No Internet After Windows Format

Oct 17, 2012

I've recently performed a full formate on windows, which removed everything (including internet drivers) cause i was having problems with my system drivers, installation worked out well, but now when i tried adapting my internet cable and having my pc recognized my internet connection, it didn't work my laptop can't seem to find any connection even with the cable plugged in, i've tried different cables, ethernet gates but he still doesn't recognize it. I tried to establish a new internet connection, which required a pass and name our internet provider gave us, tested that out and he still can't find or connect to any internet, all with cable having plugged in

does anybody know how to establish my internet connection?

View 7 Replies


ADVERTISEMENT

No Internet After Format And Reinstall OS Windows 7?

Feb 5, 2012

After formatting and reinstalling my Windows 7 64-bit OS on my hard drive, it can't connect to the internet. It says the Network Adapter is not found, so I plugged in my old hard drive and went on the internet to download the proper driver install for my network adapter, but there's one problem.I don't have an extra sata cable to connect them both at the same time so I can transfer the driver software from one hard drive to the other, and since the internet isn't working on the one I need to install the driver on, uploading it to a website obviously isn't an option.

View 1 Replies View Related

Format 60 Computers Over LAN?

Apr 11, 2013

I need to format about 60 computers and they are all networked. Its tedious to walk around to each of them with removable media devices doing it.

View 1 Replies View Related

Wireless :: Converting EXE File To SIS Format?

Jun 22, 2011

How can I convert exe file to sis format.

View 1 Replies View Related

Protocols / Routing :: How To Get PBB CFM Packet Format

Oct 13, 2012

How to get the packet format of CFM used in the provider backbone domain having ethertype (0x88e7) & Itag fields in it. I think wireshark doesnt have this code implemented yet.

View 1 Replies View Related

Routers / Switches :: How To Format IPv6

Feb 6, 2011

want to know how to format IPv6

View 1 Replies View Related

Format HDD In NTFS For Media Player

May 3, 2011

How do I format the external HD in NTFS so may media player can read it as the meadi player viewsonic can only read NTFS or EXT3 my hard drive is FAT 32.

View 1 Replies View Related

Cisco :: Can't Format Compact Flash 512MB?

Aug 4, 2011

cant format compact flash, 512MB,at boot is says

Loading disk0:/asa841-51-k8.bin... Booting...
Platform ASA5510

Loading...IO memory blocks requested from bigphys 32bit: 13008 dosfsck 2.11, 12 Mar 2005, FAT32, LFN

here ---> Currently, only 1 or 2 FATs are supported, not 64.

dosfsck(/dev/hda1) returned 1
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
open /dev/hdb1:No such file or directory
dosfsck(/dev/hdb1) returned 1
mount: mounting /dev/hdb1 on /mnt/disk1 failed: No such file or directory
mount: mounting /dev/hdb1 on /mnt/disk1 failed: No such file or directory Processor memory 868220928, Reserved memory: 62914560

what does this mean?Currently, only 1 or 2 FATs are supported, not 64.

View 1 Replies View Related

Alienware M11x - Missing Different Programs After Format

Jun 17, 2012

I currently reformatted my Alienware laptop with the window7 64bit which was provided with my laptop at purchase. Now after I finish formatting the laptop I was missing a lot of programs like the dell ones and the Alienware software which change the colour of my desktop and so on... Is there a way of getting these programs back ?

View 1 Replies View Related

Cisco WAN :: 1841 / Unknown Format In Console

Aug 17, 2012

I have got a problematic 1841 router. I connected it with console cable and use HyperTerminal application with

BPS: 9600
Data Bits: 8
Parity None
Stop Bits: 1
Flow Control: None
 
but the displays shows as follows. What may be the problem ? I can't see the English language, what to do now ?
  
ËŠª¨GÌÍ(W•³•BÜ΍£¥õ«©¡«©¡Gf­GMèF£eˆ)¯+%©§§Mr§j‹ ï(MŽV»øìõ3B…«»v£FÝ=;VOèF£eˆ
)¯+%©)§N N'vnjj»³6r³h-Bãeˆ)¯+%©)'f¾.zN' ~R5ˆîïÝèv®V££õ£ë£'%3Þ££õF£ÈMèF£eˆ)¿+
%/]'fnno/?míHv£îïÝèv®V££õ£Œî£'%3v££õþ

View 3 Replies View Related

Cisco AAA/Identity/Nac :: ACS 4.2 - Convert Dmp File To Another Format?

Jun 16, 2011

Is there a way where I can just export the clients from one server and restore them onto another?
 
Is tehre maybe a way to convert the dmp file to another format, like csv, then modifying it and converting back to dmp?

View 3 Replies View Related

Dell :: Vostro 3700 Wi-Fi Not Working After Format?

Dec 4, 2010

I bought a Vostro 3700 which i formatted and installed windows 7 using the CD which came with the laptop. I used the drivers CD which also came with the laptop to install the drivers but i am still having trouble with the network controller. On the device manager list it still says its not intalled and as a result i have been unable to use the wireless. When i try to install the wireless drivers an error message comes up saying no compatible hardware found, but the wireless worked fine before the format!

View 15 Replies View Related

D-Link DIR-655 :: Router Configuration File Format Difference Between Rev A And Rev B

Mar 31, 2011

I've owned the Rev A DIR-655 for years and have loved it, but recently it started acting up. I have a complicated setup saved as a gateway settings file (.gws).  I decided to purchase a new DIR-655 for the ease of importing my settings without having to manually setup again, however, much to my dismay, the new file format for the configuration settings on the Rev B is not .gws but rather .bin.  The .gws file will not import. I tried changing the file extension to .bin with hopes it might import but no luck. I also found the utility which decrypts the .gws file into .xml and used those values to manually re-enter the settings into the Rev B router, but my port forwarding is not working the same.  I was wondering if there is any utility to convert the .gws file to the .bin file in order to import into the Rev B router, or if not, can I still purchase the Rev A model somewhere. The online shops I've checked do not list the hardware version. 

View 7 Replies View Related

Cisco Switching/Routing :: Does 3750 Support New ASN Format

Sep 17, 2012

I have a 3750 running 12.2(55) and  when I configure BGP I only get the standard AS number choice of 1-65535, but my provider is supplying a 4-byte AS number which is six digits and it gets rejected at the prompt on the 3750. Does that mean no support on 3750

View 1 Replies View Related

Cisco :: LMS3.2 Software Distribution File Format?

Aug 23, 2011

in RME->Software Management-> Software Distribution -> By Devices [advanced],  what is the file format we should have here, when we try to deploy many IOS images at once?

View 1 Replies View Related

Wireless :: Format Hard-drive And Reinstall XP Pro / USB Ports Don't Work?

Jan 2, 2012

Purchased desktop from micropro in 2002. We finally upgraded to cable internet in 2011, Wife purchased Think Pad laptop also in 2011 (wireless enabled). Purchased Belkin wireless router and want to network these 2 computers.1. My desktop has been demoted to the garage. I have wiped it clean (i hope) by doing a reinstall of XP Pro. Now some of the USP ports won't work. How do I network these two machines?

View 1 Replies View Related

Cisco Switching/Routing :: 3725 - Format CF Card On 1841

Dec 26, 2011

I have 3725 router with internal CF and external slot for CF. I tried upgrading and ended up deleting the iOS version on the internal flash, and can not now put the iOS back!! I turned it off.... so there was no active iOS..
 
I have tried formatting the CF card on an 1841 but the 3725 won't read it. It is obviously stuck at ROMMON
 
What is the correct way to format a CF card so my 3725 will read it and I can get an iOS back on it!!

View 1 Replies View Related

Cisco Switching/Routing :: 4507r / Format Of Flash Caused 100% CPU?

Jul 21, 2012

I had an issue today on a 4507r today where when I formatted the compact flash in slot0: (512mb) it caused the CPU to spike to 100% this took about 1.5 hours and did not cause adjacency loss or any thing, but was worrisome. This was a sup IV  is this normal and should u let it complete like I did?  Also when I copied the os to it from boot flash it caused the same behavior.   I have done this a bunch in 6500 sup 720 without this issue?

View 3 Replies View Related

Cisco Infrastructure :: 1812 - Flash Space Not Free After Format

Jul 29, 2012

I just received a 1812 model unit flash memory C class.
 
I cannot free the space from CF; after format, I receive the same amount of space:
 
Cisco-1812-II#show flash:
14450688 bytes available (17489920 bytes used)
Cisco-1812-II#format flash:
Format operation may take a while. Continue? [confirm]
Format operation will destroy all data in "flash:".  Continue? [confirm]

[Code].....

View 9 Replies View Related

Cisco Routers :: Configuring VPN (invalid IP Address Format) With SRP527W?

Oct 24, 2011

I'm tryng to configure a vpn with a cisco small business pro router, model srp527W-k9-g5 But when i try to set the “remote ip”  in Remote traffic selection a I have to set (10.0.0.0) a message said:
 
“Invalid IP Address Format” 
 
If i change the ip and i put 10.0.0.1 i have not error but I have to put 10.0.0.0 and if i configure it on a cisco WRV210 (por example) i have no error.

View 1 Replies View Related

Cisco Routers :: RVS4000 - Format To Input Into ACL Rule Range

Feb 18, 2012

I have read through the manual. My question is what is the proper format to input into the ACL rule "Range"?  Would as an example work- 192.168.0.1 - 192.169.255.254? Will the range effectively work? Or does it have to be 192.168.0.0 - 192.169.255.255?

View 7 Replies View Related

Cisco Firewall :: ASA 5520 - Chassis Serial Number Not In Right Format

Oct 24, 2011

I have a faulty ASA5520 and I am not sure if I have a SMART net contract for it or not (I manage over 200+ ASAs). The problem is that the Serial Number sticker that is normally on the back of the ASA is missing. The ASA5520 is also faulty and doesn't power on so I cannot boot it up and run 'show ver' or similar. If I open the chassis there appears to be other Serial numbers on the Power Supply, and Motherboard etc but they do not seem to be the correct Chassis serial number i.e not in the right format, and if I put them into the Trade tool I get no results.
 
There must be another record of the serial numbers besides 1x sticker to the rear of the chassis that can fall off? How I can get the chassis serial when the device isn't booting. or (Cisco) is there a way to find the chassis serial number from the power or motherboard serial?

View 4 Replies View Related

Linksys Wireless Router :: E4200 How To Format Drive For Web Based Utility

Apr 28, 2011

How do you format the drive for this with the routers web based utility?  Or do you just do this while its plugged into your PC then connect it to the router.   I know how to format the drive with the web based utility using the FAT system but its limited to 4gb files.

View 8 Replies View Related

Linksys Wireless Router :: WRt610N Disk Storage File Format?

Mar 25, 2012

I have a 1 TB external drive plugged into my WRT610 and want to access the drive from both Mac and PC. I recently upgraded the Mac to Lion and they no longer enable Time Machine to back-up to a network attached drive (Ugh!). I thought a simple work around would be to clone the drive, but the FAT file format does not allow a file size greater than 4 GB. So I seem stuck.Can the router be configured to enable exFat file format for storage? I have the back-up drive in an obsecure location (this is why I want to access the drive over the network) and would hate to relocate the drive to a more visible location.

View 1 Replies View Related

Cisco Switching/Routing :: Catalyst 2960S Format Flash Failure?

Jan 3, 2013

I recently tried to manually format the flash on a model WS-2960S-48TS-L switch running IOS version 15.0(2)SE.  While executing the operation I got the following error - mifs[8]: Failed to create superblock  %Error formatting flash (I/O error).As a result the flash is no longer accessible by the switch.  I spoke with Cisco and they indicated that a switch reload would remount the flash and make it accessable again but the .bin file would need to be reloaded using the xModem recovery procedure (what a pain).The next IOS version 15.0(2)SE1 will supposedly fix this bug but it has not been released yet.  In the meantime if you are running 15.0(2)SE you may want to hold off performing a "format flash:" function on a 2960S.

View 3 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.1 Import Template Gives File Format Validation Failed

Sep 21, 2011

Network Resources - Network Devices and AAA Clients- File Operations - Add - gives me File Format Validation Faliled. I am carefull to leave the header as it is. The header in the Import Template looks faulty, see attached. When exporting devices I also get the same header as attached. I also tried to change the header so its all in one column, but with same result.

View 1 Replies View Related

Cisco Switching/Routing :: Catalyst 3550 / IOS Naming Format Conversion

Jun 11, 2012

correlates the older IOS format naming compared with the newer? I have an older catalyst 3550 that might need an IOS upgrade due to us starting to implement dot1x. The reason that I say this is that some of the commands in the dot1x config guide, such as aaa accounting dot1x, are not valid on this platform. The current IOS is c3550-i5q3l2-mz.121-8.EA1c but the newer format is the ipbase, ipservices, etc. format. There is a newer ios but how do I convert from one to the other? I think I need to research the IOS to see if the new commands are there as well as I want to make sure there are no gotchas from a hardware standpoint if I upgrade.
 
Cisco Internetwork Operating System Software IOS (tm) C3550 Software (C3550-I5Q3L2-M), Version 12.1(8)EA1c, RELEASE SOFTWARE (fc1)Copyright (c) 1986-2002 by cisco Systems, Inc.Compiled Fri 15-Feb-02 10:50 by antoninoImage text-base: 0x00003000, data-base: 0x006675E0
ROM: Bootstrap program is C3550 boot loader
ACSTMElab-3550 uptime is 20 minutesSystem returned to ROM by power-onSystem image file is "flash:c3550-i5q3l2-mz.121-8.EA1c/c3550-i5q3l2-mz.121-8.EA1c.bin"
cisco WS-C3550-24 (PowerPC) processor (revision C0) with 65526K/8192K bytes of memory.Processor board ID CHK0615V0BPLast reset from warm-resetBridging software.Running Layer2/3 Switching Image

[code]....

View 1 Replies View Related

Cisco Switches :: SGE2000 Illegal Software Format - Firmware Upgrade

Jan 10, 2012

I am trying to update the SGE2000v1.0 with 24ports to  3.0.1.0: url...I got the error "illegal software format" using tftp.

View 2 Replies View Related

Linksys Wireless Router :: E4200 USB Port / Recommended Format Of The Attached HD Drive / 512 Or 4K?

Sep 8, 2011

what is the recommended format of the attached HD drive, 512 or 4K ?

View 6 Replies View Related

Linksys Wireless Router :: E4200 - 720p Or 1080p MKV Files / Unrecognized Format

Aug 14, 2011

I just wanted to know if it's possible to playback mkv's either 720p or 1080p using the media server built in to a E4200 and streamed to a ps3? Everything is setup, the ps3 can see twonky, and has access to the external HD connected to the E4200, but upon choosing any type of mkv all i get is unrecognized format.... Avi's and mp3's all seem to be okay, as does iso's. Only I thought I read somewhere that it supports streaming HD material. p.s. the E4200 came with the latest .13 firmware. although I didn't put it on there, as I picked it up cheaply as it was a returned unit to the store.as this is supposed to be an upgrade from a wrt54gr that was used with ps3mediaserver, but struggled with 1080p's.

View 6 Replies View Related

Belkin Routers :: N150 Firmware Upgrade Giving File Format Error

Mar 19, 2013

I bought belkin N150 recently. I tried to configure with my ISP. They are surprised how I don't have DHCP option in the wifi configuration and asked me to upgrade my firmware. When I tried to upgrade. I downloaded the firmware from [URL] tried to upgrade. It is showing file format error.

View 2 Replies View Related

Cisco Firewall :: 5505 - Bootnet Filter No Longer Functions After Disk Format

Jul 2, 2011

I was having major issues with a 5505 (too long a discussion to go into here) so I formatted the disk and uploaded fresh binaries and recreated my configuration. I noticed the licenses were preserved. I also noticed there were several fsck records after the format that were reclaiming lost chains. I suspect the flash on this ASA is going bad, since everytime it boots it says "reading from flash ..!!" like it cannot even read flash successfully. When I purchased this one new, it also had several fsck records being brand new. I'm going to open a case on these flash issues/questions.
 
Anyway, after all of the above, the only thing that is not working is the botnet filter. [code]

View 4 Replies View Related

Cisco WAN :: Implementation Of Short Sequence Number Format Support In PPP Multilink Header For MWR 2941

Jun 11, 2012

One of my customer has raised a new requirement for implementation of short sequence number format support in PPP multilink header for Cisco MWR 2941 E1/T1 serial interface, whereas router is supporting long sequence number format.here is the output of "debug ppp negotiation" command:-Currently in the MWR debugging logs we can see that by default MWR is sending long sequence header format as below
 
*Mar 13 01:32:55.438: Se0/2:0 LCP: O CONFREQ [REQsent] id 238 len 25
*Mar 13 01:32:55.438: Se0/2:0 LCP:    MagicNumber 0x26CDF693 (0x050626CDF693)
*Mar 13 01:32:55.438: Se0/2:0 LCP:    MRRU 1500 (0x110405DC)
*Mar 13 01:32:55.438: Se0/2:0 LCP:    EndpointDisc 2 16.16.16.11 (0x1307021010100B)
*Mar 13 01:32:55.438: Se0/2:0 LCP:    MultilinkHdrFmt seq long classes 2 (0x1B040202)
 
While as per the requirement  PPP multilink header should support short sequence. 
 
MWR configuration:
 
controller E1 0/2
framing NO-CRC4
clock source line
channel-group 0 timeslots 1-31

[code]....

View 0 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved