WRT54GS / Slower Internet Speeds On Wireless Connection?
Aug 17, 2011
I have two computers in the house both HP desktops, both run Windows XP SP3. The first one is connected to the internet by ethernet cable through a WRT160N router to a cable modem, the other is in another room ( about 20 feet away from the router with only one wall). The wired computer averages around 15-20mbps download speed while the wireless only gets about 7-9mbps. I've checked them both using Speakeasy.net and Speedtest.net the results are always about the same, the wireless has about half the download speed of the wired connection. They both have .95-.98 mbps upload speeds. When my old router (WRT54GS) finally gave up I bought the WRT160N which is an N router, I haven't upgraded the network adapter in the wireless computer to N yet. My question is should I lose this much speed through the wireless connection or do I need to change the settings on the router or the wireless adapter?
View 14 Replies
ADVERTISEMENT
Oct 9, 2011
I have installed a new ASA 5510 on our internal network as a termination point for our VPN connections. This ASA replaces the VPN termination on our outside ASA. I have setup a VPN group profile and enabled DTLS on the interface on this ASA. The only interface on this ASA is the inside interface. We have done speed tests while on the VPN from both devices. When connecting to the VPN on the outside ASA speed tests show download speeds between 5-8 Mbps and upload speeds of .80-.96 Mbps. When connecting to the VPN on the inside ASA speed tests show download speeds between 2-3 Mbps and .76 Mbps. When I run the "show web-session svc" command on both instances I see that the connection to the firewall on the outside shows that the protocol being used is DTLS however on the inside it doesn't show DTLS.
I think that part of the problem is that DTLS isn't being used. What can I do to improve my download speeds? Will the ASA use DTLS if the interface that is being used is the inside interface?
View 2 Replies
View Related
Mar 9, 2013
I have had an issue with my AE2500 wireless adapter. I am using a LInksys E2500 dual band router but my samsung laptop's wireless adapter doesn't support 5ghz band, so bought the AE2500.I disabled the internal adapter and got the AE2500 connected up. I've set up the 5ghz channel with wireless N, and left 2.5ghz as it was. Somehow I am now experiencing slower speeds on both bands, when using speedtest.net's speed test. It's the 2nd time in my life I am having an issue like this, where I am adding something with capacity for more speed but end up things being worse. Previous was with a netgear adapter and router a few years ago. Maybe I'm doing something wrong but I honestly don't think so.Also best sequence to get the new adapter connected? Should I do it before I disable the existing adapter?
View 9 Replies
View Related
Feb 15, 2012
Basically, my home network is comprised of a WRT54GS Router which the cable modem and my main computer are plugged into (as well as vonage, networked printer). That leaves one port open which is used to connect a Dlink DES-1105 10/100 switch. I am connecting it using a crossover cable, though that was not necessary.I just noticed that a computer connected to that switch gets MUCH less download speeds at speedtest.net, and it gets STUCK on the upload test (doesn't even start).I unplugged it and plugged it directly into the router for testing. I get 20-30 megs down (like I should), rather than 5-11 like the switch gave me (ONCE the switch gave me over 20, not sure why..)The upload test NEVER runs though. I've tried different computers as well. I tried setting the computer to "100 full duplex" manually and no luck.
View 3 Replies
View Related
May 19, 2012
I just bought a 30m CAT6 cable which I installed inside the house, now since my router is on the floor above me I bought a 30m cable to be able to have it downstairs. I don't really know if it has something to do with the PC or if it is the length of the cable that is the problem. But when I try the PC on the main floor the speed is 15-20mbit/s and when I try it on my PC downstairs, all I get is a maximum of 10mbit/s. The strange thing is that ping/jitter is the same both upstairs and downstairs?
View 5 Replies
View Related
Mar 3, 2011
I ran an xp computer for a long time, in WoW i had a latency of around 100-120 which wasnt that bad. Now I built a computer with Win7(64bit) and the latency varies from around 250-370ms.
View 6 Replies
View Related
Nov 12, 2012
I recently built my first PC:
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz, Intel64 Family 6 Model 58 Stepping 9 (overlcocked to 4.1)
Processor Count: 8
RAM: 16339 Mb
Graphics Card: NVIDIA GeForce GTX 670, -2048 Mb
Motherboard: ASUSTeK COMPUTER INC., P8Z77-V PRO
Antivirus: avast! Antivirus, Updated and Enabled
But I have been having major issues with internet speed. I browsed through the forums and, as a result, updated my LAN driver with the latest driver for the Intel LAN Driver V17.3.0.0
I have the virgin media super hub with up to 60mbps download but rarely get over 20 and even then the download of webpages seems glitchy... on evenings it is terrible with 0.5 to 1.5mbps being the norm.The problem is also affecting Chrome which struggles to render maps and stream videos such as 720p videos on youtube even when I have a tested connection of 30ish. I usually resort to using Explorer, reducing videos to 360p or even 240p.I've reinstalled Chrome a few times but still no change.
What is going on??I also have an old Dell Inspiron laptop which works brilliantly with the fast internet - where the speed of the hardware is the only limiting factor.
View 1 Replies
View Related
Jul 14, 2011
I just dumped my dsl for cable and when I ran ethernet straight into the modem from my laptop I was pulling 30mbit to speedtests, but when I go wired or wireless through my router, it's capping at around 16mbit. Any decent priced wireless routers that will get me closer to 30mbit? My laptop has 802.11n and I saw someone locally selling a WRT160n but I don't know if that would do it either. Is the cpu speed of the router the limiting factor? The 54gs is 216mhz cpu, depending on the revision the 160n can be 300mhz.
View 3 Replies
View Related
Jun 24, 2011
upgraded from an old 2004 Toshiba laptop to a Lenovo Ideapad Z570.Now her wireless internet connection is dropping randomly and frequently, it never dropped on the old Toshiba.Using a Linksys WRT54GS with the latest firmware.
View 5 Replies
View Related
Oct 20, 2012
I have a WRT54GS V7 that I have been running for a few years now with no problems until today.My wife used the internet from her laptop through the day but this evening after she moved to the bedroom and booted up the laptop, she found there was no internet connection. I tried what I know in cases like these, unplugging the router or modem for brief periods of time to try and get things going again but to no avail. So I tried using the Easylink Advisor which basically suggested the same process.
At this point, my internet connection is coming in from the cable just fine. I have access on the desktop which is wired and works with no problems. The modem and router lights are both signaling that everything is fine but no wireless internet coming from the router.
Using the desktop I tried looking for some solutions and tried resetting the router. I ultimately called customer support but being out of warranty they wanted too much although she suggested that I needed to reconfigure the router since I had reset it. I followed the online instructions for reconfiguring but still have gotten nowhere.
View 1 Replies
View Related
Jan 5, 2011
Hard wired network (15 workstations.) I had a dsl modem connected to my network switch and linksys wrt54gs router connected to that modem. All hard wired workstations had internet access AND there was a wireless internet connection. With any wifi device I could access the internet.I switched from dsl to comcast. All hard wired work stations still have internet. but when I plug my wireless router into the modem (comcast business IP gateway) there is no wireless internet connection. The hard wired workstations can still get online and there IS a wireless network, but it does not allow internet access (page cannot be found etc.)
Comcast says it absolutely should work. Linksys says it requires simple reconfig of router settings (reset router, clone mac address.) I have read knowledge base articles from linksys and followed each step. The lan ports of the modem are all working if I connect to them directly with a laptop and cable. I have reset router multiple times, cloned mac address, dhcp release/renew.
My physical connections are correct. In the router set up utility, I can see the mac adrdress and ip address but can't tell if the IP is from the modem or the router. Default gateway is always 192.168.1.1 in the router AND in any workstation ipconfig screen. Ip addresses are 192.168.1.xx in ipconfig at any workstation AND in the router set up status.
I cannot access internet via router even if plugged directly into it. It is as if the router is not getting the correct information from the modem. However, it worked perfectly with the DSL modem the day before we changed.My workstations are all hard wired and work. I simply want to have Wi-Fi also... for phones and laptops w wireless etc.
View 8 Replies
View Related
Jun 19, 2012
I recently purchased a 20ft Ethernet cable to speed up my internet connection. On wireless, I would download files at about 2 MB/s. On wired I get 1.5 MB/s. Is it supposed to be like this
View 1 Replies
View Related
Jan 22, 2009
I have a defective DAP-1522, or what. First off, I have never been able to access the unit at http://DLINKAP when my computer is connected directly to the 1522 via ethernet, only 192.168.0.50 works to bring up the web interface.
Second, I have more than one AP at my house, but the DAP-1522 is the only networking device I have have problems with (I am using the unit in AP mode). Basically, the problem is the wireless connection usually is much slower than my other APs (both N and G), even when the computer is physically right next to the DAP-1522. And that's when the unit is at it's best. At it's worst, I can't connect to the internet at all, even though my laptop shows full signal strength. The 1522 just seems really finicky. The problem doesn't seem to be a networking issue, because a 2nd AP that is connected through the wired portion of the DAP-1522 works perfectly, implying the 1522 is having no networking issues when using the ethernet ports. But since the problems persist with full signal strength and with the computer right next to the 1522, it doesn't seem to be a wireless connection issue either. And I have no problems connecting to any other wireless APs I own (and I own about 5 others, not that I use them all at the same time).
If I could, I would return my 1522, but I've been tinkering with it for too long now to return it. It has caused me a ton of frustration. I had a wired-only router for a long time (hence the purchase of the 1522), but just bought a new wireless-N router that is performing perfectly (as a router, and as an N AP). I hoped the old router might have not been playing nice with the 1522, but have seen no improvement with the 1522 wired to the new router (on opposite ends of my home).
Note that I use Macs only, no Windows machines. I started with the 1.02 firmware for the 1522, now have 1.20 firmware, but have noticed no improvements with my issues.
View 14 Replies
View Related
Sep 7, 2012
I have internet thru Century Link (DSL). I also have a Netgear N-300 wireless router. My computer is 4 years old and is an HP with a G wireless adapter buit-in. Until yesterday, my provided internet speed was up to 7mbps. I received the same speed regardless of whether my computer was plugged in directly to the modem (1), plugged directly into the router (2), or wirelessly. We just upgraded our internet to 40mbps. Now, I get the 40 mbps when my computer is plugged into the modem or router, but wirelessly I only get about 4 mbps, 1/10th of what I get with wired.
View 3 Replies
View Related
Jul 18, 2012
I just got a our internet going through our phone modem instead of a separate modem, a new router, and some new rewiring because lighting hit near my house and blew out everything, but now on the computer I built my internet connection drops really low randomly and nothing loads. It happens at random times and for a random periods of time. I ran malwarebytes and super antispyware and nothing showed up. I connect wirelessly with a asus usb adapter.I also tried a different usb adapter that I just bought and no change, and I tried changing channels on the router.Also we have three other laptops in the house and none of them are having problems. It shows me connected with five bars and good signal it just drops to almost nothing speeds.
[code]....
View 7 Replies
View Related
Feb 25, 2011
I have an Acer Laptop that runs on Vista and run my AT&T 3g wireless card on it and it browses the web as if I had a cable connection, however, the I try to use the same card on my Dell that runs on XP and has 768 MB of Ram but it can take over a minute to pull up a website. Should I get more ram though the min requirements for XP are 256 for this connection?
View 1 Replies
View Related
Jan 31, 2012
I seem to have an issue when with my new E2500 router Version 1 (upgraded to the new fireware - today to elimate issues with that).I had RCN installed a 50MB connection today.When I connect directly to the Modem, I get almost the 50MB of the server, see link from the speedtest. [URL]. However, when i plug the ethernet cable from my Cable Modem to my Wireless Router I get around 15-20MB. Here is an example:[URL]. I know speeds can vary, but if i unplugged and rest within seconds i get my expected 50MB.The cable modem is in the living room, right next to the Wireless Router. I am situated less than 2 metres from the devices when I get results and have full bars.I've tried varying the MTU on manual and also enabled it to adjust as required.
View 8 Replies
View Related
Sep 18, 2012
I have recently had trouble with my wireless D-link WBR-1310 Router. Two days ago everything was working fine, my wireless connection from the router to my macbook was fine and the wired connection to my desktop pc was also fine. I went to bed and when I woke up the next day everything was still ok. About 3 hours after I had first turned on the PC that next day my wired connection started spiking and dropping connection frequently, maybe every 5-10 minutes or so. I play world of warcraft and I also use Mumble VoiP Program and my pings in both are over 800 constantly now making it impossible to stay connected to either program. Sometimes it will drop down to regular numbers (25-50ms, I play on eastern servers as I am in NY) but then rapidly jumps back up into the 1,000's. My wireless connection is still fine though nothing has happened to that, only my wired connection is messing up.
I've tried changing my speed and duplex settings on my onboard NVIDIA nForce 10/100 Mbps Ethernet which is what im using but it hasn't worked. When connecting directly through the modem the problem seems to stop so its definitely the router.
Wireless Router: D-link WBR-1310
Hardware Version: B1
Firmware Version: 2.02
[Code]......
View 2 Replies
View Related
Apr 1, 2011
he switch our internet and phone connection, our phone is now with vonage and internet to uBEE. SO ever since then our connection on the computer has been supper sloww. i am unable to play my games such as Crossfire this fps game. everytime i play it keeps telling me failed to connect to server. Then i sent a Support ticket and they told me to take this speed test.
View 5 Replies
View Related
Apr 11, 2012
I recently installed a high speed fibre optic internet in my house. The speed is 20 mbps... When checking the speed at speedtest.net,every other device in my house gives around 17-19 mbps but my desktop shows only 2mbps.. What is the problem??
View 14 Replies
View Related
May 19, 2013
My Belkin F7D4301 Router has the fastest wireless speed of maybe 2MBps but wired with a cat5e cable to my asus laptop of almost 7MBps. I have a one smart TV, one blue ray, one roku, and a nexus 7 using the 2.4 channel.
My Wireless 2.4 settings are channel 11, Extension channel 7, Wireless mode N (have tried with just g and b, g, and n modes), Bandwidth 20/40, Protected mode on, QOS off.
I've talked to Belkin tech support, they are the ones who had me set up my 2.4 channel this way but my wireless speeds stay just under 2MBps, they just want to keep sending me the same model Router because they think each of the new ones they send me is defective.
Am I doing something wrong or is 2MBps the best wireless speed I'm going to get?
View 1 Replies
View Related
Aug 13, 2011
I recently moved to a new apartment to be closer to work and this apartment complex is only covered by what I was told is a wireless hotspot.Basically, a wireless devices connects to the SSID, logs in, and then you're set with the most pitiful internet still available.Now I was told I could pay $70 bucks to have these people (Onlyinternet.net by the way) install a device that would allow me to connect my desktop to the internet service. Wasn't thrilled about that. Its $40 a month, for a 1Mb connection so that wasn't going to happen anyway.Looked up internet connection sharing and had setup my laptop to use it with my desktop.My connection on my laptop has always had a very low signal; between one and two bars no matter where I'm at in my apartment. If I go outside it'll get about 4 bars but that is about it. The actual speeds listed on the Wireless Network Connection Status go from 1Mbps, 2Mpbs, 5.5Mpbs and 11Mbps. Never higher.Today I went and picked up a NETGEAR N300 wireless router. My hope was that the router might be able to pick up the wireless connection and I could just connect through my router instead of having to use my laptop. Apparently, this is not the case.I have to use my laptop act as a modem and have it plugged into the Internet port of the router and then my desktop connected to one of the LAN ports on the router. Is this setup better then using the internet connection sharing deal? Is there any other way of increasing my signal strength and network speeds?
View 19 Replies
View Related
Mar 18, 2011
I recently ran a couple of speed tests to see how fast my internet was, the average reading was about 1.1Mbps, yet the most I've seenmy downloads downloading at is 180Kbps. I am connected wirelessly.
View 3 Replies
View Related
Sep 12, 2011
Currently I have Verizon DSL and which supplied me with a Westell 7500 modem/wireless router. I am also connecting a Linksys WRT54GS (firmware Version: 7.2.08) to the Westell 7500.
When I connect via cable or wireless to Linksys WRT54GS I am not able to establish VPN connection. I get the error “Error 619: A connection to the remote computer could not be established. So the port used for this connection was closed”.
However, when I connect via cable or wireless to Westell 7500 I am able to connect to VPN.
I tried resetting the Linksys WRT54GS to factory settings and reconfigured but no success to VPN.
At work we have a Windows 2003 setup with VPN Role on it and on my laptop I am using the built in VPN connection within Windows 7.
View 3 Replies
View Related
Dec 12, 2012
How do I get my router to connect to roku.When I enter my router password in Roku it doesn't find the router. And when I use Cisco Network Magic, it doesn't find the Roku device.
View 8 Replies
View Related
Oct 8, 2012
I am facing with internet download speed reduced to 1/4th (500kbps) of promised speed (2Mbps).
ISP: Tikona India Type: Wireless unit at roof connected to PoE and ethernet cable
OS:Win7 and ASUS Express Gate I am using the ISP for over a year and was happy but for past 1 month got issues.
The first service engineer came and changed the poer adapter, clipped the ethernet LAN cable. The AI NET 2 utility in BIOS showed the pair 1-2 and 3-4 are short. So second service engineer changed the cable, power adapter and router.
I hoped that things will get resolved but still the speed was slower so the enginner unplugged the LAN cable from my desktop and checked the speed in his laptop. He was getting 2.5Mbps. Then I checked in safe mode with networking and asus express gate but still got reduced speed from 500 to 600kbps.
I had a NIC replacement so tested with that also and got same reduced speed.
View 2 Replies
View Related
Dec 29, 2011
I can't connect my DirecTV DVR to my WRT54GS router. I am using a new cat6 ethernet cable to the router.
View 5 Replies
View Related
Dec 28, 2011
All my previous routers have allowed me to monitor my connection speeds however I can't find this in this router. I found the client table under "status" but I have not been able to find the connection speeds anywhere. I like to make sure that my devices are running at close to 300Mbps and not 54Mbps in case I have a connection setup wrong. I have searched in the forums without much luck.
View 9 Replies
View Related
Jan 2, 2013
I'm having this weird issue with my internet in which my desktop is having inconsistent internet connection, but when I check on my laptop (same room) it shows no problem.I have ATT Uverse, and my desktop's adapter is Belkin N750 DB Wireless-N Dual-Band USB Adapter, while my laptop has some adapter (I don't know the brand, but I know it's 802.11g.Also, my Desktop has much better specs than my laptop. My desktop has i7 intel processor, 4GB RAM (x4 total of 16) and 60 GB SSD boot drive and 2 TB hard drive for all the other softwares. My laptop on the other hand is a Sony Vaio with 8GB RAM and 500 GB hard drive.When going through these inconsistent internet connection phase, my desktop can drop to not even a megabyte per second, while my laptop may be at 8~10 MB download speed, but a tthe same time the ping on my desktop is around 5, but my laptop shows around 17.
View 1 Replies
View Related
May 8, 2012
I have a Linksys WRT54GS (v5) router. I noticed that my firmware was outdated and tried to upgrade it tonight. During the upgrade progress, the browser reset the connection and now cannot access my router configuration pages.I did a hard reset. Then I did the 30-30-30 reset.
The reset worked but no matter what I do, I cannot navigate to any readable page within the router. I get the log in box and successfully log into the router. However, the configuration page(s) are all jumbled and devoid of useful information. It almost looks like a web page that needs flash to be enabled. Lots of colors and boxes but no text or links to other configuration pages
I know it's an old router but it has served me well. I would love to reinstall the old firmware (or new!) and copy my saved configuration file back to the router.Is there a way to access the configuration via a command line interface?
View 4 Replies
View Related
Jan 18, 2013
I'm having a problem where my connection speeds slow down on my iOS devices. I have a EA2700 router. I have PC hard wired into the router, which maintains steady speed test numbers when other devices slow down.i have another pc that connects wirelessly (2.4 only) that maintained speed white the other devices slowEd down. Both my iphone5 and new iPad would slow down. The quick fix wasto turn the wifi on the device off, then the speed would return when reconnected. Also clicking "renew lease" in the iPhone wireless settings seemed to correct the issue.I'm not sure if there is a setting on the iOS devices or the router I can change to stop this.
View 3 Replies
View Related
Nov 25, 2012
I am running windows/XP. I can connect via any of my wired computers but cannot connect via wireless. Easylink advisor states that my wireless has no cinternet connection
View 1 Replies
View Related
Apr 16, 2013
I have a 2wire modem connected to the Internet port of my WRT54GS which is connected to a D link DSS 16+ Fast Ethernet switch. Without the switch, I can connect wired and wirelessly to my WRT54GS. However, when I put connect my any port of my D link switch to ports 1 - 5 of WRT54GS, I loose internet all together either wired/wireless to the router or wired to the D-link switch.I wonder why the IP Address will change as I understand that the switch is just a pass through switch.
View 1 Replies
View Related
