Asus RT-N10 / Unable To Detect The Wired Connections
Jan 31, 2012
I connected the router to the modem with an ethernet cable and the laptop to the router with another ethernet cable. A CD came with a router (Router: Asus RT-N10), so I put that into the laptop and followed the setup. The setup offered me to install something called Wireless Router Utilities, so I followed the setup and got to the point where it asked me to connect all cables etc. I did it already, but it kept telling me that the cables aren't connected. "Unable to detect the wired connections" I decided to skip that step and opened the browser, typed in the IP and got to the other setup thing. I typed in my ISP user/pass and I guess it sorta worked. I want to configure the router etc., to pass it and all. I go to the control panel, setup new connection, type the router PIN, I name the network, I put a passkey, and I click next.It says "Setting up [network name]" and after a minute it says "The network set up was unsuccessful". And that's it. No error notes, no nothing, just a button which allows me to retry.The OS is Windows 7 Home Basic. It's a new computer so almost nothing is installed. No anti-virus etc. Router: Asus RT-N10. Modem: Billion BiPAC 5200RC ADSL2.
View 12 Replies
ADVERTISEMENT
May 9, 2012
I currently use samsung R440 laptop with win 7. The problem is right now, I can't detect any wifi connections and bcause of that, I can't acces the internet. Before this, it works just fine but last week, my laptop can't detect any wifi connections. In the adapter setting, I found that there is no wireless connection icon . There is only local area connection. I don't how to repair this. The wireless lan on my keybord is on but still it can't detect anything.
View 1 Replies
View Related
Apr 20, 2012
The other day i was on my mums laptop (ASUS X5DIJ) at her house all working fine the battery died so i plugged it in and started it up again however the charger cant have been fully connected and once back in windows the battery died again on the next boot i noticed windows said it had found the system CMOS/real time clock and had installed drivers for it. checked the driver details it says no driver files are required just like it should ever since then it connects to the network but will not connect to the internet at her house or at mine through wireless and ethernet cable although all other computers work fine windows troubleshooter says "Windows could not automatically detect this networks proxy settings"
I've tried
resetting routers and laptop = no change
netsh winsock reset and netsh int ipv4 reset = no change
ipconfig /flushdns = no change
ipconfig /registerdns = no change
[code]....
View 9 Replies
View Related
Jan 23, 2013
My ipod and my brothers ipod both detect and connect to our wireless network. Our PC connects to the network through a wired connection and is having no problems. I got a new laptop, have Windows 7 professional installed, and my computer will not detect any networks. I even tried unplugging the cable from the back of my PC and plugging it into my laptop, and it still does not detect a connection[CODE]
View 4 Replies
View Related
Sep 23, 2012
I purchased and set-up the EA4500 on Thursday. Friday my ISP (Charter) was out and worked on connection for over 2 hours due to slowness issues. Connected directly to modem I get normal ping times on whichever computer is connected. When I get the computer connected by the router (hard wired) I get very long ping responses up to 900ms. They are all over the place 30ms (I can live with that), up to the 900's. I contacted Linksys support last night, who had me update to the cloud firmware and change MT U to 1300, have not noticed a difference. I did end up doing a hard reset on the router last night after I lost tech support. We were disconnected with router rebooted, and I didn't have the patience to connect again last night.
It was so slow on my work computer, a pint to yahoo timed out. The computers connecting to router are
XP SP3 (mine)
Win 7 Home (IPV6 turned off)
Work laptop that uses VPN and VOIP
View 5 Replies
View Related
Sep 19, 2011
I have an e2000 wireless router and have several devices connected by ethernet cable including private data on an external hard drive. I am planning to allow a tenant in another building connect via an ethernet cable connected to my router. Can I limit that computer (tenant's computer) from accessing all other devices connected by ethernet cable to my router? I know can password protect wireless access and limit access to the internet that way -- but my question is specifically to connections by ethernet cable.
View 1 Replies
View Related
Oct 11, 2012
My E4200 router no longer accepts any WIRED connections. I can connect from the modem to the computer and everything works as expected. I can connect other computers wirelessly to the router. I cannot connect any laptops WIRED to the router. Nothing has changed on the systems to restrict internet access. There is something wrong with the router and the WIRED ports. I tried going through the troubleshooting on this site but it was of little to no assistance. The Cisco Connect utility doesn't appear to accomplish anything either. My guess is because I cannot connect to the WIRED ports on the router to connect to the internet to allow for whatever troubleshooting that needs to be done.
View 2 Replies
View Related
Feb 19, 2012
My computer can't seem to detect any connections, saying only 'Not connected - no connections are available'. But that's impossible, as my flatmates' laptops could detect the wireless modem we have in our flat, not to mention all the other random connections floating around. Luckily, if I connect my laptop to the modem with a wire, I can get internet, but when I unplug it, same problem persists
View 1 Replies
View Related
Jan 22, 2011
I was using my laptop on a different wireless connection than I usually use and it was working fine, and then the internet stopped working and it told me there were no internet connections available. The two people on laptops that were beside me had no trouble using the internet, though.So I brought it back home to connect to my home network and it is still giving me the same error. I used the other laptop at home to connect to the internet, which it did with no problem, to write this.
I also feel I should note that I have an HP Pavilion dv6308nr, which has a physical wireless switch on the front. When you turn it off, the light next to it turns red, and when you turn it on, the light turns blue. No matter how much off and on switching I do, it will not turn blue. It will not "click" anymore like it's supposed to, which makes me think it's something wrong hardware-wise. But I don't know if this is related, because it may have to actually be connected to the internet for the light to go from red to blue.
View 10 Replies
View Related
Mar 8, 2011
I have Dell Inspiron laptop with windows Vista Home edition with SP 2, Norton Antivirus 10.2. I was been using BSNL DNA A211-I wireless modem Since 1 yr. there used to be some router issues every 3 months and i used to re configure the router setting and re establish the wifi connectivity. but recently few days back I have uninstalled Norton antivirus and installed Kaspersky Internet security 2011( Trial version) even then things were fine for few days, i was able to connect. But suddenly 2 days back i connected my laptop along with the modem for one whole day without any activity . and on the next day when i try to reboot my system and connect to my internet i was not able to find the the wireless icon ITI in the available wireless connections list. The wireless connection was not detected by my laptop. my Wifi on my laptop is also on.I tried the below possible ways but could not get the connectivity1. re setting the router configurations2. switching the firewall off and tried to connectAll the 4 LED are glowing on the router, even when trying to connect PPPoE through LAN (with wire) it is connecting occasionally ie.. once for every 15 attempts. most of the time it is giving 815 errorI tried to the below commands from cmd prompt as wellnetsh int ip reset reset.lognetsh winsock reset catalogipconfig/flushdnsipconfig/registerdnsbut nothing happened.
View 1 Replies
View Related
Dec 18, 2011
From reading around I believe it may be because my integrated wireless card is turned off, how I turn this on?
View 1 Replies
View Related
Aug 10, 2011
I have an ASUS CG5270 desktop with windows 7. The desktop says that there are no connections available; however, my laptop is connected and showing all the networks in the neighborhood.
View 2 Replies
View Related
Nov 24, 2012
how to get my servers to run with 2gbs connections on the network. Is it all the same thing just different ways to do it? Some server side, some switch side, some both?In terms of my equipment, I have an Asus RT-N16 router [URL] D-Link DGS-1024D [URL] And (Not hooked up, but i have). Dell 2708 managed switch. [URL]This MOBO (790FX-GD70_[URL] With these NIC's Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC (NDIS 6.20) As i said before, id like to trunk/bridge/ w/e you want to call it, so i can get more bandwidth too and from the server.
View 7 Replies
View Related
May 30, 2012
I turned on my computer an tried to connect to the internet and it says that it cannot detect any internet connections. I don't understand why it says this because it is connected through the Ethernet.
View 19 Replies
View Related
Feb 28, 2013
Recently I've been trying to switch to a wired connection. The cord and the port works because I tested and the connection works fine with my laptop. But my desktop won't connect. The light where the cord plugs in lights up but my desktop does not detect it.
View 1 Replies
View Related
Aug 22, 2012
Just got the rt-n66u to add to my existing wired network. Can I just disable the DHCP on the 66U and set its IP address to something that's outside the range on my current router?
View 1 Replies
View Related
Dec 9, 2011
I have used the network for the last hour but after this reboot i cannot detect my network
View 10 Replies
View Related
Dec 9, 2012
I just had to put a new hard drive in my computer and I reinstalled windows xp. I cant get to Internet saying cant detect my modem
View 2 Replies
View Related
Jun 16, 2011
I installed the network adapter with no problem (using the CD included in the box) and it appears in my device manager and is working correctly. However, when I look look at the available networks I can only find BT Openzone (it's a pay as you go service, I'm using it now to try and fix this ), and some random BTHomeHub. I should be able to see a lot more, including my Virgin Media network, but I can't. It was the best 'Dongle'[?] in the store, so I'm guessing it's not an issue of proximity. I'm also certain that the network should be publicly visable.
OS: Windows XP PRO SP3
ISP: Virgin Media
USB Wireless adapter: Belkin Play dual-band N600 F7D4101
I have used Xirrus Wi-Fi Inspector and it does not detect any networks other than the two I've mentioned.
[code]....
View 6 Replies
View Related
Nov 15, 2012
I was using my computer this evening and suddenly it lost the connection to my wireless network and is now saying there aren't any wireless networks in range at all. I know this is wrong because my laptop (which I'm writing this on now), my PS3 and my phone are all able to detect not only my own network but other networks in the area.I've tried a couple of restarts on my PC and it briefly connects to the network and the internet (it connects to Steam and if I'm quick I can look at a couple of webpages). After a couple of minutes though, it loses the connection and decides there aren't any networks in range again.
View 4 Replies
View Related
Jan 2, 2012
we are trying to integrate ACE 4710 {Cisco ACE 4710 version A3(2.0) } installed on 4506-E with LMS 3.2. LMS is able to detect the 4506-E But LMS is unable to detect the ACE 4710. Tried to find the cisco document for supported devices in 3.2 it shows ACE 4710 is supported in DFM 3.1.1
[url]...
Also need to open tac for the same. but dont have details of LMS. How to open a SR with cisco (what details are required and how to find those details in LMS)
View 2 Replies
View Related
Feb 8, 2013
I can get my router into recovery mode, and after disabling all other network adapters and setting a static ip on the one I use to connect to my router, I was able to get into it using the Firmware Restoration Utility.But yet another problem is being faced now. When I try restoring the firmware, it goes up to 51%-54%, it varies, stays like that for like 10-15 seconds, and then throws this error message : "Failed to upload the firmwarecheck the connection between your computer and router."
View 3 Replies
View Related
Nov 4, 2011
Cannot connect to internet. Windows XP Professional 2002, 1GB of Ram, older computer, HP. Wiped out computer due to virus reinstalled only software I have, but internet is not working.
View 2 Replies
View Related
May 18, 2011
I have an Asus 1001 PG netbook. I am having problems with my home wifi network. When I turn on my laptop, I do not receive the signal for our home wifi network. However, I know that the network is working because other laptops at home are able to detect it. I don't think there is anything wrong with the laptop because I can still detect other wifi networks in our neighborhood. The problem only seems to be with our home wifi network. If I restart the computer, the problem is usually solved. This is not an efficient solution for me as I am used to turning my laptop off on hibernate and I don't like having to reopen all my documents.
View 1 Replies
View Related
Jul 10, 2012
I am using a USB Wireless Lan card to connect to the WiFi for over a year now. Never had any problems. Today suddenly i am unable to locate my WiFi router. This said I am able to see my neighbors router and am also able to connect to it. My router is working on other computers connected through WiFi. Now I have connected to the router through Ethernet and it is working. I would like to connect through WiFi only
ISP : Opennet
Tenda 11N Wireless USB Adapter
TP-Link Wireless Router
View 19 Replies
View Related
Feb 15, 2012
Today when I came home from school, I opened my computer like everyday. Suddenly I noticed that my Internet isn't working. It said I need to connect the Ethernet Cable. Well, my cable sometimes gets loose, so I tried to tighten it up a bit but that didn't work. I tried the cable with another computer and it works fine. I checked device manager and everything should be fine there.computer is running Windows 7 Professional.Drivers are up to date, and nothing changed in the computer since yesterday when it was still working. Could it be just that the Ethernet cable port suddenly broke down? I also tried another cable, and that didn't work either. I restored the system to previous saved point.
View 4 Replies
View Related
Sep 1, 2012
Computer unable to detect wireless adapter
View 1 Replies
View Related
Nov 29, 2011
I have a 6506 with SUP1 MSFC2, running IOS. [code] However, its not able to detect the switch module. [code]
View 6 Replies
View Related
Jun 22, 2011
There is a website I use, and when I was on it today I noticed that it was refreshing very slowly. Suddenly it stopped refreshing and gave me the "cannot connect" error screen. I waited all day and finally I thought to check via proxy. When I use a proxy, it works.
Here is what I have tried so far:
- used proxy (worked)
- pinged the site (worked)
- checked to make sure I'm not banned (I'm not)
- rebooted and started in safe mode with networking. Still could not access the site.
Computer Specs:
Asus N80Vm
Vista
View 1 Replies
View Related
Sep 30, 2012
My Asus Transforme pad won['t connect to my D-Link router, it just says "Obtaining IP address". It will connect to an an unsecured local router.
View 1 Replies
View Related
Jun 16, 2011
I just moved into a new apartment and I bought a usb wireless adapter so I could make use of the virgin media broadband. I've only ever used the internet on this computer via my ethernet connectionI installed the network adapter with no problem (using the CD included in the box) and it appears in my device manager and is working correctly. However, when I look look at the available networks I can only find BT Openzone (it's a pay as you go service, I'm using it now to try and fix this ), and some random BTHomeHub. I should be able to see a lot more, including my Virgin Media network, but I can't. It was the best 'Dongle'[?] in the store, so I'm guessing it's not an issue of proximity. I'm also certain that the network should be publicly visable. [CODE]
View 7 Replies
View Related
Feb 10, 2011
when i was surfing the internet like i normally did, the internet connection suddenly stop. i checked the connection and it said that it couldnt find the network. my wireless switch is on so i don't know what the problem is.
View 1 Replies
View Related
Sep 16, 2011
Unable to detect wireless network on sony vgn-nr32l (vista operating system).
View 1 Replies
View Related
