Stop Ip Conflicts When Using 2 Or More Laptops On Home Network?
Jun 5, 2012How do i stop ip conflicts when using 2 or more laptops on home network
View 1 Replies
ADVERTISEMENT
How To Stop IP Address Conflicts With Wireless Printer
Nov 25, 2012I use a wireless laptop and a wireless printer with no problems until my lodger's friend comes and connects to the network. That is when I lose printer connection and sometimes get the IP address conflict message. Obviously something to do with his laptop wireless connection
View 1 Replies View RelatedHome Network :: Bandwidth In Adhoc Connection Between 3 Laptops
Jul 20, 2011I have three laptops (running ubuntu with different kernel versions) with wireless adapter Intel Corporation PRO/Wireless 3945 ABG. Laptop A ----- Laptop B ----- Laptop CI created an adhoc connection in laptop A with: Essid: 'ad_hoc', IP address: 10.42.43.1, Subnet: 255.255.255.0, Gateway: 0.0.0.0, Now the laptops B and C can see the wireless connection 'ad_hoc' and I can connect to them after setting IP 10.42.43.1 and 10.42.43.2 respectively. So, I created the adhoc connection between 3 laptops. Now, I wanted to check the bandwidth between the different paths. The tool iperf was what I used for TCP bandwidth calculation. The bandwidth between A and B was around 4.5 Mbps , between A and C was around 4.0 Mbps but the bandwidth between B and C (B being server) was 677 kbps whereas C being server was 3.99. I don't understand how can the bandwidth drop so high when B was made the server. The system adapters are identical.
View 1 Replies View RelatedIP Conflicts On Wireless Network Using Windows 7?
Mar 23, 2011I'm on the road traveling and am having trouble with receiving an ip conflict error message shortly after connecting my windows 7 laptop to this particular hotels wireless network. Shortly after connecting to the correct access point is when the msg appears. I've checked my wireless adapters IPv4 TCPIP properties and ensured Use DHCP is enabled and that IPv6 is disabled. I've done a release and renew on the address after connecting as well (ipconfig /release and renew)to still no avail. Oddly enough, my internet connection works great in the morning at this hotel but has this problem at night time. Are there any known issues with 7 or such a thing as a Windows 7 "unfriendly" wireless router? I don't have this problem at home on my Linksys wireless router. Works fine.
View 1 Replies View RelatedCisco Wireless :: WRVS4400N Don't Have Any IP Conflicts On Network
Jan 11, 2011I am using a WRVS4400N as my primary router for a small office. I get the following message repeated over and over in my logs. This seems to happen for 2 or 3 days and then it will go away for about a week and then come back. What is causing this? The best I can tell I don't have any IP conflicts on the network and most of the time the network has very little traffic other than 2 or 3 computers surfing the web. [code]
View 19 Replies View RelatedHome Network :: How To Stop Internet Access Through Network Complete Internet Access
Jan 26, 2012i would like to know that how to stop internet access through network complete internet access
View 2 Replies View RelatedAuto Link Dell Laptops To Home Wifi?
Dec 16, 2012Just recently had Frontier WIFI router installed. How do we set up our Dell laptops to run off that WIFI without going through the process of selecting which signal we prefer process?
View 1 Replies View RelatedHp 620 / Dell D610 - Setup Wireless Ad-hoc Between Two Home Laptops?
Sep 2, 2011I just got a new Hp 620(windows 7 professional) and still got the Dell D610 (Xp service pack 2)i used before i intend to establish a home wireless ad-hoc connection between these two laptops.
View 5 Replies View RelatedCisco EPC-3825 / WAN Conflicts With LAN Subnet?
Nov 11, 2011LAN subnet conflicts with WAN subnet. My router is d-link 825 and my cable modem is Cisco EPC-3825. Op system is W7. Everything worked great with an older cable modem (Cisco 3000).
View 4 Replies View RelatedCisco WAN :: 2911 - No Conflicts With Multiple Telnet Sessions
Feb 27, 2011We have a new 2911 that needs to be configured, unfortunately it's at a remote site. I had installed the following config: [code]
Now, I do get a dhcp ip on the G0/0 interface and I can ping it from my remote network and the local router as well as the local lan. The hands and eye guy is able to telnet from the local lan but I am unable to telnet from either my remote lan or the local router.The only error I receive is "connection refused by remote host". All lines are clear so I have no conflicts with multiple telnet sessions.
Home Network :: Advanced Home Network Setup (3 Subnets) And Port Forwarding?
Feb 24, 2013I have a Time Warner Cable business class service with no static IP, with a wireless modem which is plugged to a CAT5 distribution panel. On the jacks (2 other rooms on the house) I have a Linksys E3000 and a Linksys Valet router for signal boost and gadgets usage (TV, cameras, etc).The main router (TWC) has it's own external IP which TWC assigns to me and internally distributes via DHCP the range 192.168.0.x. With that said:
- The E3000 has a 192.168.0.6 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The Valet has a 192.168.0.7 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The main router has the 192.168.0.1 as the gateway and web-interface
Whenever I connect something to the E3000, it is distributing the 192.168.1.x range and the valet 192.168.2.x range.That works perfectly for my home based business until I decided to use more stuff on the network such as a IP printer, IP cameras, etc.
- The IP cameras are connected to the E3000 due to signal strength and I have manually assigned them the 192.168.1.15 and 192.168.1.16 IPs and ports 9001 and 9002.
- The printer is connected to the E3000 and I have manually assigned the IP 192.168.1.30.
Issue 1: Port forwarding On the main router (TWC - UBEE) I have tried to setup a port forwarding by informing the Local IP as 192.168.0.6 (E3000 IP), Internal Port 0, Public Interface IP (0.0.0.0), Ext Start Port 9001, Ext End Port 9001, Protocol - Both, Enabled Yes. On the E3000 I did the same config (screen shot attached e3000.png).This is not working properly. I can't get into the camera.
Issue 2: Printer/ The printer is only accessible if I connect to the E3000 (because it is on the 192.168.1.x network)
Issue 3: How to configure all the devices on the same subnet? If I want everyone to be on the 192.168.0.x network, how to configure properly the E3000 and the Valet? I have tried to force them into the same network but it would not work properly. It would not get an IP from the UBEE router (main).
Add Two Laptops To Current Network?
Apr 21, 2011i have a wireless router on which my desktop with XP is connected to wirelessly. I want to add two laptops with windows 7 to the network what do I need to do?
View 1 Replies View RelatedLinksys Wireless Router :: Samsung BD-D5300 Blu-ray Causing IP Conflicts
Oct 18, 2011I just bought a Samsung BD-D5300 Blu-ray player that allows a bunch of networking options including wireless and wired. I was using the wired option when I came across some conflicts with my network using a Linksys WRT350N v1. The Samsung conflicted with the Linksys's DHCP server. The blu-ray player turns off automatically when inactive. It was causing conflicts with my iPad 2, MacBook Pro and Motorola Atrix android phone whenever it got assigned an IP address. When I reset the router and my cable modem, it wasn't assigned an address for awhile, which fixed things, but as soon as it got an address again, it was caused conflicts by being seen as a LAN by my router. When it wasn't receiving an address, it got the automatic private IP address of 169.x.x.x. When I removed the connection with my router, the conflicts disappeared and my computers were able to access my wifi again.
View 1 Replies View RelatedCisco AAA/Identity/Nac :: 7204 - Radius Auth For Login And VPN Conflicts
May 15, 2011Im trying to configure a 7204 for radius login authentication, although the router is also configured with radius for VPN access. How can I configure it for both using 2 different raidus servers? the login via radius is working fine on another router, although that one is not doing VPN access so there's no conflict.
My config:
aaa group server radius RADIUS_AUTH server x.x.3.11 auth-port 1645 acct-port 1646
aaa authentication login networkaccess group radius local
[Code]....
For some reason, this does not work. I cannot access the router and authenticate via x.x.3.11 radius server. I think there's a conflict between the VPN and the login authentication but im unsure how to resolve this.
Connect 2 Laptops From Wireless Network?
May 13, 2011i want to connect 2 laptops from wireless network.
View 2 Replies View RelatedCan't Get Wireless Network Unless Both HP And Toshiba Laptops Are On
Sep 12, 2011Have 2 laptops that use wireless internet. The Toshiba cannot make a connection to the internet (says it in not compatible), but if the HP laptop connects to the internet then the Toshiba will. Both are running windows 7.
View 2 Replies View RelatedLaptops Losing Connection On My Office Network?
May 17, 2011I have 2 older xp pro tough books that connect to my domain via a pair of versa vx 400 access points. automobile technicians use these computers to communicate with cars via a separate wireless card and WiFi device (SPX MVXI) that broadcasts a wireless signal.they always connect just fine to the network but sometimes they drop there connection and don't rejoin which screws up my scheduled tasks (nightly upload). They will reacquire the connection every time if i select it again manually in the windows wireless config.here is what I have done so far
1. set up exclusion range in DHCP distribution on my DC
2. set the laptops up with static IP's within the exclusion range.
3. configured the laptops to auto connect to the network even when its not broadcasting
4. set the access points on channel 7, and the devices on 1 and 11.
I have done a lot of research on this issue, a rep from versa told me that Intel proset wireless isn't very compatible with there product which i this is BS since it does the same with with the netgear WiFi PC cards.
Dell Mini - Laptops Cannot Connect Although Others On Network Can
Dec 1, 2012My wife has a little Dell Mini running Windows 7 Starter. It connects to the network but gets a message that it cannot connect to the internet. Other laptops on the network CAN connect. This issue is new, the laptop has been fine up until a few days ago.
Per a separate thread, I went to the command prompt to try to run the ipconfig all but it comes up as user/owner and I don't know how to get to admin mode. Also, the proxy option is unchecked.
D-Link DIR-615 :: Wireless Laptops Loose Network Connection?
Jun 30, 2011I have battling this issue since I bought this router, at least 2 years.
Using:
DIR-615
PC XP Wired
2 Acer laptops Vista wireless
All DHCP reserved
Security using wpa_psk
Not sure what other router info you need. All are connected to the internet, but can't see each other on the LAN. We can see each other from time to time. Sharing is allowed. Passwords are shared. I can power off the router and the network will be fine for about a day, then gone again. Workgroups are the same.
Home Network :: Need To Extend Reach Of Wifi Network At Home
Oct 20, 2011Here's the layout: Cable modem in the basement. Several devices in which I'd prefer a wired connection in the basement. Upstairs on the 1st and 2nd floor of the house are many devices in which wifi is fine or preferred.Here's the problem: As you might guess, wifi is weak upstairs and certainly on the patio and 2nd floor. I have an access point upstairs that I've experimented with but it is flaky.
View 1 Replies View RelatedHome Network :: Install A Wireless Network In Home Environment?
Nov 10, 2011How to install a wireless network in home environment?
View 6 Replies View RelatedHome Network :: Need Input On Network At Home Newly Wired
Jan 14, 2012I am a new student in networking, taking the CCNA courses, and now want to rewire my home. I currently have a cable modem and E2500 setup running my network. I want to get the modem and router out of my computer room and in the basement where the cable enters the house. I want to do this to clean up the computer room wiring a bit and to run line drops to different rooms in the house where the internet will be utilized.Currently there are two PC's, a laptop, a tablet, sometimes a phone, and an XBOX using the internet. I want to get my printer back up and running on the network but thats another story. Only one PC is currently hardwired. I would like to run two cables into the room with the PC and XBOX that are currently using wireless, at least two into the computer room for the PC and network printer, and one or two into the living room for the blue ray player and possibly an internet tv.
View 1 Replies View RelatedHome Network :: Can't Get D-Link DGL-4500 To Accept Home Network?
Sep 10, 2011I have a D-Link DGL-4500 router and my landlord recently ungraded our internet connection. However, now I get this error message when I try to hook it up to the ethernet hub,"The addressing of the Internet side learnt thru DHCP conflicts with the addressing selected for the LAN side. Internet communications will be disabled until you have changed the LAN side addressing to resolve the problem."
View 3 Replies View RelatedSweex LW150 / Get Connect To Another Wireless Network And Share To Laptops
Dec 25, 2011i have sweex lw150 and i want to get connect to another wireless network and share to my wireless laptops.
View 3 Replies View RelatedCabling / Cards :: Connect 4-6 Laptops In A Mesh Network Topology?
Feb 18, 2012I need to connect 4-6 laptops in a mesh network topology. What equipment do I need (switches, hubs cable etc..) and how should I create the connection?
View 1 Replies View RelatedChanged Password To Wireless Connection - Can't Do It In Laptops Network Settings
Jan 29, 2013I changed my password to my wireless connection and now I can't change it in my laptops network settings
View 7 Replies View RelatedHow To Stop Unknown Workgroup Users On Network
Feb 13, 2011How I can stop the unknown workgroup user on my network?
View 1 Replies View RelatedRouters / Switches :: Linksys WRT110 Laptops Won't Recognize Wireless Network
Jun 18, 2011I have a Linksys WRT110 wireless router that has never given me any problem. All of the sudden, after a storm blew through yesterday, none of the laptops in my house (PC running Vista and Mac) will recognize my wireless network. I have a desktop computer and BluRay player hardwired to the router and the internet works fine on them through the router.The problem is not that I can't connect or lose connection, the wireless network isn't showing up as existing anymore, like it has disappeared.
View 3 Replies View RelatedD-Link DCS Network Camera :: 2121 Motion Trigger Won't Stop
Feb 25, 2013I have 3 cameras. all had the problem that after a while motion detection would be triggered continuously for no reason at all. With 2 of them I managed to fix it with a firware update, but no luck with the 3rd one. I even tried several different firmware versions.) it starts to record continuously after abt 24-48 hrs & i have to reboot to get it to stop.
View 1 Replies View RelatedCisco Wireless :: 2504WLC - Stop Connecting Kindles By Network
Jun 16, 2013I have 2504 wlc, 1142n ap's and a windows radius server.Users have figured out that they can connect their kindles to the wireless by using there network login credentials. How can I stop this? Change authentication from user or computer to just computer?
View 5 Replies View RelatedHome Network :: Playing MPEG-2 File In Webpage From Home Server?
Dec 20, 2012I have setup a webserver on my home PC and I have forwarded port 80 on my router to the IP adress of the PC that is running the web server. The web server is working great; I can get to my web pages from outside of my home by going to http://MyIpAddress/Anyway, the problem is with the Windows Media Player plugin I'm using. I want to embed 6GB MPEG-2 videos into my web pages. I have some videos on my PC and I want to be able to watch them remotely by connecting into my web page. It works fine when I'm at home; other PCs can connect and play the videos no problem. The problem is when I'm at work. When I'm at work, I go to my web page (via my IP address in a web browser) and the Media Player plugin says "Connecting" for a minute, then it says Ready, but the video will not play. I tried using a smaller, AVI file (680 MB) instead to see if the problem was streaming such a large file, but the video still would not play.Do I need to foward more ports on my router so that Windows Media Player can connect back and get the information it needs?
View 4 Replies View RelatedHome Network :: Use Internet Of Workplace From Home Via Dial-up Connection?
Oct 3, 2011I have ADSL modem in my workplace that is connected to a switch and other workplace computers are connected to this switch so the ADSL internet is shared in LAN network.(in each of computer I set default Gateway to ip of modem .....)I want to dial my workplace from home and then use of workplace internet or connect to workplace LAN.(such as VPN or Port Forwarding or I don't know...)
View 11 Replies View RelatedHome Network :: Latest Ethernet Cable For Home Wiring?
Sep 20, 2011I'm currently in the process of buying the new property, which is in the build process and would like to put some cables across 3 floors, which would be connected to the router downstairs.
View 3 Replies View Related