Unable To Restore Asus RT-N13U B1?
Feb 8, 2013
I can get my router into recovery mode, and after disabling all other network adapters and setting a static ip on the one I use to connect to my router, I was able to get into it using the Firmware Restoration Utility.But yet another problem is being faced now. When I try restoring the firmware, it goes up to 51%-54%, it varies, stays like that for like 10-15 seconds, and then throws this error message : "Failed to upload the firmwarecheck the connection between your computer and router."
View 3 Replies
ADVERTISEMENT
Jan 27, 2013
Yesterday, I flashed DD-WRT, latest beta version, to my router, an Asus RT-N13U B1. After flashing DD-WRT, I couldn't get the 3G USB modem to work with it, and thus, I decided to flash back the original firmware onto it. I needed to put it into restore mode, but it was just not going into the restore mode. Then I read somewhere that after installing DD-WRT, other people had the same problem. [URL] So I connected to my router via telnet, using PuTTY, and ran the "mtd erase linux" command without the quotes. Even now, it isn't going into restore mode.
View 11 Replies
View Related
Dec 10, 2012
I flashed my router to DD-WRT, but I could not access the web UI which is suppose to come on typing 192.168.1.1 in the web browser. . It used to come fine before but I reflashed to Asus Firmware but now I cannot access it. I have tried several times to flashing it to Asus Firmware and Back to DD-WRT, but it didn't work. When I flash to ASUS everytime my old settings are still the same. I tried assigning a static IP also.
View 1 Replies
View Related
Aug 17, 2012
Lost my internet connection to my Dell XPS 435t/9000 running Win7 (64) yesterday. Unable to restore. No know configuration changes other than the regular weekly window update. My service provider is Verizon FIOS and all there stuff checks out. My iMAC and Dell Laptop connect fine through the same devices (router/modem/switch).
The xps shows no hardware faults and all the wired connections are intact. Unable to ping router. Network Sharing interface shows good connections to switch and router by a bad connection between router and internet.
Ran WIN7 network troubleshooter and it just told me to contact ISP.Rebooted machine several times but no joy.
View 5 Replies
View Related
Jan 31, 2012
I connected the router to the modem with an ethernet cable and the laptop to the router with another ethernet cable. A CD came with a router (Router: Asus RT-N10), so I put that into the laptop and followed the setup. The setup offered me to install something called Wireless Router Utilities, so I followed the setup and got to the point where it asked me to connect all cables etc. I did it already, but it kept telling me that the cables aren't connected. "Unable to detect the wired connections" I decided to skip that step and opened the browser, typed in the IP and got to the other setup thing. I typed in my ISP user/pass and I guess it sorta worked. I want to configure the router etc., to pass it and all. I go to the control panel, setup new connection, type the router PIN, I name the network, I put a passkey, and I click next.It says "Setting up [network name]" and after a minute it says "The network set up was unsuccessful". And that's it. No error notes, no nothing, just a button which allows me to retry.The OS is Windows 7 Home Basic. It's a new computer so almost nothing is installed. No anti-virus etc. Router: Asus RT-N10. Modem: Billion BiPAC 5200RC ADSL2.
View 12 Replies
View Related
Jun 22, 2011
There is a website I use, and when I was on it today I noticed that it was refreshing very slowly. Suddenly it stopped refreshing and gave me the "cannot connect" error screen. I waited all day and finally I thought to check via proxy. When I use a proxy, it works.
Here is what I have tried so far:
- used proxy (worked)
- pinged the site (worked)
- checked to make sure I'm not banned (I'm not)
- rebooted and started in safe mode with networking. Still could not access the site.
Computer Specs:
Asus N80Vm
Vista
View 1 Replies
View Related
Sep 30, 2012
My Asus Transforme pad won['t connect to my D-Link router, it just says "Obtaining IP address". It will connect to an an unsecured local router.
View 1 Replies
View Related
Jul 31, 2011
I try to login to my router http://192.168.1.1/ I try and put in the user name and password that I think it is. Is it the user name and password you set up or one that's already there and if so where can I find it??
View 6 Replies
View Related
Apr 29, 2011
I've just tried to Wi Fi connect to the internet for the first time with my Asus Eee PC 1001PX notebook (Window 7 Starter). The signal strength for the Thomson TG585 V7 router is showing as excellent. I used Windows Diagnostics to try and sort the problem out; but it says that Troubleshooting was unable to automatically fix all of the issues found and that there is a problem with the wireless adapter or access point.
View 7 Replies
View Related
Feb 20, 2013
I have been using broadband in my laptop using asus wireless router/modem DSL-N10E for last 2 months but with Ethernet cable plugged in. I have never used its wifi function. I tried today but was unable to connect after entering security passwordWhen look for troubleshoot it says "There might be problem with the drivers for the wireless network connection adapters"
View 4 Replies
View Related
Feb 3, 2013
My laptop is unable to connect to my home wifi network after it had ip conflict last night. I tried network troubleshooting it and it always ask me to investigate the router. I tried to reset the modem a few times but my laptop still could not connect to it while my roommates and my phone could. Then I remove my wifi profile and attempt to connect back to the network. However, the same problem persist.My laptop model is Asus A43S and having Windows 7 Home Premium Service Pack 1.
View 4 Replies
View Related
May 29, 2012
I am unable to set router's (RT-N56U) IP adress to default one (192.168.1.1), or any other in subnet 1. It always popum message to me which says "IP adress 192.168.1.1 is not a valid adress". Also when I restart device it automaticaly sets its IP to 192.168.2.1. I have static IP which is translated to IP in subnet 1 so I need this working. The router is in "Wireless router mode (Default)"
View 1 Replies
View Related
Sep 5, 2011
I came home and was unable to wirelessly connect to my secure home network. I can connect to it secure and wired as well as unsecured and wireless, but not secured and wireless. I have done malware scans and checked for driver updates for both my netowrking card and the Linksys WRT54G router firmware...both are good. All of the other systems in the house can wirelessly connect to it while secured, so I've narrowed it down to clearly being a problem with my computer. I am using Vista Home Premium 64 bit on an ASUS G50VT.
View 10 Replies
View Related
Dec 29, 2011
I am unable to connect the Asus PCE-N13 (Windows 7 host) to the WRT610N V1.0 N network. The adapter does not see the N network on the LinkSys but there are other N networks in the list. I have updated the latest drivers. My PC Laptop, Macbook Pro, and Xbox 360 connects to the N network.
View 2 Replies
View Related
Jul 17, 2012
I have an ASUS Z77 Motherboard and when I install the AI Suite II which comes on the installation disc it blocks my internet connection. When I uninstall the software my connection is fine. I am using an Ethernet connection by the way. I think it is being blocked by the component called Network iControl. As soon as that component is uninstalled my Internet connection comes back. I want to have the software, but I also want to have my connection.
View 1 Replies
View Related
Oct 5, 2012
I recently moved into a larger 2 story house, and for the first few months I was using a Linksys E1000 I've had for about 2 years now. It's a fine single band router, but the people upstairs and the xbox/PS3 in the living room didnt have the strongest connection.
I shopped around and finally got a ASUS RT-N66U for a really good, strong dual band router that would supposedly give better range and performance than my old E1000.
Unfortunately, since I got it everyone is having issues they never had before, namely:Signal dropping all around the house and having to search for the network much slower performance than before the xbox/PS3 cant hold a stable connection even for a few minutes now, when before you could watch Netflix HD programs easily
I've upgraded the Firmware to 3.0.0.3.178 since I heard earlier firmwares had issues, but other than that and opening my ports for qTorrent it is relatively stock settings.
View 2 Replies
View Related
Aug 9, 2011
I think I've done a wrong move and cancel my company e-mail address.I'm not familiar with this , but is it pssible to restore.??..and if so be as clear as possible for each step to do cause I'm not a computer wiz in that stuff.
View 1 Replies
View Related
Jul 31, 2011
The problematic PC is AMD triple core, with ASUS M3N78 motherboard and xp professional. PC should connect to internet through the router, TP-Link TL WR340GD, along with 3 other PCs which are all working fine. Basically, the PC caught a virus and I performed system restore. After that, the PC was working fine, except that there was no internet connection. I tried to reset winsock from command promp, but that did not sort the connection problem.I noticed that the yellow light on the back of the tower, for the ethernet cable connection, is yellow when the cable is not plugged in, however, as soon as I plug the ethernet cable in, the light disappears. The same cable is working fine when connected to other PCs so it does not seem to be the cable problem. The information in Network Connections says Limited or no connectivity. Full messages when prompted says: "You might not be able to access the internet or some network resources. The problem occurred because the network did not assign a network address to the computer.To restart the connection and try to establish full connectivity, cliick Repair." and then, after clicking repair, it says:"Windows could not finish repairing the problem because the following action cannot be completed:Renewing your IP address.For assistance contact the person who manages your network."I also tried to release and renew IP address from command promp, but that did not work either.
View 19 Replies
View Related
Sep 7, 2011
I'm trying to restore my IP address because my boyfriend's at work and unfortunately not I've been following all the directions I can under this articlebut I get stuck at just the first step! When I hold the Windows and R buttons down and type in command the computer says it can't find that program and also when I open my network sharing center it won't let me right click on it anywhere to get to properties so that
View 2 Replies
View Related
Aug 9, 2012
I just reinstalled windows and am trying to restore my previous settings. I was wondering how to do that, specifically with the bookmarks.I originally saved my bookmarks with an export, and I have the saved file.I cannot seem to get my bookmarks back. I have tried all of the options.I am using the internet browser, google chrome.
View 2 Replies
View Related
Feb 18, 2012
How do i restore my password for D-link Model No.Dl-614+
View 1 Replies
View Related
Jan 3, 2012
I am trying to restore my pc to a previous date but the calendar that displays will not go back to December - it is stuck on January.
View 1 Replies
View Related
Jul 5, 2010
I'm trying to do a restore from one v5.1 box to another. The file is sent via ftp from the configured repository but when the file is sent I get an error saying failed to unpack.
My restore box is running an evaluation version at level 5.1.0.44.3
View 1 Replies
View Related
Apr 11, 2012
We have cisco works LMS 3.1 and the server have very problems, we need format the server and reinstall the Cisco Works, when I doin backup and restore of data LMS We lost the licenses? or when we restore the data in the server we have the same licenses? or get the new licenses to cisco?
View 5 Replies
View Related
Aug 29, 2011
If i reinialize(restore) the cmf database.do i need to reinialize all the databases.???
or if i reinialize the cmf database and do bulk import the devices is enough?
View 3 Replies
View Related
Sep 21, 2011
My wireless adapter isn't recognized on my computer now :( it was working perfectly before. My computer keeps saying there is no driver for my adapter?
View 1 Replies
View Related
Jun 12, 2011
my name is Nathan and I have ran into an issue with my LAN. I recently did a factory restore by pressing F11 at start up due to corrupted Windows files. Now that I have restored my computer, I get a "limited connectivity" to an "unidentified network" I tried all the Windows repair options, I powercycled my modem and my router and I unplugged and replugged my LAN cable.
View 9 Replies
View Related
Jan 27, 2013
I use a dongle from my ISP as my main internet connection source. I needed to do a full system restore because one of the windows system files got corrupted.After the restore, my internet connection was extremely slow. I restarted the computer and I got my normal fast speed but only for about 10 minutes and it is now very slow again (about 10 mins to load Google home page, for example).Internet speed was never an issue before the restore. Also I tried the dongle on my work laptop at home and it's fine.I'm using Windows XP. I've tried everything suggested at Slow Computer/Internet AFTER complete system restore but it is still slow.
View 5 Replies
View Related
Apr 11, 2011
i deleted my built in wireless connection by accident. how can i restore it
View 1 Replies
View Related
Sep 20, 2011
A I went over to a friend's house to fix some problems with his computer. He has a Windows XP Home Edition desktop. I used System Restore to fix some kinks with it, and now the computer has no Internet access, and I have no idea how to get it back. I tried reversing the System Restore and turning it off, but that's not working. They said that the connection was fine, but that the computer could not read the modem.
View 1 Replies
View Related
Aug 31, 2012
I went to a thread with the same name as this one and tried all of the things in it but it still won't work, although some programs now work a bunch of other ones still can't connect since the restore.
Code:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Mariama-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....
View 12 Replies
View Related
Nov 19, 2012
I wonder how i can restore my router to its defalt settings if my reset button is broken and the router has lock the mac of my pc. Can i connect the router to my pc and access it from it?
View 7 Replies
View Related
Apr 28, 2012
i installed fresh lms 4.2 on new machine and i amy trying to restore lms 4.1 backup via CMD.
View 1 Replies
View Related
