Can't Get To Internet Saying Unable To Detect Modem
Dec 9, 2012I just had to put a new hard drive in my computer and I reinstalled windows xp. I cant get to Internet saying cant detect my modem
View 2 Replies
ADVERTISEMENT
Cisco Routers :: RV110W Won't Detect Internet From Modem Interface
Jul 7, 2012I have an RV110W, there's internet access directly from my DSL modem, but when i connect my router it doesn't see the internet connection. I've changed the network cable and also confirmed the correct configuration in the router.
View 3 Replies View RelatedDesktop Cannot Detect Modem But Can Detect Others?
Sep 5, 2012i just bought a new desktop and my problem is as stated in the title. I cant detect my own modem but i can detect others.
View 1 Replies View RelatedLinksys Wireless Router :: Unable To Detect Internet Connection - WRT54GC
Jun 5, 2012I have used the WRT54GC (v2.0) router for a few years now, everything worked as smooth as butter, but a few days ago it just stopped detecting the internet connection. Everything works fine with the modem. After resetting the router, I tried to reinstall everything using the setup wizard but at the eleventh step, a pop-up message appears saying that it is "unable to detect the Internet connection" and, like I said previously, the modem works just fine. The username and password for the connection are correct (connection type: PPPoE).
View 4 Replies View RelatedWindows Xp Cannot Detect Modem
Apr 22, 2012windows xp cannot detect modem
View 1 Replies View RelatedDSL 2680 Modem - Unable To Connect With Internet?
Mar 24, 2012I have a problem with a talk talk dsl 2680modem or the connection? Everything worked fine until I did a facory reset on the pc (running xp),when I tried to install the talk talk internet from the cd, everything seemed fine with the wizard but no internet? the phone also has no dial tone? I am 99.9% sure it is not a problem in the area,I think its a setting problem with the setup.
View 1 Replies View RelatedWindows Xp Sp3 Won't Detect Cable Modem?
Oct 4, 2011When reinstalling windows corp. edition, windows installs, but the cable modem is not detected, and won't connect to internet.
View 3 Replies View RelatedHybrid Router Modem Unable To Connect To Internet
Dec 28, 2012I reset my Hybrid modem router's settings back to factory settings cause the disconnects were pissing me off.After a while, It disconnected. I tried reconnecting, but now it's only showing "No Internet access."
View 8 Replies View RelatedUnable To Connect To Internet Through Router Or Directly Modem
Feb 9, 2011So I recently just built a new pc for gaming, I can't seem to connect to the internet through my router or directly through my modem. I have connected directly on my laptop and it works and through router and it works.
View 1 Replies View RelatedTP-Link 3G/3.75G Router :: TL-MR3220 Cannot Detect Modem
Feb 13, 2013Region : India
Model : TL-MR3220
Hardware Version : V1
Firmware Version : 3.14.2 Build 120817 Rel.55520n
ISP : Tata Photon Whiz
I just bought the TP Link MR 3020 and tried connecting my Tata Photon Whiz USB (Huawei EC121) modem with it. The TP Link cannot identify the modem. It goes forever into identifying mode. I next tried a Huawei E173 with Reliance 3g sim in it but again no results. The TP Link goes into identifying mode forever. I have installed the latest firmware for the device but am not able to set it up.
Westell 2110 Wired DSL Modem - Unable To Connect To The Internet?
Jan 7, 2012I have a Westell 2110 wired DSL modem for Frontier (formerly Verizon). It's not a modem that has a web interface, so I can't log into it to change any settings. It also, to my knowledge, has no bridge mode (which is a term I know very little about). I had an old D-Link WBR2310 router, and since I knew the wireless and the phones ran on the same frequency, I bought a new Linksys e1200 router. Unfortunately, when I went through the setup of the router, while I know I have a solid internet connection from the modem (I'm hard wired in as I type), and while I can connect to the router, I am unable to connect to the internet. I took down my IP address, DNS servers, subnet mask, and default gateway, and set up the router to run under a Static IP, which it does phenomenally. Unfortunately, when the ISP (via direct line or my modem) changes the IP address after a few hours, my connection drops and I have to go reset up the connection via a hard wire, taking down the information, etc. Why is this the only way I can set up my connection? What could I be doing that I'm not to get it running DHCP correctly? It worked on my WBR 2310.
View 2 Replies View RelatedD-Link DIR-615 :: Unable To Recognize Internet Connection With SmartConnect Modem
May 31, 2011When installing the DIR-615, router installs, but error msg that there is no internet connection. SmartConnect is plugged into the WAN and I have tried the ethernet cable to the computer in spots 1 & 2. Good connection when SmartConnect modem is connected to computer directly.615's Internet indicator will turn green for a while, usually less than a minute or two, then flashes, then may actually cause the routers status indicator to flash off, then back on. Like a reset.
View 2 Replies View RelatedZyXEL Modem / Router Does Not Detect Ethernet Cables
Jul 28, 2012My ZyXEL modem/router does not detect my ethernet cables. it has one that runs to the main computer and i have a cable connected to my xbox. the light does not turn on when i try to use the internet for my xbox and the xbox does not detect ethernet. the other port works fine for the computer.
View 1 Replies View RelatedDLink N750 Router Fails To Detect Modem
Feb 13, 2013I've had a D-link N750 DB running smoothly for about a year now. Suddenly the other day, for no apparent reason, it dropped its connection to the modem and refuses to acknowledge it anymore. The router still broadcasts the network ESSID and accepts external connections.
First, the cable modem appears to work just fine, as I'm able to hard wire with a laptop and get consistent internet service. Second, when in the router settings, the ethernet connection status reads not detected, so it seems to me that the router hardware has no idea its got anything plugged into it.
I've tried the standard power cycling methods in various orders about a dozen times. I've replaced cables and done a hard reset of router settings. No dice.
TP-Link 3G/3.75G Router :: TL-MR3220 Not Detect Dlink Dwm-156 Usb Modem
Nov 22, 2012Region : Malaysia
Model : TL-MR3220
Hardware Version : V1
Firmware Version : 3.12.8 Build 110418 Rel.43954n
ISP : Celcom
my tl-mr3220 not detect my 3g usb modem dlink dwm-156.
TP-Link 3G/3.75G Router :: TL-MR3220 V2 No Auto Detect 3G Modem?
Dec 14, 2012Region : Malaysia
Model : TL-MR3220
Hardware Version : Not Clear
Firmware Version : 3.13.12 Build 120703 Rel.58323n
ISP :
I'm using the TL-MR3220 hardware version 2.0. Firmware version 3.13.12 Build 120703 Rel.58323n. I'm using D-Link DWM-156 3.75G HSUPA USB Adapter.The problem I'm encountering is the router does not auto detect the 3G USB adapter when I power up the router. The router will detect the 3G adapter only when I plug out and plug in the 3G USB adapter. I used to have the same router but version 1.2. Version 1.2 does not have this problem.
TP-Link 3G/3.75G Router :: TL MR3220 Is Able To Detect Modem But Not Connects
Aug 15, 2009Region : India
Model : TL-MR3220
Hardware Version : V1
Firmware Version : TL-MR3220_V1_121123
ISP : Reliance Netconnect +
I have reliance ZTE AC2726 modem and i am trying to connect it with using the latest firmware version 121123. Router is able to detect the modem but when it tries to dial the connection is not established and reset the router after retrying 2-3 times. It was working perfectly fine earlier when i was on 120309 firmware version. So i tried downgrading my firmware version to 120309 and again it started working. I am not sure why the latest firmware version is not working with this device. Ideally the new firmware versions for a router should fix the existing issues and all the modems which were working earlier should work.
Unable To Detect Own Wireless Network?
Dec 9, 2011I have used the network for the last hour but after this reboot i cannot detect my network
View 10 Replies View RelatedUnable To Detect My Wireless Network
Jun 16, 2011I installed the network adapter with no problem (using the CD included in the box) and it appears in my device manager and is working correctly. However, when I look look at the available networks I can only find BT Openzone (it's a pay as you go service, I'm using it now to try and fix this ), and some random BTHomeHub. I should be able to see a lot more, including my Virgin Media network, but I can't. It was the best 'Dongle'[?] in the store, so I'm guessing it's not an issue of proximity. I'm also certain that the network should be publicly visable.
OS: Windows XP PRO SP3
ISP: Virgin Media
USB Wireless adapter: Belkin Play dual-band N600 F7D4101
I have used Xirrus Wi-Fi Inspector and it does not detect any networks other than the two I've mentioned.
[code]....
PC Unable To Detect Wireless Network
Nov 15, 2012I was using my computer this evening and suddenly it lost the connection to my wireless network and is now saying there aren't any wireless networks in range at all. I know this is wrong because my laptop (which I'm writing this on now), my PS3 and my phone are all able to detect not only my own network but other networks in the area.I've tried a couple of restarts on my PC and it briefly connects to the network and the internet (it connects to Steam and if I'm quick I can look at a couple of webpages). After a couple of minutes though, it loses the connection and decides there aren't any networks in range again.
View 4 Replies View RelatedCisco :: Unable To Detect ACE 4710
Jan 2, 2012we are trying to integrate ACE 4710 {Cisco ACE 4710 version A3(2.0) } installed on 4506-E with LMS 3.2. LMS is able to detect the 4506-E But LMS is unable to detect the ACE 4710. Tried to find the cisco document for supported devices in 3.2 it shows ACE 4710 is supported in DFM 3.1.1
[url]...
Also need to open tac for the same. but dont have details of LMS. How to open a SR with cisco (what details are required and how to find those details in LMS)
Unable To Detect Supported Wireless Adapter?
Nov 4, 2011Cannot connect to internet. Windows XP Professional 2002, 1GB of Ram, older computer, HP. Wiped out computer due to virus reinstalled only software I have, but internet is not working.
View 2 Replies View RelatedUnable To Detect Wifi Network On Laptop
May 18, 2011I have an Asus 1001 PG netbook. I am having problems with my home wifi network. When I turn on my laptop, I do not receive the signal for our home wifi network. However, I know that the network is working because other laptops at home are able to detect it. I don't think there is anything wrong with the laptop because I can still detect other wifi networks in our neighborhood. The problem only seems to be with our home wifi network. If I restart the computer, the problem is usually solved. This is not an efficient solution for me as I am used to turning my laptop off on hibernate and I don't like having to reopen all my documents.
View 1 Replies View RelatedAsus RT-N10 / Unable To Detect The Wired Connections
Jan 31, 2012I connected the router to the modem with an ethernet cable and the laptop to the router with another ethernet cable. A CD came with a router (Router: Asus RT-N10), so I put that into the laptop and followed the setup. The setup offered me to install something called Wireless Router Utilities, so I followed the setup and got to the point where it asked me to connect all cables etc. I did it already, but it kept telling me that the cables aren't connected. "Unable to detect the wired connections" I decided to skip that step and opened the browser, typed in the IP and got to the other setup thing. I typed in my ISP user/pass and I guess it sorta worked. I want to configure the router etc., to pass it and all. I go to the control panel, setup new connection, type the router PIN, I name the network, I put a passkey, and I click next.It says "Setting up [network name]" and after a minute it says "The network set up was unsuccessful". And that's it. No error notes, no nothing, just a button which allows me to retry.The OS is Windows 7 Home Basic. It's a new computer so almost nothing is installed. No anti-virus etc. Router: Asus RT-N10. Modem: Billion BiPAC 5200RC ADSL2.
View 12 Replies View RelatedUnable To Detect TP-Link Wireless Router?
Jul 10, 2012I am using a USB Wireless Lan card to connect to the WiFi for over a year now. Never had any problems. Today suddenly i am unable to locate my WiFi router. This said I am able to see my neighbors router and am also able to connect to it. My router is working on other computers connected through WiFi. Now I have connected to the router through Ethernet and it is working. I would like to connect through WiFi only
ISP : Opennet
Tenda 11N Wireless USB Adapter
TP-Link Wireless Router
Windows 7 / Unable To Detect Ethernet Cable
Feb 15, 2012Today when I came home from school, I opened my computer like everyday. Suddenly I noticed that my Internet isn't working. It said I need to connect the Ethernet Cable. Well, my cable sometimes gets loose, so I tried to tighten it up a bit but that didn't work. I tried the cable with another computer and it works fine. I checked device manager and everything should be fine there.computer is running Windows 7 Professional.Drivers are up to date, and nothing changed in the computer since yesterday when it was still working. Could it be just that the Ethernet cable port suddenly broke down? I also tried another cable, and that didn't work either. I restored the system to previous saved point.
View 4 Replies View RelatedComputer Unable To Detect Wireless Adapter
Sep 1, 2012Computer unable to detect wireless adapter
View 1 Replies View RelatedCisco :: 6506 Unable To Detect Modules
Nov 29, 2011I have a 6506 with SUP1 MSFC2, running IOS. [code] However, its not able to detect the switch module. [code]
View 6 Replies View RelatedCabling / Cards :: Unable To Detect Wireless Network
Jun 16, 2011I just moved into a new apartment and I bought a usb wireless adapter so I could make use of the virgin media broadband. I've only ever used the internet on this computer via my ethernet connectionI installed the network adapter with no problem (using the CD included in the box) and it appears in my device manager and is working correctly. However, when I look look at the available networks I can only find BT Openzone (it's a pay as you go service, I'm using it now to try and fix this ), and some random BTHomeHub. I should be able to see a lot more, including my Virgin Media network, but I can't. It was the best 'Dongle'[?] in the store, so I'm guessing it's not an issue of proximity. I'm also certain that the network should be publicly visable. [CODE]
View 7 Replies View RelatedWindows Vista / Unable To Detect Wireless Network
Feb 10, 2011when i was surfing the internet like i normally did, the internet connection suddenly stop. i checked the connection and it said that it couldnt find the network. my wireless switch is on so i don't know what the problem is.
View 1 Replies View RelatedUnable To Detect Wireless Network On Sony VGN-NR32L
Sep 16, 2011Unable to detect wireless network on sony vgn-nr32l (vista operating system).
View 1 Replies View RelatedSamsung R440 Laptop Unable To Detect Any Wifi Connections?
May 9, 2012I currently use samsung R440 laptop with win 7. The problem is right now, I can't detect any wifi connections and bcause of that, I can't acces the internet. Before this, it works just fine but last week, my laptop can't detect any wifi connections. In the adapter setting, I found that there is no wireless connection icon . There is only local area connection. I don't how to repair this. The wireless lan on my keybord is on but still it can't detect anything.
View 1 Replies View RelatedWlan Detect Wifi Network But Unable To Connect In Windows 7
Aug 19, 2011My laptop detect the wifi network but when i try to connect with my wifi network it asks for security key then windows displays unble to connect.
View 1 Replies View Related