WN111v2 On Windows XP Won't Connect
Nov 15, 2012
I just re-installed Windows XP Pro on my desktop. It used to have Windows 7. I used to access internet wirelessly on Win7 with this Netgear WN111v2 adapter. So the adapter is in working condition.
So I put the drivers (tried both version 3.0 and 3.1) on a USB key and installed them on that desktop.The installation went fine, the program runs fine. It can even identify wireless networks around my house.
I chose my wireless network, entered WEP passphrase and it connected. Then in the bottom right side of my screen there is a little commputer and a yellow dot is moving next to it and if I hover over it is says "Acquiring network address".
Here is what I see when I type ipconfig /all :
Quote:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsALESS>ipconfig /all
Windows IP Configuration
[Code].....
View 8 Replies
ADVERTISEMENT
Sep 27, 2012
I've had the Netgear Rangemax WNV111v2 for over 2 years, and it's stopped working about 3 days ago.I can connect to my internet, but only lasts 30 seconds - 1 minute, after that my network settings tell me that I can connect to my modem/router but not the internet, and all of the other computers in my house are working just fine, and are all connected to the internet.
View 1 Replies
View Related
Jun 20, 2011
I have a USB Netgear WN111v2 that has been working perfectly up until now, it can't connect to the network and trying to manually set up the addresses, reinstalling drivers, and trying a system restore haven't worked. Even though the router has a lease for the computer on 192.168.1.11 it's doesn't work, although it will show that it's connecting, it won't ping anything, including the router... WZC utility is stopped?
View 4 Replies
View Related
Jun 18, 2012
I an on this form from my cell right now.. so, the computer i want to get Online with is a desktop and i have been days with this problem.
View 14 Replies
View Related
Dec 31, 2011
I have a win xp laptop which connects via wireless to a cheap belkin router I have a Win 7 pro laptop which is hardwired to the router. The Win 7 machine is NOT set up for home groups. We are all on the same workgroup.
I have added the user name from the XP machine to the Win 7 pro machine with admin rights. I shared a folder on Win 7 and added the user name and gave read/write rights. I have no software firewall.
When I try to connect via win explorer via the workgroup I see the Win 7 machine (after 10 seconds). I see 'User' folder which I can browse and I see the folder that I shared but I can't access it. Access denied...
View 8 Replies
View Related
Feb 21, 2011
I'm trying to set up a VPN connection between two Windows 7 machines (A laptop running 32-bit and a my home computer running 64-bit). By setting up a new incomming connection on my home computer and forwarding port 1723 (TCP) to the IP (static on home network), I'm able to connect using my iPhone (either over 3G or a WiFi hotspot). It should then seem that my server settings are working.Now, when trying to connect using my laptop it won't work. I use "set up new network connection" -> "Connect to workplace/VPN" in "Network and Sharing Center". When trying PPTP, a window pops up asking me to re-type username and password. I use the same credentials as logging in at my home computer (and the same as I've configured on my iPhone), but the server won't accept them.When right-clicking the VPN connection in "Network and Sharing Center", I can go to properties. But I do not know which combination of settings to choose. I don't believe it should be this hard though, when both client and server are configured automatically by the same OS.
View 2 Replies
View Related
Jan 30, 2012
i have a Belkin wireless router that works fine with my new Mac desktop and with my old laptop, but i cant get my old PC using windows 95 to connect.
View 1 Replies
View Related
Nov 24, 2011
I have a new computer that runs windows 7. My home wireless network is wpa and I can access it fine. The network at a friends apartment is wep and while my laptop can establish a connection I cannot access Internet from it.
View 6 Replies
View Related
May 4, 2011
I have a Dell Inspiron E1505, I am currently in France and trying to connect it the University's proxy server, and I have followed ALL instructions provided by the university as to how to go about doing this. Each time I enter the proxy address and everything and it doesn't pop up an error message or anything like that, it simply doesn't connect to the internet or give the opportunity to input my password and username.
View 1 Replies
View Related
Jul 9, 2011
can't connect to the net with win98,,clean install...sys was runnin xp and working fine...formatted the drive and did install..all fine except connecting, comcast kids r do young to navigate it, says they don't support win98..but someone must be surfing with 98.
View 4 Replies
View Related
Jun 17, 2011
i want to know how to connect ncomputing in windows xp.what is the process.when i go to N-Computing Site i can find only the documentation for server2003 and Linux. the documentation for N-Computing for XP
View 1 Replies
View Related
Dec 4, 2011
I'm using a year-and-a-bit old Acer laptop, windows 7. I'm on a wireless network at home, but it keeps on disconnecting me. I always get this message:It'll continue giving this message for a few minutes, and if I'm lucky it will connect me againRestarting my computer/rebooting the router, turning everything off etc. doesn't work, and the windows diagnostic thingy doesn't come up with anything. None of the other computers in my house get this problem
View 1 Replies
View Related
Feb 14, 2012
My laptop suddenly stopped being able to conect to my home wifi router. It stays at "waiting for network to be ready" while at the back the wifi list stays at "acquiring network adress" for a couple of minutes and then resets to regular disconnected status.All my other wireless gadgets at home can connect with no problem whatsoever.Wifi strength is great and, when disabling security, the laptop connects without a hitch and very quickly. I tried all possible security combinations the router can give me, always using a second wifi device to check if connection and browsing was possible.i tried everything I googled: drivers, firmwares, ipconfig reset renew, started and stopped services, to no avail.
View 14 Replies
View Related
Apr 23, 2012
My Windows xp professional pc to router via ethernet cable. PC says connected to internet.
View 7 Replies
View Related
Apr 30, 2012
I have a spare PC, monitor, mouse, keyboard etc I said he can use that instead as I don't really need it now I have my Windows 7 machine.So I formatted XP on my spare machine to start afresh, purchased a cable to run from the router to the spare pc (which is connected to the modem) and the other cable runs from the router to my PC, hence I can type this. Since I can get online it isn't an ISP/router/modem issue, so that's clear.When I installed XP on my now spare PC I did have to fiddle to get the internet working?The PC motherboard is an HP Compaq d230 MT, and the steps I have taken is:From this website [URL]
1. Installed Chipset driver
2. Installed Broadcam Network driver
3. Installed Gigabit Network driver
4. Installed 56k win driver (wasn't sure if it's needed though)
5. re-started PC
It still doesn't work, and under device manager, the Ethernet Controller has a yellow question mark. Opening it up, it says there is no driver installed and says (code 28)
View 4 Replies
View Related
Sep 17, 2012
recently, I have been unable to connect to my network.When I attempt to, it tells me that windows cannot connect to hsusnet(my network name)when I try to troubleshoot, it resets my network adapted and tells me to turn my modem off and on.
View 8 Replies
View Related
Oct 20, 2011
I cannot get my computer to connect to the internet including, but not limited to system restoring to an earlier restore point prior to developing the problem. Doing a system recovery which basically reset everything to manufacturers (except the internet connection). Following several sets of directions which seemed like they might apply to me including manually entering the ip info into my LAN.The latest attempt was to try to "reset my winsock catalogue" with: netsh int ip reset catalog command in cmd. This resulted in a list of errors stating that the commands had to be Run as an administrator. As I am logged in as administrator on the computer, I'm not sure how to rectify this latest little bit of folly.
View 14 Replies
View Related
Oct 23, 2011
i have recently bought one of these netbooks, im not very good at this sort of thing so trying to learn, im trying to get on the internet but when i click the internet explorer option in just comes up with a sign saying "THE PAGE CANNOT BE DISPLAYED, you may need to adjust your browser settings", my partner has a laptop here at home with me that is wireless so i dont know whether or not i can run it off this??do i need to go into some sort of option in my network settings?
View 3 Replies
View Related
Aug 8, 2012
My laptop freezes about one minute after getting to the Desktop screen. Everything I need to do MUST be done via Safe Mode. I would like to get rid of this tick as efficiently as possible, so I'm counting on the "issue snipers" from TSF?
General Dynamics GoBook V-2
Windows XP Professional
Version 2002
Service Pack 3
Processor Intel Core 2 Duo T7500 / 2.2 GHz ( Dual-Core )
Memory 1.0 GB / 4.0 GB (max)
Hard Drive 80.0 GB - Serial ATA-150 - 5400.0 rpm
Display Type 13.3 in TFT active matrix
Graphics Processor Intel GMA X3100 Dynamic Video Memory Technology 4.0
It started two days ago out of nowhere. It simply froze in the middle of composing an email. I was performing my routine business tasks that I always have done: emails, Google searches, composing letters, etc. I do not use the laptop for gaming. I thought a simple restart would clear the issue (as this laptop is very powerful and fast, with no issues at all), but yet again it froze about one minute into getting on the Desktop screen. In normal mode, the Desktop starts up and start-up audio sound is present, then while the laptop is "thinking" and processing the services, it freezes. No movement of pointer, keys or even Ctrl/Alt/Del is attainable. I must perform a "hard off" and always restart into Safe Mode to accomplish anything.
I can ONLY access internet and my files in Safe Mode. Normal Mode ALWAYS freezes. Safe Mode runs like lighting, but the only issue is that - of course - there is no audio, which is absolute important to me in my line of work. I have hardly any programs installed on the laptop that would be excessive or detrimental. Print Shop 22 (690.00MB ), CyberLink PowerDirector (766.00MB) and Microsoft Streets & Trips (1,072.00MB) are the "largest" software programs by far. No music files, no video files and few image/document files (721KB). The bulk of the memory are the standard hardware/software files that come with the laptop. Over 60% of the memory is free space. I like to keep my laptop bare bones as much as possible for maximum performance, that of which I had up until 2 days ago. I always clear my address history everyday in both Mozilla and via Control Panel, and I always empty my Recycle Bin daily as well. I was notified that an attack WAS happening, and I immediately activated my anti-virus. The virus was removed, but it looks like it left this one, annoying issue behind for me to deal with.After reading through so many posts on so many different tech support sites, it seems like the symptom could be that some services may be contradicting each other and causing the freeze. Again, this is just my assumption based on what I've been researching, as well as the other tasks (from this site) I have attempted to correct this issue:
* Ran Malwarebytes full scan, found viruses and killed them.
* Created another User Profile to access (in case it was a profile issue). Freezes the same way as it does on the original, normal profile.
* Cannot access any Windows or Microsoft updates via their sites.
* Performed a Disk Defrag and a Disk Cleanup. Utilized my Registry Repair Wizard tool.
* Cannot access System Restore in Safe Mode, and quick search in normal showed all previous restore points deleted.
* Performed a CMOS by removing the battery for about 20 minutes while unplugged, and also discharged excess charge with the power button.
* Free of lint, dust and hair
* Fan is spinning and cooling as needed.
There is NO disc drive whatsoever on this laptop, nor do I really want to reformat/clean install (if necessary).
View 9 Replies
View Related
Mar 10, 2012
I have three laptops and a NAS in our house. I can access the NAS fine from the Win Vista computer, but not the Win XP (sp2)machine.I can ping the NAS and can access shares through the web interface, but when I try to add a network location and use 'browse' or try to type in the address directly it cannot find it. Similarly, nothing shows up under 'My Network'.I do not have a firewall on this computer and file sharing is enabled.
View 3 Replies
View Related
May 27, 2011
I am running Windows 7 on a Fujitsu d 9510 laptop. My laptop has stopped connecting to my router wirelessly, although it can detect it. I have uninstalled and reinstalled my wireless lan driver. Curiously, when i configured my router to be open (No Security key required) it says limited access, and when i require it to ask me for security key it does not connect at all saying ' Windows could not connect to (name of network)'.
View 8 Replies
View Related
Apr 14, 2012
Last week my laptop would connect to the wifi just fine but just a couple of days ago when ever I try to connect it to the wifi it just gives me the "windows cannot connect to network" error message almost immediately. What really stumps me is that the three iPads (school provided) in my house and my sisters laptop all connect to the wifi but my laptop It may have something to do with the fact that I started a homegroup so I could print stuff from my laptop and that the password for the router was changed to something easy a couple of days ago by my sister to make it easier to connect from her iPad?
View 3 Replies
View Related
May 10, 2012
I'm staying with friends who have a router connected to their modem, which is connected to a computer.Three other computers connect remotely via wireless, including mine, which is the farthest from the connection. I have a so-so USB wireless that gets the job done, but isn't anything special. This morning I came home to find my connection was very laggy and spotty. I rebooted the modem and router,which reduced me to no internet connection at all. I removed the adapter, plugged it back in, then rebooted. Nothing. Since then, I've reinstalled the adapter's software twice, gone into safe mode and back out, have verified the USB port is working, and removed the device from device manager. And I've seen everything on my status from the yellow yield sign to the unplugged icon symbolizing no adapter period, even when the adapter is plugged in.All other computers have access but mine. Just before writing this, I remove the connection settings and reentered them. The connection asks me for the key, I put it in, and receive "Windows could not connect to <the network>. I receive that even if I intentionally put the key in wrong. No "key is incorrect" or "please reeneter" just "windows could not connect." My wireless adapter's settings verify that there is signal. There was a thunder storm today, and I'm mentioning it, but feel insofar as my computer is concerned, it may be a red herring.
I am at a complete loss. There's signal. The usb adapter's software has been reinstalled, and it's attempting to connect. I think the fact that it's not giving me any response about the key being incorrect may be the key to this solution, but I am at a loss.My friends insist that no changes have been made to the router or modem other than my resetting them.In the time between writing this and posting it, I unplugged my wireless adapter from the computer with the ailing connection, and went to another computer to continue researching. When I came back and plugged the adapter back in, it connected immediately for about 15 seconds and gave me just enough time to visit my home page (which updates regularly, so I know it wasn't a cache), then fizzled. Then the internet went to zero bars. I disconnected, reconnected, and got limited connectivity with the yield sign. I used the repair tool and got that orange "flame(?)" in front of the connectivity bars and hovering over it yielded "connections are available. Not connected." When I tried to connect again, I received the previous "Windows could not connect to <network>." Rebooted again and saw the yellow yield sign. Then red flame. Then windows cannot connect.
View 7 Replies
View Related
Mar 13, 2013
I am using Win 7 and here is the ipconfig /all result. I also have an XP PC which works using the wifi, so I will also post the result of the XP ipconfig /all result:
Win 7 that does not connect to wifi
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
[code]....
View 1 Replies
View Related
Aug 23, 2012
I am running Windows 7 on an Alienware M11x computer, and, as seen above, I am having problems connecting to the internet. It shows that I have obtained a signal, but a yellow triangle says, "No internet connection available".
View 7 Replies
View Related
Oct 12, 2012
I have a new computer with windows 7. Will be terminal for a server using xp.My computer detects the server but I do not succeed to access with username and password.
I have done the following:
Changed workgroup name to same as the rest of the terminals.Changed computer name to same as my previous computer in the network.Previous computer read only chosen username (+ password) when accessing.This new computer reads both computernamechosen username (+ password) when trying to access.
I suspect that username is not approved due to "double-name" ?
View 3 Replies
View Related
Oct 31, 2011
I use multiple computers in my house, I was just wondering, how would I go about connecting to 2 different networks on Windows 7 simultaneously?I have a router/modem downstairs which is connected to the internet & all of our computers, and I also have a modem/router in my bedroom that isn't connected to the internet, but I'd like to use it to share files and other things throughout my house.I've quite easily managed to connect to both networks at the same time, but as soon I connect to the wired network (the one without internet connection) I lose connection to the internet, even though I'm still connected to the wireless network which is connected to the internet.I've read a few different articles and posts about this same issue, but I can't find how to be connected to both & still have a connection.
View 1 Replies
View Related
Feb 14, 2013
I have two computers one running on Xp and the other on 8, they are positioned next to each other and I'd like to connect them so each can access the other. They are connected via enthral to a common router.
View 1 Replies
View Related
Mar 8, 2011
I have a Linksys Wireless router WRT54G, I am trying to connect a IBM Thinkpad T42 with Windows XP. I have the right Router name and password, but all I keep getting is "Acquiring Network Address", but not connection. Running "WPA" on security. The laptop works fine when connected directly to the router via cable.
View 1 Replies
View Related
Oct 31, 2012
I just bought new computer Acer Aspire V3-571G and i am having problems with connecting to wireless network. I tried installing drivers and it does not work... i know that nothing is wrong with hardware because everything works fine on linux.
View 3 Replies
View Related
Jan 17, 2013
How to connect windows 7 x64 to win xp x32 for LAN gameing?
View 1 Replies
View Related
Mar 10, 2011
I've set up my wireless network and to the best of my knowledge it's safe and secure. However, I'm not 100% sure. Online totorial that'll show me how to Truly Make My Wireless Network Secure? I've got a dual-band Linksys router (model WRT320N).My Windows Vista laptop connects just fine. However, I can't connect my older Windows XP SP2.I think the reason why is because I only have one band of the router enabled?
View 3 Replies
View Related
Jul 5, 2011
I am running an HP pavilion slimline s5610y with Windows 7 installed. It is connecte to a Netgear wireless router via an Ethernet port. I do get wireless to my laptop which I am using to report this issue.In network connections it does recognize my network, but when trying to connect to the internet tries to dial up a connection. I have downloaded and reinstalled the network adapter drivers for the modem (realtek pcie fe family controller) with no luck.I have restored the computer to prior windows updates and have not had any luck.I see that you like to have a hijackthis log. I did download the software from the laptop and try to install via a usb drive, but it stated that an internet connection was required.
View 6 Replies
View Related
