their browser and be presented with the http interface from my server.
View 2 Replies
View Related
Jan 27, 2011
I am trying to make my computer support incoming VPN connections. I am using Windows 7 Home Premium on the computer I want to make the connection on.I am also using Verizon FioS internet (comes with default router/modem combo) to which I have the DIR-655 router connected. I am able to connect to both WiFi's fine and they work correctly.I think the Verizon router is set to block incoming VPN connections and I think this is why I cannot get anyone to be able to access my computer / internet via VPN. How I can perhaps forward ports and which settings I would need to specifically change in both routers admin settings so that I can get VPN connections to forward to my computer and be accepted.
View 1 Replies
View Related
Nov 29, 2012
I need to block 4000 nodes (Ultrasurf, TOR exit nodes) and I've written a script that will ssh and copy in these objects (prob 100 at a time) into an object group and then put a blanket deny. I don't see a flood of traffic (occassional hits every other day, etc) but I was wondering what the impact would be? Can the ASA handle an object group of that size plus an ACL with it? Any way to block incoming connections from TOR/Ultrasurf?
View 1 Replies
View Related
Mar 2, 2012
I have a Cisco 3745 that is my internet router, I have a domain that directs the web address to the WAN IP address...Can I set up my 3745 to forward incoming connections to my server?
View 3 Replies
View Related
Jan 15, 2011
In OS X 10.6.5, the following dialogue popped up:.Do you want the application "master" to accept incoming network connections?
View 3 Replies
View Related
Dec 19, 2011
We have a Cisco 2911 Router and have configured via BT Infinity Broadband for out going internet access etc. Are there any incoming restrictions ACL settings etc. that will stop us using for ISA VPN, Exchange connections, Intranet, Sharepoint etc. We have reserved 13 Static IP Addresses from the ISP.
View 1 Replies
View Related
Apr 20, 2013
I was at my computer when the desktop appearance and taskbar changed. I immediately opened task manager to see what program might have caused this and didn't see anything out of the ordinary. Then about 2 minutes later my desktop changed back to what it normally is. I then went and disabled remote desktop connections... I think that someone may have accessed my pc remotely, buy I wasn't able to catch them at it. Is there any way to review incoming remote desktop connections historically?
View 3 Replies
View Related
Dec 23, 2011
I've been fighting with my E2500 since I got it back in June with lag, dropped connections, etc. It's a bit intermittent but can hang around for hours at a time when it kicks in. Restarts but the issue always comes back. Most noticeable while gaming online or on a VOIP program such as Team Speak. Generally when it happens If I'm monitoring my Team Speak connection the incoming packet loss shoots up between 20-30%, starting to drop out every other word or so. No out going packet loss. The connection drops are random between computers (I have one mac and one pc in the house) where one will be fine and the other wont, or when the whole system will stay connected and drop all transfer. In the case of this last one it's not my ISP's connection as any streaming happening between one computer and an Apple TV device will also cease. I've also swapped back to my old router (an older model linksys) and all problems have stopped. Fully rebooted and reconfigured the router about 3 or 4 times and am on the latest version of firmware (1.0.003). It was much worse on 1.0.002 but still very noticeable on 003. Also no difference with a different wireless adapter. I've tried the chat technical support but all they did was take 45 minutes to tell me how to reboot my router after telling them I already had.
View 1 Replies
View Related
Dec 21, 2011
Im having trouble connecting to my router, everything was working fine till two weeks ago, I have a Vonage D-Link router model: VWR-VD and and have 3 computers, 2 desktops and 1 Laptop. one desktop is connected directly to the router and works fine, the laptop is connected wireless and it works fine too. the other desktop has a Realtek 8185 extensive 802.11 bg wireless devise VEN 10EC / DEV 8185. the computer was working fine till 2 weeks ago that I don't know what happened but now I'm able to see other connections but not my connection (my router). on the task bar when I click on the bars for my connection, my connection does not appear.I've tried the following: Reinstall the Driver reset IP I tried to change the homegroup, but I couldent due to the fact that I'm not connected?
View 8 Replies
View Related
Jan 31, 2012
I connected the router to the modem with an ethernet cable and the laptop to the router with another ethernet cable. A CD came with a router (Router: Asus RT-N10), so I put that into the laptop and followed the setup. The setup offered me to install something called Wireless Router Utilities, so I followed the setup and got to the point where it asked me to connect all cables etc. I did it already, but it kept telling me that the cables aren't connected. "Unable to detect the wired connections" I decided to skip that step and opened the browser, typed in the IP and got to the other setup thing. I typed in my ISP user/pass and I guess it sorta worked. I want to configure the router etc., to pass it and all. I go to the control panel, setup new connection, type the router PIN, I name the network, I put a passkey, and I click next.It says "Setting up [network name]" and after a minute it says "The network set up was unsuccessful". And that's it. No error notes, no nothing, just a button which allows me to retry.The OS is Windows 7 Home Basic. It's a new computer so almost nothing is installed. No anti-virus etc. Router: Asus RT-N10. Modem: Billion BiPAC 5200RC ADSL2.
View 12 Replies
View Related
Aug 7, 2011
My Hotmail id Blocked.
View 1 Replies
View Related
Nov 7, 2011
Someone told me that my computer is blocking port 132. I do a lot of instant messaging and because of this block I am unable to do any chatting.
View 2 Replies
View Related
Sep 4, 2012
How to unblock site on LAN
View 2 Replies
View Related
Mar 3, 2012
in my college,they have blocked facebook and even youtube by fortiguard.
View 1 Replies
View Related
Dec 15, 2011
I have a Toshiba Tablet PC that came with the configfree software. It worked fine for a while but then it started giving connectivity problems. I tryed to disable Configfree by all means possible to no avail. Then I decided to uninstall it successfully, but I still can't return the network connections control to windows. It seems like it is still under configfree. My guess is that some internal switch at the registry level is still saying that the wireless control is not windows.
View 1 Replies
View Related
Jun 13, 2011
We are having dialup 15 connections in router 3845 model IOS version 12.4 1A.We are unable to have a connection between dialup branches to headquarter. these are the command
aaa new-model
!
!
aaa authentication login telnet local
aaa authentication login ppp local
aaa authentication ppp ppp local
[code].....
View 7 Replies
View Related
Oct 6, 2011
I ve just finished setting up my first serial connections between two sites using Cisco 1800 routers. I can make connections from Site A to Site B using Windows XP clients, eg accessing exchange server 2007 running on Windows 2003x64, but the main problem is that when I try to configure Windows 7 clients to connect to exchange server on the other site, I can't make connections , no ping, no ssh , no http. What amuses me more is that I can connect to Windows 2008 servers using both Windows XP and 7.
View 5 Replies
View Related
Nov 17, 2011
i want to unblock facebook and youtube and such athor sites but fortiguard software used by admin blocked me
View 1 Replies
View Related
Sep 18, 2011
How can i unblock websites on my computer
View 1 Replies
View Related
Dec 19, 2011
For some reason I cannot access the internet. My hub shows internet access but my computer won't connect
View 3 Replies
View Related
Feb 23, 2012
how to Unblock netgear firewall
View 3 Replies
View Related
Apr 9, 2012
how do unblock facebook on this computer?
View 1 Replies
View Related
Jul 29, 2011
Suddenly my Dell Inspiron 8600 has stopped seeing any wireless connections in the range. I run XP Home SP3
View 1 Replies
View Related
Oct 2, 2011
I have just moved homes and I am unable to connect wirelessly to the internet through the network in my new house. The computer is connected to the network with excellent signal strength but access shows as local only and will not connect to the internet.
All other computers have been able to connect to the internet with no problems, and my computer will connect to other wifi connections, no problem.I can connect with a wire directly to the router, but no luck with wifi. I have also had this problem with one previous wifi network. I have tried many things, including taking the compter to a computer shop for them to look at and having another professional look at it, but so far no luck.
Tech Support Guy System Info Utility version 1.0.0.1 OS Version: Microsoft� Windows Vista� Home Premium , 32 bit Processor: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz, x64 Family 6 Model 15 Stepping 13 Processor Count: 2 RAM: 2037 Mb Graphics Card: Mobile Intel(R) 965 Express Chipset Family, 448 Mb Hard Drives: C: Total - 102720 MB, Free - 27457 MB; D: Total - 11750 MB, Free - 1681 MB; Motherboard: Hewlett-Packard, 30D9, 83.21, CND8173S5Q Antivirus: AVG Anti-Virus Free, Updated: Yes, On-Demand Scanner: Enabled
View 11 Replies
View Related
May 9, 2012
I currently use samsung R440 laptop with win 7. The problem is right now, I can't detect any wifi connections and bcause of that, I can't acces the internet. Before this, it works just fine but last week, my laptop can't detect any wifi connections. In the adapter setting, I found that there is no wireless connection icon . There is only local area connection. I don't how to repair this. The wireless lan on my keybord is on but still it can't detect anything.
View 1 Replies
View Related
Feb 25, 2013
We have a Cisco RV042 Router. Two ISP's and using dual wan setup. We are trying to connect to a pc on our network using rdp. The pc we are trying to connect to has been configured to listed for rdp on port 3390. I have tested it internally and connect via rdp thru said port.
I have setup a port forward rule on the router to forward port 3390 to the ip of the pc. I have setup protocol binding for port 3390 service on wan1.
View 4 Replies
View Related
Jan 9, 2011
I want to install a web disk. How do I unblock ports 2078 (SSL) or 2077?
View 1 Replies
View Related
Feb 25, 2013
The schools network has blocked facebook and stuff like that.Now ,i tried with UltraSurf and Tor,but it's still not working.How can i get passed the firewall?
View 4 Replies
View Related
Jul 18, 2011
I have recently acquired one of these routers. I thought, being a Cisco product, it would be the bee's knees. It is not. After finally getting the network set up - no mean feat, although I do not claim any expertise, but had to resort to some other network management software to finally get it all running - the router drops either the WAN connection or the wireless connection many times a day. The laptops often show as being connected to the network/router, but are unable to access either the internet, or the router via the browser. Re-booting the router is the fix, but, hey, I can achieve that sort of performance with any old $20 router - none of my old Net gear routers was this troublesome.
The permanent fix would seem to be a firmware upgrade, but guess what? The only options available under the "Administration" tab are time setting and switch settings - no firmware upgrade. The supplied firmware is 1.01.09(001) Apr 7 2010. Why these products are supplied, as new, without the latest firmware installed beats me, but there you go.
View 4 Replies
View Related
