Linksys Wireless Router :: Samsung BD-D5300 Blu-ray Causing IP Conflicts
Oct 18, 2011
I just bought a Samsung BD-D5300 Blu-ray player that allows a bunch of networking options including wireless and wired. I was using the wired option when I came across some conflicts with my network using a Linksys WRT350N v1. The Samsung conflicted with the Linksys's DHCP server. The blu-ray player turns off automatically when inactive. It was causing conflicts with my iPad 2, MacBook Pro and Motorola Atrix android phone whenever it got assigned an IP address. When I reset the router and my cable modem, it wasn't assigned an address for awhile, which fixed things, but as soon as it got an address again, it was caused conflicts by being seen as a LAN by my router. When it wasn't receiving an address, it got the automatic private IP address of 169.x.x.x. When I removed the connection with my router, the conflicts disappeared and my computers were able to access my wifi again.
View 1 Replies
ADVERTISEMENT
Jul 25, 2011
Since recently replacing my home router with a Linksys E2500, I have been getting Blue Screen of Death (BSOD) with my Company's VPN (AT&T). It only happens when I am running wireless with my E2500. If I am hooked up to my E2500 through a ethernet cable it doesn't happen. I have updated the BIOS on my Lenovo Thinkpad T410 and ensured all of my drivers are up to date. I am 99.9% sure the problem is caused by my Linksys E2500 because I have used my laptop on other wireless routes at work and school and never get this problem. I am also ensured that my E2500 has the current firmware installed and upgraded my Company's VPN to the most current level to no avail.
I am getting DRIVER_IRQL_NOT_LESS_OR_EQUAL Blue Screen of Death in agnfilt.sys.
View 9 Replies
View Related
Jun 30, 2011
For some reason, I have been trying to use QOS for several network related jobs (VPN, streaming). It would seem that when QOS is enabled and the appropriate ports are set which a high priority, the speed of my connection drops to a crawl. When I disable QOS, I'm flying again. I have confirmed ports, and protocol types (TCP or UDP) and nothing seems to work.
View 2 Replies
View Related
Nov 28, 2011
I set up an E1200 about two weeks ago to replace our old DI-524 because our net speeds were getting throttled (the old router wouldn't support anything higher than 10mbps). The same day, we started getting modem resets (We have an SB6120). This never happened on the old router but it's constantly happening with this new one. It'll happen multiple times a day. I called Cox Tech Support and they pushed an upgrade onto the modem but it still reset. I don't think it's the router, since I don't understand why it would force the modem to reset, but this never happened before I installed it. The firmware is updated to the latest version on the Cisco site (1.0.02).
View 5 Replies
View Related
Jun 19, 2012
I've had an E4200v1 in use as my home's main router for about 3 mos. And while many others have reported disconnect problems (I think), I myself have never seen any. My router and its N & G wifi networks have been rock solid. Until yesterday that is.Now all of a sudden, most of my family is complaining about wifi disconnects, slow speeds, etc. (My primary PC is hard-wired so I don't see any problems whatsoever... the problem apears to be wifi-only)And the Apple devices (OSX & IOS) seem to have the most severe problems. But Windows devices have also seen problems, just not as critical.Also, it's worth noting that I've been running 1.0.04 the whole time, without any problems... it seemed relatively stable to me. That is until yesterday.
I've bounced the router, I've disabled/re-enabled Wireless G network. I've switched mode from "mixed" to "G-only" back to "mixed". I've changed the channel width back to the default of Auto (I had been using 20Mhz), which increased my throughput (as measured by Qcheck) so I'm leaving it "Auto".
View 9 Replies
View Related
Mar 29, 2012
I have an E1550 less than 1 year old. Lately, I have been losing internet on the AT&T modem. I called AT&T but as part of their diagnostics, I have to plug the modem directly into the PC. I have loaded the latest firmware to the E1550.Lose Internet but wireless connectivity to router exists.Internet light on modem is out (modem is connected to router)Unplug modem and leave off plug in, internet light is still out.Unplug router, plug router back in - no internet connection but do have wireless connectivity to router.Take cable from modem to router and plug directly into PC internet light comes on in modem and I have internet from PC.Take cable from PC and plug back into router .I have internet via wireless.What I can't figure out is what could be happening in router that would impact modem internet connection. I have replicated this at least 3 times. Yes, the modem is a bit old, but since plugging it directly into the PC works, I'm thinking it has to be the router and I cannot figure out why unless there's some sort of electrical thing going on in the router.
View 4 Replies
View Related
Feb 4, 2012
I work from home on a Lenovo Laptop. I connect to my work network, and ultimately to a midrange ISeries. For the past year I've had no major problems with my Netgear Linksys WRT54G. I switched to a Netgear N300 last weekend because my husband's desktop was having a lot of issues. His connection is much better now.I'm able to connect to the internet with no problem, and I can access my company network & email pretty well. But, when I log on the ISeries it slows to way less than a crawl. According to my netwok icon, the connection is anywhere from 104 to 130 MBPS at any given time. But it freezes up so badly that it takes about 20 - 30 seconds just to type each letter, or to go from one window to another, or just to move the cursor down one line. It's infuriating. Every once in awhile if I disconnect and reconnect it works almost normally for awhile, but eventually slows down almost to a stop again. I actually worked for about 90 minutes the other day with no problem before it started acting up again. When I put the old G router back it works fine again. My laptop has an Intel(R) Centrino(R) Advanced-N 620 wireless adaptor. As long as I don't connect to the iseries, I have good speed and no issues with the internet or work intranet.
View 1 Replies
View Related
Jul 6, 2011
My new HP Touchpad 32 GB is causing my E4200 to reset. I can duplicate the issue by simply access the HP App Catalogue. I upgraded the firmware from 1.01 to 1.03 build 13 and the issue still exists.
View 1 Replies
View Related
Mar 28, 2013
I'm thinking of purchasing a Cisco Linksys EA6500. I need a router that can one monitor bandwidth used by device. Keep exceeding our ISP's network bandwidth allocation, need to identify the devices that are causing this high usage and be able to do so from the router. Does the EA6500's standard software support this, is their router software one can obtain for the unit that does this or is there another home router option that can perform this function?
View 6 Replies
View Related
Feb 15, 2012
So now I have a good connection with my secondary router going to my acer a500 android tablet, my laptop, and panasonic viera tv. All is good thus far. However, I cannot connect my Samsun BD-C7900 Blu Ray. What is really wierd is that the 5 Ghz and 2.4 Ghz have two different names on my router (cause that is what the cisco support tech told me to do- give them separate names) but on the Samsung BD-C7900 - it shows that there are two signals coming in but with the same name! When i tried to connect i get an error message. Keep in mind my E4200 v2 is secondary router connected to fios actiontec.
View 1 Replies
View Related
Jul 26, 2012
Just purchased an E900 wireless router and cannot figure out how to connect my Samsung wireless printer. The printer has a WPS button, but the router does not. The router wants me to input information into the Samsung printer, but the printer has no screen, and I cannot find a place to input the router info anywhere in the Samsung software. I am going crazy here...I'm not a techie, but I'm also not a complete technology idiot.
View 2 Replies
View Related
Sep 25, 2011
I get a great wired connection but when I try for wireless the Samsung says I have a great connection, except when I try to use the Apps from the Blu Ray it tells me, No Internect Conncetion. Samusung support tells me I need to "open the ports" on my E3000 and make the Blu Ray a priority...I don't know how to do that.
View 7 Replies
View Related
Sep 21, 2011
When I try to connect the galaxy to the wireless network, the tablet shuts down (to the start page, unlock page) when it is searching for the ip address for the network. The firmware is 1.55.02. Cannot get upgrade as not available from Cisco. Have disconnected all other devices from the network in case there is some interference problem.
View 1 Replies
View Related
Mar 26, 2013
I've Linksys EA6500 router and tried to connect my Smart TV (Samsung UE-40EH5307) via cable.DHCP server is turned on
1. TV can't get IP address
2. When I entered IP, Gateway, DNS manualy in my TV it connects to router but not to internet.
3. When I switch cable to my laptop it registered and get dynamic IP without any problem.
4. I've insert WIFI adapter into TV and it connected and got dynamic IP without any problem.
View 9 Replies
View Related
Jan 29, 2013
I have been trying to connect my smart tv to my wireless network for the last 3 weeks. It connects intermittently but the connection is always lost within a few minutes to a couple hours. I have turned off all of the firewalls, and all other devices connect fine. It is an ea4500 running on updated firmware and a Samsung 6900 smart tv. The connection works if I run an ehternet cable to it oith from the modem as well as from the router, but it does not work over the wireless connection.
View 7 Replies
View Related
Feb 11, 2011
Trying to connect a Samsung clp-315w wirelessly to my E3000. I plug the Ethernet cable into both to configure the printer and I cannot access the printer via its IP address. I suspect the printer is reporting the wrong IP address or it the IP is not being assigned by the router or it is being blocked by the router. Routers firewall is off. I use the Samsung software and it does not see the printer either. It seems the router is not seeing the printer or allowing it access to the network. Spent much time with a good Samsung support person and tried everything and narrowed the problem down to the router connection. Is there a setting on the router which needs to be changed to allow me to see the printer to configure it for wireless access?
View 6 Replies
View Related
Dec 8, 2011
So the problem is this: I have a Samsung TV (LE32B650) with the most recent firmware installed, connected via wire with the WRT160NL.The router also has a 320 GB disk plugged in with a bunch of movies.When I use the uPnP media server with Windows 7 PCs (wirelessly) or even a Samsung smartfone it all works very well. However the TV has an issue disconnecting from the media server in just moments from turning the DLNA function.Well to be more precise the TV says the the media served got disconnected.The router has the latest firmware, I have tried with HDDs ane thumbdrives (with just 1 AVI to make sure there is no conflict of unsupported file formats), I exchanged the wire (TV<->router), added guest user to access the partition with all scanned folders.
View 3 Replies
View Related
Mar 23, 2011
I'm on the road traveling and am having trouble with receiving an ip conflict error message shortly after connecting my windows 7 laptop to this particular hotels wireless network. Shortly after connecting to the correct access point is when the msg appears. I've checked my wireless adapters IPv4 TCPIP properties and ensured Use DHCP is enabled and that IPv6 is disabled. I've done a release and renew on the address after connecting as well (ipconfig /release and renew)to still no avail. Oddly enough, my internet connection works great in the morning at this hotel but has this problem at night time. Are there any known issues with 7 or such a thing as a Windows 7 "unfriendly" wireless router? I don't have this problem at home on my Linksys wireless router. Works fine.
View 1 Replies
View Related
Sep 3, 2011
So I just bought and recieved a new computer with the wireless WMP600N.
I turned the computer on and a had small lags every 5th second or so which, even though they are small, are pretty annoying. I then tried to look for a reason as to why this happens and what i found out was that if a turn off the wireless internet connection the lag spikes stops and if I turn it on they occour.
My computers specs are:
I7 2600k 4x 3,40ghz
Nvidia geforce GTX 570
8 gb 1600mhz RAM
WMP600N wireless-N PCI
Windows 7 64xbit
View 2 Replies
View Related
Nov 25, 2012
I use a wireless laptop and a wireless printer with no problems until my lodger's friend comes and connects to the network. That is when I lose printer connection and sometimes get the IP address conflict message. Obviously something to do with his laptop wireless connection
View 1 Replies
View Related
Jan 11, 2011
I am using a WRVS4400N as my primary router for a small office. I get the following message repeated over and over in my logs. This seems to happen for 2 or 3 days and then it will go away for about a week and then come back. What is causing this? The best I can tell I don't have any IP conflicts on the network and most of the time the network has very little traffic other than 2 or 3 computers surfing the web. [code]
View 19 Replies
View Related
May 12, 2010
As the subject says, I've hooked up a Samsung BD player to a BEFSR41 router. The router has the current firmware version. When I run the connection test for the player, the local connection is good but the Internet connection fails and the message is " The HTTP port is disabled."
I've searched high and low for a solution to no avail. I did searches on the forum and couldn't find anything. As a test, I connected the BD player directly to the DSL modem and the Internet connection worked perfectly so it appears that the blockage is within the router.
I've serched through the router setup and have changed most settings to try and find something that would work. Nothing worked so I have returned my setup to its original state.
View 7 Replies
View Related
Nov 11, 2011
LAN subnet conflicts with WAN subnet. My router is d-link 825 and my cable modem is Cisco EPC-3825. Op system is W7. Everything worked great with an older cable modem (Cisco 3000).
View 4 Replies
View Related
Jun 5, 2012
How do i stop ip conflicts when using 2 or more laptops on home network
View 1 Replies
View Related
Dec 27, 2012
I purchased an Samsung UE46ES6300 Smart TV for my Boyfried for Christmas & we are struggling to connect it to our WiFi to use the features. Obviously I went through the procedures - Network settings, found my WiFi, typed in my Network password & unfortunately states: 'Unable to connect to the Wireless Router'. Taking into account my Virgin Media Router is directly next to my TV? The Wireless & Internet is 100% working as we have other devices running of it - I-pad, Laptop, Phones etc!
View 9 Replies
View Related
Feb 27, 2011
We have a new 2911 that needs to be configured, unfortunately it's at a remote site. I had installed the following config: [code]
Now, I do get a dhcp ip on the G0/0 interface and I can ping it from my remote network and the local router as well as the local lan. The hands and eye guy is able to telnet from the local lan but I am unable to telnet from either my remote lan or the local router.The only error I receive is "connection refused by remote host". All lines are clear so I have no conflicts with multiple telnet sessions.
View 8 Replies
View Related
Jan 6, 2012
Samsung blu ray BD5700 is not saving the security key to my cisco lynksys router model E1000 after blu ray is powered off. I have spoken with samsung and followed their reconfiguration instructions which did not work. They suggested something was wrong with my blu ray player. I returned the blu ray to the store and exchanged for the same model hoping it was a problem with that device but the new blu ray is doing the same thing. I spoke with cisco lynksys support but they won't assist b/c my lynksys customer support has expired
View 4 Replies
View Related
Aug 23, 2011
How do i configure my netgear router to my samsung blu-ray player to allow wireless connection?
View 2 Replies
View Related
May 15, 2011
Im trying to configure a 7204 for radius login authentication, although the router is also configured with radius for VPN access. How can I configure it for both using 2 different raidus servers? the login via radius is working fine on another router, although that one is not doing VPN access so there's no conflict.
My config:
aaa group server radius RADIUS_AUTH server x.x.3.11 auth-port 1645 acct-port 1646
aaa authentication login networkaccess group radius local
[Code]....
For some reason, this does not work. I cannot access the router and authenticate via x.x.3.11 radius server. I think there's a conflict between the VPN and the login authentication but im unsure how to resolve this.
View 3 Replies
View Related
Aug 31, 2011
If my computer has been sitting for a while without using the internet and i open my browser the dsl and internet lights on my router shut off for about 15 seconds and no one in my house has internet and then it turns back on. this ONLY happens when it has been sitting for a while with the browser closed and my computer is the only one that makes it do it. also i don't have my computer set to sleep after a certain time, my monitor turns off after 5 minutes and that's it. i have a siemens gigaset se567 and my isp is telus.
View 1 Replies
View Related
Mar 24, 2011
I'll access a site like [URL] normally the first 2 or three links will work that I click on and then maybe the third link will cause a timeout. I'll refresh the page after receiving the timeout notice and it'll appear fine. This is happening to other sites aswell. The reason I know it's the router is when I plug my PC directly into the modem, I don't receive this problem. The problem is happening with my laptop, PC and iphone. I've asked the ISP to go over the settings in my router to make sure they're all configured correctly and they say they're not trained on troubleshooting routers so they direct me to Netgear again. I don't really know what I should be looking at in the router page (I don't know much about routers/networking),
View 10 Replies
View Related
Aug 27, 2012
I've just bought a new Samsung 3 series laptop (Windows 7 Home Premium 64 bit). I have two braodband lines at my home (1: Sky with standard Sky wireless router. 2: BT with Netgear wireless router). The Netgear router is primarily used for business but I also use it to connect with my old Dell laptop and my iPad. However I cant seem to connect with my new Samsung laptop to the Netgear router. I want to get rid of the Sky broadband line but neet to get the Netgear line working correctly first.If i turn the Netgear router off and then on again the laptop can see the router and picks up the wireless signal and connects for a few minutes before it drops off and then it can find it again. The laptop does similar with the Sky router except that the connection seems to last longer before it drops off and at least it can always see the Sky wireless signal for me to reconnect again.
View 3 Replies
View Related
Jan 3, 2013
decided first of all to connect an old router to the master (but not test) socket together with different cabling & splitter/microfilter - everything starting working almost perfectly (apart from downstream data rate was considerably lower than expected each time I connected - between about 1400 & 1600 Kbps - I have max. 8 Mbps).when I connected back my current router everything continued to be OK (apart from low downstream data rate) - until I would restart the current router and everything went back to very very slow.
View 5 Replies
View Related
