we are trying to integrate ACE 4710 {Cisco ACE 4710 version A3(2.0) } installed on 4506-E with LMS 3.2. LMS is able to detect the 4506-E But LMS is unable to detect the ACE 4710. Tried to find the cisco document for supported devices in 3.2 it shows ACE 4710 is supported in DFM 3.1.1
[url]...
Also need to open tac for the same. but dont have details of LMS. How to open a SR with cisco (what details are required and how to find those details in LMS)
I am currently experiencing a problem while trying to import multiple 4710 ACE Appliances into ANM. ANM version is 5.2 and ACE 4710 Appliances version is 5.1.2. The error message is the same for all Appliances (currently 14, more to be deployed this year, another 12 this year). The management class, policy-map and service policy are all in place.
I installed the network adapter with no problem (using the CD included in the box) and it appears in my device manager and is working correctly. However, when I look look at the available networks I can only find BT Openzone (it's a pay as you go service, I'm using it now to try and fix this ), and some random BTHomeHub. I should be able to see a lot more, including my Virgin Media network, but I can't. It was the best 'Dongle'[?] in the store, so I'm guessing it's not an issue of proximity. I'm also certain that the network should be publicly visable.
OS: Windows XP PRO SP3 ISP: Virgin Media USB Wireless adapter: Belkin Play dual-band N600 F7D4101 I have used Xirrus Wi-Fi Inspector and it does not detect any networks other than the two I've mentioned.
I was using my computer this evening and suddenly it lost the connection to my wireless network and is now saying there aren't any wireless networks in range at all. I know this is wrong because my laptop (which I'm writing this on now), my PS3 and my phone are all able to detect not only my own network but other networks in the area.I've tried a couple of restarts on my PC and it briefly connects to the network and the internet (it connects to Steam and if I'm quick I can look at a couple of webpages). After a couple of minutes though, it loses the connection and decides there aren't any networks in range again.
configure Cisco Ace 4710 ?Note :- Just a testing face I need to access my one server(192.168.1.11 : 80) through VIP :- 10.13.77.10 , I have only one Cisco Router 2800 and One L2 Cisco Switch 2960 and Cisco Ace 4710 . So I already configured 2 Different VLANS in Switch (Vlan 10 & Vlan 100) and by router I given the ip address of that Vlans with Inter Routing Vlan. My Connectivity is like this :-- Router Ethernet 0/0 --- 10.13.77.1/24 with vlan 10) & Router Ethernet 0/1 ---- 192.168.1.1/24 with vlan 100 ) connected with switch after that I configured ACE LB and connect the ACE interface with switch Like that ---- Connect to ACE Interface 2/3 vlan10 with switch vlan10(Ethernet port 2-12) and Connect to ACE Interface 3/3 vlan100 with switch vlan100(Ethernet port 13-24) .Testing to access server from Switch Vlan10 to Vlan 100 where my server is there.
Configuration :---
ACE> client side Vlan10 (10.13.77.4/24) , VIP :- 10.13.77.10, SM-- 255.255.255.255 ACE> server side Vlan100 (192.168.1.5/24), Web server -- 192.168.1.11 with 80 port ACE> Managment Vlan 1000 (172.16.6.5/24) , ip route 0.0.0.0 0.0.0.0 10.13.77.1
I already Configured in Routed mode but From Vlan10 ip subnet example like 10.13.77.12(Client or User PC) tried to access server 192.168.1.11 with VIP http://10.13.77.10 but not responding , if i access server with real IP then accessible (why boz there is inter vlan routing)?
We have 4710 ACE in our network and currently we are using software version A3 2.0.
Currently we are not able to access the ACE through web interface but Telnet is happening properly. Connection is establing while we are doing the telnet to ACE through port 80 and port 443. find the below dummy configuration.
resource-class SLB_STICKY limit-resource all minimum 0.00 maximum unlimited limit-resource sticky minimum 10.00 maximum equal-to-min
Cannot connect to internet. Windows XP Professional 2002, 1GB of Ram, older computer, HP. Wiped out computer due to virus reinstalled only software I have, but internet is not working.
I have an Asus 1001 PG netbook. I am having problems with my home wifi network. When I turn on my laptop, I do not receive the signal for our home wifi network. However, I know that the network is working because other laptops at home are able to detect it. I don't think there is anything wrong with the laptop because I can still detect other wifi networks in our neighborhood. The problem only seems to be with our home wifi network. If I restart the computer, the problem is usually solved. This is not an efficient solution for me as I am used to turning my laptop off on hibernate and I don't like having to reopen all my documents.
I connected the router to the modem with an ethernet cable and the laptop to the router with another ethernet cable. A CD came with a router (Router: Asus RT-N10), so I put that into the laptop and followed the setup. The setup offered me to install something called Wireless Router Utilities, so I followed the setup and got to the point where it asked me to connect all cables etc. I did it already, but it kept telling me that the cables aren't connected. "Unable to detect the wired connections" I decided to skip that step and opened the browser, typed in the IP and got to the other setup thing. I typed in my ISP user/pass and I guess it sorta worked. I want to configure the router etc., to pass it and all. I go to the control panel, setup new connection, type the router PIN, I name the network, I put a passkey, and I click next.It says "Setting up [network name]" and after a minute it says "The network set up was unsuccessful". And that's it. No error notes, no nothing, just a button which allows me to retry.The OS is Windows 7 Home Basic. It's a new computer so almost nothing is installed. No anti-virus etc. Router: Asus RT-N10. Modem: Billion BiPAC 5200RC ADSL2.
I am using a USB Wireless Lan card to connect to the WiFi for over a year now. Never had any problems. Today suddenly i am unable to locate my WiFi router. This said I am able to see my neighbors router and am also able to connect to it. My router is working on other computers connected through WiFi. Now I have connected to the router through Ethernet and it is working. I would like to connect through WiFi only
Today when I came home from school, I opened my computer like everyday. Suddenly I noticed that my Internet isn't working. It said I need to connect the Ethernet Cable. Well, my cable sometimes gets loose, so I tried to tighten it up a bit but that didn't work. I tried the cable with another computer and it works fine. I checked device manager and everything should be fine there.computer is running Windows 7 Professional.Drivers are up to date, and nothing changed in the computer since yesterday when it was still working. Could it be just that the Ethernet cable port suddenly broke down? I also tried another cable, and that didn't work either. I restored the system to previous saved point.
I just moved into a new apartment and I bought a usb wireless adapter so I could make use of the virgin media broadband. I've only ever used the internet on this computer via my ethernet connectionI installed the network adapter with no problem (using the CD included in the box) and it appears in my device manager and is working correctly. However, when I look look at the available networks I can only find BT Openzone (it's a pay as you go service, I'm using it now to try and fix this ), and some random BTHomeHub. I should be able to see a lot more, including my Virgin Media network, but I can't. It was the best 'Dongle'[?] in the store, so I'm guessing it's not an issue of proximity. I'm also certain that the network should be publicly visable. [CODE]
when i was surfing the internet like i normally did, the internet connection suddenly stop. i checked the connection and it said that it couldnt find the network. my wireless switch is on so i don't know what the problem is.
We have CUCM & lync server setup and its working fine if any one calling each other with DNS load balancing. But customer want ot use Cisco ACE 4710 instead of DNS LB.We have configured Cisco LB and deploy but when CUCM user calling to lync user call going to disconnect after 4 sec and also Lync users unable to make call to CUCM.And also LB deploye between share point but when users are trying to open web session that time web page going to show page cannot display.
I currently use samsung R440 laptop with win 7. The problem is right now, I can't detect any wifi connections and bcause of that, I can't acces the internet. Before this, it works just fine but last week, my laptop can't detect any wifi connections. In the adapter setting, I found that there is no wireless connection icon . There is only local area connection. I don't how to repair this. The wireless lan on my keybord is on but still it can't detect anything.
I have dell xps l501x with embedded 5620 mobile broadband mini card. Vz access manager says that device is disabled. How can I fix. Or in device bad and have to replace?
I have a Studio 1440 64-bit system that came with Vista installed. I upgraded to Windows 7 soon after. With both these versions the bluetooth was working fine. My computer got a virus and I had to re-install everything. Now my Bluetooth is unable to detect any bluetooth devices. I have the latest driver for the Dell Wireless Bluetoothe 365 module. When installing it says that it is looking for bluetooth devices but none are discoverable even though I have a Microsoft Bluetooth notebook 5000 mouse and a smartphone with bluetooth that are in discovery mode.I know the devices are discoverable because they are discovered on my wife's computer which is also a studio 1440.
I have used the WRT54GC (v2.0) router for a few years now, everything worked as smooth as butter, but a few days ago it just stopped detecting the internet connection. Everything works fine with the modem. After resetting the router, I tried to reinstall everything using the setup wizard but at the eleventh step, a pop-up message appears saying that it is "unable to detect the Internet connection" and, like I said previously, the modem works just fine. The username and password for the connection are correct (connection type: PPPoE).
I have configured ft on ace 4710 for failover, but the failover is not working. Each ace is acting as active, whereas the peer status is showing " FSM_PEER_STATE_DOWN".
I am attaching the configuartion file of both ace.
Note: Physically I have configure both ace device separately, but my confusion is do I need to configure only on primary ace and the same will be replicate on secondary ace automatically (like failover in ASA configuration) or it is ok.
i'm looking for a recommendation for a setup guide including ft i've had a quick look a wiki and i can get basics but i'm not sure about if i need to setup additional contexts etc when i'm the only one using the appliance?
I have an issue with a customer that wants to update a server behind the ACE. The problem is that when the application wants to update the server it does it with the name.Doing some research I found that you can rewrite the record DNS based on the static NAT you set up on the ACE. The feature is called DNS inspection. Is the same feature as the ASA (DNS doctoring).I apply it to the outside interface and it did not work.
I am trying to configure sticky on an ACE 4710 and don't understand what the netmask part of the sticky ip-netmask netmask address {source | destination | both } name command.
Some examples use 255.255.255.255 and others use 255.255.255.0 but I don't know what the significance is or what it does?
I am going to configure for both source IP and destination IP (both).
With the current (A5) ACE 4710 lic setup, does the "X gigabit per second appliance throughput" that is licensed affect: -
A) Only "appliance" i.e. load balancing traffic, any other normal routed traffic is not included in the limit
or
B) Is it an overall throughput limit on the interfaces i.e. includes all traffic not only load balancing traffic but also normal routed traffic crossing the appliance
Looking at a scenario where the lic size I need for HTTP load balanacing would be one size if A) but would need to be much larger is B) to accomodate out of hours routed backup traffic crossing the ACE 4710
