Windows 7 No Internet After Update

Jan 27, 2011

I have Windows 7 Home Premium with Firefox. Suddenly, Firefoxto internet. will not connect to internet.IPconfig shows no media connection.

View 1 Replies


ADVERTISEMENT

No Internet After Windows 7 Update

Sep 18, 2011

Basically when I was done on my computer last night, I went to turn it off, and it updated itself took around 10-15 minutes, must of been a pretty big update, anyway's the next morning I started up my computer and I noticed right away that my time was wrong, the date was correct but the time went back 6 hours so where it was 8 am in real time, my pc showed 2 am. I wanted to google what might of caused this only to find that I had no connections avaliable, I was connected throught my motherboard adaptor Realtek PCIe GBE family controller. Lucky I have an wireless internet card as well and that's what im running the net throught now. When i go to device manager and look at that controller there's an error message that reads "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)" The option to roll back driver is unavaliable as it's just not clickable, and when I do hardware change check nothing happens. Also when I try to update the driver it says that the driver is currently up to date. I am using...

Windows 7 home basic
2600k i7
asrock extreme4 motherboard
gtx 570

View 4 Replies View Related

How To Update Windows 2000 Settings For Gigabit Internet Speed

Mar 19, 2012

Have been running win 2000 pro for last 5 yrs with trendnet pcitxr 1 gigabit nic card. Never had any problem running & connecting. Now cannot access internet @ 1 gigabit, ok @100mbit, for the most part. sometimes browser will lock-up, firefox or IE. Never had any problems like this before. Have changed nic card, replaced cable modem, wires. Have delete trendnet software and reloaded, ran winsock fix, move router cables, ran directly from cable modem, bypassing router, move nic to new slot, ran ipconfig /release & reset. All to no avail. when I ping comes back good. NIC cards I have tried all seem to be working.

View 1 Replies View Related

Belkin Routers :: Update F9L1101 N600 DB Wireless Dual-Band USB Adapter From Windows 7 To Windows 8

Nov 25, 2012

My new Windows 8 computer is not wi-fi capable, I bought the adapter but it only works with Windows 7, they have a link to upgrade to Windows 8 but I don't know where to go from there.

[URL]

View 1 Replies View Related

Way To Update Windows

Jun 17, 2012

I discovered that my LAN port was not found anywhere, even though it was enabled in BIOS. This prompted me to buy a netgear USB wireless adapter which gives me internet access but I'm having several issues now.I am unable to synch my internet time with any server, and therefore cannot use windows update which requires time to be synched for whatever reason.

View 3 Replies View Related

Network Adapter Not Working After Windows Update

Jun 27, 2012

My laptop won't connect to the internet at all and status shows limited access to router. It was fine a few days ago until a Windows update. I did a system restore on it back to before the windows update and the internet was working just fine but then there was an automatic windows update again and the connection is gone again. When I try to troubleshoot it says the network adapter is not working properly. I'm currently using the main computer in the house. I can't access any network at all on my laptop and I'm nearly in tears. This has happened before about 7 months ago after a windows update. At that time I did a system restore and reinstalled the updates and it worked just fine. This time nothing. I have tried to check for updated drivers for the network adapters but windows says I'm running the recent ones.

View 8 Replies View Related

Windows 7 Update Screwed Up Network Drivers

Oct 15, 2012

I had a Windows 7 automatic update last night. Went through the process and when it was done, everything was working fine. I did a proper shut down and went to bed. Woke up this morning, turned on my laptop and now I have NO network drivers. Tried a system restore prior to the "critical updates" and that didn't work either. So what the.

View 3 Replies View Related

Wireless Connection Quit Working After Windows Update?

Aug 19, 2012

My wife's computer was working fine. Two nights ago, a Windows update was automatically installed. Now, it will not connect to the internet. The map shows it connected to the network. We have several other devices on our network both wired and wireless and all of them are working fine.

I was able to use system restore yesterday to roll back the update. It still did not work. However, I tried connecting to a neighbor's wireless. It said something about refreshing the adapter and then it connected to our network and was working fine. Unfortunately, when she shut down last night, the windows update was reapplied. I turned off automatic updates and tried using system restore. It did not work this time. I removed every update that was applied in the last 48 hours but I still cannot get the computer to connect to the internet. However, it does connect to the internet when I bring it up in Safe Mode.

View 8 Replies View Related

Proxy Server For Windows 8 APP Live Feed Update

Jan 20, 2013

All the internet access from my company needs to be pass through a proxy server from the Global server which needs a LDAP user name/password in order to access the internet resource. Recently, I purchase 2 set of Windows 8 professional 64B OEM machine, the IE is ok as I embed the proxy IP/LDAP user name/password etc.. I can also install some Windows APP from the store, however, all live feed seems blocked..Tried quite a lot work around but no cure. Could I setup another internal proxy server (linux based) which store my LDAP user name/password in order to access the external resource and all Windows8 machine shall point the proxy to this Linux proxy server so it can use my LDAP user name/password.

View 1 Replies View Related

Limited Access - After Windows 7 Service Pack 1 Update?

Dec 2, 2012

My HP laptop was working perfectly using wireless Internet but after an update of the SERVICE PACK 1 it now isn't working. It connects to the Internet but it says 'LIMITED ACCESS'. It's clearly something to do with that update as the Internet works perfectly on all over devices in the house

View 3 Replies View Related

Cisco VPN :: After Windows Update KB2675157 ActiveX RDP Through SSL VPN Stops

May 10, 2012

We have a Cisco ASA 5510 with Clientless SSL VPN portal. I just found that after installing the last Microsoft Updates, RDP bookmarks stopped working. It keeps asking that I should install Cisco Portforwarder control, and then goes back to the home page. I changed all security settings, tried to install the control manually, but nothing works. Finally, I found that after uninstalling Internet Explorer 8 update KB2675157 it works again.

View 7 Replies View Related

Cisco Wireless :: 5508 Firmware 7.1.91.0 Update - Windows 8 MFP Bug

Mar 8, 2013

I recently upgraded to firmware version 7.1.91.0 on my 5508 controllers to allow support for 3600 WAPs and WCS. We have recently run into bug CSCua29504 which prevents Windows 8 devices from joining my wireless network due to a Management Frame Protection issue.
 
Firmware updates have been released for 7.0,7.2,7.3 and 7.4 trains to resolve the fault, however there hasn't been a release for 7.1. Any update for the 7.1 firmware to address bug ID CSCua29504?

View 2 Replies View Related

Cisco VPN :: Asa 843 After Windows Update RDP Through Clientless VPN Stop Working

May 16, 2012

I know about recomendation to update a system software! Here is my software version and rdp plug-in version: asa843-k8.bin, rdp-plugin.120424.I also tried to use previous version of rdp plug-ins, but connection through RDP still not work normally! 90 percent of the attempts to give a black screen.

View 1 Replies View Related

Dell :: XPS 8500 - No Wireless Access After Windows 7 Update

Nov 23, 2012

I have a XPS8500 with Win7 64bit and  last week entered internet via wlan without problems. After an automated update I get a "limited connectivity" despite excellent signal strength. If I restore the system to 15:16 settings, everything works fine. However after a restart I am confronted with "limited connectivity" again.

View 1 Replies View Related

Dell :: Loss Of Networking On Inspiron 560 After Windows Update?

Nov 28, 2012

INS 560 working fine until Windows Update installed recent Windows 7 updates.

After restart I now have a red 'X' through the Tray Connection Icon and no networking (LAN & Internet).

The Status of the Network Adapter is 'Working Properly'.

System Restore rolls back okay to before updates but as soon as Windows Update runs we have the same problem.

I've re booted into Ubuntu and the Network Adapter works fine.

View 6 Replies View Related

Linksys Wireless Adapters :: AE1000 - How To Update Driver On Windows 7 64-Bit PC

Apr 24, 2013

I have an E1000 router and have updated the firmware to v2.1.02 Build 6.  Also have the AE1000 Wireless-N Adapter and wanted to see if there were any new updates.  According to this Linksys page the latest driver is Ver.3.1.12.0 (04/27/2012).  I have downloaded the file and unzipped it to the desktop.   
 
I am running Win 7 64-Bit so I opened this folder: C:UsersJOHNDesktopAE1000_Win7_3.1.12.0-WHQLWin7_64_v3.1.12.0
 
Which file will actually install the new driver:

netr28ux Security Catalog 9 kb; netr28ux Setup Info 11 kb; netr28ux.sys System File 1,563 kb; RaCoInst.dat DAT File 14 kb; RaCoInstx.dll Application Extension 320 kb 

View 5 Replies View Related

Dell :: Windows Update Stops LAN And WAN Adapters On Alienware M14X

Sep 30, 2012

I just bought an alienware M14x and about 3 weeks after i set it up the LAN and WAN adapters stopped working and i couldn't get a wireless connection or hardwired connection.

I called technical support and they informed me it was due to a generic windows update that wasn't really compatible with my alienware machine. So i did a system restore and now its working fine and i disabled automatic updates.

Its been about a month since then and now I have all these updates that need to be downloaded and I'm not sure which one will cause my network adapters fail again.

View 2 Replies View Related

Sony Vaio SVE151B11W - How To Update Windows 7 Home Basic To Ultimate

Sep 5, 2012

i am having a sony vaio SVE151B11W with windows home basic.i have a atheros bluetooth driver,will a driver of different company work fine?

View 1 Replies View Related

Linksys Wireless Router :: Cisco WRT160N V3 Is Not Permitting Windows 7 To Update?

Oct 17, 2011

My Cisco Linksys WRT 160N V3 is not permitting my Windows 7 to update.I know the problem is the router, because without it, I can update Windows 7 normally. My antivirus program is Avast?

View 1 Replies View Related

Linksys Wireless Adapters :: WMP600N Windows Update Doesn't Work Well

Jan 29, 2013

The latest driver is version 3.2.7 for Windows 7. I am still on the 3.0.2.0 driver which works fine for me. I just wanted to note that the 3.2.7 driver obtained from Windows Update doesn't work well, drops connections and takes longer to establish a connection. I've tried to update twice and each time I go back to the older driver.Can someone at Linksys examine the performance of this driver?

View 9 Replies View Related

Belkin Routers :: Update N750 When Internet Won't Work With It Connected?

Jun 4, 2013

How can I update my router if my Internet won't work with the router connected? Right now my Ethernet line is going directly from my PC to my modem. Belkin N750.

View 1 Replies View Related

Zoom Adsl X6 Model 5590 - Internet Not Working After Attempting To Update Routers Firmware

Jun 21, 2011

I have a Zoom adsl x6 model 5590 wireless router. I recently tried to update its firmware by following the instructions from the manufacturers site. Everything seemed to go correctly, but I am now unable to connect to the internet or my routers http address. My router now has a red power light along with a solid green light for the wlan and dsl.

View 2 Replies View Related

No Internet After Windows Format

Oct 17, 2012

I've recently performed a full formate on windows, which removed everything (including internet drivers) cause i was having problems with my system drivers, installation worked out well, but now when i tried adapting my internet cable and having my pc recognized my internet connection, it didn't work my laptop can't seem to find any connection even with the cable plugged in, i've tried different cables, ethernet gates but he still doesn't recognize it. I tried to establish a new internet connection, which required a pass and name our internet provider gave us, tested that out and he still can't find or connect to any internet, all with cable having plugged in

does anybody know how to establish my internet connection?

View 7 Replies View Related

Windows XP Pro - Cannot Connect To Internet

Apr 23, 2012

My Windows xp professional pc to router via ethernet cable. PC says connected to internet.

View 7 Replies View Related

Windows XP Cannot Connect To Internet

Apr 30, 2012

I have a spare PC, monitor, mouse, keyboard etc I said he can use that instead as I don't really need it now I have my Windows 7 machine.So I formatted XP on my spare machine to start afresh, purchased a cable to run from the router to the spare pc (which is connected to the modem) and the other cable runs from the router to my PC, hence I can type this. Since I can get online it isn't an ISP/router/modem issue, so that's clear.When I installed XP on my now spare PC I did have to fiddle to get the internet working?The PC motherboard is an HP Compaq d230 MT, and the steps I have taken is:From this website [URL]

1. Installed Chipset driver
2. Installed Broadcam Network driver
3. Installed Gigabit Network driver
4. Installed 56k win driver (wasn't sure if it's needed though)
5. re-started PC

It still doesn't work, and under device manager, the Ethernet Controller has a yellow question mark. Opening it up, it says there is no driver installed and says (code 28)

View 4 Replies View Related

Can't Connect To The Internet In Windows 7?

Oct 20, 2011

I cannot get my computer to connect to the internet including, but not limited to system restoring to an earlier restore point prior to developing the problem. Doing a system recovery which basically reset everything to manufacturers (except the internet connection). Following several sets of directions which seemed like they might apply to me including manually entering the ip info into my LAN.The latest attempt was to try to "reset my winsock catalogue" with: netsh int ip reset catalog command in cmd. This resulted in a list of errors stating that the commands had to be Run as an administrator. As I am logged in as administrator on the computer, I'm not sure how to rectify this latest little bit of folly.

View 14 Replies View Related

Connect To The Internet On Windows Ce 5.0?

Oct 23, 2011

i have recently bought one of these netbooks, im not very good at this sort of thing so trying to learn, im trying to get on the internet but when i click the internet explorer option in just comes up with a sign saying "THE PAGE CANNOT BE DISPLAYED, you may need to adjust your browser settings", my partner has a laptop here at home with me that is wireless so i dont know whether or not i can run it off this??do i need to go into some sort of option in my network settings?

View 3 Replies View Related

Sharing Internet Windows 7 To XP?

Aug 30, 2012

So i'm trying for 4 hours to give internet to my PC with windows XP (installing windows 7 not an option) but it seems impossible, i'm getting an error that says:Limited or no connectivity, and the network it's not receiving any packages it's only sending could it be the cable?

View 9 Replies View Related

Windows 7 Cannot Connect To The Internet?

Aug 23, 2012

I am running Windows 7 on an Alienware M11x computer, and, as seen above, I am having problems connecting to the internet. It shows that I have obtained a signal, but a yellow triangle says, "No internet connection available".

View 7 Replies View Related

How To Get Windows 7 To Use Specified Internet Connection

Jun 8, 2012

I have a LAN adapter and a USB wireless internet connection. When both connected windows 7 always uses the USB. I tried changing the metric values but no luck. Currently automatic metric on all adapters.LAN connected. ipconfig shows that it is connected to the correct ip/dns/gateway etc. IPv4 Route table shows Metric 24 Then connected USB. ipconfig shows USB connectivity then LAN in that order. Internet is now through USB. IPv4 Route table shows Metric 4249 for LAN and USB is 41. Gateway for USB shows "on-link". netstat -rn shows USBDEVICE on top.Changed LAN metric to 5 and now the route table shows LAN as 9 (not sure why it added 4) and USB as 41.

Netstat shows LAN then USB. ipconfig shows LAN then USB.But still connection is through USB. How do I know? Task manager shows utilization only through USB as well as speed is showing around 1mbps rather than LANs 10mbps. How can I get win7 use LAN while USB is connected. I am just trying to use USB as a backup just in case I lose LAN connection.I thought i will make USB metric manually to say 10. But it says I have to reconnect for it to be effective. Currently USB still shows below LAN and still has 9 and 41 in the table.Disconnected USB. Table shows LAN metric as 24 (Not sure why it got changed from 9 and setting got reverted by to automatic)Reconnected USB. Now in the setting still shows 10 and the route table shows 11 for USB and LAN shows 4249 (settings shows 4245, 4 less))For some reason restarting USB is resetting LAN setting when reconnected.

View 1 Replies View Related

Internet Sharing Between XP And Windows 7?

Feb 22, 2011

I recently moved my computer from my home to my girl friend's house, and there is a minor problem. The laptop that has win7 already is in a homegroup. For some reason my computer(win7) does not want to connect to their homegroup. But I moved past that. Now I am trying to connect to her computer. She has Win xp. I used the same Ethernet cord from my house that I used to share internet over at her house, and I cannot seem to find out what is wrong. On the win7 it says Unidentified network-No Internet Access, and on the XP it says limited or no connectivity. I set the XP ICS to on (share) for the Ethernet port. The XP has the internet and is using a USB wireless adapter to a router. My computer is way to far from the router and neither can be moved.

Notes: I can share files, but no internet can be passed. XP = Host and Win 7 = Client

View 3 Replies View Related

Windows 7 Not Connected To Internet

Feb 17, 2013

I'm using a laptop with windows 7. I can connect to wireless connection at home and elsewhere. However, when I'm at my boyfriend's place, I can't seem to get on the internet. It shows connected but it doesn't allow me to get onto any site. I've tried searching for answers, cleared dns and all sorts of possible solutions but none works.

View 1 Replies View Related

Windows 7 Internet Disconnect?

Aug 9, 2012

My desktop is connected to the internet through my home's wireless network and every time I log into an online game it disconnects me from the internet.This happens without signal loss or other warning signs from Windows, but my in-game ping spikes until I disconnect and I am unable to access the internet through my regular browser.I am still able to access the internet through other devices and am able to play the game through another computer which runs windows vista.All drivers and firmware are up to date.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved