TP-Link Dual-Band Wireless :: TL-WDR3600 / UPnP Traffic When UPnP Is Off?
Jan 24, 2013
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.23 Build 120820 Rel.73549n
ISP : Cable TV provider
It seems there is a bug with TL-WDR3600. As it can be seen in the following image, the UPnP is off:But my firewall on the computer is reporting flood of packets originating from the router (it's the routers MAC address and IP address):I don't know what ETH type packet is, 0026 might be hex (38 decimal as seen in the raw log). But port 1900 is definitely UPnP.At the router, the wireless switch is off, as well as all other options for sharing etc. This computer is the only one connected to the router. The router has been reset several times.
View 1 Replies
ADVERTISEMENT
Feb 18, 2013
Region : Netherlands
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 130129
ISP :
I've this dualband wireless router since a week.Now I found out, NFS is working very slow (actually NFS is not working at all).I have a Mede8er and a synology NAS server connected to the TP-LINK WDR3600 router.I have movie directories shared on the NAS using NFS.when I go to the NFS locations in my mede8er it takes very long before I can see the NFS mapping.When I connect the Mede8er straight to the Synology NAS server (Cross Cable connection) NFS is working as it should be.So the TP-LINK WDR3600 cannot handle the NFS protocol?
View 2 Replies
View Related
Feb 27, 2013
Region : Brazil
Model : TL-WDR3600
Hardware Version : V1
Firmware Version :
ISP :
I want to change the antennas on my wdr3600 to increase the range of the signal because my walls are too thick. I can not find TP link brand Dual Band Antennas, so I search ebay and found this:
[url]....
Any dual band RP-SMA antenna is compatible with the WDR3600? or do I need to search for something in particular?
View 1 Replies
View Related
Feb 8, 2013
Region : UnitedStates
Model : TL-WDR3600
Hardware Version : V1
Firmware Version :
ISP :
I recently bought wdr3600 and just trying to configure bridge through WDS configuration. I just enabled WDS and picked my initial wireless router after clicking the Survey button, then save it. After the reboot, I cant seem to ping/access 192.168.0.1 and the wireless SSID cant be seen any longer. I tried doing the reset button for 30secs but looks like nothing is working and not resetting. And I am still getting 169.254.x.x
View 5 Replies
View Related
Mar 1, 2013
Region : Italy
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.17 Build 120508 Rel.45884n
ISP :
I've got two WDR3600
the first one is the main router:
- connected to ISP modem
- DHCP on
- 2.4Ghz radio to serve WiFi clients security WPA-PSK
- 5GHz radio to link to the second WDR3600
protocol 802.11n only
the second WDR3600 is WDS of the main router:
- DHCP off
- 2.4GHz radio to serve WiFi clients security WPA-PSK
- 5GHz radio to link to the first WDR3600
protocol 802.11n only
All is working fine, however WDS connection works only with security off. WPA-PSK is not selectable, cannot test WPA2, no radius server available, WEP not supported due to incompatibilty with 802.11n protocol. Is this the expected behaviour? How to get WDS working with WPA-PSK encryption? Could this be due to the firmware or s it a limitation of Atheros chipset?
View 1 Replies
View Related
Dec 19, 2012
Region : Netherlands
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 120820 Rel.73549n
ISP :
I recently purchased an TL-WDR3600. Setup was easy. Both wlan channels work perfectly. All clients can connect to the internet and access my lan connected NAS. I have some wlan devices which needs to be connected sometimes by http: port 80 and also by telnet or ssh. I can connect from a wlan device to a lan device. But NOT from a wlan to wlan or a lan to wlan. I allready diabled WMM and tried some other wlan settings, like disable one channel, changing the channel width etc.
My setup is : ADSL device -->(192.168.1.X dhcp) WAN TL-WDR3600 --> to LAN&WLAN (192.168.0.X dhcp and some LAN connected with static 0.200, 0.210)
View 6 Replies
View Related
May 13, 2013
Region : Ireland
Model : TL-WDR3600
Hardware Version : Not Clear
Firmware Version :
ISP : UPC
how do you add a password for anyone trying to access the hard drive that I have connected to the 3600 via usb. I have guests staying in the house on a regular basis and only want to allow family member to be able to access the hard drive that I have connected to the router.
View 1 Replies
View Related
Jan 6, 2013
Region : Spain
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.23 Build 120820 Rel.73549n
ISP : Portal Wimax
I have enabled USB Print Server on the router and managed to print from my main PC (connected by cable to router).
However, I cannot get it to work on my laptop.
I connected my laptop running Windows 7 x64 by cable to router, ran the USB print server software (latest version downloaded from web site). The USB server software sees my printer (Canon Pixma iP4200). It appears in the list to auto-connect but there is an X against it and if I try and set it to auto connect, I get the error "the port of auto-connect can not be a LPR/Raw TCP/SMB port". Apart from the occurrence of the printer I had installed before (so, yes the printer driver is installed), the USB-server printer does not appear in my system printer list.
View 2 Replies
View Related
Jan 21, 2013
Region : UnitedStates
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : TL-WDR3600_V1_120820
ISP : Cox cable
It doesn't matter how I set it up, once the policy is enabled nothing can get through. This is the same for "deny" or "allow" as default. Is there bug with this new firmware TL-WDR3600_V1_120820??
View 2 Replies
View Related
Feb 10, 2013
Region : Russia
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.23 Build 120820 Rel.73549n
ISP : VIMPELCOM
I have portable hard disk connected to one of the TL-WDR3600 router usb ports (another one has printer connected to it)
Write speed is about 3Mbytes/sec maximum.Real disk write speed is about 35-38Mbytes/sec - if I connect it to one of the PC USB ports (both router and PC ports are USB 2.0)Why write speed via router is so low?
My PC is connected to router via cable and is running Windows 7 32bit Ultimate SP1, hard disk partition is 465Gb NTFS single volume.I'm measuring speed simply by coping 1.4Gb file through Windows Explorer to \tplinklogin.net (following USB storage access instructions from router control panel) in first case and directly to hard disk - in second case.
View 1 Replies
View Related
Mar 7, 2013
Region : UnitedKingdom
Model : TL-WDR4300
Hardware Version : not clear
Firmware Version :
ISP : BT
I am thinking of buying a TL-WDR3600, but just need to know the answer to the question below.Can anyone confirm if the TL-WDR3600 supports NAT Loopback functionality?
View 3 Replies
View Related
Jan 29, 2013
Region : Poland
Model : TL-WDR3600
Hardware Version : V1
Firmware Version :
ISP :
I have some linksys router that I used as wireless client bridge. I have main router that is connected to Internet and linksys router which is connected to main router's WiFi. Linksys router acts as client bridge connecting LAN devices to main router. Now I own TL-WDR3600 and I would like to replace linksys router. How can I achieve the same on TP-Link router? I don't see any option for setting wireless operation mode.
View 3 Replies
View Related
May 8, 2013
Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
I can view numerous other PDF files from other websites, and even PDF files from TP-LINK, but, the User Guide for the TL-WDR3600 or the 3500 error out when opening in a web browser. If I right click and download them, they will download but then error out on opening.
View 10 Replies
View Related
Feb 2, 2013
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.23 Build 120820 Rel.73549n
ISP : VIMPELCOM
To access USB Storage in Windows I simply type "\tplinklogin.net" in Run window.But how can I access it using Adnroid phone or tablet connected by Wi-Fi?Typing "\tplinklogin.net" in Browser adress line brings me to Google search, typing simply "tplinklogin.net" opens router web interface..
View 11 Replies
View Related
Feb 17, 2013
Region : Spain
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.26 Build 130129 Rel.59449n
ISP :
I've recently bought the TP-LINK WDR3600 and am very happy with it. I'm using its media server feature so I can watch movies on my TV through DLNA, but have found a problem: the MP4 files are not shown. All the other files work perfectly (AVI, MKV), but the MP4 files are not shown in Windows Media Player or LG Smart TV. I assume the Media Server software simply does not include this kind of files when scanning. Is there any way of accessing the media server configuration file and "enable" MP4 files?
View 4 Replies
View Related
Mar 6, 2013
Region : UnitedStates
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.26 Build 130129 Rel.59449n
ISP :
I try to attach an external hard drive to my TL-WDR3600.
The hard drive: TOSHIBA Canvio Desk 3TB USB 3.0 Black Desktop External Hard Drive HDWC130XK3J1 Formatted w/ NTFS, 4kB Block Size (default)
When I attach the drive and click Rescan in "USB Settings" -> "Storage Sharing" nothing happens.Message is still: No volumes found. Plug an external USB drive into this Router, wait for 10 seconds and then rescan the volume.
No entries are made in the "System Tools" -> "System Log" when I attach the drive or click rescan.
The drive works fine on my desktop PC running Windows 8.
I realize that it is a USB 3.0 drive, but I understand that USB 3.0 should be backwards compatible to USB 2.0. In fact, the drive works on both, USB 3.0 and USB 2.0 ports, on my desktop PC.
What are the requirements and/or restrictions for USB hard drives on the TL-WDR3600? The information I found was, that they need to be either formatted with NTFS or FAT32 (FAT32 is not an option here due to the disk size). Are there any size restrictions for external drives on the router? Why are they not listed anywhere (user manual, specifications).
View 4 Replies
View Related
Apr 13, 2013
Region : UnitedStates
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : TL-WDR3600_V1_130320
ISP :
Has anyone gotten the Guest Network feature to work from the new firmware TL-WDR3600_V1_130320?I have my WDR3600 setup as an access point:TPLINK with static IP address connected via ethernet cord from the LAN port and connected to the main Verizon FIOS router which distributes DHCP IP addresses to the netwrok. Can not get the Guest Network feature to work - I see the guest SSID I created but when I connect to it, the IP address assigned is in the 169. range meaning it does not get to my main router.It may be because I have the TPLINK setup as an access point, so are there any people who have gotten Guest Network work either with the TPLINK as the main router or as an access point?
View 1 Replies
View Related
Apr 5, 2013
Region : UnitedKingdom
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.26 Build 130129 Rel.59449n
ISP : Virgin Media Limited
when I forward ports I get the following error message:
Things to note:I have the web GUI running on 8080, because I run a file-server on port 80.
I am using a Virgin media branded router in 'modem mode', this would not cause issues.
I did not do anything to change anything, I went to add an additional port to forward and it didn't work.
I am on a Dynamic IP
After it stopped forwarding, I upgraded firmware to: 3.13.26 Build 130129 Rel.59449n.
View 11 Replies
View Related
Mar 15, 2013
Region : UnitedStates
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.26 Build 130129 Rel.59449n
ISP : Charter
I've set up my printer (HP PSC 2410) to the router using TL-WDR3600_V1.0_USB Print Service Client Setup and that part's fine. The USB Printer Controller sees the printer as an "auto-connected printer" and I can select the printer as my default to print to. My problem lies with the fact that every time I try to print something, it causes a BSOD. I'm using Windows 8 and checked to make sure the USB Print Service Client Setup program was compatible with Windows 8 before I attempted anything. The HP PSC 2410 printer is on the Print Server Compatibility list so I don't know why I'm having problems.
The error I get each time I try to print is: SYSTEM_SERVICE_EXCEPTION (TplinkUDSTcpBus.sys). One of the draws of this router was that I could hook up my printer via USB and print wirelessly
View 4 Replies
View Related
Feb 25, 2013
Region : UnitedKingdom
Model : TL-WDR3600
Hardware Version : V1
I am trying to restrict external access to a ftp server I have running, to a single external IP address. Is this possible? It can be done for the Remote Management IP Address page, where you can enter a single address or 255.255.255.255 to allow all external hosts. But the set up of a virtual server does not appear to have that option.
View 1 Replies
View Related
Mar 23, 2013
Region : UnitedStates
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.26 Build 130129 Rel.59449n
ISP :
I have the WDR-3600 with a usb drive. I have updated to latest firmware 3.13.26. I am having problems with the media server. I have 331 folders shared in the Music folder. When I access it via the DLNA it will only show the first 123 folders. I can access all of the folders via network share but not via the media server. I have checked this on my music player and my android phone and tablet. Both of them can only see the first 123 folders.
View 1 Replies
View Related
Feb 15, 2013
Region : UnitedKingdom
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.26
ISP : Virginmedia
I've plugged a 3tb seagate backup plus external hard drive into the routers USB port and its not being recognised my other wd 1tb has no problem being picked up.
View 6 Replies
View Related
Mar 16, 2013
Region : CzechRepublic
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.26 Build 130129 Rel.59449n
ISP :
1. On my laptop in windows vista media player I cant see any shared media of media server TP-WDR3600: screen.jpg
2. My samsung tv shows all three shared folders of media server. When I try to play any Mp3 and avi files it says unsuported file format. In folder with jpg photos it shows nothing. I can see and play anything from my laptop media server on TV.
View 1 Replies
View Related
Mar 23, 2013
Region : United States
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
I just got the TL-WDR3600.
It seems to work fine and my Smart TV recognizes my network drive or usb hdd connected to the router.
However, the files on the network drive or usb hdd don't seem to appear/work. The folder the files are stored in are recognized, but not the files themselves.
I've plugged the usb HDD directly to the TV and it recognizes and plays the movie files fine, however when trying to find them via the wireless router, they don't appear/work.
Are there some settings i need to change to allow the TV to see/play the files?
View 1 Replies
View Related
Feb 21, 2013
Region : Hongkong
Model : TL-WDR3600
Hardware Version : V1
Firmware Version :
ISP :
When using the USB printer port share function, I found that some PCs, which had never physically connect to a USB printer before, will not have the virtual USB printer port in the port selection. In this way, TP-Link's USB printer controller will not be able to setup the connection. The PC will not be able to use the shared printer from my WDR3600.how can I create a virtual USB printer port in the remote PCs (without need to physically connect a printer to them) or other method to use the shared printer?
View 5 Replies
View Related
Mar 17, 2013
Region : Germany
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.26 Build 130129 Rel.59449n
ISP :
all my systems are configured under "IP & MAC Binding". Binding is activated globally and all check marks for every ID are set. After i finished my configurations, the "ARP List" status shows, that everything is bound - so far everything is great. The problem appears after a router reboot or after shutting the router down and powering it on again. The "ARP List" then shows only a few of my IDs and their status is unbound. I need to go back to the "Binding Settings" and hit "Save" - after that all my IDs appear in the ARP-List and everything is OK again.
View 3 Replies
View Related
Jan 25, 2011
I just bought Air Video for the ipad, It needs support for the UPnP or NAT-PMP protocols, so does the wireless n do set this up automatically or do you have to manually configure the router, and if so how.
View 1 Replies
View Related
Jun 24, 2012
My Dlink DIR-655 is hardware ver B1 and firmware 2.00. I found the UPNP cannot cross between wired and wireless network. It is fine if both UPnP server and renderor are on either network. There is no problem on other protocol, such as SAMBA from my notebook connected via Wireless to the QNAP NAS connected via Wired to the 655.
View 9 Replies
View Related
Dec 22, 2012
Region : UnitedStates
Model : TL-WR842ND
Hardware Version : V1
Firmware Version : 3.12.22
ISP : Bright House Networks
I'm having a problem as my PS3 keeps showing up as UPnP not available even though it is turned on in the router menu. What can be the cause? I want to say there is something wrong with the PS3 and not the router.
View 6 Replies
View Related
Feb 28, 2013
Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : Comcast
Why am I unable to "disable" the UPnP in my TP-LINK TL-WR1043ND wireless router? When I click on the "disable" button nothing changes. I click on the "disable" button that then click of "refresh" and it still doesn't change to disabled.
View 3 Replies
View Related
Jan 14, 2013
UPnP seems to be failing somewhere between a few hours and a few days. It will work as expected for a while after starting or restarting the router, but then trying to create any new UPnP mappings will fail, and the ones that have been already created usually stop working. The commandline client upnpc fails to locate the router automatically, and manually navigating to http://192.168.0.1:65530/rootDesc.xml in Chrome returns a connection reset error instead of the expected XML device description.I turned on debug messages in the logs, but there doesn't seem to be anything useful in there (though they also seem to be flooded with a bunch of IPv6 mDNS network hopping, so I'm going to try disabling that for a while and see if that works). I did update to 2.10 and still had the same issue with UPnP, however my wireless network kept going down (I guess a known issue) so I downgraded back to 2.07. After the downgrade, I reset the router and manually re-entered all my settings (i.e. I didn't import them).
View 14 Replies
View Related
Feb 16, 2013
Region : Hongkong
Model : TL-WDR4900
Hardware Version : V1
Firmware Version : 3.14.0 Build 130206 Rel.34701n
ISP : PCCW Netvigator
I have bought tp-link wdr-4900 for several days and encounter the following problems
1) nfs is not work, whenever I set up the nfs server (using hanewin nfs server), the media player fails to read the media file. (Problem does not appear for the previous ASUS n56u)
2) When there is large traffic rate (e.g. BitTorrent), the whole machine is very unstable, LAN and Wireless dies (SSID disappears, and LAN appears "ERR Connection" and "DNS not respond"), give me a feeling that the router cannot handle high traffic rate and the whole machine slows down and fails.
View 14 Replies
View Related
Jun 23, 2011
I have a DCS-930L network camera that I configured from its Web-based interface. In SETUP | Network Setup, I have disabled both UPnP and UPnP Port Forwarding. In my router's (Netgear WNDR3700) settings, I reserved the local IP address, 192.168.1.80, for the DCS-930L. In the DCS-930L I assigned the network camera HTTP Port 8000; therefore, I can access the DCS-930L on the LAN from [url].... In addition, in the router, I have forwarded port 8000 to the local IP address, 192.168.1.80, so I can access the DCS-930L from outside the LAN.I can access the DCS-930L both from within the LAN and outside of the LAN.
However, even though UPnP and UPnP Port Forwarding in the DCS-930L are disabled, the DCS-930L keeps adding and deleting UPnP NAT rules in the router. In addition, a system at the IP address, 207.232.83.172, keeps attempting to access the DCS-930L from different ports. I traced the IP address, 207.232.83.172, to the ISP, Telekenex, in Los Angeles, California. A partial log from the router is below.[code]...
View 2 Replies
View Related
