I am using a USB Wireless Lan card to connect to the WiFi for over a year now. Never had any problems. Today suddenly i am unable to locate my WiFi router. This said I am able to see my neighbors router and am also able to connect to it. My router is working on other computers connected through WiFi. Now I have connected to the router through Ethernet and it is working. I would like to connect through WiFi only
I have used the WRT54GC (v2.0) router for a few years now, everything worked as smooth as butter, but a few days ago it just stopped detecting the internet connection. Everything works fine with the modem. After resetting the router, I tried to reinstall everything using the setup wizard but at the eleventh step, a pop-up message appears saying that it is "unable to detect the Internet connection" and, like I said previously, the modem works just fine. The username and password for the connection are correct (connection type: PPPoE).
I installed the network adapter with no problem (using the CD included in the box) and it appears in my device manager and is working correctly. However, when I look look at the available networks I can only find BT Openzone (it's a pay as you go service, I'm using it now to try and fix this ), and some random BTHomeHub. I should be able to see a lot more, including my Virgin Media network, but I can't. It was the best 'Dongle'[?] in the store, so I'm guessing it's not an issue of proximity. I'm also certain that the network should be publicly visable.
OS: Windows XP PRO SP3 ISP: Virgin Media USB Wireless adapter: Belkin Play dual-band N600 F7D4101 I have used Xirrus Wi-Fi Inspector and it does not detect any networks other than the two I've mentioned.
I was using my computer this evening and suddenly it lost the connection to my wireless network and is now saying there aren't any wireless networks in range at all. I know this is wrong because my laptop (which I'm writing this on now), my PS3 and my phone are all able to detect not only my own network but other networks in the area.I've tried a couple of restarts on my PC and it briefly connects to the network and the internet (it connects to Steam and if I'm quick I can look at a couple of webpages). After a couple of minutes though, it loses the connection and decides there aren't any networks in range again.
Cannot connect to internet. Windows XP Professional 2002, 1GB of Ram, older computer, HP. Wiped out computer due to virus reinstalled only software I have, but internet is not working.
I just moved into a new apartment and I bought a usb wireless adapter so I could make use of the virgin media broadband. I've only ever used the internet on this computer via my ethernet connectionI installed the network adapter with no problem (using the CD included in the box) and it appears in my device manager and is working correctly. However, when I look look at the available networks I can only find BT Openzone (it's a pay as you go service, I'm using it now to try and fix this ), and some random BTHomeHub. I should be able to see a lot more, including my Virgin Media network, but I can't. It was the best 'Dongle'[?] in the store, so I'm guessing it's not an issue of proximity. I'm also certain that the network should be publicly visable. [CODE]
when i was surfing the internet like i normally did, the internet connection suddenly stop. i checked the connection and it said that it couldnt find the network. my wireless switch is on so i don't know what the problem is.
Region : India Model : TL-MR3220 Hardware Version : V1 Firmware Version : 3.14.2 Build 120817 Rel.55520n ISP : Tata Photon Whiz
I just bought the TP Link MR 3020 and tried connecting my Tata Photon Whiz USB (Huawei EC121) modem with it. The TP Link cannot identify the modem. It goes forever into identifying mode. I next tried a Huawei E173 with Reliance 3g sim in it but again no results. The TP Link goes into identifying mode forever. I have installed the latest firmware for the device but am not able to set it up.
Region : Egypt Model : TL-MR3420 Hardware Version : V1 Firmware Version : TL-MR3420_V1_120523 ISP : Etisalat Egypt
TL-MR3420 failed to detect " ZTE MF190S " Egypt Etisalat USB Dongle, and the file for the attached model can't be found on the 3G Modem Bin File Center.
Region : Malaysia Model : TL-MR3220 Hardware Version : Not Clear Firmware Version : 3.13.12 Build 120703 Rel.58323n ISP :
I'm using the TL-MR3220 hardware version 2.0. Firmware version 3.13.12 Build 120703 Rel.58323n. I'm using D-Link DWM-156 3.75G HSUPA USB Adapter.The problem I'm encountering is the router does not auto detect the 3G USB adapter when I power up the router. The router will detect the 3G adapter only when I plug out and plug in the 3G USB adapter. I used to have the same router but version 1.2. Version 1.2 does not have this problem.
Region : India Model : TL-MR3220 Hardware Version : V1 Firmware Version : TL-MR3220_V1_121123 ISP : Reliance Netconnect +
I have reliance ZTE AC2726 modem and i am trying to connect it with using the latest firmware version 121123. Router is able to detect the modem but when it tries to dial the connection is not established and reset the router after retrying 2-3 times. It was working perfectly fine earlier when i was on 120309 firmware version. So i tried downgrading my firmware version to 120309 and again it started working. I am not sure why the latest firmware version is not working with this device. Ideally the new firmware versions for a router should fix the existing issues and all the modems which were working earlier should work.
we are trying to integrate ACE 4710 {Cisco ACE 4710 version A3(2.0) } installed on 4506-E with LMS 3.2. LMS is able to detect the 4506-E But LMS is unable to detect the ACE 4710. Tried to find the cisco document for supported devices in 3.2 it shows ACE 4710 is supported in DFM 3.1.1
[url]...
Also need to open tac for the same. but dont have details of LMS. How to open a SR with cisco (what details are required and how to find those details in LMS)
I have an Asus 1001 PG netbook. I am having problems with my home wifi network. When I turn on my laptop, I do not receive the signal for our home wifi network. However, I know that the network is working because other laptops at home are able to detect it. I don't think there is anything wrong with the laptop because I can still detect other wifi networks in our neighborhood. The problem only seems to be with our home wifi network. If I restart the computer, the problem is usually solved. This is not an efficient solution for me as I am used to turning my laptop off on hibernate and I don't like having to reopen all my documents.
I connected the router to the modem with an ethernet cable and the laptop to the router with another ethernet cable. A CD came with a router (Router: Asus RT-N10), so I put that into the laptop and followed the setup. The setup offered me to install something called Wireless Router Utilities, so I followed the setup and got to the point where it asked me to connect all cables etc. I did it already, but it kept telling me that the cables aren't connected. "Unable to detect the wired connections" I decided to skip that step and opened the browser, typed in the IP and got to the other setup thing. I typed in my ISP user/pass and I guess it sorta worked. I want to configure the router etc., to pass it and all. I go to the control panel, setup new connection, type the router PIN, I name the network, I put a passkey, and I click next.It says "Setting up [network name]" and after a minute it says "The network set up was unsuccessful". And that's it. No error notes, no nothing, just a button which allows me to retry.The OS is Windows 7 Home Basic. It's a new computer so almost nothing is installed. No anti-virus etc. Router: Asus RT-N10. Modem: Billion BiPAC 5200RC ADSL2.
Today when I came home from school, I opened my computer like everyday. Suddenly I noticed that my Internet isn't working. It said I need to connect the Ethernet Cable. Well, my cable sometimes gets loose, so I tried to tighten it up a bit but that didn't work. I tried the cable with another computer and it works fine. I checked device manager and everything should be fine there.computer is running Windows 7 Professional.Drivers are up to date, and nothing changed in the computer since yesterday when it was still working. Could it be just that the Ethernet cable port suddenly broke down? I also tried another cable, and that didn't work either. I restored the system to previous saved point.
I currently use samsung R440 laptop with win 7. The problem is right now, I can't detect any wifi connections and bcause of that, I can't acces the internet. Before this, it works just fine but last week, my laptop can't detect any wifi connections. In the adapter setting, I found that there is no wireless connection icon . There is only local area connection. I don't how to repair this. The wireless lan on my keybord is on but still it can't detect anything.
I have dell xps l501x with embedded 5620 mobile broadband mini card. Vz access manager says that device is disabled. How can I fix. Or in device bad and have to replace?
I have a Studio 1440 64-bit system that came with Vista installed. I upgraded to Windows 7 soon after. With both these versions the bluetooth was working fine. My computer got a virus and I had to re-install everything. Now my Bluetooth is unable to detect any bluetooth devices. I have the latest driver for the Dell Wireless Bluetoothe 365 module. When installing it says that it is looking for bluetooth devices but none are discoverable even though I have a Microsoft Bluetooth notebook 5000 mouse and a smartphone with bluetooth that are in discovery mode.I know the devices are discoverable because they are discovered on my wife's computer which is also a studio 1440.
we just recently upgraded our router from an old model of d-link to tp link's tl-wr741nd. the wireless router was set up fine. but we noticed that we now experienced disconnection problems. our internet would just disconnect and then connect again every 5 minutes or so. but when i check the modem everything's fine. lights are on. even the lights on the modem are on. this problem never happened on our old router. is this possibly because of the N technology our new router has?
I am trying to setup a DIR-601 wireless router (Hardware Version: A1 Firmware Version : 1.00NA ) with my connection from Astound.I am able to connect to the internet from the cable modem (Motorola SURFboard SB5101) but I am unable to get it to work through the router. All the lights on the router look ok.When I look at the WAN status from the router setup page I see :
WAN Connection Type : DHCP Client Cable Status : Connected Network Status : Disconnected Connection Up Time : N/A
[code]....
* I noted that the router did not show me the correct time. Is that normal ?I have even copied my laptop's MAC address but it did not work. I restarted the modem and the router a number of times but to no avail.
Region : Others Model : TL-MR3020 Hardware Version : V1 Firmware Version : ISP :
After I configure the WAN setting on TL-MR3020, my laptop unable to connect to my TL-MR3020 anymore, the message says "windows was unable to connect to TP-LINK_POCKET_3020_B5F9AD".
I'm Using D-Link DIR 600 wireless router with my desktop CPU (Windows XP Professional SP1) using wired connection and Dell laptop (Windows 7 Ultimate) connected wirelessly. My problem is that I am able to access internet on bothsystems but they cannot see each other in network places. I am unable to sharefiles between the them. I have tried all the procedures mentioned in many forumsbut still not able to find a solution
I just bought a WRT54GL which is working perfectly. I needed it to extend my home network for my kids (I have not a very fast internet connection and my kids are eating all of it... With the WRT54GL I can choose how much they can have. So my own network has a netgear modem and a netgear wifi access point which is in this network : 192.168.0.x.
This network is not blocked in any way (just password protected). For my kids network, the WRT54GL gives addresses in this network : 192.168.1.x and is limited in speed. Everything is perfect, I have internet connection on both of my network, There is just the problem that I cannot access my printers, my servers, my computers.... that are on the 192.168.0.x network from 192.168.1.x. Is there a solution ? I already tried to force the WRT54GL to go to 192.168.0.x network but no more connection. Should I "bridge" the two networks ? How can I do it ?
